aboutsummaryrefslogtreecommitdiff
path: root/target-cris
AgeCommit message (Collapse)AuthorFilesLines
2016-06-05target-*: dfilter support for in_asmRichard Henderson1-1/+2
The arm target was handled by 06486077, but other targets were ignored. This handles all the rest which actually support disassembly (that is, skipping moxie and tilegx). Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-19cpu: move exec-all.h inclusion out of cpu.hPaolo Bonzini6-2/+5
exec-all.h contains TCG-specific definitions. It is not needed outside TCG-specific files such as translate.c, exec.c or *helper.c. One generic function had snuck into include/exec/exec-all.h; move it to include/qom/cpu.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19qemu-common: push cpu.h inclusion out of qemu-common.hPaolo Bonzini2-0/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19hw: move CPU state serialization to migration/cpu.hPaolo Bonzini1-0/+1
Remove usage of NEED_CPU_H from hw/hw.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19target-cris: make cpu-qom.h not target specificPaolo Bonzini2-40/+41
Make CRISCPU an opaque type within cpu-qom.h, and move all definitions of private methods, as well as all type definitions that require knowledge of the layout to cpu.h. This helps making files independent of NEED_CPU_H if they only need to pass around CPU pointers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-18Fix some typos found by codespellStefan Weil2-3/+3
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-12tcg: Allow goto_tb to any target PC in user modeSergey Fedorov1-6/+12
In user mode, there's only a static address translation, TBs are always invalidated properly and direct jumps are reset when mapping change. Thus the destination address is always valid for direct jumps and there's no need to restrict it to the pages the TB resides in. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Blue Swirl <blauwirbel@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12tcg: Clean up direct block chaining safety checksSergey Fedorov1-1/+3
We don't take care of direct jumps when address mapping changes. Thus we must be sure to generate direct jumps so that they always keep valid even if address mapping changes. Luckily, we can only allow to execute a TB if it was generated from the pages which match with current mapping. Document tcg_gen_goto_tb() declaration and note the reason for destination PC limitations. Some targets with variable length instructions allow TB to straddle a page boundary. However, we make sure that both of TB pages match the current address mapping when looking up TBs. So it is safe to do direct jumps into the both pages. Correct the checks for some of those targets. Given that, we can safely patch a TB which spans two pages. Remove the unnecessary check in cpu_exec() and allow such TBs to be patched. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12tb: consistently use uint32_t for tb->flagsEmilio G. Cota1-1/+1
We are inconsistent with the type of tb->flags: usage varies loosely between int and uint64_t. Settle to uint32_t everywhere, which is superior to both: at least one target (aarch64) uses the most significant bit in the u32, and uint64_t is wasteful. Compile-tested for all targets. Suggested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Suggested-by: Richard Henderson <rth@twiddle.net> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1460049562-23517-1-git-send-email-cota@braap.org>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster1-0/+1
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-01tcg: Add type for vCPU pointersLluís Vilanova1-1/+1
Adds the 'TCGv_env' type for pointers to 'CPUArchState' objects. The tracing infrastructure later needs to differentiate between regular pointers and pointers to vCPUs. Also changes all targets to use the new 'TCGv_env' type instead of the generic 'TCGv_ptr'. As of now, the change is merely cosmetic ('TCGv_env' translates into 'TCGv_ptr'), but that could change in the future to enforce the difference. Note that a 'TCGv_env' type (for 'CPUState') is not added, since all helpers currently receive the architecture-specific pointer ('CPUArchState'). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Acked-by: Richard Henderson <rth@twiddle.net> Message-id: 145641859552.30295.7821536833590725201.stgit@localhost Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-23all: Clean up includesPeter Maydell1-1/+0
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-16cris: Clean up includesPeter Maydell1-0/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-16target-cris: Remove unnecessary ifdef from mmu.cPeter Maydell1-3/+0
mmu.c is only built for CONFIG_SOFTMMU targets, so there is no need to redundantly surround the whole file contents with an #ifndef CONFIG_USER_ONLY. The ifdef also confuses the Coccinelle tool. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-09tcg: Change tcg_global_mem_new_* to take a TCGv_ptrRichard Henderson2-53/+53
Thus, use cpu_env as the parameter, not TCG_AREG0 directly. Update all uses in the translators. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-03log: do not unnecessarily include qom/cpu.hPaolo Bonzini1-0/+1
