aboutsummaryrefslogtreecommitdiff
path: root/target-arm
AgeCommit message (Collapse)AuthorFilesLines
2015-02-05target-arm: Split NO_MIGRATE into ALIAS and NO_RAWPeter Maydell2-108/+117
We currently mark ARM coprocessor/system register definitions with the flag ARM_CP_NO_MIGRATE for two different reasons: 1) register is an alias on to state that's also visible via some other register, and that other register is the one responsible for migrating the state 2) register is not actually state at all (for instance the TLB or cache maintenance operation "registers") and it makes no sense to attempt to migrate it or otherwise access the raw state This works fine for identifying which registers should be ignored when performing migration, but we also use the same functions for synchronizing system register state between QEMU and the kernel when using KVM. In this case we don't want to try to sync state into registers in category 2, but we do want to sync into registers in category 1, because the kernel might have picked a different one of the aliases as its choice for which one to expose for migration. (In particular, on 32 bit hosts the kernel will expose the state in the AArch32 version of the register, but TCG's convention is to mark the AArch64 version as the version to migrate, even if the CPU being emulated happens to be 32 bit, so almost all system registers will hit this issue now that we've added AArch64 system emulation.) Fix this by splitting the NO_MIGRATE flag in two (ALIAS and NO_RAW) corresponding to the two different reasons we might not want to migrate a register. When setting up the TCG list of registers to migrate we honour both flags; when populating the list from KVM, only ignore registers which are NO_RAW. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Greg Bellows <greg.bellows@linaro.org> Message-id: 1422282372-13735-2-git-send-email-peter.maydell@linaro.org [PMM: changed ARM_CP_NO_MIGRATE to ARM_CP_ALIAS on new SP_EL1 and SP_EL2 reginfo stanzas since there was a (semantic) merge conflict with the patchset that added those]
2015-02-05target-arm: Add missing SP_ELx register definitionGreg Bellows1-0/+8
Added CP register definitions for SP_EL1 and SP_EL2. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1422029835-4696-5-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-05target-arm: Change reset to highest available ELGreg Bellows1-1/+8
Update to arm_cpu_reset() to reset into the highest available exception level based on the set ARM features. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1422029835-4696-4-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-05target-arm: Add extended RVBAR supportGreg Bellows1-6/+25
Added RVBAR_EL2 and RVBAR_EL3 CP register support. All RVBAR_EL# registers point to the same location and only the highest EL version exists at any one time. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1422029835-4696-3-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-05target-arm: Fix RVBAR_EL1 register encodingGreg Bellows1-1/+1
Fix the RVBAR_EL1 CP register opc2 encoding from 2 to 1 Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1422029835-4696-2-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-01-26vmstate: accept QEMUTimer in VMSTATE_TIMER*, add VMSTATE_TIMER_PTR*Paolo Bonzini1-2/+2
Old users of VMSTATE_TIMER* are mechanically changed to VMSTATE_TIMER_PTR variants. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-20exec.c: Drop TARGET_HAS_ICE define and checksPeter Maydell1-2/+0
The TARGET_HAS_ICE #define is intended to indicate whether a target-* guest CPU implementation supports the breakpoint handling. However, all our guest CPUs have that support (the only two which do not define TARGET_HAS_ICE are unicore32 and openrisc, and in both those cases the bp support is present and the lack of the #define is just a bug). So remove the #define entirely: all new guest CPU support should include breakpoint handling as part of the basic implementation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1420484960-32365-1-git-send-email-peter.maydell@linaro.org
2015-01-16target-arm: crypto: fix BE host supportArd Biesheuvel1-51/+63
The crypto emulation code in target-arm/crypto_helper.c never worked correctly on big endian hosts, due to the fact that it uses a union of array types to convert between the native VFP register size (64 bits) and the types used in the algorithms (bytes and 32 bit words) We cannot just swab between LE and BE when reading and writing the registers, as the SHA code performs word additions, so instead, add array accessors for the CRYPTO_STATE type whose LE and BE specific implementations ensure that the correct array elements are referenced. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1420208303-24111-1-git-send-email-ard.biesheuvel@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-01-15target-arm: Fix typo in comment (seperately -> separately)Stefan Weil1-1/+1
Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Greg Bellows <greg.bellows@linaro.org> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-01-12kvm: extend kvm_irqchip_add_msi_route to work on s390Frank Blaschka1-0/+6
on s390 MSI-X irqs are presented as thin or adapter interrupts for this we have to reorganize the routing entry to contain valid information for the adapter interrupt code on s390. To minimize impact on existing code we introduce an architecture function to fixup the routing entry. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-01-09Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell2-6/+6
