aboutsummaryrefslogtreecommitdiff
path: root/target-arm/cpu.c
AgeCommit message (Collapse)AuthorFilesLines
2015-09-07arm: Remove hw_error() usages.Peter Crosthwaite1-2/+2
All of these hw_errors are fatal and indicate something wrong with QEMU implementation. Convert to g_assert_not_reached. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 169194d09017e5725535d31a1507d454c0043706.1440842587.git.crosthwaite.peter@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07arm: cpu: assert() on no-EL2 virt IRQ error condition.Peter Crosthwaite1-4/+1
Replace the hw_error() for no-EL2 VIRQ with an assert. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 93b6acdee6cafe8ff0422a294a5640c3d35f0e17.1440842587.git.crosthwaite.peter@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13target-arm: Add the AArch64 view of the Secure physical timerPeter Maydell1-0/+2
On CPUs with EL3, there are two physical timers, one for Secure and one for Non-secure. Implement this extra timer and the AArch64 registers which access it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1437047249-2357-2-git-send-email-peter.maydell@linaro.org
2015-08-13target-arm: Add debug check for mismatched cpreg resetsPeter Maydell1-0/+23
It's easy to accidentally define two cpregs which both try to reset the same underlying state field (for instance a clash between an AArch64 EL3 definition and an AArch32 banked register definition). if the two definitions disagree about the reset value then the result is dependent on which one happened to be reached last in the hashtable enumeration. Add a consistency check to detect and assert in these cases: after reset, we run a second pass where we check that the reset operation doesn't change the value of the register. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1436797559-20835-1-git-send-email-peter.maydell@linaro.org
2015-08-13target-arm: Add the Hypervisor timerEdgar E. Iglesias1-0/+2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1436791864-4582-6-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-09disas: arm: QOMify target specific disas setupPeter Crosthwaite1-0/+35
Move the target_disas() ARM specifics to the QOM disas_set_info hook and delete the ARM specific code in disas.c. This has the extra advantage of the more fully featured target_disas() implementation now applying to monitor_disas(). Currently, target_disas() has multi-endian, thumb and AArch64 support whereas the existing monitor_disas() support only has vanilla AA32 support. E.G. Running an AA64 linux kernel the following -d in_asm disas happens (taget_disas()): IN: 0x0000000040000000: 580000c0 ldr x0, pc+24 (addr 0x40000018) 0x0000000040000004: aa1f03e1 mov x1, xzr However before this patch, disasing the same from the monitor: (qemu) xp/i 0x40000000 0x0000000040000000: 580000c0 stmdapl r0, {r6, r7} After this patch: (qemu) xp/i 0x40000000 0x0000000040000000: 580000c0 ldr x0, pc+24 (addr 0x40000018) Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09cpu: Change cpu_exec_init() arg to cpu, not envPeter Crosthwaite1-1/+1
The callers (most of them in target-foo/cpu.c) to this function all have the cpu pointer handy. Just pass it to avoid an ENV_GET_CPU() from core code (in exec.c). Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Anthony Green <green@moxielogic.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09cpu: Add Error argument to cpu_exec_init()Bharata B Rao1-1/+1
Add an Error argument to cpu_exec_init() to let users collect the error. This is in preparation to change the CPU enumeration logic in cpu_exec_init(). With the new enumeration logic, cpu_exec_init() can fail if cpu_index values corresponding to max_cpus have already been handed out. Since all current callers of cpu_exec_init() are from instance_init, use error_abort Error argument to abort in case of an error. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster1-1/+0
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-19target-arm: Add support for Cortex-R5Peter Crosthwaite1-0/+38
Introduce a CPU model for the Cortex R5 processor. ARMv7 with MPU, and both thumb and ARM div instructions. Also implement dummy ATCM and BTCM. These CPs are defined for R5 but don't have a lot of meaning in QEMU yet. Raz them so the guest can proceed if they are read. The TCM registers will return a size of 0, indicating no TCM. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: efe213163e6800578494aba864ac30329de4d396.1434501320.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19target-arm: Add registers for PMSAv7Peter Crosthwaite1-0/+6
Define the arm CP registers for PMSAv7 and their accessor functions. RGNR serves as a shared index that indexes into arrays storing the DRBAR, DRSR and DRACR registers. DRBAR and friends have to be VMSDd separately from the CP interface using a new PMSA specific VMSD subsection. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 172cf135fbd8f5cea413c00e71cc1c3cac704744.1434501320.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19target-arm/helper.c: define MPUIR registerPeter Crosthwaite1-0/+18
