aboutsummaryrefslogtreecommitdiff
path: root/target-ppc/cpu.h
AgeCommit message (Collapse)AuthorFilesLines
2012-06-24PPC: BookE206: Bump MAS2 to 64bitAlexander Graf1-1/+1
On 64bit capable systems, MAS2 can actually hold a 64bit virtual page address. So increase the mask for its EPN. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24PPC: BookE: Implement EPR SPRAlexander Graf1-0/+1
On the e500 series, accessing SPR_EPR magically turns into an access at that CPU's IACK register on the MPIC. Implement that logic to get kernels that make use of that feature work. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24PPC: Add support for MSR_CMAlexander Graf1-0/+9
The BookE variant of MSR_SF is MSR_CM. Implement everything it takes in TCG to support running 64bit code with MSR_CM set. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24PPC: Add some booke SPR definesAlexander Graf1-0/+22
The number of SPRs avaiable in different PowerPC chip is still increasing. Add definitions for the MAS7_MAS3 SPR and all currently known bits in EPCR. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24ppc64: Rudimentary Support for extra page sizes on server CPUsBenjamin Herrenschmidt1-0/+31
More recent Power server chips (i.e. based on the 64 bit hash MMU) support more than just the traditional 4k and 16M page sizes. This can get quite complicated, because which page sizes are supported, which combinations are supported within an MMU segment and how these page sizes are encoded both in the SLB entry and the hash PTE can vary depending on the CPU model (they are not specified by the architecture). In addition the firmware or hypervisor may not permit use of certain page sizes, for various reasons. Whether various page sizes are supported on KVM, for example, depends on whether the PR or HV variant of KVM is in use, and on the page size of the memory backing the guest's RAM. This patch adds information to the CPUState and cpu defs to describe the supported page sizes and encodings. Since TCG does not yet support any extended page sizes, we just set this to NULL in the static CPU definitions, expanding this to the default 4k and 16M page sizes when we initialize the cpu state. When using KVM, however, we instead determine available page sizes using the new KVM_PPC_GET_SMMU_INFO call. For old kernels without that call, we use some defaults, with some guesswork which should do the right thing for existing HV and PR implementations. The fallback might not be correct for future versions, but that's ok, because they'll have KVM_PPC_GET_SMMU_INFO. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24ppc: Cleanup MMU mergeBlue Swirl1-21/+0
Remove useless wrappers. In some cases 'int' parameters are changed to uint32_t. Make internal functions static. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> [agraf: fix kvm compilation] Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24ppc: Move exception helpers from helper.c to excp_helper.cBlue Swirl1-2/+0
Move exception helpers from helper.c to excp_helper.c and make cpu_dump_rfi() static. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-04target-ppc: Let cpu_ppc_init() return PowerPCCPUAndreas Färber1-2/+10
Adapt e500 mpc8544ds machine accordingly. Turn cpu_init() into a static inline function returning CPUPPCState for backwards compatibility. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Alexander Graf <agraf@suse.de>
2012-04-15target-ppc: QOM'ify CPUAndreas Färber1-0/+2
Embed CPUPPCState as first member of PowerPCCPU. Distinguish between "powerpc-cpu", "powerpc64-cpu" and "embedded-powerpc-cpu". Let CPUClass::reset() call cpu_state_reset() for now. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: David Gibson <david@gibson.dropbear.id.au>
2012-04-15target-ppc: Drop cpu_ppc_close()Andreas Färber1-1/+0
It is unused, so avoid QOM'ifying it unneededly. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: David Gibson <david@gibson.dropbear.id.au>
2012-04-07Replace Qemu by QEMU in commentsStefan Weil1-3/+3
The official spelling is QEMU. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Andreas Färber <afaerber@suse.de> [blauwirbel@gmail.com: fixed comment style in hw/sun4m.c] Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-15PPC64: Add support for ldbrx and stdbrx instructionsThomas Huth1-1/+3
These instructions for loading and storing byte-swapped 64-bit values have been introduced in PowerISA 2.06. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-14Rename CPUState -> CPUArchStateAndreas Färber1-1/+1
Scripted conversion: for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do sed -i "s/CPUState/CPUArchState/g" $file done All occurrences of CPUArchState are expected to be replaced by QOM CPUState, once all targets are QOM'ified and common fields have been extracted. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-ppc: Don't overuse CPUStateAndreas Färber1-19/+19
Scripted conversion: sed -i "s/CPUState/CPUPPCState/g" target-ppc/*.[hc] sed -i "s/#define CPUPPCState/#define CPUState/" target-ppc/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14PPC: 405: Use proper CPU resetAlexander Graf1-0/+3
On ppc405ep there is a register that allows for software to reset the core, but not the whole system. Implement this reset using a reset interrupt. This gets rid of a bunch of #if 0'ed code. Reported-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-02-02PPC: Add CPU feature for processor controlAlexander Graf1-1/+3
