aboutsummaryrefslogtreecommitdiff
path: root/slirp
AgeCommit message (Collapse)AuthorFilesLines
2016-12-21slirp: support dynamic block size for TFTP transfersHervé Poussineau2-15/+19
The blocksize option is defined in RFC 1783 and RFC 2348. We now support block sizes between 1 and 1428 bytes, instead of 512 only. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-12-20slirp, disas: Replace min/max with MIN/MAX macrosYuval Shaia8-21/+16
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-11-14slirp: Fix access to freed memorySamuel Thibault1-0/+17
if_start() goes through the slirp->if_fastq and slirp->if_batchq list of pending messages, and accesses ifm->ifq_so->so_nqueued of its elements if ifm->ifq_so != NULL. When freeing a socket, we thus need to make sure that any pending message for this socket does not refer to the socket any more. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by: Brian Candler <b.candler@pobox.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-13hw: replace most use of qemu_chr_fe_write with qemu_chr_fe_write_allDaniel P. Berrange1-1/+3
The qemu_chr_fe_write method will return -1 on EAGAIN if the chardev backend write would block. Almost no callers of the qemu_chr_fe_write() method check the return value, instead blindly assuming data was successfully sent. In most cases this will lead to silent data loss on interactive consoles, but in some cases (eg RNG EGD) it'll just cause corruption of the protocol being spoken. We unfortunately can't fix the virtio-console code, due to a bug in the Linux guest drivers, which would cause the entire Linux kernel to hang if we delay processing of the incoming data in any way. Fixing this requires first fixing the guest driver to not hold spinlocks while writing to the hvc device backend. Fixes bug: https://bugs.launchpad.net/qemu/+bug/1586756 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1473170165-540-4-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-16slirp: Rename "struct arphdr" to "struct slirp_arphdr"Thomas Huth2-7/+7
struct arphdr is already used by the system headers on OpenBSD and thus QEMU does not compile here anymore. Fix it by renaming our struct to slirp_arphdr instead. Reported-by: Brad Smith Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1471249494-17392-1-git-send-email-thuth@redhat.com Buglink: https://bugs.launchpad.net/qemu/+bug/1613133 Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-08error: Strip trailing '\n' from error string arguments (again)Markus Armbruster1-4/+4
Commit 9af9e0f, 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they keep coming back. checkpatch.pl tries to flag them since commit 5d596c2, but it's not very good at it. Offenders tracked down with Coccinelle script scripts/coccinelle/err-bad-newline.cocci, an updated version of the script from commit 312fd5f. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1470224274-31522-2-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-07-12Clean up decorations and whitespace around header guardsMarkus Armbruster3-3/+6
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12Clean up ill-advised or unusual header guardsMarkus Armbruster14-29/+29
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12Clean up header guards that don't match their file nameMarkus Armbruster2-4/+4
Header guard symbols should match their file name to make guard collisions less likely. Offenders found with scripts/clean-header-guards.pl -vn. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12Use #include "..." for our own headers, <...> for othersMarkus Armbruster15-18/+17
Tracked down with an ugly, brittle and probably buggy Perl script. Also move includes converted to <...> up so they get included before ours where that's obviously okay. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-03slirp: Add support for stateless DHCPv6Thomas Huth4-2/+244
Provide basic support for stateless DHCPv6 (see RFC 3736) so that guests can also automatically boot via IPv6 with SLIRP (for IPv6 network booting, see RFC 5970 for details). Tested with: qemu-system-ppc64 -nographic -vga none -boot n -net nic \ -net user,ipv6=yes,ipv4=no,tftp=/path/to/tftp,bootfile=ppc64.img Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-07-03slirp: Remove superfluous memset() calls from the TFTP codeThomas Huth1-4/+0
