aboutsummaryrefslogtreecommitdiff
path: root/target-ppc/translate.c
AgeCommit message (Collapse)AuthorFilesLines
2014-06-27target-ppc: Remove unused gen_qemu_ld8s()Peter Maydell1-5/+0
The gen_qemu_ld8s() function is unused; remove it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27target-ppc: Remove unused IMM and d extract helpersPeter Maydell1-3/+0
Remove the definition of the IMM and d extract helpers; these seem to have been added as part of the initial PPC support in 2003 but never actually used. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27target-ppc: fixed translation of mcrxr instructionSorav Bansal1-2/+3
Fixed bug in gen_mcrxr() in target-ppc/translate.c: The XER[SO], XER[OV], and XER[CA] flags are stored in the least significant bit (bit 0) of their respective registers. They need to be shifted left (by their respective offsets) to generate the final XER value. The old translation code for the 'mcrxr' instruction was assuming that the flags are stored in bit 2, and was shifting them right (incorrectly) Signed-off-by: Sorav Bansal <sbansal@cse.iitd.ernet.in> Reviewed-by: Tom Musta <tommusta@gmail.com> Tested-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Add POWER8's FSCR SPRAlexey Kardashevskiy1-0/+7
This adds an FSCR (Facility Status and Control Register) SPR. This defines names for FSCR bits. This defines new exception type - POWERPC_EXCP_FU - "facility unavailable" (FU). This registers an interrupt vector for it at 0xF60 as PowerISA defines. This adds a TCG helper_fscr_facility_check() helper to raise an exception if the facility is not enabled. It updates the interrupt cause field in FSCR. This adds a TCG translation block generation code. The helper may be used for HFSCR too as it has the same format. The helper raising FU exceptions is not used by this patch but will be in the next ones. This adds gen_update_current_nip() to update NIP in DisasContext. This helper is not used now and will be called before checking for a condition for throwing an FU exception. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Fix Temporary Variable Leak in bctarTom Musta1-1/+1
Fix a temporary variable leak detected in the bctar instruction: Opcode 13 10 11 (4d910460) leaked temporaries Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16PPC: e500: Merge 32 and 64 bit SPE emulationAlexander Graf1-579/+132
Today we have a lot of conditional code in the SPE emulation depending on whether we have 64bit GPRs or not. Unfortunately the assumption that we can just recycle the 64bit GPR implementation is wrong. Normal SPE implementations maintain the upper 32 bits on all non-SPE instructions which then only modify the low 32 bits. However all instructions we model that adhere to the normal SF based switching don't care whether they operate on 32 or 64 bit registers and just always use the full 64 bits. So let's remove that dubious SPE optimization and revert everything to the same code path the 32bit target code was taking. That way we get rid of differences between the two implementations, but will get a slight performance hit when emulating SPE instructions. This fixes SPE emulation with qemu-system-ppc64 for me. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16PPC: SPE: Fix high-bits bitmaskAlexander Graf1-2/+2
The SPE emulation code wants to access the highest 32bits of a 64bit register and uses the andi TCG instruction for that. Unfortunately it masked with the wrong mask. Fix the mask to actually cover the upper 32 bits. This fixes simple multiplication tests with SPE guests for me. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Allow little-endian user mode.Doug Kwan1-91/+60
This allows running PPC64 little-endian in user mode if target is configured that way. In PPC64 LE user mode we set MSR.LE during initialization. Signed-off-by: Doug Kwan <dougkwan@google.com> Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Fix popcntb Opcode BugTom Musta1-1/+1
The popcntb instruction is erroneously encoded with opcode extension (opc1,opc2) = (0x03,0x03). Bits 21-30 of popcntb are 122 = 0b00011-0b11010 and therefore this should be encoded as (opc1,opc2) = (0x1A, 0x03). Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16PPC: Add dcbtls emulationAlexander Graf1-0/+12
The dcbtls instruction is able to lock data inside the L1 cache. Unfortunately we don't emulate any caches, so we have to tell the guest that its locking attempt failed. However, by implementing the instruction we at least don't give the guest a program exception which it definitely does not expect. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16PPC: Fail on leaking temporariesAlexander Graf1-0/+7
When QEMU gets compiled with --enable-debug-tcg we can check for temporary leakage. Implement the necessary target code for this and fail emulation when we hit a leakage. This hopefully ensures that we don't get new leaks. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16PPC: Fix TCG chunks that don't free their tempsAlexander Graf1-0/+7
We want to make sure that every instruction cleans up after itself and clears every temporary it allocated. While checking whether this is already the case, I came across a few cases where it isn't. This patch fixes every translation I found that doesn't free their allocated temporaries. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP Shift SignificandTom Musta1-0/+10
