aboutsummaryrefslogtreecommitdiff
path: root/stubs/Makefile.objs
AgeCommit message (Collapse)AuthorFilesLines
2018-02-08stubs: Add stubs for ram block APIFam Zheng1-0/+1
These functions will be wanted by block-obj-y but the actual definition is in obj-y, so stub them to keep the linker happy. Signed-off-by: Fam Zheng <famz@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180110091846.10699-2-famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-10-25tpm: add stubsPhilippe Mathieu-Daudé1-0/+1
Commit c37cacabf22 moved tpm_cleanup() in the main loop exit, however this function is not available when compiling with --disable-tpm. Provides necessary stubs to keep code clean of #ifdef'fery. Reported-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20171023102903.256AF7456A0@zero.eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-09-14qmp: introduce query-memory-size-summary commandVadim Galitsyn1-1/+1
Add a new query-memory-size-summary command which provides the following memory information in bytes: * base-memory - size of "base" memory specified with command line option -m. * plugged-memory - amount of memory that was hot-plugged. If target does not have CONFIG_MEM_HOTPLUG enabled, no value is reported. Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com> Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com> Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com> Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: qemu-devel@nongnu.org Message-Id: <20170829153022.27004-3-vadim.galitsyn@profitbricks.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixup comments as per Igor's review Added 'of' from Vadim's reply
2017-09-08hw/acpi: Move acpi_set_pci_info to pcihpAnthony PERARD1-0/+1
HW part of ACPI PCI hotplug in QEMU depends on ACPI_PCIHP_PROP_BSEL being set on a PCI bus that supports ACPI hotplug. It should work regardless of the source of ACPI tables (QEMU generator/legacy SeaBIOS/Xen). So move ACPI_PCIHP_PROP_BSEL initialization into HW ACPI implementation part from QEMU's ACPI table generator. To do PCI passthrough with Xen, the property ACPI_PCIHP_PROP_BSEL needs to be set, but this was done only when ACPI tables are built which is not needed for a Xen guest. The need for the property starts with commit "pc: pcihp: avoid adding ACPI_PCIHP_PROP_BSEL twice" (f0c9d64a68b776374ec4732424a3e27753ce37b6). Adding find_i440fx into stubs so that mips-softmmu target can be built. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-15stubs: Add vm state change handler stubsFam Zheng1-0/+1
They will be used by BlockBackend code in block-obj-y, which doesn't always get linked with common-obj-y. Add stubs to keep ld happy. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170815130740.31229-2-famz@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-04-25move xen-hvm.c to hw/i386/xen/Anthony Xu1-0/+1
move xen-hvm.c to hw/i386/xen/ Signed-off -by: Anthony Xu <anthony.xu@intel.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-04-25move xen-common.c to hw/xen/Anthony Xu1-0/+1
move xen-common.c to hw/xen/ Signed-off -by: Anthony Xu <anthony.xu@intel.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-03-02qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commandsIgor Mammedov1-0/+1
Add commands to query Virtual Machine Generation ID counter. QMP command example: { "execute": "query-vm-generation-id" } HMP command example: info vm-generation-id Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-21block: move AioContext, QEMUTimer, main-loop to libqemuutilPaolo Bonzini1-0/+1
AioContext is fairly self contained, the only dependency is QEMUTimer but that in turn doesn't need anything else. So move them out of block-obj-y to avoid introducing a dependency from io/ to block-obj-y. main-loop and its dependency iohandler also need to be moved, because later in this series io/ will call iohandler_get_aio_context. [Changed copyright "the QEMU team" to "other QEMU contributors" as suggested by Daniel Berrange and agreed by Paolo. --Stefan] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 20170213135235.12274-2-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-16stubs: remove stubs/kvm.cPaolo Bonzini1-1/+0
This has a single function, just move it to the other target/*/kvm.c files. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16build: remove --enable-colo/--disable-coloPaolo Bonzini1-1/+0
No need to provide this knob, so remove it and stubs/migration-colo.c. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16event_notifier: cleanups around event_notifier_set_handlerPaolo Bonzini1-1/+0
Remove the useless is_external argument. Since the iohandler AioContext is never used for block devices, aio_disable_external is never called on it. This lets us remove stubs/iohandler.c. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16stubs: move vhost stubs to stubs/vhost.oPaolo Bonzini1-1/+0
No need to include them in libqemustub.a, since only system emulators need them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16stubs: group all monitor_fdset_* functions in a single filePaolo Bonzini1-4/+1
It makes little sense to implement only one of them, so avoid proliferation of stubs files. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16stubs: group stubs for user-mode emulationPaolo Bonzini1-2/+0
Some stubs are used for user-mode emulation only; they are not needed by tools. Move them out of stubs/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16hw: move reset handlers from vl.c to hw/corePaolo Bonzini1-1/+0
