aboutsummaryrefslogtreecommitdiff
path: root/softmmu
AgeCommit message (Collapse)AuthorFilesLines
2020-10-06gdbstub: add reverse continue support in replay modePavel Dovgalyuk1-0/+5
This patch adds support of the reverse continue operation for gdbstub. Reverse continue finds the last breakpoint that would happen in normal execution from the beginning to the current moment. Implementation of the reverse continue replays the execution twice: to find the breakpoints that were hit and to seek to the last breakpoint. Reverse continue loads the previous snapshot and tries to find the breakpoint since that moment. If there are no such breakpoints, it proceeds to the earlier snapshot, and so on. When no breakpoints or watchpoints were hit at all, execution stops at the beginning of the replay log. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Message-Id: <160174522930.12451.6994758004725016836.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06gdbstub: add reverse step support in replay modePavel Dovgalyuk1-3/+11
GDB remote protocol supports two reverse debugging commands: reverse step and reverse continue. This patch adds support of the first one to the gdbstub. Reverse step is intended to step one instruction in the backwards direction. This is not possible in regular execution. But replayed execution is deterministic, therefore we can load one of the prior snapshots and proceed to the desired step. It is equivalent to stepping one instruction back. There should be at least one snapshot preceding the debugged part of the replay log. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> -- v4 changes: - inverted condition in cpu_handle_guest_debug (suggested by Alex Bennée) Message-Id: <160174522341.12451.1498758422543765253.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpus: add handle_interrupt to the CpusAccel interfaceClaudio Fontana1-0/+18
kvm: uses the generic handler qtest: uses the generic handler whpx: changed to use the generic handler (identical implementation) hax: changed to use the generic handler (identical implementation) hvf: changed to use the generic handler (identical implementation) tcg: adapt tcg-cpus to point to the tcg-specific handler Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpus: remove checks for non-NULL cpus_accelClaudio Fontana1-12/+21
now that all accelerators support the CpusAccel interface, we can remove most checks for non-NULL cpus_accel, we just add a sanity check/assert at vcpu creation. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpus: cleanup now unneeded includesClaudio Fontana1-7/+0
Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpus: extract out hvf-specific code to target/i386/hvf/Claudio Fontana1-66/+0
register a "CpusAccel" interface for HVF as well. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> [added const] Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpus: extract out whpx-specific code to target/i386/Claudio Fontana1-79/+0
register a "CpusAccel" interface for WHPX as well. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpus: extract out hax-specific code to target/i386/Claudio Fontana1-79/+1
register a "CpusAccel" interface for HAX as well. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpus: extract out kvm-specific code to accel/kvmClaudio Fontana1-77/+0
register a "CpusAccel" interface for KVM as well. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [added const] Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpus: extract out qtest-specific code to accel/qtestClaudio Fontana1-63/+1
register a "CpusAccel" interface for qtest as well. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpus: extract out TCG-specific code to accel/tcgClaudio Fontana1-504/+1
TCG is the first accelerator to register a "CpusAccel" interface on initialization, providing functions for starting a vcpu, kicking a vcpu, sychronizing state and getting virtual clock and ticks. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [added const] Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpus: prepare new CpusAccel cpu accelerator interfaceClaudio Fontana2-48/+156
The new interface starts unused, will start being used by the next patches. It provides methods for each accelerator to start a vcpu, kick a vcpu, synchronize state, get cpu virtual clock and elapsed ticks. In qemu_wait_io_event, make it clear that APC is used only for HAX on Windows. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05icount: rename functions to be consistent with the module nameClaudio Fontana4-28/+28
Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpu-timers, icount: new modulesClaudio Fontana7-742/+897
refactoring of cpus.c continues with cpu timer state extraction. cpu-timers: responsible for the softmmu cpu timers state, including cpu clocks and ticks. icount: counts the TCG instructions executed. As such it is specific to the TCG accelerator. Therefore, it is built only under CONFIG_TCG. One complication is due to qtest, which uses an icount field to warp time as part of qtest (qtest_clock_warp). In order to solve this problem, provide a separate counter for qtest. This requires fixing assumptions scattered in the code that qtest_enabled() implies icount_enabled(), checking each specific case. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [remove redundant initialization with qemu_spice_init] Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [fix lingering calls to icount_get] Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30exec: Remove MemoryRegion::global_locking fieldPhilippe Mathieu-Daudé1-6/+0
Last uses of memory_region_clear_global_locking() have been removed in commit 7070e085d4 ("acpi: mark PMTIMER as unlocked") and commit 08565552f7 ("cputlb: Move NOTDIRTY handling from I/O path to TLB path"). Remove memory_region_clear_global_locking() and the now unused 'global_locking' field in MemoryRegion. Reported-by: Alexander Bulekov <alxndr@bu.edu> Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200806150726.962-1-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30vl: relocate path to configuration filePaolo Bonzini1-1/+2
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30vl: relocate paths to data directoriesPaolo Bonzini1-12/+28
As an additional advantage, the logic is now unified between POSIX and Win32 systems. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-29qapi: Restrict balloon-related commands to machine codePhilippe Mathieu-Daudé1-1/+1
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Restricting the balloon-related commands to machine.json pulls less QAPI-generated code into user-mode. Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-4-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-23qemu/atomic.h: rename atomic_ to qatomic_Stefan Hajnoczi4-30/+30
clang's C11 atomic_fetch_*() functions only take a C11 atomic type pointer argument. QEMU uses direct types (int, etc) and this causes a compiler error when a QEMU code calls these functions in a source file that also included <stdatomic.h> via a system header file: $ CC=clang CXX=clang++ ./configure ... && make ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid) Avoid using atomic_*() names in QEMU's atomic.h since that namespace is used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h and <stdatomic.h> can co-exist. I checked /usr/include on my machine and searched GitHub for existing "qatomic_" users but there seem to be none. This patch was generated using: $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \ sort -u >/tmp/changed_identifiers $ for identifier in $(</tmp/changed_identifiers); do sed -i "s%\<$identifier\>%q$identifier%g" \ $(git grep -I -l "\<$identifier\>") done I manually fixed line-wrap issues and misaligned rST tables. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-09-09softmmu: Add missing trace-events filePhilippe Mathieu-Daudé6-4/+33
Commit c7f419f584 moved softmmu-only files out of the root directory, but forgot to move the trace events, which should no longer be generated to "trace-root.h". Fix that by adding softmmu/trace-events. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Claudio Fontana <cfontana@suse.de> Message-id: 20200805130221.24487-1-philmd@redhat.com [Rebased onto meson. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-09-03softmmu/cpus: Only set parallel_cpus for SMPRichard Henderson1-1/+10
Do not set parallel_cpus if there is only one cpu instantiated. This will allow tcg to use serial code to implement atomics. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-08-21meson: move SDL and SDL-image detection to mesonPaolo Bonzini1-0/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21meson: link emulators without Makefile.targetPaolo Bonzini1-2/+0