Define the MPUIR register for MPU supporting ARMv6 and onwards. Currently we only support unified MPU. The size of the unified MPU is defined via the number of "dregions". So just a single config is added to specify this size. (When split MPU is implemented we will add an extra iregions config). Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 9f248950b803a08c8b3c978931663182f7e882e7.1434501320.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19target-arm: Do not reset sysregs marked as ALIASSergey Fedorov1-1/+1
cp_reg_reset() is called from g_hash_table_foreach() which does not define a specific ordering of the hash table iteration. Thus doing reset for registers marked as ALIAS would give an ambiguous result when resetvalue is different for original and alias registers. Exit cp_reg_reset() early when passed an alias register. Then clean up alias register definitions from needless resetvalue and resetfn. In particular, this fixes a bug in the handling of the PMCR register, which had different resetvalues for its 32 and 64-bit views. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1434554713-10220-1-git-send-email-serge.fdrv@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19target-arm: Add the Cortex-M4 CPUAurelio C. Remonda1-0/+11
This patch adds the Cortex-M4 CPU. The M4 is basically the same as the M3, the main differences being the DSP instructions and an optional FPU. Only no-FPU cortex-M4 is implemented here, cortex-M4F is not because the core target-arm code doesn't support the M-profile FPU model yet. Signed-off-by: Aurelio C. Remonda <aurelioremonda@gmail.com> Message-id: 1434461850-4104-1-git-send-email-aurelioremonda@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15arm: Add has-mpu propertyPeter Crosthwaite1-0/+13
For processors that support MPUs, add a property to de-feature it. This is similar to the implementation of the EL3 feature. The processor definition in init sets ARM_FEATURE_MPU if it can support an MPU. post_init exposes the property, defaulting to true. If cleared by the instantiator, ARM_FEATURE_MPU is then removed at realize time. This is to support R profile processors that may or may-not have an MPU configured. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 632918cc48786e868ea18aa6bd12f70597994cad.1434066412.git.peter.crosthwaite@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15target-arm: Add the THUMB_DSP featureAurelio C. Remonda1-0/+4
Create an ARM_FEATURE_THUMB_DSP controlling the Thumb encodings of the 85 DSP instructions (these are all Thumb2). This is enabled for all non-M-profile CPUs with Thumb2 support, as the instructions are mandatory for R and A profiles. On M profile they are optional and not present in the Cortex-M3 (though they are in the M4). The effect of this commit is that we will now treat the DSP encodings as illegal instructions on M3, when previously we incorrectly implemented them. Signed-off-by: Aurelio C. Remonda <aurelioremonda@gmail.com> Message-id: 1434311355-26554-1-git-send-email-aurelioremonda@gmail.com [PMM: added clz/crc32/crc32c and default case to the early-decode switch; minor format/spacing fixups; reworded commit message a bit] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15target-arm: Use the kernel's idea of MPIDR if we're using KVMPavel Fedin1-0/+12
When we're using KVM, the kernel's internal idea of the MPIDR affinity fields must match the values we tell it for the guest vcpu cluster configuration in the device tree. Since at the moment the kernel doesn't support letting userspace tell it the correct affinity fields to use, we must read the kernel's view and reflect that back in the device tree. Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com> Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Message-id: 02f601d0a1e6$90c7d630$b2578290$@samsung.com [PMM: Use a local #define rather than a global variable for the TCG ARM_CPUS_PER_CLUSTER setting. Tweak a comment. Update the commit message.] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29target-arm: Update interrupt handling to use target ELGreg Bellows1-20/+41
Updated the interrupt handling to utilize and report through the target EL exception field. This includes consolidating and cleaning up code where needed. Target EL is now calculated once in arm_cpu_exec_interrupt() and do_interrupt was updated to use the target_el exception field. The necessary code from arm_excp_target_el() was merged in where needed and the function removed. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1429722561-12651-4-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29target-arm: Move setting of exception info into tlb_fillPeter Maydell1-0/+17
