aboutsummaryrefslogtreecommitdiff
path: root/target-ppc/cpu.h
AgeCommit message (Collapse)AuthorFilesLines
2016-12-20Move target-* CPU file into a target/ folderThomas Huth1-2454/+0
We've currently got 18 architectures in QEMU, and thus 18 target-xxx folders in the root folder of the QEMU source tree. More architectures (e.g. RISC-V, AVR) are likely to be included soon, too, so the main folder of the QEMU sources slowly gets quite overcrowded with the target-xxx folders. To disburden the main folder a little bit, let's move the target-xxx folders into a dedicated target/ folder, so that target-xxx/ simply becomes target/xxx/ instead. Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part] Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part] Acked-by: Michael Walle <michael@walle.cc> [lm32 part] Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part] Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part] Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part] Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part] Acked-by: Richard Henderson <rth@twiddle.net> [alpha part] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part] Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part] Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part] Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part] Signed-off-by: Thomas Huth <thuth@redhat.com>
2016-11-23target-ppc: Allow eventual removal of old migration mistakesDavid Gibson1-1/+2
Until very recently, the vmstate for ppc cpus included some poorly thought out VMSTATE_EQUAL() components, that can easily break migration compatibility, and did so between qemu-2.6 and later versions. A hack was recently added which fixes this migration breakage, but it leaves the unhelpful cruft of these fields in the migration stream. This patch adds a new cpu property allowing these fields to be removed from the stream entirely. For the pseries-2.8 machine type - which comes after the fix - and for all non-pseries machine types - which aren't mature enough to care about cross-version migration - we remove the fields from the stream. For pseries-2.7 and earlier, The migration hack remains in place, allowing backwards and forwards migration with the older machine types. This restricts the migration compatibility cruft to older machine types, and at least opens the possibility of eventually deprecating and removing it entirely. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-11-23target-ppc: Fix CPU migration from qemu-2.6 <-> later versionsDavid Gibson1-0/+6
When migration for target-ppc was converted to vmstate, several VMSTATE_EQUAL() checks were foolishly included of things that really should be internal state. Specifically we verified equality of the insns_flags and insns_flags2 fields, which are used within TCG to determine which groups of instructions are available on this cpu model. Between qemu-2.6 and qemu-2.7 we made some changes to these classes which broke migration. This path fixes migration both forwards and backwards. On migration from 2.6 to later versions we import the fields into teporary variables, which we then ignore. In migration backwards, we populate the temporary fields from the runtime fields, but mask out the bits which were added after qemu-2.6, allowing the VMSTATE_EQUAL in qemu-2.6 to accept the stream. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org>
2016-09-23target-ppc: tlbie/tlbivax should have global effectNikunj A Dadhania1-0/+1
tlbie (BookS) and tlbivax (BookE) plus the H_CALLs(pseries) should have a global effect. Introduces TLB_NEED_GLOBAL_FLUSH flag. During lazy tlb flush, after taking care of pending local flushes, check broadcast flush(at context synchronizing event ptesync/tlbsync, etc) is needed. Depending on the bitmask state of the tlb_need_flush, tlb is flushed from other cpus if needed and the flags are cleared. Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [dwg: Use 'true' instead of '1' for call to check_tlb_flush()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-23target-ppc: add TLB_NEED_LOCAL_FLUSH flagNikunj A Dadhania1-0/+1
Introduces bit-flag in CPUPPCState::tlb_need_flush: TLB_NEED_LOCAL_FLUSH (0x1) - Flush local tlb This would indicate a pending local tlb flush (isync instructions, interrupts, ...) Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-15Remove unused function declarationsLadi Prosek1-2/+0