The binaries move to the root directory, e.g. qemu-system-i386 or qemu-arm. This requires changes to qtests, CI, etc. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21meson: convert most of softmmu/Paolo Bonzini2-13/+11
Leave out main.c, it's special due to fuzzing. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21meson: infrastructure for building emulatorsPaolo Bonzini1-1/+1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21configure: prepare CFLAGS/CXXFLAGS/LDFLAGS for MesonPaolo Bonzini1-1/+1
Split between CFLAGS/QEMU_CFLAGS and CXXFLAGS/QEMU_CXXFLAGS so that we will use CFLAGS and CXXFLAGS for flags that we do not want to pass to add_project_arguments. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini4-4/+4
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-27semihosting: defer connect_chardevs a little more to use serialxKONRAD Frederic1-2/+3
With that we can just use -semihosting-config chardev=serial0. [AJB: tweak commit message] Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1592215252-26742-1-git-send-email-frederic.konrad@adacore.com> Message-Id: <20200724064509.331-3-alex.bennee@linaro.org>
2020-07-24Revert "tpm: Clean up error reporting in tpm_init_tpmdev()"Markus Armbruster1-1/+3
This reverts commit d10e05f15d5c3dd5e5cc59c5dfff460d89d48580. We report some -tpmdev failures, but then continue as if all was fine. Reproducer: $ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -chardev null,id=tpm0 -tpmdev emulator,id=tpm0,chardev=chrtpm -device tpm-tis,tpmdev=tpm0 qemu-system-x86_64: -tpmdev emulator,id=tpm0,chardev=chrtpm: tpm-emulator: tpm chardev 'chrtpm' not found. qemu-system-x86_64: -tpmdev emulator,id=tpm0,chardev=chrtpm: tpm-emulator: Could not cleanly shutdown the TPM: No such file or directory QEMU 5.0.90 monitor - type 'help' for more information (qemu) qemu-system-x86_64: -device tpm-tis,tpmdev=tpm0: Property 'tpm-tis.tpmdev' can't find value 'tpm0' $ echo $? 1 This is a regression caused by commit d10e05f15d "tpm: Clean up error reporting in tpm_init_tpmdev()". It's incomplete: be->create(opts) continues to use error_report(), and we don't set an error when it fails. I figure converting the create() methods to Error would make some sense, but I'm not sure it's worth the effort right now. Revert the broken commit instead, and add a comment to tpm_init_tpmdev(). Straightforward conflict in tpm.c resolved. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
2020-07-22Merge remote-tracking branch 'remotes/philmd-gitlab/tags/fw_cfg-20200721' ↵Peter Maydell1-5/+1
into staging fw_cfg patches Fixes the DEADCODE issue reported by Coverity (CID 1430396). CI jobs result: . https://gitlab.com/philmd/qemu/-/pipelines/169086301 # gpg: Signature made Tue 21 Jul 2020 18:52:46 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/fw_cfg-20200721: hw/nvram/fw_cfg: Let fw_cfg_add_from_generator() return boolean value hw/nvram/fw_cfg: Simplify fw_cfg_add_from_generator() error propagation Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-21hw/nvram/fw_cfg: Let fw_cfg_add_from_generator() return boolean valuePhilippe Mathieu-Daudé1-5/+1
Commits b6d7e9b66f..a43770df5d simplified the error propagation. Similarly to commit 6fd5bef10b "qom: Make functions taking Error** return bool, not void", let fw_cfg_add_from_generator() return a boolean value, not void. This allow to simplify parse_fw_cfg() and fixes the error handling issue reported by Coverity (CID 1430396): In parse_fw_cfg(): Variable assigned once to a constant guards dead code. Local variable local_err is assigned only once, to a constant value, making it effectively constant throughout its scope. If this is not the intent, examine the logic to see if there is a missing assignment that would make local_err not remain constant. It's the call of fw_cfg_add_from_generator(): Error *local_err = NULL; fw_cfg_add_from_generator(fw_cfg, name, gen_id, errp); if (local_err) { error_propagate(errp, local_err); return -1; } return 0; If it fails, parse_fw_cfg() sets an error and returns 0, which is wrong. Harmless, because the only caller passes &error_fatal. Reported-by: Peter Maydell <peter.maydell@linaro.org> Fixes: Coverity CID 1430396: 'Constant' variable guards dead code (DEADCODE) Fixes: 6552d87c48 ("softmmu/vl: Let -fw_cfg option take a 'gen_id' argument") Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200721131911.27380-3-philmd@redhat.com>
2020-07-21qom: Change object_get_canonical_path_component() not to mallocMarkus Armbruster1-1/+1