Commit fad7fb9ccd8013ea03 ("Add IPv6 support to the TFTP code") refactored some common code for preparing the mbuf into a new function called tftp_prep_mbuf_data(). One part of this common code is to do a "memset(m->m_data, 0, m->m_size);" for the related buffer first. However, at two spots, the memset() was not removed from the calling function, so it currently done twice in these code paths. Thus let's delete these superfluous memsets in the calling functions now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-07-03slirp: Add RDNSS advertisementSamuel Thibault2-5/+34
This adds the RDNSS option to IPv6 router advertisements, so that the guest can autoconfigure the DNS server address. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com> --- Changes since last submission: - Disable on windows, until we have support for it
2016-07-03slirp: Support link-local DNS addressesSamuel Thibault3-7/+32
They look like fe80::%eth0 Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com> --- Changes since last submission: - fix windows build
2016-07-03slirp: Add dns6 resolutionSamuel Thibault4-24/+69
This makes get_dns_addr address family-agnostic, thus allowing to add the IPv6 case. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-07-03slirp: Split get_dns_addrSamuel Thibault1-19/+34
Separate get_dns_addr into get_dns_addr_cached and get_dns_addr_resolv_conf to make conversion to IPv6 easier. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-06-07slirp: Use DIV_ROUND_UPLaurent Vivier1-2/+2
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d). This patch is the result of coccinelle script scripts/coccinelle/round.cocci CC: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-07all: Remove unnecessary glib.h includesPeter Maydell2-2/+0
Remove glib.h includes, as it is provided by osdep.h. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-19qemu-common: stop including qemu/host-utils.h from qemu-common.hPaolo Bonzini1-0/+1
Move it to the actual users. There are some inclusions of qemu/host-utils.h in headers, but they are all necessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-18Fix some typos found by codespellStefan Weil1-1/+1
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-16slirp: Clean up osdep.h related header inclusionsThomas Huth3-3/+0
qemu/osdep.h is included in some headers twice - one time should be sufficient. Also remove the inclusion of time.h since that is already done by osdep.h, too (this makes scripts/clean-includes happy again). Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-05-16slirp: Remove some unused code from slirp.hThomas Huth1-22/+0
These hunks are apparently not used anymore, so let's delete them. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-05-16slirp: Remove obsolete backward-compatibility cruftThomas Huth3-61/+0
The slirp code does not use index() and gethostid() anymore, so these parts can be removed without problems. memmove() and strerror() should be available on each of the supported platforms nowadays, too, so these wrappers are also not needed anymore. And we certainly also do not support Ultrix anymore, so no need to keep the code for this platform anymore. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-05-16slirp: Clean up slirp_config.hThomas Huth1-87/+0
There are a lot of unused #defines / #undefs in slirp_config.h, which are apparently left-overs from the very early slirp code. Since there is no more code that uses them, let's simply remove them from our version of slirp. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-04-28slirp: fix guest network access with darwin hostSamuel Thibault4-3/+15
On Darwin, connect, sendto and friends want the exact size of the sockaddr, not more (and in particular, not sizeof(struct sockaddr_storaget)) This commit adds the sockaddr_size helper to be used when passing a sockaddr size to such function, and makes use of it int sendto and connect calls. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: John Arbuckle <programmingkidx@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-15wxx: Fix broken TCP networking (regression)Stefan Weil2-5/+1
It is broken since commit c619644067f98098dcdbc951e2dda79e97560afa. Reported-by: Michael Fritscher <michael@fritscher.net> Tested-by: Michael Fritscher <michael@fritscher.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2016-04-07slirp: handle deferred ECONNREFUSED on non-blocking TCP socketsSteven Luo2-1/+7
slirp currently only handles ECONNREFUSED in the case where connect() returns immediately with that error; since we use non-blocking sockets, most of the time we won't receive the error until we later try to read from the socket. Ensure that we deliver the appropriate RST to the guest in this case. Signed-off-by: Steven Luo <steven+qemu@steven676.net> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-04-07slirp: Propagate host TCP RST to the guest.Edgar E. Iglesias1-1/+16
