aboutsummaryrefslogtreecommitdiff
path: root/softmmu
AgeCommit message (Collapse)AuthorFilesLines
2021-06-23ui: Make the DisplayType enum entries conditionalThomas Huth1-3/+17
Libvirt's "domcapabilities" command has a way to state whether certain graphic frontends are available in QEMU or not. Originally, libvirt looked at the "--help" output of the QEMU binary to determine whether SDL was available or not (by looking for the "-sdl" parameter in the help text), but since libvirt stopped doing this analysis of the help text, the detection of SDL is currently broken, see: https://bugzilla.redhat.com/show_bug.cgi?id=1790902 QEMU should provide a way via the QMP interface instead. A simple way, without introducing additional commands, is to make the DisplayType enum entries conditional, so that the enum only contains the entries if the corresponding CONFIG_xxx switches have been set. This of course only gives an indication which possibilities have been enabled during compile-time of QEMU (and does not take into account whether modules are later available or not for example - for this we'd need a separate command), but anyway, this should already be good enough for the above bug ticket, and it's a good idea anyway to make the QMP interface conditional here, so let's simply do it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210615090439.70926-1-thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-06-15util/mmap-alloc: Support RAM_NORESERVE via MAP_NORESERVE under LinuxDavid Hildenbrand1-0/+1
Let's support RAM_NORESERVE via MAP_NORESERVE on Linux. The flag has no effect on most shared mappings - except for hugetlbfs and anonymous memory. Linux man page: "MAP_NORESERVE: Do not reserve swap space for this mapping. When swap space is reserved, one has the guarantee that it is possible to modify the mapping. When swap space is not reserved one might get SIGSEGV upon a write if no physical memory is available. See also the discussion of the file /proc/sys/vm/overcommit_memory in proc(5). In kernels before 2.6, this flag had effect only for private writable mappings." Note that the "guarantee" part is wrong with memory overcommit in Linux. Also, in Linux hugetlbfs is treated differently - we configure reservation of huge pages from the pool, not reservation of swap space (huge pages cannot be swapped). The rough behavior is [1]: a) !Hugetlbfs: 1) Without MAP_NORESERVE *or* with memory overcommit under Linux disabled ("/proc/sys/vm/overcommit_memory == 2"), the following accounting/reservation happens: For a file backed map SHARED or READ-only - 0 cost (the file is the map not swap) PRIVATE WRITABLE - size of mapping per instance For an anonymous or /dev/zero map SHARED - size of mapping PRIVATE READ-only - 0 cost (but of little use) PRIVATE WRITABLE - size of mapping per instance 2) With MAP_NORESERVE, no accounting/reservation happens. b) Hugetlbfs: 1) Without MAP_NORESERVE, huge pages are reserved. 2) With MAP_NORESERVE, no huge pages are reserved. Note: With "/proc/sys/vm/overcommit_memory == 0", we were already able to configure it for !hugetlbfs globally; this toggle now allows configuring it more fine-grained, not for the whole system. The target use case is virtio-mem, which dynamically exposes memory inside a large, sparse memory area to the VM. [1] https://www.kernel.org/doc/Documentation/vm/overcommit-accounting Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210510114328.21835-10-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-15memory: Introduce RAM_NORESERVE and wire it up in qemu_ram_mmap()David Hildenbrand1-3/+12
Let's introduce RAM_NORESERVE, allowing mmap'ing with MAP_NORESERVE. The new flag has the following semantics: " RAM is mmap-ed with MAP_NORESERVE. When set, reserving swap space (or huge pages if applicable) is skipped: will bail out if not supported. When not set, the OS will do the reservation, if supported for the memory type. " Allow passing it into: - memory_region_init_ram_nomigrate() - memory_region_init_resizeable_ram() - memory_region_init_ram_from_file() ... and teach qemu_ram_mmap() and qemu_anon_ram_alloc() about the flag. Bail out if the flag is not supported, which is the case right now for both, POSIX and win32. We will add Linux support next and allow specifying RAM_NORESERVE via memory backends. The target use case is virtio-mem, which dynamically exposes memory inside a large, sparse memory area to the VM. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210510114328.21835-9-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-15util/mmap-alloc: Pass flags instead of separate bools to qemu_ram_mmap()David Hildenbrand1-3/+5