object_get_canonical_path_component() returns a malloced copy of a property name on success, null on failure. 19 of its 25 callers immediately free the returned copy. Change object_get_canonical_path_component() to return the property name directly. Since modifying the name would be wrong, adjust the return type to const char *. Drop the free from the 19 callers become simpler, add the g_strdup() to the other six. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200714160202.3121879-4-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com>
2020-07-11Merge remote-tracking branch 'remotes/philmd-gitlab/tags/avr-port-20200711' ↵Peter Maydell1-0/+2
into staging 8bit AVR port from Michael Rolnik. Michael started to work on the AVR port few years ago [*] and kept improving the code over various series. List of people who help him (in chronological order): - Richard Henderson - Sarah Harris and Edward Robbins - Philippe Mathieu-Daudé and Aleksandar Markovic - Pavel Dovgalyuk - Thomas Huth [*] The oldest contribution I could find on the list is from 2016: https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html Tests included: $ avocado --show=app run -t arch:avr tests/acceptance/ Fetching asset from tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos (1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s) RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0 JOB TIME : 2.35 s $ make check-qtest-avr TEST check-qtest-avr: tests/qtest/boot-serial-test TEST check-qtest-avr: tests/qtest/cdrom-test TEST check-qtest-avr: tests/qtest/device-introspect-test TEST check-qtest-avr: tests/qtest/machine-none-test TEST check-qtest-avr: tests/qtest/qmp-test TEST check-qtest-avr: tests/qtest/qmp-cmd-test TEST check-qtest-avr: tests/qtest/qom-test TEST check-qtest-avr: tests/qtest/test-hmp TEST check-qtest-avr: tests/qtest/qos-test CI results: . https://cirrus-ci.com/build/5697049146425344 . https://gitlab.com/philmd/qemu/-/pipelines/165328058 . https://travis-ci.org/github/philmd/qemu/builds/705817933 . https://app.shippable.com/github/philmd/qemu/runs/822/summary/console # gpg: Signature made Sat 11 Jul 2020 10:03:11 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/avr-port-20200711: (32 commits) target/avr/disas: Fix store instructions display order target/avr/cpu: Fix $PC displayed address target/avr/cpu: Drop tlb_flush() in avr_cpu_reset() target/avr: Add section into QEMU documentation tests/acceptance: Test the Arduino MEGA2560 board tests/boot-serial: Test some Arduino boards (AVR based) hw/avr: Add limited support for some Arduino boards hw/avr: Add some ATmega microcontrollers hw/avr: Add support for loading ELF/raw binaries hw/misc: avr: Add limited support for power reduction device hw/timer: avr: Add limited support for 16-bit timer peripheral hw/char: avr: Add limited support for USART peripheral tests/machine-none: Add AVR support target/avr: Register AVR support with the rest of QEMU target/avr: Add support for disassembling via option '-d in_asm' target/avr: Initialize TCG register variables target/avr: Add instruction translation - CPU main translation function target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - Bit and Bit-test Instructions target/avr: Add instruction translation - Data Transfer Instructions ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-10softmmu/vl: Remove the check for colons in -accel parametersThomas Huth1-5/+0
The new -accel option does not accept colons in the parameters anymore (since it does not convert the parameters to -machine accel=... parameters anymore). Thus we can now remove the check for colons in -accel: $ qemu-system-x86_64 -accel kvm:tcg qemu-system-x86_64: -accel kvm:tcg: invalid accelerator kvm:tcg Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Claudio Fontana <cfontana@suse.de> Message-Id: <20200618074001.13642-1-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10cpu-throttle: new module, extracted from cpus.cClaudio Fontana3-87/+131
move the vcpu throttling functionality into its own module. This functionality is not specific to any accelerator, and it is used currently by migration to slow down guests to try to have migrations converge, and by the cocoa MacOS UI to throttle speed. cpu-throttle contains the controls to adjust and inspect throttle settings, start (set) and stop vcpu throttling, and the throttling function itself that is run periodically on vcpus to make them take a nap. Execution of the throttling function on all vcpus is triggered by a timer, registered at module initialization. No functionality change. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20200629093504.3228-3-cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10softmmu: move softmmu only files from rootClaudio Fontana8-0/+7272