Unused function declarations were found using a simple gcc plugin and manually verified by grepping the sources. Signed-off-by: Ladi Prosek <lprosek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-09-07ppc: Don't update NIP in facility unavailable interruptsBenjamin Herrenschmidt1-1/+0
This is no longer necessary as the helpers will properly retrieve the return address when needed. Also remove gen_update_current_nip() which didn't seem to make much sense to me. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-07ppc: Provide basic raise_exception_* functionsBenjamin Herrenschmidt1-0/+8
Instead of using the same helpers called from translate.c, let's have a bunch of functions that take the various argument combinations, especially the retaddr which will be needed in subsequent patches, and leave the helpers to be just that, helpers for translate.c We don't yet convert all users, we'll go through them in subsequent patches. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> -- v2. Fix raise_exception_ra() to properly pass raddr Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-07target-ppc: Introduce POWER ISA 3.0 flagNikunj A Dadhania1-1/+4
This flag will be used for POWER9 instructions. Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-08-10ppc: Introduce a function to look up CPU alias stringsThomas Huth1-0/+1
We will need this function to look up the aliases in the spapr-cpu-core code, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-07-12target-*: Clean up cpu.h header guardsMarkus Armbruster1-3/+4
Most of them use guard symbols like CPU_$target_H, but we also have __MIPS_CPU_H__ and __TRICORE_CPU_H__. They all upset scripts/clean-header-guards.pl. The script dislikes CPU_$target_H because they don't match their file name (they should, to make guard collisions less likely). The others are reserved identifiers. Clean them all up: use guard symbol $target_CPU_H for target-$target/cpu.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-05ppc/hash64: Add proper real mode translation supportBenjamin Herrenschmidt1-0/+2
This adds proper support for translating real mode addresses based on the combination of HV and LPCR bits. This handles HRMOR offset for hypervisor real mode, and both RMA and VRMA modes for guest real mode. PAPR mode adjusts the offsets appropriately to match the RMA used in TCG, but we need to limit to the max supported by the implementation (16G). This includes some fixes by Cédric Le Goater <clg@kaod.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [dwg: Adjusted for differences in my version of the prereq patches] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-07-01ppc: Update LPCR definitionsBenjamin Herrenschmidt1-3/+13
Includes all the bits up to ISA 2.07 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: fixed checkpatch.pl errors ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-29target-*: Don't redefine cpu_exec()Peter Crosthwaite1-2/+0
This function needs to be converted to QOM hook and virtualised for multi-arch. This rename interferes, as cpu-qom will not have access to the renaming causing name divergence. This rename doesn't really do anything anyway so just delete it. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-Id: <69bd25a8678b8b31b91cd9760c777bed1aafb44e.1437212383.git.crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaitepeter@gmail.com>
2016-06-23ppc: Add P7/P8 Power Management instructionsBenjamin Herrenschmidt1-1/+16
This adds the ISA 2.06 and later power management instructions (doze, nap, sleep and rvwinkle) and associated wakeup cause testing in LPCR Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: fixed checkpatch.pl errors ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-23ppc: Add real mode CI load/store instructions for P7 and P8Benjamin Herrenschmidt1-1/+3
Those instructions are only available in hypervisor real mode and allow cache inhibited garded access to devices in that mode. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: fixed checkpatch.pl errors ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-23ppc: Fix POWER7 and POWER8 exception definitionsBenjamin Herrenschmidt1-1/+10
We were initializing unused ones and missing some Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [clg: fixed checkpatch.pl errors ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-14ppc: Improve PCR bit selection in ppc_set_compat()Thomas Huth1-0/+2