When the host aborts (RST) its side of a TCP connection we need to propagate that RST to the guest. The current code can leave such guest connections dangling forever. Spotted by Jason Wessel. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [steven@steven676.net: coding style adjustments] Signed-off-by: Steven Luo <steven+qemu@steven676.net> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-04-07slirp: avoid use-after-free in slirp_pollfds_poll() if soread() returns an errorSteven Luo3-8/+23
Samuel Thibault pointed out that it's possible that slirp_pollfds_poll() will try to use a socket even after soread() returns an error, resulting in an use-after-free if the socket was removed while handling the error. Avoid this by refusing to continue to work with the socket in this case. Signed-off-by: Steven Luo <steven+qemu@steven676.net> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-04-07slirp: don't crash when tcp_sockclosed() is called with a NULL tpSteven Luo1-2/+5
Signed-off-by: Steven Luo <steven+qemu@steven676.net> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-04-01slirp: Allow disabling IPv4 or IPv6Samuel Thibault6-2/+30
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and IPv6-only network environments. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-04-01slirp: Fix migration from older versions of QEMU to the current oneThomas Huth1-18/+26
While adding the IPv6 support, the commit eae303ff23f51259eddc8856c71453d8 ("slirp: Make Socket structure IPv6 compatible") changed the format of the migration stream, without taking into account that we might still receive an old migration stream layout when upgrading from QEMU version 2.5 (or older) to QEMU 2.6. Currently, QEMU bails out when doing a migration from QEMU 2.5 to the recent master version when it has been started with a "-net user,guestfwd=..." network. So let's fix this by checking the version ID of the migration stream and by using the old behavior if we've detected version 3 or less. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-03-29Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into ↵Peter Maydell8-37/+38
staging slirp updates # gpg: Signature made Tue 29 Mar 2016 00:16:05 BST using RSA key ID FB6B2F1D # gpg: Good signature from "Samuel Thibault <samuel.thibault@gnu.org>" # gpg: aka "Samuel Thibault <sthibault@debian.org>" # gpg: aka "Samuel Thibault <samuel.thibault@inria.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@labri.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6 # Subkey fingerprint: F632 74CD C630 0873 CB3D 29D9 E3E5 1CE8 FB6B 2F1D * remotes/thibault/tags/samuel-thibault: Rework ipv6 options Use C99 flexible array instead of 1-byte trailing array Avoid embedding struct mbuf in other structures slirp: send icmp6 errors when UDP send failed slirp: Fix memory leak on small incoming ipv4 packet Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-29Use C99 flexible array instead of 1-byte trailing arrayPeter Maydell1-4/+2
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-03-23Avoid embedding struct mbuf in other structuresSamuel Thibault5-30/+34
struct mbuf uses a C99 open char array to allow inlining data. Inlining this in another structure is however a GNU extension. The inlines used so far in struct Slirp were actually only needed as head of struct mbuf lists. This replaces these inline with mere struct quehead, and use casts as appropriate. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-22slirp: send icmp6 errors when UDP send failedSamuel Thibault1-2/+1
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-22slirp: Fix memory leak on small incoming ipv4 packetSamuel Thibault1-1/+1
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa2-0/+2
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-16slirp/slirp.h: Remove now-empty #ifdefsPeter Maydell1-24/+0
After automatic cleanup to remove unnecessary #includes of headers that osdep.h provides, slirp.h has a few now unnecessary #ifdef/#endif pairs; remove them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1456237112-32662-2-git-send-email-peter.maydell@linaro.org
2016-03-15slirp: Add IPv6 support to the TFTP codeThomas Huth4-72/+100
Add the handler code for incoming TFTP packets to udp6_input(), and make sure that the TFTP code can send packets with both, udp_output() and udp6_output() by introducing a wrapper function called tftp_udp_output(). Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-03-15qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addressesYann Bordenave2-22/+14