More migration fixes and more record/replay preparations. Also moves the sdhci-pci device id to make space for the rocker device. # gpg: Signature made Sat 03 Jan 2015 08:22:36 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: pci: move REDHAT_SDHCI device ID to make room for Rocker block/iscsi: fix uninitialized variable pckbd: set bits 2-3-6-7 of the output port by default serial: refine serial_thr_ipending_needed gen-icount: check cflags instead of use_icount global translate: check cflags instead of use_icount global cpu-exec: add a new CF_USE_ICOUNT cflag target-ppc: pass DisasContext to SPR generator functions atomic: fix position of volatile qualifier Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-01-03gen-icount: check cflags instead of use_icount globalPaolo Bonzini2-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-03translate: check cflags instead of use_icount globalPaolo Bonzini2-4/+4
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-22target-arm: add cpu feature EL3 to CPUs with Security ExtensionsFabian Aggeler1-0/+4
Set ARM_FEATURE_EL3 feature for CPUs that implement Security Extensions. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1418684992-8996-16-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22target-arm: Add ARMCPU secure propertyGreg Bellows2-0/+25
Added a "has_el3" state property to the ARMCPU descriptor. This property indicates whether the ARMCPU has security extensions enabled (EL3) or not. By default it is disabled at this time. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1418684992-8996-10-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22target-arm: Add feature unset functionGreg Bellows1-0/+5
Add an unset_feature() function to compliment the set_feature() function. This will be used to disable functions after they have been enabled during initialization. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1418684992-8996-9-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22target-arm: Merge EL3 CP15 register listsGreg Bellows1-31/+24
Merge of the v8_el2_cp_reginfo and el3_cp_reginfo ARMCPRegInfo lists. Previously, some EL3 registers were restricted to the ARMv8 list under the impression that they were not needed on ARMv7. However, this is not the case as the ARMv7/32-bit variants rely on the ARMv8/64-bit variants to handle migration and reset. For this reason they must always exist. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Message-id: 1418406450-14961-1-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: Check error conditions on kvm_arm_reset_vcpuChristoffer Dall1-2/+11
When resetting a VCPU we currently call both kvm_arm_vcpu_init() and write_kvmstate_to_list(), both of which can fail, but we never check the return value. The only choice here is to print an error an exit if the calls fail. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1418039630-11773-1-git-send-email-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: Support save/load for 64 bit CPUsPeter Maydell1-3/+19
For migration to work on 64 bit CPUs, we need to include both the 64-bit integer register file and the PSTATE. Everything else is either stored in the same place as existing 32-bit CPU state or handled by the generic sysreg mechanism. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1417788683-4038-3-git-send-email-peter.maydell@linaro.org
2014-12-11target-arm/kvm: make reg sync code common between kvm32/64Alex Bennée4-101/+137
Before we launch a guest we query KVM for the list of "co-processor" registers it knows about. This is used to synchronize system register state for the bulk of coprocessor/system registers. Move this code from the 32-bit specific vcpu init function into a common routine and call it also from the 64-bit vcpu init. This allows system registers to migrate correctly when using KVM, and also permits QEMU code to see the current KVM register state (which will be needed to support big-endian guests, since the virtio endianness callback must check for some system register settings). Since vcpu reset also has to sync registers, we move the 32 bit kvm_arm_reset_vcpu() into common code as well and share it with the 64 bit version. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> [PMM: just copy the 32-bit code rather than improving it along the way; don't share reg_syncs_via_tuple_list() between 32 and 64 bit; tweak function names; move reset] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: make MAIR0/1 bankedGreg Bellows2-4/+29
Added CP register info entries for the ARMv7 MAIR0/1 secure banks. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-26-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: make c13 cp regs banked (FCSEIDR, ...)Fabian Aggeler3-19/+77
When EL3 is running in AArch32 (or ARMv7 with Security Extensions) FCSEIDR, CONTEXTIDR, TPIDRURW, TPIDRURO and TPIDRPRW have a secure and a non-secure instance. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-25-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: make VBAR bankedGreg Bellows2-3/+12
When EL3 is running in Aarch32 (or ARMv7 with Security Extensions) VBAR has a secure and a non-secure instance, which are mapped to VBAR_EL1 and VBAR_EL3. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-24-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: make PAR bankedFabian Aggeler2-11/+22
When EL3 is running in AArch32 (or ARMv7 with Security Extensions) PAR has a secure and a non-secure instance. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-23-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: make IFAR/DFAR bankedFabian Aggeler3-9/+28