Let's pass flags instead of bools to prepare for passing other flags and update the documentation of qemu_ram_mmap(). Introduce new QEMU_MAP_ flags that abstract the mmap() PROT_ and MAP_ flag handling and simplify it. We expose only flags that are currently supported by qemu_ram_mmap(). Maybe, we'll see qemu_mmap() in the future as well that can implement these flags. Note: We don't use MAP_ flags as some flags (e.g., MAP_SYNC) are only defined for some systems and we want to always be able to identify these flags reliably inside qemu_ram_mmap() -- for example, to properly warn when some future flags are not available or effective on a system. Also, this way we can simplify PROT_ handling as well. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210510114328.21835-8-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-15softmmu/memory: Pass ram_flags to qemu_ram_alloc() and qemu_ram_alloc_internal()David Hildenbrand2-19/+14
Let's pass ram_flags to qemu_ram_alloc() and qemu_ram_alloc_internal(), preparing for passing additional flags. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210510114328.21835-7-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-15softmmu/memory: Pass ram_flags to memory_region_init_ram_shared_nomigrate()David Hildenbrand1-9/+9
Let's forward ram_flags instead, renaming memory_region_init_ram_shared_nomigrate() into memory_region_init_ram_flags_nomigrate(). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210510114328.21835-6-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-15softmmu/memory: Pass ram_flags to qemu_ram_alloc_from_fd()David Hildenbrand1-4/+3
Let's pass in ram flags just like we do with qemu_ram_alloc_from_file(), to clean up and prepare for more flags. Simplify the documentation of passed ram flags: Looking at our documentation of RAM_SHARED and RAM_PMEM is sufficient, no need to be repetitive. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210510114328.21835-5-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-15softmmu/physmem: Fix qemu_ram_remap() to handle shared anonymous memoryDavid Hildenbrand1-3/+3
RAM_SHARED now also properly indicates shared anonymous memory. Let's check that flag for anonymous memory as well, to restore the proper mapping. Fixes: 06329ccecfa0 ("mem: add share parameter to memory-backend-ram") Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210406080126.24010-4-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-15softmmu/physmem: Fix ram_block_discard_range() to handle shared anonymous memoryDavid Hildenbrand1-1/+6
We can create shared anonymous memory via "-object memory-backend-ram,share=on,..." which is, for example, required by PVRDMA for mremap() to work. Shared anonymous memory is weird, though. Instead of MADV_DONTNEED, we have to use MADV_REMOVE: MADV_DONTNEED will only remove / zap all relevant page table entries of the current process, the backend storage will not get removed, resulting in no reduced memory consumption and a repopulation of previous content on next access. Shared anonymous memory is internally really just shmem, but without a fd exposed. As we cannot use fallocate() without the fd to discard the backing storage, MADV_REMOVE gets the same job done without a fd as documented in "man 2 madvise". Removing backing storage implicitly invalidates all page table entries with relevant mappings - an additional MADV_DONTNEED is not required. Fixes: 06329ccecfa0 ("mem: add share parameter to memory-backend-ram") Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210406080126.24010-3-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-15softmmu/physmem: Mark shared anonymous memory RAM_SHAREDDavid Hildenbrand1-3/+7
Let's drop the "shared" parameter from ram_block_add() and properly store it in the flags of the ram block instead, such that qemu_ram_is_shared() properly succeeds on all ram blocks that were mapped MAP_SHARED. We'll use this information next to fix some cases with shared anonymous memory. Reviewed-by: Igor Kotrasinski <i.kotrasinsk@partner.samsung.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210406080126.24010-2-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-15runstate: Initialize Error * to NULLPeng Liang1-1/+1
Based on the description of error_setg(), the local variable err in qemu_init_subsystems() should be initialized to NULL. Fixes: efd7ab22fb ("vl: extract qemu_init_subsystems") Cc: qemu-stable@nongnu.org Signed-off-by: Peng Liang <liangpeng10@huawei.com> Message-Id: <20210610131729.3906565-1-liangpeng10@huawei.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-15vl: Fix an assert failure in error pathZhenzhong Duan1-1/+1
Based on the description of error_setg(), the local variable err in qemu_maybe_daemonize() should be initialized to NULL. Without fix, the uninitialized *errp triggers assert failure which doesn't show much valuable information. Before the fix: qemu-system-x86_64: ../util/error.c:59: error_setv: Assertion `*errp == NULL' failed. After fix: qemu-system-x86_64: cannot create PID file: Cannot open pid file: Permission denied Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Message-Id: <20210610084741.456260-1-zhenzhong.duan@intel.com> Cc: qemu-stable@nongnu.org Fixes: 0546c0609c ("vl: split various early command line options to a separate function", 2020-12-10) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-14softmmu: add trace point when bdrv_flush_all failsDaniel P. Berrangé2-1/+9
