aboutsummaryrefslogtreecommitdiff
path: root/target-s390x/helper.c
AgeCommit message (Collapse)AuthorFilesLines
2015-02-18s390x/helper: Remove s390_cpu_physical_memory_mapThomas Huth1-25/+0
The function is now not used anymore, so it can be removed safely. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-18s390x/mmu: Skip exceptions properly when translating addresses for debugThomas Huth1-5/+3
When a fault occurs during the MMU lookup in s390_cpu_get_phys_page_debug(), the trigger_page_fault() function writes the translation exception code into the lowcore - something you would not expect during a memory access by the debugger. Ease this problem by adding an additional parameter to mmu_translate() which can be used to specify whether a program check and the translation exception code should be injected or not. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-18s390x/mmu: Move mmu_translate() and friends to separate fileThomas Huth1-322/+1
helper.c is quite overcrowded already, so let's move the MMU translation to a separate file instead (like it has been done with the other targets already). Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-16qemu-log: add log category for MMU infoAntony Pavlov1-2/+2
Running barebox on qemu-system-mips* with '-d unimp' overloads stderr by very very many mips_cpu_handle_mmu_fault() messages: mips_cpu_handle_mmu_fault address=b80003fd ret 0 physical 00000000180003fd prot 3 mips_cpu_handle_mmu_fault address=a0800884 ret 0 physical 0000000000800884 prot 3 mips_cpu_handle_mmu_fault pc a080cd80 ad b80003fd rw 0 mmu_idx 0 So it's very difficult to find LOG_UNIMP message. The mips_cpu_handle_mmu_fault() messages appear on enabling ANY logging! It's not very handy. Adding separate log category for *_cpu_handle_mmu_fault() logging fixes the problem. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Alexander Graf <agraf@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1418489298-1184-1-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-10target-s390x: fix possible out of bounds readzhanghailiang1-3/+3
Array index starts at 0, so the valid index of ext_queue array, io_queue array, mchk_queue array should be MAX_EXT_QUEUE - 1, MAX_IO_QUEUE - 1, MAX_MCHK_QUEUE - 1. The original checks missed the invalid bound value, which will lead possible out of bounds read in the follow codes. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-10-10s390x/kvm: proper use of the cpu states OPERATING and STOPPEDDavid Hildenbrand1-12/+7
This patch makes sure that halting a cpu and stopping a cpu are two different things. Stopping a cpu will also set the cpu halted - this is needed for common infrastructure to work (note that the stop and stopped flag cannot be used for our purpose because they are already used by other mechanisms). A cpu can be halted ("waiting") when it is operating. If interrupts are disabled, this is called a "disabled wait", as it can't be woken up anymore. A stopped cpu is treated like a "disabled wait" cpu, but in order to prepare for a proper cpu state synchronization with the kvm part, we need to track the real logical state of a cpu. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> CC: Andreas Faerber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-09-25target-s390x: Use cpu_exec_interrupt qom hookRichard Henderson1-0/+13
Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1410626734-3804-9-git-send-email-rth@twiddle.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-05softmmu: introduce cpu_ldst.hPaolo Bonzini1-0/+1
This will collect all load and store helpers soon. For now it is just a replacement for softmmu_exec.h, which this patch stops including directly, but we also include it where this will be necessary in order to simplify the next patch. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-20s390x/kvm: hw debugging support via guest PER facilityDavid Hildenbrand1-0/+12
This patch makes use of the hw debugging support in kvm (provided by the guest's PER facility) on s390. It enables the following features, available using the gdbserver: - single-stepping - hw breakpoints - hw watchpoints Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-05-07s390x/helper: Added format control bit to MMU translationThomas Huth1-18/+52
With the EDAT-1 facility, the MMU translation can stop at the segment table already, pointing to a 1 MB block. And while we're at it, move the page table entry handling to a separate function, too, as suggested by Alexander Graf. Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-05-07s390x/helper: Fixed real-to-absolute address translationThomas Huth1-3/+15
The real-to-absolute address translation in mmu_translate() was missing the second part for translating the page at the prefix address back to the 0 page. And while we're at it, also moved the code into a separate helper function since this might come in handy for other parts of the code, too. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-03-13cputlb: Change tlb_set_page() argument to CPUStateAndreas Färber1-1/+1
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13exec: Change cpu_abort() argument to CPUStateAndreas Färber1-9/+14