move arch_init, balloon, cpus, ioport, memory, memory_mapping, qtest. They are all specific to CONFIG_SOFTMMU. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200629093504.3228-2-cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10util/qemu-error: prepend guest name to error message to identify affected VM ↵Mario Smarduch1-0/+9
owner This is followup patch to the one submitted back in Oct, 19 https://lists.gnu.org/archive/html/qemu-devel/2019-10/msg02102.html My mistake here, I took my eyes of the mailing list after I got the initial thumbs up. This patch follows up on Markus comments in the above link. Purpose of this patch: We want to print guest name for errors, warnings and info messages. This was the first of two patches the second being MCE errors targeting a VM with guest name prepended. But in a large fleet we see many other errors that disable a VM or crash it. In a large fleet and centralized logging having the guest name enables identify of owner and customer. Signed-off-by: Mario Smarduch <msmarduch@digitalocean.com> Message-Id: <20200626201900.8876-1-msmarduch@digitalocean.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster1-4/+1
When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-10qom: Use returned bool to check for failure, Coccinelle partMarkus Armbruster1-3/+1
The previous commit enables conversion of foo(..., &err); if (err) { ... } to if (!foo(..., errp)) { ... } for QOM functions that now return true / false on success / error. Coccinelle script: @@ identifier fun = { object_apply_global_props, object_initialize_child_with_props, object_initialize_child_with_propsv, object_property_get, object_property_get_bool, object_property_parse, object_property_set, object_property_set_bool, object_property_set_int, object_property_set_link, object_property_set_qobject, object_property_set_str, object_property_set_uint, object_set_props, object_set_propv, user_creatable_add_dict, user_creatable_complete, user_creatable_del }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-29-armbru@redhat.com>
2020-07-10qom: Put name parameter before value / visitor parameterMarkus Armbruster1-6/+6
The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-09Merge remote-tracking branch 'remotes/philmd-gitlab/tags/fw_cfg-20200704' ↵Peter Maydell1-9/+28
into staging firmware (and crypto) patches - add the tls-cipher-suites object, - add the ability to QOM objects to produce data consumable by the fw_cfg device, - let the tls-cipher-suites object implement the FW_CFG_DATA_GENERATOR interface. This is required by EDK2 'HTTPS Boot' feature of OVMF to tell the guest which TLS ciphers it can use. CI jobs results: https://travis-ci.org/github/philmd/qemu/builds/704724619 https://gitlab.com/philmd/qemu/-/pipelines/162938106 https://cirrus-ci.com/build/4682977303068672 # gpg: Signature made Sat 04 Jul 2020 17:37:08 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/fw_cfg-20200704: crypto/tls-cipher-suites: Produce fw_cfg consumable blob softmmu/vl: Allow -fw_cfg 'gen_id' option to use the 'etc/' namespace softmmu/vl: Let -fw_cfg option take a 'gen_id' argument hw/nvram/fw_cfg: Add the FW_CFG_DATA_GENERATOR interface crypto: Add tls-cipher-suites object Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-09Merge remote-tracking branch ↵Peter Maydell1-2/+2
'remotes/kraxel/tags/modules-20200707-pull-request' into staging qom: add support for qom objects in modules. build some devices (qxl, virtio-gpu, ccid, usb-redir) as modules. build braille chardev as module. v2: more verbose comment for "build: fix device module builds" patch. note: qemu doesn't rebuild objects on cflags changes (specifically -fPIC being added when code is switched from builtin to module). Workaround for resulting build errors: "make clean", rebuild. # gpg: Signature made Tue 07 Jul 2020 14:42:16 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/modules-20200707-pull-request: chardev: enable modules, use for braille vga: build virtio-gpu as module vga: build virtio-gpu only once vga: build qxl as module usb: build usb-redir as module ccid: build smartcard as module build: fix device module builds qdev: device module support object: qom module support module: qom module support Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-08Merge remote-tracking branch ↵Peter Maydell1-6/+6