They are small, it is not worth stubbing them. Just include them in user-mode emulators and unit tests as well. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16stubs: remove unused stub for serial_hdPaolo Bonzini1-1/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16stubs: move acpi stubs to hw/acpiPaolo Bonzini1-1/+0
No need to include them in libqemustub.a, since only system emulators need them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16stubs: move smbios stubs to hw/smbiosPaolo Bonzini1-1/+0
No need to include them in libqemustub.a, since only system emulators need them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16stubs: merge all monitor stubs in one file, remove monitor_cur_is_qmp stubPaolo Bonzini1-3/+1
monitor_cur_is_qmp was previously used by other stubs, but it's not since 397d30e ("qemu-error: remove dependency of stubs on monitor", 2016-11-01). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-01qemu-error: remove dependency of stubs on monitorPaolo Bonzini1-1/+1
Leave the implementation of error_vprintf and error_vprintf_unless_qmp (the latter now trivially wrapped by error_printf_unless_qmp) to libqemustub.a and monitor.c. This has two advantages: it lets us remove the monitor_printf and monitor_vprintf stubs, and it lets tests provide a different implementation of the functions that uses g_test_message. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1477326663-67817-2-git-send-email-pbonzini@redhat.com>
2016-10-31Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.8' ↵Peter Maydell1-0/+1
into staging Migration bits from the COLO project # gpg: Signature made Sun 30 Oct 2016 10:39:55 GMT # gpg: using RSA key 0xEB0B4DFC657EF670 # gpg: Good signature from "Amit Shah <amit@amitshah.net>" # gpg: aka "Amit Shah <amit@kernel.org>" # gpg: aka "Amit Shah <amitshah@gmx.net>" # Primary key fingerprint: 48CA 3722 5FE7 F4A8 B337 2735 1E9A 3B5F 8540 83B6 # Subkey fingerprint: CC63 D332 AB8F 4617 4529 6534 EB0B 4DFC 657E F670 * remotes/amit-migration/tags/migration-for-2.8: MAINTAINERS: Add maintainer for COLO framework related files configure: Support enable/disable COLO feature docs: Add documentation for COLO feature COLO: Implement failover work for secondary VM COLO: Implement the process of failover for primary VM COLO: Introduce state to record failover process COLO: Add 'x-colo-lost-heartbeat' command to trigger failover COLO: Synchronize PVM's state to SVM periodically COLO: Add checkpoint-delay parameter for migrate-set-parameters COLO: Load VMState into QIOChannelBuffer before restore it COLO: Send PVM state to secondary side when do checkpoint COLO: Add a new RunState RUN_STATE_COLO COLO: Introduce checkpointing protocol COLO: Establish a new communicating path for COLO migration: Switch to COLO process after finishing loadvm migration: Enter into COLO mode after migration if COLO is enabled COLO: migrate COLO related info to secondary node migration: Introduce capability 'x-colo' to migration Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-30migration: Introduce capability 'x-colo' to migrationzhanghailiang1-0/+1
We add helper function colo_supported() to indicate whether colo is supported or not, with which we use to control whether or not showing 'x-colo' string to users, they can use qmp command 'query-migrate-capabilities' or hmp command 'info migrate_capabilities' to learn if colo is supported. The default value for COLO (COarse-Grain LOck Stepping) is disabled. Cc: Juan Quintela <quintela@redhat.com> Cc: Amit Shah <amit.shah@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-28aio: introduce qemu_get_current_aio_contextPaolo Bonzini1-0/+1
This will be used by BDRV_POLL_WHILE (and thus by bdrv_drain) to choose how to wait for I/O completion. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1477565348-5458-12-git-send-email-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2016-09-06qmp: add QMP interface "query-cpu-model-baseline"David Hildenbrand1-0/+1
Let's provide a standardized interface to baseline two CPU models, to create a third, compatible one. This is especially helpful when two CPU models are not identical, but a CPU model is required that is guaranteed to run under both configurations, where the original models run. "query-cpu-model-baseline" takes two CPU models and returns a third, compatible model. The result will always be a static CPU model. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <20160905085244.99980-28-dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06qmp: add QMP interface "query-cpu-model-comparison"David Hildenbrand1-0/+1
Let's provide a standardized interface to compare two CPU models. "query-cpu-model-compare" takes two models and returns how they compare in a specific configuration. The result will give guarantees about runnability. E.g. if a CPU model A is a subset of CPU model B, model A is guaranteed to run in configurations where model B runs, but not the other way around (might or might not run). Usually, CPU features or CPU generations are used to calculate the result. If a model is not guaranteed to run in a certain environment (e.g. incompatible), a compatible one can be created by "baselining" both models (follow up patch). Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <20160905085244.99980-27-dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06qmp: add QMP interface "query-cpu-model-expansion"David Hildenbrand1-0/+1