We're soon going to implement processor control features. Add the feature flag, so we're well prepared. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-02-02PPC: E500: Add doorbell definesAlexander Graf1-0/+16
We're going to introduce doorbell instructions (called processor control in the spec) soon. Add some defines for easier patch readability later. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-02-02PPC: E500: Add some more excp vectorsAlexander Graf1-1/+4
Our EXCP list is getting outdated. By now, 3 new exception vectors have been introduced. Update the list so we have everything at one place. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-02-02PPC: booke206: Check for TLB overrunAlexander Graf1-0/+4
Our internal helpers to fetch TLB entries were not able to tell us that an entry doesn't even exist. Pass an error out if we hit such a case to not accidently pass beyond the TLB array. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-02-02PPC: booke: add tlbnps handlingAlexander Graf1-0/+25
When using MAV 2.0 TLB registers, we have another range of TLB registers available to read the supported page sizes from. Add SPR definitions for those and add a helper function that we can use to receive such a bitmap even when using MAV 1.0. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-02-02PPC: Add IVOR 38-42Alexander Graf1-0/+5
Our code only knows IVORs up to 37. Add the new ones defined in ISA 2.06 from 38 - 42. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Andreas Färber <afaerber@suse.de>
2011-12-02fix spelling in target sub directoryDong Xu Wang1-2/+2
Cc: Richard Henderson <rth@twiddle.net> Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alexander Graf <agraf@suse.de> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-31ppc: Alter CPU state to mask out TCG unimplemented instructions as appropriateDavid Gibson1-0/+26
The CPU state contains two bitmaps, initialized from the CPU spec which describes which instructions are implemented on the CPU. A couple of bits are defined which cover instructions (VSX and DFP) which are not currently implemented in TCG. So far, these are only used to handle the case of -cpu host because a KVM guest can use the instructions when the host CPU supports them. However, it's a mild layering violation to simply not include those bits in the CPU descriptions for those CPUs that do support them, just because we can't handle them in TCG. This patch corrects the situation, so that the instruction bits _are_ shown correctly in the cpu spec table, but are masked out from the cpu state in the non-KVM case. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-30pseries: Correct vmx/dfp handling in both KVM and TCG casesDavid Gibson1-0/+20
Currently, when KVM is enabled, the pseries machine checks if the host CPU supports VMX, VSX and/or DFP instructions and advertises accordingly in the guest device tree. It does this regardless of what CPU is selected on the command line. On the other hand, when in TCG mode, it never advertises any of these facilities, even basic VMX (Altivec) which is supported in TCG. Now that we have a -cpu host option for ppc, it is fairly straightforward to fix both problems. This patch changes the -cpu host code to override the basic cpu spec derived from the PVR with information queried from the host avout VMX, VSX and DFP capability. The pseries code then uses the instruction availability advertised in the cpu state to set the guest device tree correctly for both the KVM and TCG cases. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-30PPC: Bump qemu-system-ppc to 64-bit physical address spaceAlexander Graf1-1/+1
Some 32-bit PPC CPUs can use up to 36 bit of physical address space. Treat them accordingly in the qemu-system-ppc binary type. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-30ppc: First cut implementation of -cpu hostDavid Gibson1-0/+1
For convenience with kvm, x86 allows the user to specify -cpu host on the qemu command line, which means make the guest cpu the same as the host cpu. This patch implements the same option for ppc targets. For now, this just read the host PVR (Processor Version Register) and selects one of our existing CPU specs based on it. This means that the option will not work if the host cpu is not supported by TCG, even if that wouldn't matter for use under kvm. In future, we can extend this in future to override parts of the cpu spec based on information obtained from the host (via /proc/cpuinfo, the host device tree, or explicit KVM calls). That will let us handle cases where the real kvm-virtualized CPU doesn't behave exactly like the TCG-emulated CPU. With appropriate annotation of the CPU specs we'll also then be able to use host cpus under kvm even when there isn't a matching full TCG model. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-06PPC: booke timersFabien Chouteau1-0/+27
While working on the emulation of the freescale p2010 (e500v2) I realized that there's no implementation of booke's timers features. Currently mpc8544 uses ppc_emb (ppc_emb_timers_init) which is close but not exactly like booke (for example booke uses different SPR). Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-06Implement POWER7's CFAR in TCGDavid Gibson1-0/+8