Add emulation of the PowerPC Decimal Floating Point Shift Significand Left Immediate (dscli[q][.]) and DFP Shift Significant Right Immediate (dscri[q][.]) instructions. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP Insert Biased ExponentTom Musta1-0/+4
Add emulation of the PowerPC Decimal Floating Point Insert Biased Exponent instructions diex[q][.]. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP Extract Biased ExponentTom Musta1-0/+4
Add emulation of the PowerPC Decimal Floating Point Extract Biased Exponent instructions dxex[q][.]. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP Encode BCD to DPDTom Musta1-0/+4
Add emulation of the PowerPC Decimal Floating Point Encode Binary Coded Decimal to Densely Packed Decimal instructions denbcd[q][.]. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP Decode DPD to BCDTom Musta1-0/+4
Add emulation of the Power PC Decimal Floating Point Decode Densely Packed Decimal to Binary Coded Decimal instructions ddedpd[q][.]. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP Convert to FixedTom Musta1-0/+4
Add emulation of the PowerPC Decimal Floating Point Convert to Fixed instructions dctfix[q][.]. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP Convert to FixedTom Musta1-0/+4
Add emulation of the PowerPC Decimal Floating Point Convert to Fixed instructions dctfix[q][.]. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce Round to DFP Short/LongTom Musta1-0/+4
Add emulation of the PowerPC Round to DFP Short (drsp[.]) and Round to DFP Long (drdpq[.]) instructions. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP Convert to Long/ExtendedTom Musta1-0/+4
Add emulation of the PowerPC Convert to DFP Long (dctdp[.]) and Convert to DFP Extended (dctqpq[.]) instructions. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP Round to IntegerTom Musta1-0/+8
Add emulation of the PowerPC Decimal Floating Point (DFP) Round to FP Integer With Inexact (drintx[q][.]) and DFP Round to FP Integer Without Inexact (drintn[q][.]) instructions. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP ReroundTom Musta1-0/+4
Add emulation of the PowerPC Decimal Floating Point Reround instructions drrnd[q][.]. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP QuantizeTom Musta1-0/+8
Add emulation of the PowerPC Decimal Floating Point Quantize instructions dquai[q][.] and dqua[q][.]. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP Test SignificanceTom Musta1-0/+4
Add emulation of the PowerPC Decimal Floating Point Test Significance instructions dtstsf[q][.]. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP Test ExponentTom Musta1-0/+4
Add emulation of the PowerPC Decimal Floating Point Test Exponent instructions dtstex[q][.]. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP Test Data GroupTom Musta1-0/+4
Add emulation of the PowerPC Decimal Floating Point Test Data Group instructions dtstdg[q][.]. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP Test Data ClassTom Musta1-0/+4
Add emulation of the PowerPC Decimal Floating Point Test Data Class instructions dtstdc[q][.]. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP ComparesTom Musta1-0/+8
Add emulation of the PowerPC Decimal Floating Point Compare instructions dcmpu[q] and dcmpo[q]. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP DivideTom Musta1-0/+4
Add emulation of the PowerPC Decimal Floating Point Divide instructions ddiv[q][.] Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP MultiplyTom Musta1-0/+4
Add emulation of the PowerPC Decimal Floating Point Multiply instructions dmul[q][.] Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP SubtractTom Musta1-1/+4
Add emulation of the PowerPC Decimal Floating Point Subtract instructions dsub[q][.] Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce DFP AddTom Musta1-2/+5
Add emulation of the PowerPC Decimal Floating Point Add instructions dadd[q][.] Various GCC unused annotations are removed since it is now safe to remove them. Signed-off-by: Tom Musta <tommusta@gmail.com> [agraf: move brace in function definition] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce Decoder Macros for DFPTom Musta1-0/+109
Add decoder macros for the various Decimal Floating Point instruction forms. Illegal instruction masks are used to not only guard against reserved instruction field use, but also to catch illegal quad word forms that use odd-numbered floating point registers. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Introduce Generator Macros for DFP Arithmetic FormsTom Musta1-0/+177
Add general support for generators of PowerPC Decimal Floating Point helpers. Some utilities are annotated with GCC attribute unused in order to preserve build bisection. These annotations will be removed in later patches. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-05softmmu: introduce cpu_ldst.hPaolo Bonzini1-0/+1