This patch adds parameters to manage some new options in the qemu -net command. Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in argument to the qemu command. Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3. Signed-off-by: Yann Bordenave <meow@meowstars.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15slirp: Adding IPv6 address for DNS relayGuillaume Subiron4-1/+41
This patch adds an IPv6 address to the DNS relay. in6_equal_dns() is developed using this Slirp attribute. sotranslate_in/out/accept() are also updated to manage the IPv6 case so the guest can be able to join the host using one of the Slirp addresses. For now this only points to localhost. Further development will be needed to automatically fetch the IPv6 address from resolv.conf, and announce this via RDNSS. Signed-off-by: Guillaume Subiron <maethor@subiron.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15slirp: Handle IPv6 in TCP functionsGuillaume Subiron6-9/+125
This patch adds IPv6 case in TCP functions refactored by the last patches. This also adds IPv6 pseudo-header in tcpiphdr structure. Finally, tcp_input() is called by ip6_input(). Signed-off-by: Guillaume Subiron <maethor@subiron.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15slirp: Reindent after refactoringGuillaume Subiron3-92/+91
No code change. Signed-off-by: Guillaume Subiron <maethor@subiron.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15slirp: Generalizing and neutralizing various TCP functions before adding ↵Guillaume Subiron7-31/+109
IPv6 stuff Basically, this patch adds some switch in various TCP functions to prepare them for the IPv6 case. To have something to "switch" in tcp_input() and tcp_respond(), a new argument is used to give them the sa_family of the addresses they are working on. This patch does not include the entailed reindentation, to make proofread easier. Reindentation is adressed in the following no-op patch. Signed-off-by: Guillaume Subiron <maethor@subiron.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15slirp: Factorizing tcpiphdr structure with an unionGuillaume Subiron8-45/+106
This patch factorizes the tcpiphdr structure to put the IPv4 fields in an union, for addition of version 6 in further patch. Using some macros, retrocompatibility of the existing code is assured. This patch also fixes the SLIRP_MSIZE and margin computation in various functions, and makes them compatible with the new tcpiphdr structure, whose size will be bigger than sizeof(struct tcphdr) + sizeof(struct ip) Signed-off-by: Guillaume Subiron <maethor@subiron.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15slirp: Adding IPv6 UDP supportGuillaume Subiron6-9/+208
This adds the sin6 case in the fhost and lhost unions and related macros. It adds udp6_input() and udp6_output(). It adds the IPv6 case in sorecvfrom(). Finally, udp_input() is called by ip6_input(). Signed-off-by: Guillaume Subiron <maethor@subiron.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15slirp: Adding ICMPv6 error sendingYann Bordenave3-3/+84
Adding icmp6_send_error to send ICMPv6 Error messages. This function is simpler than the v4 version. Adding some calls in various functions to send ICMP errors, when a received packet is too big, or when its hop limit is 0. Signed-off-by: Yann Bordenave <meow@meowstars.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15slirp: Fix ICMP error sendingYann Bordenave7-17/+18
Disambiguation : icmp_error is renamed into icmp_send_error, since it doesn't manage errors, but only sends ICMP Error messages. Signed-off-by: Yann Bordenave <meow@meowstars.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15slirp: Adding IPv6, ICMPv6 Echo and NDP autoconfigurationGuillaume Subiron12-6/+1019
This patch adds the functions needed to handle IPv6 packets. ICMPv6 and NDP headers are implemented. Slirp is now able to send NDP Router or Neighbor Advertisement when it receives Router or Neighbor Solicitation. Using a 64bit-sized IPv6 prefix, the guest is now able to perform stateless autoconfiguration (SLAAC) and to compute its IPv6 address. This patch adds an ndp_table, mainly inspired by arp_table, to keep an NDP cache and manage network address resolution. Slirp regularly sends NDP Neighbor Advertisement, as recommended by the RFC, to make the guest refresh its route. This also adds ip6_cksum() to compute ICMPv6 checksums using IPv6 pseudo-header. Some #define ETH_* are moved upper in slirp.h to make them accessible to other slirp/*.h Signed-off-by: Guillaume Subiron <maethor@subiron.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.1 at 2024-12-25 05:44:23 +0000