Move the code which sets exception information out of arm_cpu_handle_mmu_fault and into tlb_fill. tlb_fill is the only caller which wants to raise_exception() so it makes more sense for it to handle the whole of the exception setup. As part of this cleanup, move the user-mode-only implementation function for the handle_mmu_fault CPU method into cpu.c so we don't need to make it globally visible, and rename the softmmu-only utility function arm_cpu_handle_mmu_fault to arm_tlb_fill so it's clear that it's not the same thing. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-04-26target-arm: Adjust id_aa64pfr0 when has_el3 CPU property disabledSergey Fedorov1-1/+2
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1429669112-29835-1-git-send-email-serge.fdrv@gmail.com Reviewed-by: Greg Bellows <greg.bellows@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-26target-arm: rename c1_coproc to cpacr_el1Sergey Fedorov1-2/+2
Rename the field holding CPACR_EL1 system register state in AArch64 naming style. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> [PMM: also fixed a couple of missed occurrences in cpu.c] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-13target-arm: Add CPU property to disable AArch64Greg Bellows1-1/+4
Adds registration and get/set functions for enabling/disabling the AArch64 execution state on AArch64 CPUs. By default AArch64 execution state is enabled on AArch64 CPUs, setting the property to off, will disable the execution state. The below QEMU invocation would have AArch64 execution state disabled. $ ./qemu-system-aarch64 -machine virt -cpu cortex-a57,aarch64=off Also adds stripping of features from CPU model string in acquiring the ARM CPU by name. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1423736974-14254-2-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-05target-arm: Guest cpu endianness determination for virtio KVM ARM/ARM64Pranavkumar Sawargaonkar1-0/+24
This patch implements a fucntion pointer "virtio_is_big_endian" from "CPUClass" structure for arm/arm64. Function arm_cpu_is_big_endian() is added to determine and return the guest cpu endianness to virtio. This is required for running cross endian guests with virtio on ARM/ARM64. Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Message-id: 1423130382-18640-3-git-send-email-pranavkumar@linaro.org [PMM: check CPSR_E in env->cpsr_uncached, not env->pstate.] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-05target-arm: Change reset to highest available ELGreg Bellows1-1/+8
Update to arm_cpu_reset() to reset into the highest available exception level based on the set ARM features. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1422029835-4696-4-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22target-arm: add cpu feature EL3 to CPUs with Security ExtensionsFabian Aggeler1-0/+4
Set ARM_FEATURE_EL3 feature for CPUs that implement Security Extensions. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1418684992-8996-16-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22target-arm: Add ARMCPU secure propertyGreg Bellows1-0/+23
Added a "has_el3" state property to the ARMCPU descriptor. This property indicates whether the ARMCPU has security extensions enabled (EL3) or not. By default it is disabled at this time. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1418684992-8996-10-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22target-arm: Add feature unset functionGreg Bellows1-0/+5
Add an unset_feature() function to compliment the set_feature() function. This will be used to disable functions after they have been enabled during initialization. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1418684992-8996-9-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: make IFAR/DFAR bankedFabian Aggeler1-1/+1
When EL3 is running in AArch32 (or ARMv7 with Security Extensions) IFAR and DFAR have a secure and a non-secure instance. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-22-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11target-arm: add SCTLR_EL3 and make SCTLR bankedFabian Aggeler1-2/+6
Implements SCTLR_EL3 and uses secure/non-secure instance when needed. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-14-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-04target-arm: Separate out M profile cpu_exec_interrupt handlingPeter Maydell1-10/+39
The M profile cpu_exec_interrupt handling is fairly simple but does include an M profile specific oddity (disabling interrupts for certain PC values). A/R profile handling on the other hand is getting rapidly more complicated with the support for EL2 and EL3. Split the M profile code out into its own implementation of cpu_exec_interrupt to keep these two things out of each others' way. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1414684132-23971-2-git-send-email-peter.maydell@linaro.org