When EL3 is running in AArch32 (or ARMv7 with Security Extensions) IFAR and DFAR have a secure and a non-secure instance. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-22-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: make DFSR bankedFabian Aggeler2-4/+13
When EL3 is running in AArch32 (or ARMv7 with Security Extensions) DFSR has a secure and a non-secure instance. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-21-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: make IFSR bankedFabian Aggeler2-5/+18
When EL3 is running in AArch32 (or ARMv7 with Security Extensions) IFSR has a secure and a non-secure instance. Adds IFSR32_EL2 definition and storage. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-20-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: make DACR bankedFabian Aggeler2-12/+29
When EL3 is running in AArch32 (or ARMv7 with Security Extensions) DACR has a secure and a non-secure instance. Adds definition for DACR32_EL2. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-19-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: make TTBCR bankedFabian Aggeler3-31/+58
Adds secure and non-secure bank register suport for TTBCR. Added new struct to compartmentalize the TCR data and masks. Removed old tcr/ttbcr data and added a 4 element array of the new structs in cp15. This allows for one entry per EL. Added a CP register definition for TCR_EL3. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-18-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: make TTBR0/1 bankedFabian Aggeler2-14/+43
Adds secure and non-secure bank register suport for TTBR0 and TTBR1. Changes include adding secure and non-secure instances of ttbr0 and ttbr1 as well as a CP register definition for TTBR0_EL3. Added a union containing both EL based array fields and secure and non-secure fields mapped to them. Updated accesses to use A32_BANKED_CURRENT_REG_GET macro. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-17-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: make CSSELR bankedFabian Aggeler2-4/+20
Rename CSSELR (cache size selection register) and add secure instance (AArch32). Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-16-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: respect SCR.FW, SCR.AW and SCTLR.NMFIFabian Aggeler1-0/+54
Add checks of SCR AW/FW bits when performing writes of CPSR. These SCR bits are used to control whether the CPSR masking bits can be adjusted from non-secure state. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-15-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add SCTLR_EL3 and make SCTLR bankedFabian Aggeler4-34/+58
Implements SCTLR_EL3 and uses secure/non-secure instance when needed. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-14-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add MVBAR supportFabian Aggeler2-6/+10
Use MVBAR register as exception vector base address for exceptions taken to CPU monitor mode. Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com> Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-13-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add SDER definitionGreg Bellows2-0/+9
Added CP register defintions for SDER and SDER32_EL3 as well as cp15.sder for register storage. Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com> Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-12-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add NSACR registerFabian Aggeler2-0/+5
Implements NSACR register with corresponding read/write functions for ARMv7 and ARMv8. Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com> Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-11-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: implement IRQ/FIQ routing to Monitor modeFabian Aggeler1-0/+9
SCR.{IRQ/FIQ} bits allow to route IRQ/FIQ exceptions to monitor CPU mode. When taking IRQ exception to monitor mode FIQ exception is additionally masked. Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com> Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-10-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: move AArch32 SCR into security reglistFabian Aggeler1-6/+13
Define a new ARM CP register info list for the ARMv7 Security Extension feature. Register that list only for ARM cores with Security Extension/EL3 support. Moving AArch32 SCR into Security Extension register group. Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com> Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-9-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: insert AArch32 cpregs twice into hashtableFabian Aggeler1-17/+81
Prepare for cp register banking by inserting every cp register twice, once for secure world and once for non-secure world. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-8-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add secure state bit to CPREG hashPeter Maydell4-16/+36
Added additional NS-bit to CPREG hash encoding. Updated hash lookup locations to specify hash bit currently set to non-secure. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-7-git-send-email-greg.bellows@linaro.org [PMM: fix uses of ENCODE_CP_REG in kvm32.c to add extra argument] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add CPREG secure state supportFabian Aggeler1-2/+34
Prepare ARMCPRegInfo to support specifying two fieldoffsets per register definition. This will allow us to keep one register definition for banked registers (different offsets for secure/ non-secure world). Also added secure state tracking field and flags. This allows for identification of the register info secure state. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-6-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add non-secure Translation Block flagSergey Fedorov3-0/+29