Split the bits that require it to exec/log.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-8-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-01-29cris: Clean up includesPeter Maydell7-1/+7
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-32-git-send-email-peter.maydell@linaro.org
2015-12-17cris: avoid "naked" qemu_logPaolo Bonzini4-8/+2
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17qemu-log: introduce qemu_log_separatePaolo Bonzini1-2/+4
In some cases, the same message is printed both on stderr and in the log. Avoid duplicate output in the default case where stderr _is_ the log, and standardize this to stderr+log where it used to use stdio+log. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-28target-*: Advance pc after recognizing a breakpointRichard Henderson1-0/+5
Some targets already had this within their logic, but make sure it's present for all targets. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-09qdev: Protect device-list-properties against broken devicesMarkus Armbruster1-0/+7
Several devices don't survive object_unref(object_new(T)): they crash or hang during cleanup, or they leave dangling pointers behind. This breaks at least device-list-properties, because qmp_device_list_properties() needs to create a device to find its properties. Broken in commit f4eb32b "qmp: show QOM properties in device-list-properties", v2.1. Example reproducer: $ qemu-system-aarch64 -nodefaults -display none -machine none -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 50, "minor": 4, "major": 2}, "package": ""}, "capabilities": []}} { "execute": "qmp_capabilities" } {"return": {}} { "execute": "device-list-properties", "arguments": { "typename": "pxa2xx-pcmcia" } } qemu-system-aarch64: /home/armbru/work/qemu/memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed. Aborted (core dumped) [Exit 134 (SIGABRT)] Unfortunately, I can't fix the problems in these devices right now. Instead, add DeviceClass member cannot_destroy_with_object_finalize_yet to mark them: * Hang during cleanup (didn't debug, so I can't say why): "realview_pci", "versatile_pci". * Dangling pointer in cpus: most CPUs, plus "allwinner-a10", "digic", "fsl,imx25", "fsl,imx31", "xlnx,zynqmp", because they create such CPUs * Assert kvm_enabled(): "host-x86_64-cpu", host-i386-cpu", "host-powerpc64-cpu", "host-embedded-powerpc-cpu", "host-powerpc-cpu" (the powerpc ones can't currently reach the assertion, because the CPUs are only registered when KVM is enabled, but the assertion is arguably in the wrong place all the same) Make qmp_device_list_properties() fail cleanly when the device is so marked. This improves device-list-properties from "crashes, hangs or leaves dangling pointers behind" to "fails". Not a complete fix, just a better-than-nothing work-around. In the above reproducer, device-list-properties now fails with "Can't list properties of device 'pxa2xx-pcmcia'". This also protects -device FOO,help, which uses the same machinery since commit ef52358 "qdev-monitor: include QOM properties in -device FOO, help output", v2.2. Example reproducer: $ qemu-system-aarch64 -machine none -device pxa2xx-pcmcia,help Before: qemu-system-aarch64: .../memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed. After: Can't list properties of device 'pxa2xx-pcmcia' Cc: "Andreas Färber" <afaerber@suse.de> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Anthony Green <green@moxielogic.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Jia Liu <proljc@gmail.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Richard Henderson <rth@twiddle.net> Cc: qemu-ppc@nongnu.org Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1443689999-12182-10-git-send-email-armbru@redhat.com>
2015-10-07tcg: Remove gen_intermediate_code_pcRichard Henderson1-44/+6
It is no longer used, so tidy up everything reached by it. This includes the gen_opc_* arrays, the search_pc parameter and the inline gen_intermediate_code_internal functions. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Pass data argument to restore_state_to_opcRichard Henderson1-2/+3
The gen_opc_* arrays are already redundant with the data stored in the insn_start arguments. Transition restore_state_to_opc to use data from the latter. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Add TCG_MAX_INSNSRichard Henderson1-0/+3
Adjust all translators to respect it. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-*: Drop cpu_gen_code defineRichard Henderson1-1/+0
This symbol no longer exists. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-cris: Mirror gen_opc_pc into insn_startRichard Henderson1-1/+2
This perhaps isn't ideal in terms of (ab)using the "pc" field to encode both pc and ppc + delay branch state, as one has to be aware of this when examining opcode dumps. But it preserves existing logic, which will be good for bisection, and it certainly does save storage space. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-*: Introduce and use cpu_breakpoint_testRichard Henderson1-19/+8