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Move exception_index field from CPU_COMMON to CPUStateAndreas Färber1-20/+19
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Turn cpu_handle_mmu_fault() into a CPUClass hookAndreas Färber1-8/+12
Note that while such functions may exist both for *-user and softmmu, only *-user uses the CPUState hook, while softmmu reuses the prototype for calling it directly. Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13target-s390x: Clean up ENV_GET_CPU() usageAndreas Färber1-3/+3
Commits f606604f1c10b60ef294f1b9b229426521a365e3, 2c17449b3022ca9623c4a7e2a504a4150ac4ad30 and 5ce5944dc0ffdc43c11b5cad11e526f699aabe4c added usages of ENV_GET_CPU() macro in target-specific code. Use s390_env_get_cpu() instead. Cc: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-11exec: Make stq_*_phys input an AddressSpaceEdgar E. Iglesias1-2/+6
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make ldq/ldub_*_phys input an AddressSpaceEdgar E. Iglesias1-1/+2
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2013-10-07cpu: Drop cpu_model_str from CPU_COMMONAndreas Färber1-3/+0
Since this is only read in cpu_copy() and linux-user has a global cpu_model, drop the field from generic code. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23cpu: Turn cpu_get_phys_page_debug() into a CPUClass hookAndreas Färber1-2/+3
Change breakpoint_invalidate() argument to CPUState alongside. Since all targets now assign a softmmu-only field, we can drop helpers cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd(). Prepares for changing cpu_memory_rw_debug() argument to CPUState. Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12cpu: Replace do_interrupt() by CPUClass::do_interrupt methodAndreas Färber1-5/+7
This removes a global per-target function and thus takes us one step closer to compiling multiple targets into one executable. It will also allow to override the interrupt handling for certain CPU families. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12cpu: Pass CPUState to cpu_interrupt()Andreas Färber1-2/+2
Move it to qom/cpu.h to avoid issues with include order. Change pc_acpi_smi_interrupt() opaque to X86CPU. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12cpu: Move halted and interrupt_request fields to CPUStateAndreas Färber1-2/+5
Both fields are used in VMState, thus need to be moved together. Explicitly zero them on reset since they were located before breakpoints. Pass PowerPCCPU to kvmppc_handle_halt(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16target-s390x: Move TCG initialization to S390CPU initfnAndreas Färber1-7/+0
Ensures that a QOM-created S390CPU is usable. Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16target-s390x: Introduce QOM realizefn for S390CPUAndreas Färber1-1/+3
Introduce realizefn and set realized = true in cpu_s390x_init(). Defer CPU reset from initfn to realizefn. Acked-by: Richard Henderson <rth@twiddle.net> [AF: Invoke parent's realizefn] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-13s390: Fix handling of iscs.Cornelia Huck1-1/+4
There are two ways to express an interruption subclass: - As a bitmask, as used in cr6. - As a number, as used in the I/O interruption word. Unfortunately, we have treated to I/O interruption word as if it contained the bitmask as well, which went unnoticed so far as - (queued-for-next) kvm made the same mistake, and - Linux guest kernels don't check the isc value in the I/O interruption word for subchannel interrupts. Make sure that we treat the I/O interruption word correctly. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-02-13s390: Keep I/O interrupts enabled for all iscs.Cornelia Huck1-19/+21
do_io_interrupt() would stop scanning further iscs if it found an I/O interrupt it could inject. This might cause the pending interrupt indication for I/O interrupts to be reset although there might be queued I/O interrupts for subsequent iscs. Fix this by reordering the logic: Inject the I/O interrupt immediately and continue searching all iscs for queued interrupts. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-02-04target-s390x: Fix wrong comparison in interrupt handlingStefan Weil1-1/+1
gcc with -Wextra complains about an ordered pointer comparison: target-s390x/helper.c:660:27: warning: ordered comparison of pointer with integer zero [-Wextra] Obviously the index was missing in the code. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-04s390x: silence warning from GCC on uninitialized valuesAnthony Liguori1-1/+1
As best I can tell, this is a false positive. [aliguori@ccnode4 qemu-s390]$ make CC s390x-softmmu/target-s390x/helper.o /home/aliguori/git/qemu/target-s390x/helper.c: In function ‘do_interrupt’: /home/aliguori/git/qemu/target-s390x/helper.c:673:17: error: ‘addr’ may be used uninitialized in this function [-Werror=maybe-uninitialized] /home/aliguori/git/qemu/target-s390x/helper.c:620:20: note: ‘addr’ was declared here /home/aliguori/git/qemu/target-s390x/helper.c:673:17: error: ‘mask’ may be used uninitialized in this function [-Werror=maybe-uninitialized] /home/aliguori/git/qemu/target-s390x/helper.c:620:14: note: ‘mask’ was declared here cc1: all warnings being treated as errors make[1]: *** [target-s390x/helper.o] Error 1 make: *** [subdir-s390x-softmmu] Error 2 Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01target-s390x: Pass S390CPU to s390_{add, del}_running_cpu()Andreas Färber1-2/+3