This patch is based on idea found in patch at git://github.com/jowinter/qemu-trustzone.git f3d955c6c0ed8c46bc0eb10b634201032a651dd2 by Johannes Winter <johannes.winter@iaik.tugraz.at>. The TBFLAG captures the SCR NS secure state at the time when a TB is created so the correct bank is accessed on system register accesses. Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com> Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-5-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add banked register accessorsFabian Aggeler1-0/+27
If EL3 is in AArch32 state certain cp registers are banked (secure and non-secure instance). When reading or writing to coprocessor registers the following macros can be used. - A32_BANKED macros are used for choosing the banked register based on provided input security argument. This macro is used to choose the bank during translation of MRC/MCR instructions that are dependent on something other than the current secure state. - A32_BANKED_CURRENT macros are used for choosing the banked register based on current secure state. This is NOT to be used for choosing the bank used during translation as it breaks monitor mode. If EL3 is operating in AArch64 state coprocessor registers are not banked anymore. The macros use the non-secure instance (_ns) in this case, which is architecturally mapped to the AArch64 EL register. Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com> Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-4-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add async excp target_el functionGreg Bellows1-19/+97
Adds a dedicated function and a lookup table for determining the target exception level of IRQ and FIQ exceptions. The lookup table is taken from the ARMv7 and ARMv8 specification exception routing tables. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-3-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: extend async excp maskingGreg Bellows1-14/+52
This patch extends arm_excp_unmasked() to use lookup tables for determining whether IRQ and FIQ exceptions are masked. The lookup tables are based on the ARMv8 and ARMv7 specification physical interrupt masking tables. If EL3 is using AArch64 IRQ/FIQ masking is ignored in all exception levels other than EL3 if SCR.{FIQ|IRQ} is set to 1 (routed to EL3). Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-2-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11Pass semihosting exit code back to system.Liviu Ionescu1-2/+9
In order to run unit tests under semihosting, it is necessary to pass the application exit code back to the system. ARM defines only the code to be used for non-error application exit (ADP_Stopped_ApplicationExit), all other codes should return non-zero exit codes. This patch checks if the application code passed via TARGET_SYS_EXIT is ADP_Stopped_ApplicationExit, and return 0, otherwise return 1. Signed-off-by: Liviu Ionescu <ilg@livius.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-17target-arm: handle address translations that start at level 3Peter Maydell1-9/+11
The ARMv8 address translation system defines that a page table walk starts at a level which depends on the translation granule size and the number of bits of virtual address that need to be resolved. Where the translation granule is 64KB and the guest sets the TCR.TxSZ field to between 35 and 39, it's actually possible to start at level 3 (the final level). QEMU's implementation failed to handle this case, and so we would set level to 2 and behave incorrectly (including invoking the C undefined behaviour of shifting left by a negative number). Correct the code that determines the starting level to deal with the start-at-3 case, by replacing the if-else ladder with an expression derived from the ARM ARM pseudocode version. This error was detected by the Coverity scan, which spotted the potential shift by a negative number. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1415890569-7454-1-git-send-email-peter.maydell@linaro.org
2014-11-04target-arm: Correct condition for taking VIRQ and VFIQPeter Maydell1-2/+2
The VIRQ and VFIQ exceptions are (as the comments say) only taken if the CPU is in Non-secure state and the IMO/FMO bits are set to enable virtualized interrupts. Correct the code to actually implement this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1414684132-23971-3-git-send-email-peter.maydell@linaro.org
2014-11-04target-arm: Separate out M profile cpu_exec_interrupt handlingPeter Maydell2-24/+41
The M profile cpu_exec_interrupt handling is fairly simple but does include an M profile specific oddity (disabling interrupts for certain PC values). A/R profile handling on the other hand is getting rapidly more complicated with the support for EL2 and EL3. Split the M profile code out into its own implementation of cpu_exec_interrupt to keep these two things out of each others' way. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1414684132-23971-2-git-send-email-peter.maydell@linaro.org
2014-11-04target-arm/translate.c: Don't pass CPUARMState * to disas_arm_insn()Peter Maydell1-6/+5
Refactor to avoid passing a CPUARMState * to disas_arm_insn(). To do this we move the "read insn from memory" code to the callsite and pass the insn to the function instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1414524244-20316-6-git-send-email-peter.maydell@linaro.org Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
generated by cgit v1.1 at 2025-01-11 15:25:19 +0000