'remotes/kraxel/tags/audio-20200706-pull-request' into staging audio: deprecate -soundhw # gpg: Signature made Mon 06 Jul 2020 20:29:07 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/audio-20200706-pull-request: audio: set default value for pcspk.iobase property pcspk: update docs/system/target-i386-desc.rst.inc audio: add soundhw deprecation notice audio: deprecate -soundhw pcspk audio: create pcspk device early audio: rework pcspk_init() softmmu: initialize spice and audio earlier pc_basic_device_init: drop no_vmport arg pc_basic_device_init: drop has_pit arg pc_basic_device_init: pass PCMachineState audio: deprecate -soundhw hda audio: deprecate -soundhw sb16 audio: deprecate -soundhw gus audio: deprecate -soundhw cs4231a audio: deprecate -soundhw adlib audio: deprecate -soundhw es1370 audio: deprecate -soundhw ac97 audio: add deprecated_register_soundhw stubs: add pci_create_simple stubs: add isa_create_simple Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-07qdev: device module supportGerd Hoffmann1-2/+2
Hook module loading into the places where we need it when building devices as modules. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20200624131045.14512-4-kraxel@redhat.com
2020-07-06softmmu: initialize spice and audio earlierGerd Hoffmann1-6/+6
audiodev must be initialized before machine_set_property so the machine can have audiodev property aliases. spice must initialize before audiodev because the default audiodev is spice only in case spice is actually enabled. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20200702132525.6849-15-kraxel@redhat.com
2020-07-06fuzz: fix broken qtest check at rcu_disable_atforkAlexander Bulekov1-11/+1
The qtest_enabled check introduced in d6919e4 always returns false, as it is called prior to configure_accelerators(). Instead of trying to skip rcu_disable_atfork in qemu_main, simply call rcu_enable_atfork in the fuzzer, after qemu_main returns. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20200618160516.2817-1-alxndr@bu.edu> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-07-03softmmu/vl: Allow -fw_cfg 'gen_id' option to use the 'etc/' namespacePhilippe Mathieu-Daudé1-1/+7
Names of user-provided fw_cfg items are supposed to start with "opt/". However FW_CFG_DATA_GENERATOR items are generated by QEMU, so allow the "etc/" namespace in this specific case. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200623172726.21040-5-philmd@redhat.com>
2020-07-03softmmu/vl: Let -fw_cfg option take a 'gen_id' argumentPhilippe Mathieu-Daudé1-8/+21
The 'gen_id' argument refers to a QOM object able to produce data consumable by the fw_cfg device. The producer object must implement the FW_CFG_DATA_GENERATOR interface. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200623172726.21040-4-philmd@redhat.com>
2020-06-23blockdev: Deprecate -drive with bogus interface typeMarkus Armbruster1-0/+8
Drives with interface types other than if=none are for onboard devices. Unfortunately, any such drives the board doesn't pick up can still be used with -device, like this: $ qemu-system-x86_64 -nodefaults -display none -S -drive if=floppy,id=bogus,unit=7 -device ide-cd,drive=bogus -monitor stdio QEMU 5.0.50 monitor - type 'help' for more information (qemu) info block bogus: [not inserted] Attached to: /machine/peripheral-anon/device[0] Removable device: not locked, tray closed (qemu) info qtree bus: main-system-bus type System [...] bus: ide.1 type IDE dev: ide-cd, id "" ---> drive = "bogus" [...] unit = 0 (0x0) [...] This kind of abuse has always worked. Deprecate it: qemu-system-x86_64: -drive if=floppy,id=bogus,unit=7: warning: bogus if=floppy is deprecated, use if=none Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200622094227.1271650-9-armbru@redhat.com>
2020-06-10accel: Move Xen accelerator code under accel/xen/Philippe Mathieu-Daudé1-1/+1
This code is not related to hardware emulation. Move it under accel/ with the other hypervisors. Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200508100222.7112-1-philmd@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-09-30 13:25:51 +0000