The VM stop process has to flush outstanding I/O and this is a critical failure scenario that is hard to diagnose. Add a probe point that records the flush return code. Reviewed-by: Connor Kuehl <ckuehl@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-06-11Fix the qemu crash when guest shutdown during checkpointRao, Lei1-0/+1
This patch fixes the following: qemu-system-x86_64: invalid runstate transition: 'colo' ->'shutdown' Aborted (core dumped) Signed-off-by: Lei Rao <lei.rao@intel.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Lukas Straub <lukasstraub2@web.de> Tested-by: Lukas Straub <lukasstraub2@web.de> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-06-04vl: plug -object back into -readconfigPaolo Bonzini1-6/+18
Commit bc2f4fcb1d ("qom: move user_creatable_add_opts logic to vl.c and QAPIfy it", 2021-03-19) switched the creation of objects from qemu_opts_foreach to a bespoke QTAILQ in preparation for supporting JSON syntax in -object. Unfortunately in doing so it lost support for [object] stanzas in configuration files and also for "-set object.ID.KEY=VAL". The latter is hard to re-establish and probably best solved by deprecating -set. This patch uses the infrastructure introduced by the previous two patches in order to parse QOM objects correctly from configuration files. Cc: Markus Armbruster <armbru@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210524105752.3318299-4-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-04vl: plumb keyval-based options into -readconfigPaolo Bonzini1-24/+59
Let -readconfig support parsing command line options into QDict or QemuOpts. This will be used to add back support for objects in -readconfig. Cc: Markus Armbruster <armbru@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210524105752.3318299-3-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-04qemu-config: parse configuration files to a QDictPaolo Bonzini1-2/+2
Change the parser to put the values into a QDict and pass them to a callback. qemu_config_parse's QemuOpts creation is itself turned into a callback function. This is useful for -readconfig to support keyval-based options; getting a QDict from the parser removes a roundtrip from QDict to QemuOpts and then back to QDict. Unfortunately there is a disadvantage in that semantic errors will point to the last line of the group, because the entries of the QDict do not have a location attached. Cc: Kevin Wolf <kwolf@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210524105752.3318299-2-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella1-1/+1
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-28Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210526' ↵Peter Maydell1-0/+10
into staging Adjust types for some memory access functions. Reduce inclusion of tcg headers. Fix watchpoints vs replay. Fix tcg/aarch64 roli expansion. Introduce SysemuCPUOps structure. # gpg: Signature made Thu 27 May 2021 00:43:54 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth-gitlab/tags/pull-tcg-20210526: (31 commits) hw/core: Constify TCGCPUOps target/mips: Fold jazz behaviour into mips_cpu_do_transaction_failed cpu: Move CPUClass::get_paging_enabled to SysemuCPUOps cpu: Move CPUClass::get_memory_mapping to SysemuCPUOps cpu: Move CPUClass::get_phys_page_debug to SysemuCPUOps cpu: Move CPUClass::asidx_from_attrs to SysemuCPUOps cpu: Move CPUClass::write_elf* to SysemuCPUOps cpu: Move CPUClass::get_crash_info to SysemuCPUOps cpu: Move CPUClass::virtio_is_big_endian to SysemuCPUOps cpu: Move CPUClass::vmsd to SysemuCPUOps cpu: Introduce SysemuCPUOps structure cpu: Move AVR target vmsd field from CPUClass to DeviceClass cpu: Rename CPUClass vmsd -> legacy_vmsd cpu: Assert DeviceClass::vmsd is NULL on user emulation cpu: Directly use get_memory_mapping() fallback handlers in place cpu: Directly use get_paging_enabled() fallback handlers in place cpu: Directly use cpu_write_elf*() fallback handlers in place cpu: Introduce cpu_virtio_is_big_endian() cpu: Un-inline cpu_get_phys_page_debug and cpu_asidx_from_attrs cpu: Split as cpu-common / cpu-sysemu ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-26replay: fix watchpoint processing for reverse debuggingPavel Dovgalyuk1-0/+10
This patch enables reverse debugging with watchpoints. Reverse continue scans the execution to find the breakpoints and watchpoints that should fire. It uses helper function replay_breakpoint() for that. But this function needs to access icount, which can't be correct in the middle of TB. Therefore, in case of watchpoint, we have to retranslate the block to allow this access. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Message-Id: <162072430303.827403.7379783546934958566.stgit@pasha-ThinkPad-X280> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-26qemu-config: load modules when instantiating option groupsPaolo Bonzini1-4/+17