Let's provide a standardized interface to expand CPU models. This interface can be used by tooling to get details about a specific CPU model in a certain configuration, e.g. about the "host" model. To take care of all architectures, two detail levels for an expansion are introduced. Certain architectures might not support all detail levels. While "full" will expand and indicate all relevant properties/features of a CPU model, "static" expands to a static base CPU model, that will never change between QEMU versions and therefore have the same features when used under different compatibility machines. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <20160905085244.99980-26-dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-07-18trace: Add per-vCPU tracing states for events with the 'vcpu' propertyLluís Vilanova1-0/+1
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic tracing state of events with the 'vcpu' property. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-24pc: acpi: introduce AcpiDeviceIfClass.madt_cpu hookIgor Mammedov1-0/+1
Add madt_cpu callback to AcpiDeviceIfClass and use it for generating LAPIC MADT entries for CPUs. Later it will be used for generating x2APIC entries in case of more than 255 CPUs and also would be reused by ARM target when ACPI CPU hotplug is introduced there. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: Add IPMI table entriesCorey Minyard1-0/+1
Use the ACPI table construction tools to create an ACPI entry for IPMI. This adds a function called build_acpi_ipmi_devices to add an DSDT entry for IPMI if IPMI is compiled in and an IPMI device exists. It also adds a dummy function if IPMI is not compiled in. This conforms to section "C3-2 Locating IPMI System Interfaces in ACPI Name Space" in the IPMI 2.0 specification. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24ipmi: Add SMBIOS table entryCorey Minyard1-0/+1
Add an IPMI table entry to the SMBIOS. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-22iohandler: Introduce iohandler_get_aio_contextFam Zheng1-0/+1
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-17block: Add bdrv_next_monitor_owned()Max Reitz1-0/+1
Add a function for iterating over all monitor-owned BlockDriverStates so the generic block layer can do so. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-17block: Move some bdrv_*_all() functions to BBMax Reitz1-1/+1
Move bdrv_commit_all() and bdrv_flush_all() to the BlockBackend level. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02blockdev: Keep track of monitor-owned BDSMax Reitz1-0/+1
As a side effect, we can now make x-blockdev-del's check whether a BDS is actually owned by the monitor explicit. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12monitor/target-ppc: Define target_get_monitor_defAlexey Kardashevskiy1-0/+1
At the moment get_monitor_def() returns only registers from statically defined monitor_defs array. However there is a lot of BOOK3S SPRs which are not in the list and cannot be printed from the monitor. This adds a new target platform hook - target_get_monitor_def(). The hook is called if a register was not found in the static array returned by the target_monitor_defs() hook. The hook is only defined for POWERPC, it returns registered SPRs and fails on unregistered ones providing the user with information on what is actually supported on the running CPU. The register value is saved as uint64_t as it is the biggest supported register size; target_ulong cannot be used because of the stub - it is in a "common" code and cannot include "cpu.h", etc; this is also why the hook prototype is redefined in the stub instead of being included from some header. This replaces static descriptors for GPRs, FPRs, SRs with a helper which looks for a value in a corresponding array in the CPUPPCState. The immediate effect is that all 32 SRs can be printed now (instead of 16); later this can be reused for VSX or TM registers. This replaces callbacks for MSR and XER with static descriptors in monitor_defs as they are stored in CPUPPCState. While we are here, this adds "cr" as a synonym of "ccr". Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-05replay: global variables and function stubsPavel Dovgalyuk1-0/+2
This patch adds global variables, defines, function declarations, and function stubs for deterministic VM replay used by external modules. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162337.8676.41538.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-22Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-0/+1
vhost, pc, virtio features, fixes, cleanups New features: VT-d support for devices behind a bridge vhost-user migration support Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 22 Oct 2015 12:39:19 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (37 commits) hw/isa/lpc_ich9: inject the SMI on the VCPU that is writing to APM_CNT i386: keep cpu_model field in MachineState uptodate vhost: set the correct queue index in case of migration with multiqueue piix: fix resource leak reported by Coverity seccomp: add memfd_create to whitelist vhost-user-test: check ownership during migration vhost-user-test: add live-migration test vhost-user-test: learn to tweak various qemu arguments vhost-user-test: wrap server in TestServer struct vhost-user-test: remove useless static check vhost-user-test: move wait_for_fds() out vhost: add migration block if memfd failed vhost-user: use an enum helper for features mask vhost user: add rarp sending after live migration for legacy guest vhost user: add support of live migration net: add trace_vhost_user_event vhost-user: document migration log vhost: use a function for each call vhost-user: add a migration blocker vhost-user: send log shm fd along with log_base ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-22vhost: add vhost_has_free_slot() interfaceIgor Mammedov1-0/+1