2014-10-24target-arm: Correct sense of the DCZID DZP bitPeter Maydell1-2/+2
The DZP bit in the DCZID system register should be set if the control bits which prohibit use of the DC ZVA instruction have been set (it stands for Data Zero Prohibited). However we had the sense of the test inverted; fix this so that the bit reads correctly. To avoid this regressing the behaviour of the user-mode emulator, we must set the DZE bit in the SCTLR for that config so that userspace continues to see DZP as zero (it was getting the correct result by accident previously). Reported-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Christopher Covington <cov@codeaurora.org> Message-id: 1412959792-20708-1-git-send-email-peter.maydell@linaro.org
2014-10-24target-arm: add emulation of PSCI calls for system emulationRob Herring1-3/+7
Add support for handling PSCI calls in system emulation. Both version 0.1 and 0.2 of the PSCI spec are supported. Platforms can enable support by setting the "psci-conduit" QOM property on the cpus to SMC or HVC emulation and having a PSCI binding in their dtb. Signed-off-by: Rob Herring <rob.herring@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1412865028-17725-7-git-send-email-peter.maydell@linaro.org [PMM: made system reset/off PSCI functions power down the CPU so we obey the PSCI API requirement never to return from them; rearranged how the code is plumbed into the exception system, so that we split "is this a valid call?" from "do the call"] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-24target-arm: do not set do_interrupt handlers for ARM and AArch64 user modesRob Herring1-1/+1
User mode emulation should never get interrupts and thus should not use the system emulation exception handler function. Remove the reference, and '#ifndef USER_MODE_ONLY' the function itself as well, so that we can add system mode only functionality to it. Signed-off-by: Rob Herring <rob.herring@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1412865028-17725-3-git-send-email-peter.maydell@linaro.org
2014-10-24target-arm: add powered off cpu stateRob Herring1-1/+7
Add tracking of cpu power state in order to support powering off of cores in system emuluation. The initial state is determined by the start-powered-off QOM property. Signed-off-by: Rob Herring <rob.herring@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1412865028-17725-2-git-send-email-peter.maydell@linaro.org
2014-10-06gdbstub: Allow target CPUs to specify watchpoint STOP_BEFORE_ACCESS flagPeter Maydell1-0/+1
GDB assumes that watchpoint set via the gdbstub remote protocol will behave in the same way as hardware watchpoints for the target. In particular, whether the CPU stops with the PC before or after the insn which triggers the watchpoint is target dependent. Allow guest CPU code to specify which behaviour to use. This fixes a bug where with guest CPUs which stop before the accessing insn GDB would manually step forward over what it thought was the insn and end up one insn further forward than it should be. We set this flag for the CPU architectures which set gdbarch_have_nonsteppable_watchpoint in gdb 7.7: ARM, CRIS, LM32, MIPS and Xtensa. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Michael Walle <michael@walle.cc> (for lm32) Message-id: 1410545057-14014-1-git-send-email-peter.maydell@linaro.org
2014-09-29target-arm: Add support for VIRQ and VFIQEdgar E. Iglesias1-11/+36
This only implements the external delivery method via the GIC. Acked-by: Greg Bellows <greg.bellows@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1411718914-6608-12-git-send-email-edgar.iglesias@gmail.com [PMM: adjusted following cpu-exec refactoring] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-29target-arm: Break out exception masking to a separate funcEdgar E. Iglesias1-5/+2
Reviewed-by: Greg Bellows <greg.bellows@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1411718914-6608-5-git-send-email-edgar.iglesias@gmail.com [PMM: updated to account for recent cpu-exec refactoring] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-29target-arm: Don't handle c15_cpar changes via tb_flush()Peter Maydell1-5/+0
At the moment we try to handle c15_cpar with the strategy of: * emit generated code which makes assumptions about its value * when the register value changes call tb_flush() to throw away the now-invalid generated code This works because XScale CPUs are always uniprocessor, but it's confusing because it suggests that the same approach can be taken for other registers. It also means we do a tb_flush() on CPU reset, which makes multithreaded linux-user binaries even more likely to fail than would otherwise be the case. Replace it with a combination of TB flags for the access checks done on cp0/cp1 for the XScale and iwMMXt instructions, plus a runtime check for cp2..cp13 coprocessor accesses. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1411056959-23070-1-git-send-email-peter.maydell@linaro.org