When using an olderr PowerISA level, all the upper compatibility bits have to be enabled, too. For example when we want to run something in PowerISA 2.05 compatibility mode on POWER8, the bit for 2.06 has to be set beside the bit for 2.05. Additionally, to make sure that we do not set bits that are not supported by the host, we apply a mask with the known-to-be-good bits here, too. Signed-off-by: Thomas Huth <thuth@redhat.com> [dwg: Added some #ifs to fix compile on 32-bit targets] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-14ppc: Split pcr_mask settings into supported bits and the register maskThomas Huth1-0/+1
The current pcr_mask values are ambiguous: Should these be the mask that defines valid bits in the PCR register? Or should these rather indicate which compatibility levels are possible? Anyway, POWER6 and POWER7 should certainly not use the same values here. So let's introduce an additional variable "pcr_supported" here which is used to indicate the valid compatibility levels, and use pcr_mask to signal the valid bits in the PCR register. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-07Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-2/+0
pc, pci, virtio: new features, cleanups, fixes This includes some infrastructure for ipmi smbios tables. Beginning of acpi hotplug rework by Igor for supporting >255 CPUs. Misc cleanups and fixes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 07 Jun 2016 13:55:22 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (25 commits) virtio: move bi-endian target support to a single location pc-dimm: introduce realize callback pc-dimm: get memory region from ->get_memory_region() acpi: make bios_linker_loader_add_checksum() API offset based acpi: make bios_linker_loader_add_pointer() API offset based tpm: apci: cleanup TCPA table initialization acpi: cleanup bios_linker_loader_cleanup() acpi: simplify bios_linker API by removing redundant 'table' argument acpi: convert linker from GArray to BIOSLinker structure pc: use AcpiDeviceIfClass.send_event to issue GPE events acpi: extend ACPI interface to provide send_event hook pc: Postpone SMBIOS table installation to post machine init ipmi: rework the fwinfo to be fetched from the interface tests: acpi: update tables with consolidated legacy cpu-hotplug AML pc: acpi: cpuhp-legacy: switch ProcessorID to possible_cpus idx pc: acpi: simplify build_legacy_cpu_hotplug_aml() signature pc: acpi: consolidate legacy CPU hotplug in one file pc: acpi: mark current CPU hotplug functions as legacy pc: acpi: cpu-hotplug: make AML CPU_foo defines local to cpu_hotplug_acpi_table.c pc: acpi: consolidate \GPE._E02 with the rest of CPU hotplug AML ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-07virtio: move bi-endian target support to a single locationGreg Kurz1-2/+0
Paolo's recent cpu.h cleanups broke legacy virtio for ppc64 LE guests (and arm BE guests as well, even if I have not verified that). Especially, commit "33c11879fd42 qemu-common: push cpu.h inclusion out of qemu-common.h" has the side-effect of silently hiding the TARGET_IS_BIENDIAN macro from the virtio memory accessors, and thus fully disabling support of endian changing targets. To be sure this cannot happen again, let's gather all the bi-endian bits where they belong in include/hw/virtio/virtio-access.h. The changes in hw/virtio/vhost.c are safe because vhost_needs_vring_endian() is not called on a hot path and non bi-endian targets will return false anyway. While here, also rename TARGET_IS_BIENDIAN to be more precise: it is only for legacy virtio and bi-endian guests. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-07ppc: Batch TLB flushes on 32-bit 6xx/7xx/7xxx in hash modeBenjamin Herrenschmidt1-1/+1
This ports the existing 64-bit mechanism to 32-bit, thus series of 64 tlbie's followed by a sync like some versions of Darwin (ab)use will result in a single flush. We apply a pending flush on any sync instruction though, as Darwin doesn't use tlbsync on non-SMP systems. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-07ppc: Better figure out if processor has HV modeBenjamin Herrenschmidt1-0/+4
We use an env. flag which is set to the initial value of MSR_HVB in the msr_mask. We also adjust the POWER8 mask to set SHV. Also use this to adjust ctx.hv so that it is *set* when the processor doesn't have an HV mode (970 with Apple mode for example), thus enabling hypervisor instructions/SPRs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [clg: ctx.hv used to be defined only for the hypervisor kernel (HV=1|PR=0). It is now defined also when PR=1 and conditions are fixed accordingly. stripped unwanted tabs.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-05-30ppc: Do some batching of TCG tlb flushesBenjamin Herrenschmidt1-0/+2