Reduce the boilerplate required for each target. At the same time, move the test for breakpoint after calling tcg_gen_insn_start. Note that arm and aarch64 do not use cpu_breakpoint_test, but still move the inline test down after tcg_gen_insn_start. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-*: Increment num_insns immediately after tcg_gen_insn_startRichard Henderson1-2/+2
This does tidy the icount test common to all targets. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-*: Unconditionally emit tcg_gen_insn_startRichard Henderson2-7/+1
While we're at it, emit the opcode adjacent to where we currently record data for search_pc. This puts gen_io_start et al on the "correct" side of the marker. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Rename debug_insn_start to insn_startRichard Henderson2-3/+3
With an eye toward making it mandatory. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-25cris: Remove ELF_MACHINE from cpu.hPeter Crosthwaite1-2/+0
The only generic code relying on this is linux-user, but linux users' default behaviour of defaulting ELF_MACHINE to ELF_ARCH will handle this. The bootloader can just pass EM_CRIS directly, as that is architecture specific code. This removes another architecture specific definition from the global namespace. Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Acked-By: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-17target-cris: update CPU state save/load to use VMStateDescriptionJuan Quintela4-90/+95
Update the CRIS CPU state save/load to use a VMStateDescription struct rather than cpu_save/cpu_load functions. Have to define TLBSet struct. Multidimensional arrays in C are a mess, just unroll them. Signed-off-by: Juan Quintela <quintela@redhat.com> [PMM: * expand commit message a little since it's no longer one patch in a 35-patch series * add header/copyright comment to machine.c; credited copyright is Red Hat and author is Juan, since this commit gives the file all-new contents; license is LGPL-2-or-later, to match other target-cris code * remove hardcoded tab * add fields for locked_irq, interrupt_vector, fault_vector, trap_vector * drop minimum_version_id_old fields * bump version_id to 2 as we are not compatible with old state format * remove unnecessary hw/boards.h include * update to register via dc->vmsd] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-09-11tlb: Add "ifetch" argument to cpu_mmu_index()Benjamin Herrenschmidt3-5/+5
This is set to true when the index is for an instruction fetch translation. The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS acessors. All targets ignore it for now, and all other callers pass "false". This will allow targets who wish to split the mmu index between instruction and data accesses to do so. A subsequent patch will do just that for PowerPC. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Message-Id: <1439796853-4410-2-git-send-email-benh@kernel.crashing.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-11typofixes - v4Veres Lajos2-4/+4
Signed-off-by: Veres Lajos <vlajos@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-08target-cris: Use movcond and setcondRichard Henderson2-30/+9
Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-08-24tcg: Remove tcg_gen_trunc_i64_i32Richard Henderson1-2/+2
Replacing it with tcg_gen_extrl_i64_i32. Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-07-09disas: cris: QOMify target specific disas setupPeter Crosthwaite1-0/+16
Move the target_disas() cris specifics to the QOM disas_set_info() hook and delete the cris specific code in disas.c. This also now adds support for monitor_disas() to cris. E.g. (qemu) xp 0x40004000 0000000040004000: 0x1e6f25f0 And before this patch: (qemu) xp/i 0x40004000 0x40004000: Asm output not supported on this arch After: (qemu) xp/i 0x40004000 0x40004000: di (qemu) xp/i 0x40004002 0x40004002: move.d 0xb003c004,$r1 Note: second example is 6-byte misaligned instruction! Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09cpu-exec: Purge all uses of ENV_GET_CPU()Peter Crosthwaite1-1/+1
Remove un-needed usages of ENV_GET_CPU() by converting the APIs to use CPUState pointers and retrieving the env_ptr as minimally needed. Scripted conversion for target-* change: for I in target-*/cpu.h; do sed -i \ 's/\(^int cpu_[^_]*_exec(\)[^ ][^ ]* \*s);$/\1CPUState *cpu);/' \ $I; done Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09cpu: Change cpu_exec_init() arg to cpu, not envPeter Crosthwaite1-1/+1
The callers (most of them in target-foo/cpu.c) to this function all have the cpu pointer handy. Just pass it to avoid an ENV_GET_CPU() from core code (in exec.c). Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Anthony Green <green@moxielogic.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09cpu: Add Error argument to cpu_exec_init()Bharata B Rao1-1/+1
Add an Error argument to cpu_exec_init() to let users collect the error. This is in preparation to change the CPU enumeration logic in cpu_exec_init(). With the new enumeration logic, cpu_exec_init() can fail if cpu_index values corresponding to max_cpus have already been handed out. Since all current callers of cpu_exec_init() are from instance_init, use error_abort Error argument to abort in case of an error. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-22disas: Remove uses of CPU envPeter Crosthwaite1-1/+1