This prepares for moving the halted field to CPUState. Most call sites can already supply S390CPU, for some env becomes unused. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-02-01target-s390x: Clean up cpu_inject_*() signaturesAndreas Färber1-2/+4
Despite cautioning that S390CPU is needed for upcoming CPUState refactorings, commit 5d69c547d947798cba92d836d06f6e017ba2b19d (s390: I/O interrupt and machine check injection.) added functions cpu_inject_io() and cpu_inject_crw_mchk() with CPUS390XState argument, claiming consistency with cpu_inject_ext(). This complicates making cpu_interrupt() take a CPUState even more and it required to pass &cpu->env from some S390CPU-aware call sites already, creating inconsistency elsewhere. Address that. This also eliminates the need for CPUS390XState in s390_virtio_irq(). Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-02-01target-s390x: Fix debug outputAndreas Färber1-1/+1
Commit 71e470886fb6092504503a5fe41092ace71c096c (target-s390x: fix style) renamed the cpu_s390x_handle_mmu_fault() argument from _vaddr to orig_vaddr. Update the debug output code. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-02-01target-s390x: Fix debug output (continued)Andreas Färber1-2/+2
Since its introduction in d5a439645a5a70fed5431318c3bce9dc2caa950f (s390x: helper functions for system emulation) the variable name was raddr. Fix this. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-29s390: I/O interrupt and machine check injection.Cornelia Huck1-0/+141
I/O interrupts are queued per isc. Only crw pending machine checks are supported. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-29s390: Add mapping helper functions.Cornelia Huck1-0/+25
Add s390_cpu_physical_memory_{map,unmap} with special handling for the lowcore. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-29s390: Lowcore mapping helper.Cornelia Huck1-9/+25
Create a lowcore mapping helper that includes a check for sufficient length. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-05target-s390: Reorg exception handlingRichard Henderson1-30/+28
Make the user path more like the system path. Prepare for more kinds of runtime exceptions. Rename ILC to ILEN to make it clear that we want to pass around a full instruction length, rather than a "code" that happens to be stored one bit left in a larger field. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-01-05target-s390: Fix PSW_MASK handlingRichard Henderson1-4/+5
We were treating psw.mask as the 32-bit quantity it is in ESA mode. In particular, the CC field was at the wrong place. Signed-off-by: Richard Henderson <rth@twiddle.net>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19exec: move include files to include/exec/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity1-4/+4
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-27target-s390x: Use CPU_LOG_INTRichard Henderson1-3/+4
Three places in the interrupt code did we not honor the mask. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-10target-s390x: switch to AREG0 free modeBlue Swirl1-3/+3
Add an explicit CPUState parameter instead of relying on AREG0. Remove temporary wrappers and switch to AREG0 free mode. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> [agraf: fix conflicts] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: fix styleBlue Swirl1-47/+49
Before splitting op_helper.c and helper.c in the next patches, fix style issues. No functional changes. Replace also GCC specific __FUNCTION__ with standard __func__. Don't init static variable (cpu_s390x_init:inited) with 0. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-11target-s390x: Let cpu_s390x_init() return S390CPUAndreas Färber1-2/+2
Let cpu_init() return CPUS390XState for backwards compatibility. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-04Kill off cpu_state_reset()Andreas Färber1-8/+1
In commit 1bba0dc932e8826a7d030df3767daf0bc339f9a2 cpu_reset() was renamed to cpu_state_reset(), to allow introducing a new cpu_reset() that would operate on QOM objects. All callers have been updated except for one in target-mips, so drop all implementations except for the one in target-mips and move the declaration there until MIPSCPU reset can be fully QOM'ified. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for mb + cris) Acked-by: Alexander Graf <agraf@suse.de> (for ppc) Acked-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-04target-s390x: Update s390x_{tod,cpu}_timer() to use S390CPUAndreas Färber1-2/+4
In place of CPUS390XState pass S390CPU as opaque from the new initfn. cpu_interrupt() is anticipated to take a CPUState in the future. Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
2012-04-04target-s390x: QOM'ify CPU initAndreas Färber1-18/+3
Move code from cpu_s390x_init() into an initfn. Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
2012-04-04target-s390x: QOM'ify CPU resetAndreas Färber1-10/+2
Move code from cpu_state_reset() to s390_cpu_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
generated by cgit v1.1 at 2024-12-27 11:56:31 +0000