This patch implements support for the CFAR SPR on POWER7 (Come From Address Register), which snapshots the PC value at the time of a branch or an rfid. The latest powerpc-next kernel also catches it and can show it in xmon or in the signal frames. This works well enough to let recent kernels boot (which otherwise oops on the CFAR access). It hasn't been tested enough to be confident that the CFAR values are actually accurate, but one thing at a time. Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-06ppc: booke206: use MAV=2.0 TSIZE definition, fix 4G pagesScott Wood1-2/+2
This definition is backward compatible with MAV=1.0 as long as the guest does not set reserved bits in MAS1/MAS4. Also, fix the shift in booke206_tlb_to_page_size -- it's the base that should be able to hold a 4G page size, not the shift count. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-06ppc: booke206: add "info tlb" supportScott Wood1-0/+2
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-06kvm: ppc: booke206: use MMU APIScott Wood1-0/+2
Share the TLB array with KVM. This allows us to set the initial TLB both on initial boot and reset, is useful for debugging, and could eventually be used to support migration. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-08-23PPC: E500: Add ESR bit definitionsAlexander Graf1-1/+16
The BookE spec specifies a number of ESR bits. Add defines for them so we can use them later on. Reported-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-08-07Remove unused is_softmmu parameter from cpu_handle_mmu_faultBlue Swirl1-1/+1
Parameter is_softmmu (and its evil mutant twin brother is_softmuu) is not used in cpu_*_handle_mmu_fault() functions, remove them and adjust callers. Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12target-alpha, target-ppc: Remove unnecessary setjmp.h includePeter Maydell1-2/+0
Remove the include of setjmp.h from the cpu.h of target-alpha and target-ppc. This is unnecessary because cpu-defs.h already includes this header; this change brings these two targets into line with all the rest. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-01Merge branch 'ppc-next' of git://repo.or.cz/qemu/agrafBlue Swirl1-14/+33
* 'ppc-next' of git://repo.or.cz/qemu/agraf: PPC: move TLBs to their own arrays PPC: 440: Use 440 style MMU as default, so Qemu knows the MMU type PPC: E500: Use MAS registers instead of internal TLB representation PPC: Only set lower 32bits with mtmsr PPC: update openbios firmware PPC: mpc8544ds: Add hypervisor node PPC: calculate kernel,initrd,cmdline locations dynamically target-ppc: Handle memory-forced I/O controller access PPC: E500: Implement reboot controller
2011-06-26Move cpu_has_work and cpu_pc_from_tb to cpu.hBlue Swirl1-0/+12
Move functions cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h. This is needed by later patches. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-17PPC: move TLBs to their own arraysAlexander Graf1-7/+14
Until now, we've created a union over multiple different TLB types and allocated that union. While it's a waste of memory (and cache) to allocate TLB information for a TLB type with much information when you only need little, it also inflicts another issue. With the new KVM API, we can now share the TLB between KVM and qemu, but for that to work we need to have both be in the same layout. We can't just stretch it over to fit some internal different TLB representation. Hence this patch moves all TLB types to their own array, allowing us to only address and allocate exactly the boundaries required for the specific TLB type at hand. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-17PPC: E500: Use MAS registers instead of internal TLB representationAlexander Graf1-10/+22
The natural format for e500 cores to do TLB manipulation with are the MAS registers. Instead of converting them into some internal representation and back again when the guest reads them, we can just keep the data identical to the way the guest passed it to us. The main advantage of this approach is that we're getting closer to being able to share MMU data with KVM using shared memory, so that we don't need to copy lots of MMU data back and forth all the time. For this to work however, another patch is required that gets rid of the TLB union, as that destroys our memory layout that needs to be identical with the kernel one. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-20w32: Fix compilation and replace non-portable usage of ulongStefan Weil1-2/+2
ulong is undefined for w32 (and maybe other) compilations. Replace it by uintptr_t (which also fixes compilation for w64 and is a better choice for pointer to integer conversions). Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-14Merge branch 'ppc-next' of git://repo.or.cz/qemu/agrafAurelien Jarno1-3/+305
* 'ppc-next' of git://repo.or.cz/qemu/agraf: PPC: Qdev'ify e500 pci PPC MPC7544DS: Use new TLB helper function PPC: Implement e500 (FSL) MMU PPC: Add another 64 bits to instruction feature mask PPC: Add GS MSR definition PPC: Make MPC8544DS emulation work w/o KVM PPC: Make MPC8544DS obey -cpu switch Fix off-by-one error in sizing pSeries hcall table ppc64: Fix out-of-tree builds kvm: ppc: warn user on PAGE_SIZE mismatch kvm: ppc: detect old headers monitor: add PPC BookE SPRs kvm: ppc: fixes for KVM_SET_SREGS on init ppc64: Don't try to build sPAPR RTAS on Darwin Place pseries vty devices at addresses more similar to existing machines Make pSeries 'model' property more closely resemble real hardware pseries: Increase maximum CPUs to 256