Right now the SPICE module is special cased to be loaded when processing of the -spice command line option. However, the spice option group can also be brought in via -readconfig, in which case the module is not loaded. Add a generic hook to load modules that provide a QemuOpts group, and use it for the "spice" and "iscsi" groups. Fixes: #194 Fixes: https://bugs.launchpad.net/qemu/+bug/1910696 Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-26vl: allow not specifying size in -m when using -M memory-backendPaolo Bonzini1-2/+0
Starting in QEMU 6.0's commit f5c9fcb82d ("vl: separate qemu_create_machine", 2020-12-10), a function have_custom_ram_size() replaced the return value of set_memory_options(). The purpose of the return value was to record the presence of "-m size", and if it was not there, change the default RAM size to the size of the memory backend passed with "-M memory-backend". With that commit, however, have_custom_ram_size() is now queried only after set_memory_options has stored the fixed-up RAM size in QemuOpts for "future use". This was actually the only future use of the fixed-up RAM size, so remove that code and fix the bug. Cc: qemu-stable@nongnu.org Fixes: f5c9fcb82d ("vl: separate qemu_create_machine", 2020-12-10) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-26remove qemu-options* from root directoryPaolo Bonzini1-5/+19
These headers are also included from softmmu/vl.c, so they should be in include/. Remove qemu-options-wrapper.h, since elsewhere we include "template" headers directly and #define the parameters in the including file; move qemu-options.h to include/. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-26memory: Introduce log_sync_global() to memory listenerPeter Xu1-10/+23
Some of the memory listener may want to do log synchronization without being able to specify a range of memory to sync but always globally. Such a memory listener should provide this new method instead of the log_sync() method. Obviously we can also achieve similar thing when we put the global sync logic into a log_sync() handler. However that's not efficient enough because otherwise memory_global_dirty_log_sync() may do the global sync N times, where N is the number of flat ranges in the address space. Make this new method be exclusive to log_sync(). Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20210506160549.130416-2-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-26qtest: add a QOM object for qtestPaolo Bonzini2-11/+179
The qtest server right now can only be created using the -qtest and -qtest-log options. Allow an alternative way to create it using "-object qtest,chardev=...,log=...". This is part of the long term plan to make more (or all) of QEMU configurable through QMP and preconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-14Merge remote-tracking branch ↵Peter Maydell1-6/+20
'remotes/dgilbert/tags/pull-migration-20210513a' into staging Migration pull 2021-05-13 Fix of the 2021-05-11 version, with a fix to build on the armhf cross. The largest change in this set is David's changes for ram block size changing; then there's a pile of other cleanups and fixes. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> # gpg: Signature made Thu 13 May 2021 18:36:06 BST # gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full] # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-migration-20210513a: tests/migration: introduce multifd into guestperf tests/qtest/migration-test: Use g_autofree to avoid leaks on error paths tests/migration-test: Fix "true" vs true migration/ram: Use offset_in_ramblock() in range checks migration/multifd: Print used_length of memory block migration/ram: Handle RAM block resizes during postcopy migration/ram: Simplify host page handling in ram_load_postcopy() migration/ram: Discard RAM when growing RAM blocks after ram_postcopy_incoming_init() exec: Relax range check in ram_block_discard_range() migration/ram: Handle RAM block resizes during precopy numa: Make all callbacks of ram block notifiers optional numa: Teach ram block notifiers about resizeable ram blocks util: vfio-helpers: Factor out and fix processing of existing ram blocks migration: Drop redundant query-migrate result @blocked migration/ram: Optimize ram_save_host_page() migration/ram: Reduce unnecessary rate limiting migrate/ram: remove "ram_bulk_stage" and "fpo_enabled" Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-13Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2021-05-12' into ↵Peter Maydell1-6/+0