On ppc64 especially, we flush the tlb on any slbie or tlbie instruction. However, those instructions often come in bursts of 3 or more (context switch will favor a series of slbie's for example to an slbia if the SLB has less than a certain number of entries in it, and tlbie's can happen in a series, with PAPR, H_BULK_REMOVE can remove up to 4 entries at a time. Doing a tlb_flush() each time is a waste of time. We end up doing a memset of the whole TLB, reloading it for the next instruction, memset'ing again, etc... Those instructions don't have to take effect immediately. For slbie, they can wait for the next context synchronizing event. For tlbie, the next tlbsync. This implements batching by keeping a flag that indicates that we have a TLB in need of flushing. We check it on interrupts, rfi's, isync's and tlbsync and flush the TLB if needed. This reduces the number of tlb_flush() on a boot to a ubuntu installer first dialog screen from roughly 360K down to 36K. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: added a 'CPUPPCState *' variable in h_remove() and h_bulk_remove() ] Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: removed spurious whitespace change, use 0/1 not true/false consistently, since tlb_need_flush has int type] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-05-30ppc: Use split I/D mmu modes to avoid flushes on interruptsBenjamin Herrenschmidt1-3/+8
We rework the way the MMU indices are calculated, providing separate indices for I and D side based on MSR:IR and MSR:DR respectively, and thus no longer need to flush the TLB on context changes. This also adds correct support for HV as a separate address space. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-05-30ppc: Remove MMU_MODEn_SUFFIX definitionsBenjamin Herrenschmidt1-3/+0
We don't use the resulting accessors and this gets in the way of the split I/D TLB work. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-05-19cpu: move exec-all.h inclusion out of cpu.hPaolo Bonzini1-2/+0
exec-all.h contains TCG-specific definitions. It is not needed outside TCG-specific files such as translate.c, exec.c or *helper.c. One generic function had snuck into include/exec/exec-all.h; move it to include/qom/cpu.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19target-ppc: make cpu-qom.h not target specificPaolo Bonzini1-113/+52
Make PowerPCCPU an opaque type within cpu-qom.h, and move all definitions of private methods, as well as all type definitions that require knowledge of the layout to cpu.h. Conversely, move all definitions needed to define a class to cpu-qom.h. This helps making files independent of NEED_CPU_H if they only need to pass around CPU pointers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-12tb: consistently use uint32_t for tb->flagsEmilio G. Cota1-1/+1
We are inconsistent with the type of tb->flags: usage varies loosely between int and uint64_t. Settle to uint32_t everywhere, which is superior to both: at least one target (aarch64) uses the most significant bit in the u32, and uint64_t is wasteful. Compile-tested for all targets. Suggested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Suggested-by: Richard Henderson <rth@twiddle.net> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1460049562-23517-1-git-send-email-cota@braap.org>
2016-04-18ppc: Fix the range check in the LSWI instructionThomas Huth1-0/+10
There are two issues: First, the number of registers that are used has to be calculated with "(nb + 3) / 4" (i.e. round always up, not down). Second, the "start <= ra && (start + nr - 32) > ra" condition for the wrap-around case is wrong: It has to be tested with "||" instead of "&&". Since we can reuse this check later for the LSWX instruction, let's place the fixed code into a helper function, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-04-05ppc: Rework POWER7 & POWER8 exception modelCédric Le Goater1-0/+10
From: Benjamin Herrenschmidt <benh@kernel.crashing.org> This patch fixes the current AIL implementation for POWER8. The interrupt vector address can be calculated directly from LPCR when the exception is handled. The excp_prefix update becomes useless and we can cleanup the H_SET_MODE hcall. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: Removed LPES0/1 handling for HV vs. !HV Fixed LPCR_ILE case for POWERPC_EXCP_POWER8 ] Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> [dwg: This was written as a cleanup, but it also fixes a real bug where setting an alternative interrupt location would not be correctly migrated] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-03-24ppc: A couple more dummy POWER8 Book4 regsBenjamin Herrenschmidt1-0/+3