2011-05-12PPC: Implement e500 (FSL) MMUAlexander Graf1-3/+301
Most of the code to support e500 style MMUs is already in place, but we're missing on some of the special TLB0-TLB1 handling code and slightly different TLB modification. This patch adds support for the FSL style MMU. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-12PPC: Add another 64 bits to instruction feature maskAlexander Graf1-0/+1
To enable quick runtime detection of instruction groups to the currently selected CPU emulation, we have a feature mask of what exactly the respective instruction supports. This feature mask is 64 bits long and we just successfully exceeded those 64 bits. To add more features, we need to think of something. The easiest solution that came to my mind was to simply add another 64 bits that we can also match on. Since the comparison is only done on start of the qemu process to generate an internal opcode calling table, we should be fine on any performance penalties here. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-12PPC: Add GS MSR definitionAlexander Graf1-0/+2
The BookE specification defines MSR bit 28 as Guest State. Add it to the list of MSR macros. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-09monitor: add PPC BookE SPRsScott Wood1-0/+1
Read them via KVM_GET_SREGS in kvm_arch_get_registers(), and display them in "info registers". Also get CR and PID from the existing KVM_GET_REGS. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08Fix typo in comment (embeded -> embedded)Stefan Weil1-1/+1
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-04-01Implement PAPR VPA functions for pSeries shared processor partitionsDavid Gibson1-0/+7
Shared-processor partitions are those where a CPU is time-sliced between partitions, rather than being permanently dedicated to a single partition. qemu emulated partitions, since they are just scheduled with the qemu user process, behave mostly like shared processor partitions. In order to better support shared processor partitions (splpar), PAPR defines the "VPA" (Virtual Processor Area), a shared memory communication channel between the hypervisor and partitions. There are also two additional shared memory communication areas for specialized purposes associated with the VPA. A VPA is not essential for operating an splpar, though it can be necessary for obtaining accurate performance measurements in the presence of runtime partition switching. Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE, hypercall, which allows a partition OS to give up it's shared processor timeslices to other partitions when idle. This patch implements the VPA and H_CEDE hypercalls in qemu. We don't implement any of the more advanced statistics which can be communicated through the VPA. However, this is enough to make normal pSeries kernels do an effective power-save idle on an emulated pSeries, significantly reducing the host load of a qemu emulated pSeries running an idle guest OS. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Virtual hash page table handling on pSeries machineDavid Gibson1-0/+2
On pSeries logical partitions, excepting the old POWER4-style full system partitions, the guest does not have direct access to the hardware page table. Instead, the pagetable exists in hypervisor memory, and the guest must manipulate it with hypercalls. However, our current pSeries emulation more closely resembles the old style where the guest must set up and handle the pagetables itself. This patch converts it to act like a modern partition. This involves two things: first, the hash translation path is modified to permit the has table to be stored externally to the emulated machine's RAM. The pSeries machine init code configures the CPUs to use this mode. Secondly, we emulate the PAPR hypercalls for manipulating the external hashed page table. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Add POWER7 support for ppcDavid Gibson1-0/+16
This adds emulation support for the recent POWER7 cpu to qemu. It's far from perfect - it's missing a number of POWER7 features so far, including any support for VSX or decimal floating point instructions. However, it's close enough to boot a kernel with the POWER7 PVR. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Support 1T segments on ppcDavid Gibson1-0/+7
Traditionally, the "segments" used for the two-stage translation used on powerpc MMUs were 256MB in size. This was the only option on all hash page table based 32-bit powerpc cpus, and on the earlier 64-bit hash page table based cpus. However, newer 64-bit cpus also permit 1TB segments This patch adds support for 1TB segment translation to the qemu code. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Better factor the ppc hash translation pathDavid Gibson1-0/+1
Currently the path handling hash page table translation in get_segment() has a mix of common and 32 or 64 bit specific code. However the division is not done terribly well which results in a lot of messy code flipping between common and divided paths. This patch improves the organization, consolidating several divided paths into one. This in turn allows simplification of some code in get_segment(), removing a number of ugly interim variables. This new factorization will also make it easier to add support for the 1T segments added in newer CPUs. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.1 at 2024-12-28 15:29:56 +0000