staging Miscellaneous patches for 2021-05-12 # gpg: Signature made Wed 12 May 2021 17:22:15 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-misc-2021-05-12: Drop the deprecated unicore32 target Drop the deprecated lm32 target block: Drop the sheepdog block driver Remove the deprecated moxie target monitor/qmp: fix race on CHR_EVENT_CLOSED without OOB Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-13exec: Relax range check in ram_block_discard_range()David Hildenbrand1-2/+2
We want to make use of ram_block_discard_range() in the RAM block resize callback when growing a RAM block, *before* used_length is changed. Let's relax the check. As RAM blocks always mmap the whole max_length area, we cannot corrupt unrelated data. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-6-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migration/ram: Handle RAM block resizes during precopyDavid Hildenbrand1-2/+3
Resizing while migrating is dangerous and does not work as expected. The whole migration code works on the usable_length of ram blocks and does not expect this to change at random points in time. In the case of precopy, the ram block size must not change on the source, after syncing the RAM block list in ram_save_setup(), so as long as the guest is still running on the source. Resizing can be trigger *after* (but not during) a reset in ACPI code by the guest - hw/arm/virt-acpi-build.c:acpi_ram_update() - hw/i386/acpi-build.c:acpi_ram_update() Use the ram block notifier to get notified about resizes. Let's simply cancel migration and indicate the reason. We'll continue running on the source. No harm done. Update the documentation. Postcopy will be handled separately. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-5-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Manual merge
2021-05-13numa: Teach ram block notifiers about resizeable ram blocksDavid Hildenbrand1-2/+10
Ram block notifiers are currently not aware of resizes. To properly handle resizes during migration, we want to teach ram block notifiers about resizeable ram. Introduce the basic infrastructure but keep using max_size in the existing notifiers. Supply the max_size when adding and removing ram blocks. Also, notify on resizes. Acked-by: Paul Durrant <paul@xen.org> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: xen-devel@lists.xenproject.org Cc: haxm-team@intel.com Cc: Paul Durrant <paul@xen.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Wenchao Wang <wenchao.wang@intel.com> Cc: Colin Xu <colin.xu@intel.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-3-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13util: vfio-helpers: Factor out and fix processing of existing ram blocksDavid Hildenbrand1-0/+5
Factor it out into common code when a new notifier is registered, just as done with the memory region notifier. This keeps logic about how to process existing ram blocks at a central place. Just like when adding a new ram block, we have to register the max_length. Ram blocks are only "fake resized". All memory (max_length) is mapped. Print the warning from inside qemu_vfio_ram_block_added(). Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-2-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-12Drop the deprecated unicore32 targetMarkus Armbruster1-2/+0
Target unicore32 was deprecated in commit 8e4ff4a8d2b, v5.2.0. See there for rationale. Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-3-armbru@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com>
2021-05-12Drop the deprecated lm32 targetMarkus Armbruster1-2/+0
Target lm32 was deprecated in commit d8498005122, v5.2.0. See there for rationale. Some of its code lives on in device models derived from milkymist ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c. Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-2-armbru@redhat.com> Acked-by: Michael Walle <michael@walle.cc> [Trivial conflicts resolved, reST markup fixed]
2021-05-12Remove the deprecated moxie targetThomas Huth1-2/+0
There are no known users of this CPU anymore, and there are no binaries available online which could be used for regression tests, so the code has likely completely bit-rotten already. It's been marked as deprecated since two releases now and nobody spoke up that there is still a need to keep it, thus let's remove it now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210430160355.698194-1-thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [Commit message typos fixed, trivial conflicts resolved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-05-10accel: move call to accel_init_interfacesClaudio Fontana1-1/+0
move the call for sysemu specifically in machine_run_board_init, mirror the calling sequence for user mode too. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Claudio Fontana <cfontana@suse.de> Message-Id: <20210322132800.7470-23-cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth2-2/+0