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: squashed in patch 'ppc: Add dummy ACOP SPR' ] Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-03-24ppc: Add dummy CIABR SPRBenjamin Herrenschmidt1-0/+1
We should implement HW breakpoint/watchpoint, qemu supports them... Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-03-24ppc: Add POWER8 IAMR registerBenjamin Herrenschmidt1-0/+1
With appropriate AMR-like masks. Not actually used by the translation logic at that point Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: changed spr_register_hv(SPR_IAMR) to spr_register_kvm_hv(SPR_IAMR) changed gen_spr_amr() prototype ] Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-03-24ppc: Add dummy SPR_IC for POWER8Benjamin Herrenschmidt1-0/+1
It's supposed to be an instruction counter. For now make us not crash when accessing it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-03-24ppc: Create cpu_ppc_set_papr() helperBenjamin Herrenschmidt1-0/+1
And move the code adjusting the MSR mask and calling kvmppc_set_papr() to it. This allows us to add a few more things such as disabling setting of MSR:HV and appropriate LPCR bits which will be used when fixing the exception model. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [clg: removed LPCR setting ] Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-03-24ppc: Update SPR definitionsBenjamin Herrenschmidt1-7/+47
Add definitions for additional SPR numbers and SPR bit definitions that will be relevant for subsequent improvements to POWER8 emulation Also fix the definition of LPIDR which was incorrect (and is different for server and embedded). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-03-16ppc: Add a few more P8 PMU SPRsBenjamin Herrenschmidt1-0/+7
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-03-16ppc: Define the PSPB register on POWER8Thomas Huth1-0/+1
POWER8 / PowerISA 2.07 has a new special purpose register called PSPB ("Problem State Priority Boost Register"). The contents of this register are currently lost during migration. To be able to migrate this register, too, we've got to define this SPR along with the other SPRs of POWER8. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-23all: Clean up includesPeter Maydell1-1/+0
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-01target-ppc: mcrfs should always update FEX/VX and only clear exception bitsJames Clarke1-0/+6
Here is the description of the mcrfs instruction from the PowerPC Architecture Book, Version 2.02, Book I: PowerPC User Instruction Set Architecture (http://www.ibm.com/developerworks/systems/library/es-archguide-v2.html), found on page 120: The contents of FPSCR field BFA are copied to Condition Register field BF. All exception bits copied are set to 0 in the FPSCR. If the FX bit is copied, it is set to 0 in the FPSCR. Special Registers Altered: CR field BF FX OX (if BFA=0) UX ZX XX VXSNAN (if BFA=1) VXISI VXIDI VXZDZ VXIMZ (if BFA=2) VXVC (if BFA=3) VXSOFT VXSQRT VXCVI (if BFA=5) However, currently every bit in FPSCR field BFA is set to 0, including ones not on that list. This can be seen in the following simple C program: #include <fenv.h> #include <stdio.h> int main(int argc, char **argv) { int ret; ret = fegetround(); printf("Current rounding: %d\n", ret); ret = fesetround(FE_UPWARD); printf("Setting to FE_UPWARD (%d): %d\n", FE_UPWARD, ret); ret = fegetround(); printf("Current rounding: %d\n", ret); ret = fegetround(); printf("Current rounding: %d\n", ret); return 0; } which gave the output (before this commit): Current rounding: 0 Setting to FE_UPWARD (2): 0 Current rounding: 2 Current rounding: 0 instead of (after this commit): Current rounding: 0 Setting to FE_UPWARD (2): 0 Current rounding: 2 Current rounding: 2 The relevant disassembly is in fegetround(), which, on my system, is: __GI___fegetround: <+0>: mcrfs cr7, cr7 <+4>: mfcr r3 <+8>: clrldi r3, r3, 62 <+12>: blr What happens is that, the first time fegetround() is called, FPSCR field 7 is retrieved. However, because of the bug in mcrfs, the entirety of field 7 is set to 0, which includes the rounding mode. There are other issues this will fix, such as condition flags not persisting when they should if read, and if you were to read a specific field with some exception bits set, but no others were set in the entire register, then the bits would be cleared correctly, but FEX/VX would not be updated to 0 as they should be. Signed-off-by: James Clarke <jrtc27@jrtc27.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-30target-ppc: Make every FPSCR_ macro have a corresponding FP_ macroJames Clarke1-9/+22