disas does not need to access the CPU env for any reason. Change the APIs to accept CPU pointers instead. Small change pattern needs to be applied to all target translate.c. This brings us closer to making disas.o a common-obj and less architecture specific in general. Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-03-19cris: remove unused cris_cond15 declarationsMichael Tokarev1-10/+0
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Stefan Weil <sw@weilnetz.de>
2015-03-13tcg: Change translator-side labels to a pointerRichard Henderson2-21/+8
This is improved type checking for the translators -- it's no longer possible to accidentally swap arguments to the branch functions. Note that the code generating backends still manipulate labels as int. With notable exceptions, the scope of the change is just a few lines for each target, so it's not worth building extra machinery to do this change in per-target increments. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Anthony Green <green@moxielogic.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-10cpu: Make cpu_init() return QOM CPUState objectEduardo Habkost1-8/+1
Instead of making cpu_init() return CPUArchState, return CPUState. Changes were made using the Coccinelle semantic patch below. @@ typedef CPUState; identifier e; expression args; type CPUArchState; @@ - e = + cpu = cpu_init(args); - if (!e) { + if (!cpu) { ... } - cpu = ENV_GET_CPU(env); + e = cpu->env_ptr; @@ identifier new_env, new_cpu, env, cpu; type CPUArchState; expression args; @@ -{ - CPUState *cpu = ENV_GET_CPU(env); - CPUArchState *new_env = cpu_init(args); - CPUState *new_cpu = ENV_GET_CPU(new_env); +{ + CPUState *cpu = ENV_GET_CPU(env); + CPUState *new_cpu = cpu_init(args); + CPUArchState *new_env = new_cpu->env_ptr; ... } @@ identifier c, cpu_init_func, cpu_model; type StateType, CPUType; @@ -static inline StateType* cpu_init(const char *cpu_model) -{ - CPUType *c = cpu_init_func(cpu_model); ( - if (c == NULL) { - return NULL; - } - return &c->env; | - if (c) { - return &c->env; - } - return NULL; ) -} +#define cpu_init(cpu_model) CPU(cpu_init_func(cpu_model)) @@ identifier cpu_init_func; identifier model; @@ -#define cpu_init(model) (&cpu_init_func(model)->env) +#define cpu_init(model) CPU(cpu_init_func(model)) Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Anthony Green <green@moxielogic.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Max Filippov <jcmvbkbc@gmail.com> [AF: Fixed up cpu_copy() manually] Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-02-12tcg: Introduce tcg_op_buf_count and tcg_op_buf_fullRichard Henderson1-8/+5
The method by which we count the number of ops emitted is going to change. Abstract that away into some inlines. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Move emit of INDEX_op_end into gen_tb_endRichard Henderson1-1/+1
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-01-20exec.c: Drop TARGET_HAS_ICE define and checksPeter Maydell1-2/+0
The TARGET_HAS_ICE #define is intended to indicate whether a target-* guest CPU implementation supports the breakpoint handling. However, all our guest CPUs have that support (the only two which do not define TARGET_HAS_ICE are unicore32 and openrisc, and in both those cases the bp support is present and the lack of the #define is just a bug). So remove the #define entirely: all new guest CPU support should include breakpoint handling as part of the basic implementation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1420484960-32365-1-git-send-email-peter.maydell@linaro.org
2015-01-03gen-icount: check cflags instead of use_icount globalPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-16qemu-log: add log category for MMU infoAntony Pavlov1-5/+6
Running barebox on qemu-system-mips* with '-d unimp' overloads stderr by very very many mips_cpu_handle_mmu_fault() messages: mips_cpu_handle_mmu_fault address=b80003fd ret 0 physical 00000000180003fd prot 3 mips_cpu_handle_mmu_fault address=a0800884 ret 0 physical 0000000000800884 prot 3 mips_cpu_handle_mmu_fault pc a080cd80 ad b80003fd rw 0 mmu_idx 0 So it's very difficult to find LOG_UNIMP message. The mips_cpu_handle_mmu_fault() messages appear on enabling ANY logging! It's not very handy. Adding separate log category for *_cpu_handle_mmu_fault() logging fixes the problem. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Alexander Graf <agraf@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1418489298-1184-1-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-17target-cris/translate.c: fix out of bounds readzhanghailiang1-6/+2
In function t_gen_mov_TN_preg and t_gen_mov_preg_TN, The begin check about the validity of in-parameter 'r' is useless. We still access cpu_PR[r] in the follow code if it is invalid. Which will be an out-of-bounds read error. Fix it by using assert() to ensure it is valid before using it. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-12-27 09:05:39 +0000