it will allow for other parts of QEMU check if it's safe to map memory region during hotplug/runtime. That way hotplug path will have a chance to cancel hotplug operation instead of crashing in vhost_commit(). Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-19qemu-char: convert vc backend to data-driven creationPaolo Bonzini1-1/+0
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19qemu-char: convert spice backend to data-driven creationPaolo Bonzini1-1/+0
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19qemu-char: convert testdev backend to data-driven creationPaolo Bonzini1-1/+0
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19qemu-char: convert braille backend to data-driven creationPaolo Bonzini1-1/+0
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19qemu-char: convert msmouse backend to data-driven creationPaolo Bonzini1-1/+0
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16monitor: remove target-specific code from monitor.cPavel Butsykin1-0/+1
Move target-specific code out of /monitor.c to /target-*/monitor.c, this will avoid code cluttering and using random ifdeffery. The solution is quite simple, but solves the issue of the separation of target-specific code from monitor. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1441899541-1856-3-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-22qerror: Finally unused, clean upMarkus Armbruster1-1/+0
Remove it except for two things in qerror.h: * Two #include to be cleaned up separately to avoid cluttering this patch. * The QERR_ macros. Mark as obsolete. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-01pci-hotplug-old: Has been dead for five major releases, buryMarkus Armbruster1-1/+0
Commit 79ca616 (v1.6.0) accidentally disabled legacy x86-only HMP commands pci_add, pci_del: it defined CONFIG_PCI_HOTPLUG only as make variable, not as preprocessor macro, killing the code conditional on defined(CONFIG_PCI_HOTPLUG_OLD). In all this time, nobody reported the loss. I only noticed it when I tried to test some error reporting change that forced me to touch this old crap again. Fun: git-log hw/pci/pci-hotplug-old.c shows our faith in the backward compatibility god has been strong enough to sacrifice at its altar about a dozen times, but not strong enough to even once verify the legacy feature's still there, let alone works. Remove the commands along with the code backing them. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-10-20block: Code motion to get rid of stubs/blockdev.cMarkus Armbruster1-1/+0
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-25block: Keep DriveInfo alive until BlockDriverState diesMarkus Armbruster1-0/+1
If the BDS's refcnt > 0, drive_del() destroys the DriveInfo, but not the BDS. This can happen in three places: * Device model destruction during unplug: blockdev_auto_del() * Xen IDE unplug: pci_piix3_xen_ide_unplug() * drive_del command when no device model is attached: do_drive_del() The other callers of drive_del are on error paths where refcnt == 1. If the user somehow manages to plug in a device model using a BDS that has gone through drive_del(), the legacy configuration passed in DriveInfo doesn't reach the device model, and automatic deletion on unplug doesn't work. Worse, some device models such as scsi-disk crash when DriveInfo doesn't exist. This is theoretical; I didn't research an actual reproducer. The problem was introduced when we replaced DriveInfo reference counting by BDS reference counting in commit a94a3fa..fa510eb. Fix by keeping DriveInfo alive until its BDS dies. This affects qemu_drive_opts: now you can't reuse the same ID for new drive options until the BDS dies. Before, you could, but since the code always attempts to create a BDS with the same ID next, the enclosing operation "create a new drive" failed anyway. Different error path, same result. Unfortunately, the fix involves use of blockdev.c stuff from block.c, which is a layering violation. Fortunately, my forthcoming BlockBackend work will get rid of it again. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-06backends: Introduce chr-testdevPaolo Bonzini1-0/+1
From: Paolo Bonzini <pbonzini@redhat.com> chr-testdev enables a virtio serial channel to be used for guest initiated qemu exits. hw/misc/debugexit already enables guest initiated qemu exits, but only for PC targets. chr-testdev supports any virtio-capable target. kvm-unit-tests/arm is already making use of this backend. Currently there is a single command implemented, "q". It takes a (prefix) argument for the exit code, thus an exit is implemented by writing, e.g. "1q", to the virtio-serial port. It can be used as: $QEMU ... \ -device virtio-serial-device \ -device virtserialport,chardev=ctd -chardev testdev,id=ctd or, use: $QEMU ... \ -device virtio-serial-device \ -device virtconsole,chardev=ctd -chardev testdev,id=ctd to bind it to virtio-serial port0. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-07-16 21:24:49 +0000