Signed-off-by: James Clarke <jrtc27@jrtc27.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-30target-ppc: Rework SLB page size lookupDavid Gibson1-0/+1
Currently, the ppc_hash64_page_shift() function looks up a page size based on information in an SLB entry. It open codes the bit translation for existing CPUs, however different CPU models can have different SLB encodings. We already store those in the 'sps' table in CPUPPCState, but we don't currently enforce that that actually matches the logic in ppc_hash64_page_shift. This patch reworks lookup of page size from SLB in several ways: * ppc_store_slb() will now fail (triggering an illegal instruction exception) if given a bad SLB page size encoding * On success ppc_store_slb() stores a pointer to the relevant entry in the page size table in the SLB entry. This is looked up directly from the published table of page size encodings, so can't get out ot sync. * ppc_hash64_htab_lookup() and others now use this precached page size information rather than decoding the SLB values * Now that callers have easy access to the page_shift, ppc_hash64_pte_raddr() amounts to just a deposit64(), so remove it and have the callers use deposit64() directly. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Alexander Graf <agraf@suse.de>
2016-01-30target-ppc: rename and export maybe_bswap_register()Greg Kurz1-0/+1
This helper will be used to support FP, Altivec and VSX registers when the guest is little-endian. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-30ppc: Clean up error handling in ppc_set_compat()David Gibson1-1/+1
Current ppc_set_compat() returns -1 for errors, and also (unconditionally) reports an error message. The caller in h_client_architecture_support() may then report it again using an outdated fprintf(). Clean this up by using the modern error reporting mechanisms. Also add strerror(errno) to the error message. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2015-11-30target-ppc: Move the FPSCR bit update macros to cpu.hMadhavan Srinivasan1-0/+21
Move the FPSCR bit update macros defined in dfp_helper to cpu.h. This way, fpu_helper functions can also use them Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-11ppc: Add/Re-introduce MMU model definitions needed by PR KVMBharata B Rao1-0/+6
Commit aa4bb5875231 (ppc: Add mmu_model defines for arch 2.03 and 2.07) removed the mmu_model definition POWERPC_MMU_2_06a which is needed by PR KVM. Reintroduce it and also add POWERPC_MMU_2_07a. This fixes QEMU crash (qemu: fatal: Unknown MMU model) during booting of PR KVM guest. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23ppc/spapr: Add "ibm,pa-features" property to the device-treeBenjamin Herrenschmidt1-0/+1
LoPAPR defines a "ibm,pa-features" per-CPU device tree property which describes extended features of the Processor Architecture. This adds the property to the device tree. At the moment this is the copy of what pHyp advertises except "I=1 (cache inhibited) Large Pages" which is enabled for TCG and disabled when running under HV KVM host with 4K system page size. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [aik: rebased, changed commit log, moved ci_large_pages initialization, renamed pa_features arrays] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23ppc: Add mmu_model defines for arch 2.03 and 2.07Benjamin Herrenschmidt1-5/+5
This removes unused POWERPC_MMU_2_06a/POWERPC_MMU_2_06d. This replaces POWERPC_MMU_64B with POWERPC_MMU_2_03 for POWER5+ to be more explicit about the version of the PowerISA supported. This defines POWERPC_MMU_2_07 and uses it for the POWER8 CPU family. This will not have an immediate effect now but it will in the following patch. This should cause no behavioural change. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [aik: rebased, changed commit log] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-07target-*: Drop cpu_gen_code defineRichard Henderson1-1/+0
This symbol no longer exists. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.1 at 2024-12-28 16:49:20 +0000