This will collect all load and store helpers soon. For now it is just a replacement for softmmu_exec.h, which this patch stops including directly, but we also include it where this will be necessary in order to simplify the next patch. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-28tcg: Invert the inclusion of helper.hRichard Henderson1-3/+2
Rather than include helper.h with N values of GEN_HELPER, include a secondary file that sets up the macros to include helper.h. This minimizes the files that must be rebuilt when changing the macros for file N. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-03-13cpu: Move breakpoints field from CPU_COMMON to CPUStateAndreas Färber1-2/+2
Most targets were using offsetof(CPUFooState, breakpoints) to determine how much of CPUFooState to clear on reset. Use the next field after CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise. Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-05target-ppc: Use Additional Temporary in stqcx CaseTom Musta1-3/+5
Per Alex Graf's suggestion, the recently added case to gen_conditional_store for stqcx should use an additional temporary when accessing the second doubleword. This avoids the mutation of the EA argument to the function, which is counter intuitive. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc/translate.c: Use ULL suffix for 64 bit constantsPeter Maydell1-2/+2
64 bit constants need the "ULL" suffix, not just "UL", because on 32 bit platforms 'long' is not large enough and this will cause a compiler warning. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Vector Permute and Exclusive ORTom Musta1-1/+6
This patch adds the Vector Permuate and Exclusive OR (vpermxor) instruction introduced in Power ISA Version 2.07. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Vector SHA Sigma InstructionsTom Musta1-0/+24
This patch adds the Vector SHA Sigma instructions introduced in Power ISA Version 2.07: - Vector SHA-512 Sigma Doubleword (vshasigmad) - Vector SHA-256 Sigma Word (vshasigmaw) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: AES InstructionsTom Musta1-0/+29
This patch adds the Vector AES instructions introduced in Power ISA Version 2.07: - Vector AES Cipher (vcipher) - Vector AES Cipher Last (vcipherlast) - Vector AES Inverse Cipher (vncipher) - Vector AES Inverse Cipher Last (vncipherlast) - Vector AES SubBytes (vsbox) Note that the implementation of vncipher deviates from the RTL in ISA V2.07. However it does match the verbal description in the third paragraph. The RTL will be fixed in ISA V2.07B. The implementation here has been tested against actual P8 hardware. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Binary Coded Decimal InstructionsTom Musta1-4/+41
This patch add the Binary Coded Decimal instructions bcdadd. and bcdsub. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Vector Polynomial Multiply SumTom Musta1-0/+8
This patch adds the Vectory Polynomial Multiply Sum instructions introduced in Power ISA Version 2.07: - Vectory Polynomial Multiply Sum Byte (vpmsumb) - Vectory Polynomial Multiply Sum Halfword (vpmsumh) - Vectory Polynomial Multiply Sum Word (vpmsumw) - Vectory Polynomial Multiply Sum Doubleword (vpmsumd) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Vector Gather Bits by BytesTom Musta1-0/+2
This patch adds the Vector Gather Bits by Bytes Doubleword (vgbbd) instruction which is introduced in Power ISA Version 2.07. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Doubleword ComparesTom Musta1-3/+13
This patch adds the Vector Compare Doubleword instructions introduced by Power ISA Version 2.07: - Vector Compare Equal to Unsigned Doubleword (vcmpequd) - Vector Compare Greater Than Signed Doubleword (vcmpgtsd) - Vector Compare Greater Than Unsigned Doubleword (vcmpgtud) These instructions are encoded with bit 31 set to 1 and so are duals with vcmpeqfp, vcmpgtfp and vcmpbfp respectively. The helper macro for integer compares is enhanced to account for 64-bit operands. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: vbpermq InstructionTom Musta1-0/+2
This patch adds the Vector Bit Permute Quadword (vbpermq) instruction introduced in Power ISA Version 2.07. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Quadword Addition and SubtracationTom Musta1-0/+18
This patch adds the Vector Quadword Addition and Subtraction instructions introduced in Power ISA Version 2.07: - Vector Add Unsigned Quadword Modulo (vadduqm) - Vector Add & Write Carry Unsigned Quadword (vaddcuq) - Vector Add Extended Unsigned Quadword (vaddeuqm) - Vector Add Extended & Write Carry Unsigned Quadword (vaddecuq) - Vector Subtract Unsigned Quadword Modulo (vsubuqm) - Vector Subtract & Write Carry Unsigned Quadword (vsubcuq) - Vector Subtract Extended Unsigned Quadword (vsubeuqm) - Vector Subtract Extended & Write Carry Unsigned Quadword (vsubecuq) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Altivec 2.07: Vector Doubleword Rotate and Shift InstructionsTom Musta1-0/+8
This patch adds the vector doublword rotate and shift instructions introduced in Power ISA Version 2.07: - Vector Rotate Left Doubleword instruction (vrld) - Vector Shift Left Doubleword (vsld) - Vector Shift Right Doubleword (vsrd) - Vector Shift Right Algegbraic Doubleword (vsrad) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.1 at 2024-10-15 16:24:43 +0000