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include cpu.h if it's not really necessaryThomas Huth4-4/+0
Stop including cpu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-4-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include hw/boards.h if it's not really necessaryThomas Huth1-1/+0
Stop including hw/boards.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-3-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include sysemu/sysemu.h if it's not really necessaryThomas Huth4-4/+0
Stop including sysemu/sysemu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-2-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-04-01icount: get rid of static variablePavel Dovgalyuk3-8/+8
This patch moves static last_delta variable into timers_state structure to allow correct vmstate operations with icount shift=auto enabled. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Message-Id: <161701335066.1180180.7104085247702343395.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-24m68k: add the virtio devices aliasesLaurent Vivier1-0/+12
Similarly to 5f629d943cb0 ("s390x: fix s390 virtio aliases"), define the virtio aliases. This allows to start machines with virtio devices without knowledge of the implementation type. For instance, we can use "-device virtio-scsi" on m68k, s390x or PC, and the device will be respectively "virtio-scsi-device", "virtio-scsi-ccw" or "virtio-scsi-pci". This already exists for s390x and -ccw interfaces, add them for m68k and MMIO (-device) interfaces. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20210319202335.2397060-3-laurent@vivier.eu> Message-Id: <20210323165308.15244-18-alex.bennee@linaro.org>
2021-03-24qdev: define list of archs with virtio-pci or virtio-ccwLaurent Vivier1-28/+25
This is used to define virtio-*-pci and virtio-*-ccw aliases rather than substracting the CCW architecture from all the others. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20210319202335.2397060-2-laurent@vivier.eu> Message-Id: <20210323165308.15244-17-alex.bennee@linaro.org>
2021-03-23memory: Add offset_in_region to flatview_cb argumentsPeter Maydell1-1/+3
The function flatview_for_each_range() calls a callback for each range in a FlatView. Currently the callback gets the start and length of the range and the MemoryRegion involved, but not the offset within the MemoryRegion. Add this to the callback's arguments; we're going to want it for a new use in the next commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210318174823.18066-4-peter.maydell@linaro.org
2021-03-19Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-03-16-v4' ↵Peter Maydell1-0/+17
into staging QAPI patches patches for 2021-03-16 # gpg: Signature made Fri 19 Mar 2021 15:06:52 GMT # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2021-03-16-v4: qapi: New -compat deprecated-input=crash qapi: Implement deprecated-input=reject for QMP command arguments qapi: Implement deprecated-input=reject for QMP commands test-util-sockets: Add stub for monitor_set_cur() qapi: Implement deprecated-output=hide for QMP introspection monitor: Drop query-qmp-schema 'gen': false hack qapi: Implement deprecated-output=hide for QMP event data qapi: Implement deprecated-output=hide for QMP events qapi: Implement deprecated-output=hide for QMP command results qemu-options: New -compat to set policy for deprecated interfaces qemuutil: remove qemu_set_fd_handler duplicate symbol Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-19qemu-options: New -compat to set policy for deprecated interfacesMarkus Armbruster1-0/+17
New option -compat lets you configure what to do when deprecated interfaces get used. This is intended for testing users of the management interfaces. It is experimental. -compat deprecated-input=<input-policy> configures what to do when deprecated input is received. Input policy can be "accept" (accept silently), or "reject" (reject the request with an error). -compat deprecated-output=<out-policy> configures what to do when deprecated output is sent. Output policy can be "accept" (pass on unchanged), or "hide" (filter out the deprecated parts). Default is "accept". Policies other than "accept" are implemented later in this series. For now, -compat covers only syntactic aspects of QMP, i.e. stuff tagged with feature 'deprecated'. We may want to extend it to cover semantic aspects, CLI, and experimental features. Note that there is no good way for management application to detect presence of -compat: it's not visible output of query-qmp-schema or query-command-line-options. Tolerable, because it's meant for testing. If running with -compat fails, skip the test. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20210318155519.1224118-3-armbru@redhat.com>
2021-03-19hw: Replace anti-social QOM type namesMarkus Armbruster1-1/+1