2014-09-29target-arm: Implement setting guest breakpointsPeter Maydell1-0/+1
This patch adds support for setting guest breakpoints based on values the guest writes to the DBGBVR and DBGBCR registers. (It doesn't include the code to handle when these breakpoints fire, so has no guest-visible effect.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1410523465-13400-2-git-send-email-peter.maydell@linaro.org
2014-09-25target-arm: Use cpu_exec_interrupt qom hookRichard Henderson1-0/+34
Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-id: 1410626734-3804-15-git-send-email-rth@twiddle.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-12target-arm: Implement handling of fired watchpointsPeter Maydell1-0/+1
Implement the ARM debug exception handler for dealing with fired watchpoints. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-12target-arm: Implement setting of watchpointsPeter Maydell1-0/+2
Implement support for setting QEMU watchpoints based on the values the guest writes to the ARM architected watchpoint registers. (We do not yet report the firing of the watchpoints to the guest, so they will just be ignored.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-12target-arm: Fix broken indentation in arm_cpu_reest()Martin Galvan1-1/+1
Fix a single misindented line in arm_cpu_reset(). Signed-off-by: Martin Galvan <martin.galvan@tallertechnologies.com> [PMM: split this out from the previous commit] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-12target-arm: Fix resetting issues on ARMv7-M CPUsMartin Galvan1-10/+22
When calling qemu_system_reset after startup on a Cortex-M CPU, the initial values of PC, MSP and the Thumb bit weren't being set correctly if the vector table was in ROM. In particular, since Thumb was 0, a Usage Fault would arise immediately after trying to execute any instruction on a Cortex-M. Signed-off-by: Martin Galvan <martin.galvan@tallertechnologies.com> Message-id: CAOKbPbaLt-LJsAKkQdOE0cs9Xx4OWrUfpDhATXPSdtuNw2xu_A@mail.gmail.com [PMM: removed an incorrect comment] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-19arm: cortex-a9: Fix cache-line size and associativityPeter Crosthwaite1-2/+2
For A9, The cache associativity is 4 and the lines size is 32B. Self identify in CCSIDR accordingly. Cache size remains at 16k. QEMU doesn't emulate caches, but we should still report the correct cache-line size to the guest. Some guests (like u-boot) complain if the cache-line size mismatches a requested flush or invalidate operation. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1de6bd40155a1d2f2e93e24b1b1d1d677a432641.1408346233.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-19target-arm: Adjust debug ID registers per-CPUPeter Maydell1-0/+3
Allow each CPU type to specify the value for the debug ID registers, by putting them in the ARMCPU struct, and use the resulting information to only expose the correct number of watchpoint and breakpoint registers for the CPU. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-08-04target-arm: Make far_el1 an arrayEdgar E. Iglesias1-1/+1
No functional change. Prepares for future additions of the EL2 and 3 versions of this reg. Reviewed-by: Greg Bellows <greg.bellows@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1402994746-8328-5-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19target-arm: Introduce per-CPU field for PSCI versionPranavkumar Sawargaonkar1-0/+1
We require to know the PSCI version available to given CPU at potentially many places. Currently, we need to know PSCI version when generating DTB for virt machine. This patch introduce per-CPU 32bit field representing the PSCI version available to the CPU. The encoding of this 32bit field is same as described in PSCI v0.2 spec. Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1402901605-24551-8-git-send-email-pranavkumar@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-09target-arm: VFPv4 implies half-precision extensionPeter Maydell1-2/+1
VFPv4 implies the presence of the half-precision floating point extension (which is optional in VFPv3). Add this implied rule to arm_cpu_realizefn() and remove some no-longer-needed explicit setting of the bit in initfns. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401458125-27977-5-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: Clean up handling of ARMv8 optional feature bitsPeter Maydell1-4/+4
CRC and crypto are both optional v8 extensions, so FEATURE_V8 should not imply them. Instead we should set these bits in the initfns for the 32-bit and 64-bit "cpu any" and for the Cortex-A57. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401458125-27977-4-git-send-email-peter.maydell@linaro.org
generated by cgit v1.1 at 2024-12-28 15:45:58 +0000