Several QOM type names contain ',': ARM,bitband-memory etraxfs,pic etraxfs,serial etraxfs,timer fsl,imx25 fsl,imx31 fsl,imx6 fsl,imx6ul fsl,imx7 grlib,ahbpnp grlib,apbpnp grlib,apbuart grlib,gptimer grlib,irqmp qemu,register SUNW,bpp SUNW,CS4231 SUNW,DBRI SUNW,DBRI.prom SUNW,fdtwo SUNW,sx SUNW,tcx xilinx,zynq_slcr xlnx,zynqmp xlnx,zynqmp-pmu-soc xlnx,zynq-xadc These are all device types. They can't be plugged with -device / device_add, except for xlnx,zynqmp-pmu-soc, and I doubt that one actually works. They *can* be used with -device / device_add to request help. Usability is poor, though: you have to double the comma, like this: $ qemu-system-x86_64 -device SUNW,,fdtwo,help Trap for the unwary. The fact that this was broken in device-introspect-test for more than six years until commit e27bd49876 fixed it demonstrates that "the unwary" includes seasoned developers. One QOM type name contains ' ': "ICH9 SMB". Because having to remember just one way to quote would be too easy. Rename the "SUNW,FOO types to "sun-FOO". Summarily replace ',' and ' ' by '-' in the other type names. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210304140229.575481-2-armbru@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-19blockdev: Drop deprecated bogus -drive interface typeMarkus Armbruster1-7/+1
Drop the crap deprecated in commit a1b40bda08 "blockdev: Deprecate -drive with bogus interface type" (v5.1.0). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20210309161214.1402527-5-armbru@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-03-19vl: allow passing JSON to -objectPaolo Bonzini1-12/+21
Extend the ObjectOption code that was added in the previous patch to enable passing JSON to -object. Even though we cannot yet add non-scalar properties with the human-friendly comma-separated syntax, they can now be added as JSON. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210312173547.1283477-4-pbonzini@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-03-19qom: move user_creatable_add_opts logic to vl.c and QAPIfy itPaolo Bonzini1-18/+57
Emulators are currently using OptsVisitor (via user_creatable_add_opts) to parse the -object command line option. This has one extra feature, compared to keyval, which is automatic conversion of integers to lists as well as support for lists as repeated options: -object memory-backend-ram,id=pc.ram,size=1048576000,host-nodes=0,policy=bind So we cannot replace OptsVisitor with keyval right now. Still, this patch moves the user_creatable_add_opts logic to vl.c since it is not needed anywhere else, and makes it go through user_creatable_add_qapi. In order to minimize code changes, the predicate still takes a string. This can be changed later to use the ObjectType QAPI enum directly. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210312173547.1283477-3-pbonzini@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-03-18Merge remote-tracking branch ↵Peter Maydell1-1/+0
'remotes/berrange-gitlab/tags/dep-many-pull-request' into staging Remove many old deprecated features The following features have been deprecated for well over the 2 release cycle we promise ``-drive file=json:{...{'driver':'file'}}`` (since 3.0) ``-vnc acl`` (since 4.0.0) ``-mon ...,control=readline,pretty=on|off`` (since 4.1) ``migrate_set_downtime`` and ``migrate_set_speed`` (since 2.8.0) ``query-named-block-nodes`` result ``encryption_key_missing`` (since 2.10.0) ``query-block`` result ``inserted.encryption_key_missing`` (since 2.10.0) ``migrate-set-cache-size`` and ``query-migrate-cache-size`` (since 2.11.0) ``query-named-block-nodes`` and ``query-block`` result dirty-bitmaps[i].status (since 4.0) ``query-cpus`` (since 2.12.0) ``query-cpus-fast`` ``arch`` output member (since 3.0.0) ``query-events`` (since 4.0) chardev client socket with ``wait`` option (since 4.0) ``acl_show``, ``acl_reset``, ``acl_policy``, ``acl_add``, ``acl_remove`` (since 4.0.0) ``ide-drive`` (since 4.2) ``scsi-disk`` (since 4.2) # gpg: Signature made Thu 18 Mar 2021 09:23:39 GMT # gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full] # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full] # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange-gitlab/tags/dep-many-pull-request: block: remove support for using "file" driver with block/char devices block: remove 'dirty-bitmaps' field from 'BlockInfo' struct block: remove dirty bitmaps 'status' field block: remove 'encryption_key_missing' flag from QAPI hw/scsi: remove 'scsi-disk' device hw/ide: remove 'ide-drive' device chardev: reject use of 'wait' flag for socket client chardevs machine: remove 'arch' field from 'query-cpus-fast' QMP command machine: remove 'query-cpus' QMP command migrate: remove QMP/HMP commands for speed, downtime and cache size monitor: remove 'query-events' QMP command monitor: raise error when 'pretty' option is used with HMP ui, monitor: remove deprecated VNC ACL option and HMP commands Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2024-08-19 12:44:06 +0000