aboutsummaryrefslogtreecommitdiff
path: root/slirp/misc.c
AgeCommit message (Collapse)AuthorFilesLines
2011-08-20Use glib memory allocation and free functionsAnthony Liguori1-1/+1
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23slirp: Forward ICMP echo requests via unprivileged socketsJan Kiszka1-0/+13
Linux 3.0 gained support for unprivileged ICMP ping sockets. Use this feature to forward guest pings to the outer world. The host admin has to set the ping_group_range in order to grant access to those sockets. To allow ping for the users group (GID 100): echo 100 100 > /proc/sys/net/ipv4/ping_group_range Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23slirp: Put forked exec into separate process groupJan Kiszka1-1/+2
Recent smb daemons tend to terminate themselves via a process group SIGTERM. If the daemon is still in qemu's group by that time, qemu will die as well. Avoid this by always pushing fork_exec processes into a group of their own, not just (unused) type 2 execs. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-29add a service to reap zombies, use it in SLIRPPaolo Bonzini1-1/+4
SLIRP -smb support wants to fork a process and forget about reaping it. To please it, add a generic service to register a process id and let QEMU reap it. In the future it could be enhanced to pass a status, but this would be unused. With this in place, the SIGCHLD signal handler would not stomp on pclose anymore. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21slirp: Remove unused code for bad sprintfStefan Weil1-42/+0
Neither DECLARE_SPRINTF nor BAD_SPRINTF are needed for QEMU. QEMU won't support systems with missing or bad declarations for sprintf. The unused code was detected while looking for functions with missing format checking. Instead of adding GCC_FMT_ATTR, the unused code was removed. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-16monitor: Separate "default monitor" and "current monitor" cleanlyMarkus Armbruster1-1/+1
Commits 376253ec..731b0364 introduced global variable cur_mon, which points to the "default monitor" (if any), except during execution of monitor_read() or monitor_control_read() it points to the monitor from which we're reading instead (the "current monitor"). Monitor command handlers run within monitor_read() or monitor_control_read(). Default monitor and current monitor are really separate things, and squashing them together is confusing and error-prone. For instance, usb_host_scan() can run both in "info usbhost" and periodically via usb_host_auto_check(). It prints to cur_mon, which is what we want in the former case: the monitor executing "info usbhost". But since that's the default monitor in the latter case, it periodically spams the default monitor there. A few places use cur_mon to log stuff to the default monitor. If we ever log something while cur_mon points to current monitor instead of default monitor, the log temporarily "jumps" to another monitor. Whether that can or cannot happen isn't always obvious. Maybe logging to the default monitor (which may not even exist) is a bad idea, and we should log to stderr or a logfile instead. But that's outside the scope of this commit. Change cur_mon to point to the current monitor. Create new default_mon to point to the default monitor. Update users of cur_mon accordingly. This fixes the periodical spamming of the default monitor by usb_host_scan(). It also stops "log jumping", should that problem exist.
2010-02-10don't dereference NULL after failed strdupJim Meyering1-1/+1
Most of these are obvious NULL-deref bug fixes, for example, the ones in these files: block/curl.c net.c slirp/misc.c and the first one in block/vvfat.c. The others in block/vvfat.c may not lead to an immediate segfault, but I traced the two schedule_rename(..., strdup(path)) uses, and a failed strdup would appear to trigger this assertion in handle_renames_and_mkdirs: assert(commit->path); The conversion to use qemu_strdup in envlist_to_environ is not technically needed, but does avoid a theoretical leak in the caller when strdup fails for one value, but later succeeds in allocating another buffer(plausible, if one string length is much larger than the others). The caller does not know the length of the returned list, and as such can only free pointers until it hits the first NULL. If there are non-NULL pointers beyond the first, their buffers would be leaked. This one is admittedly far-fetched. The two in linux-user/main.c are worth fixing to ensure that an OOM error is diagnosed up front, rather than letting it provoke some harder-to-diagnose secondary error, in case of exec failure, or worse, in case the exec succeeds but with an invalid list of command line options. However, considering how unlikely it is to encounter a failed strdup early in main, this isn't a big deal. Note that adding the required uses of qemu_strdup here and in envlist.c induce link failures because qemu_strdup is not currently in any library they're linked with. So for now, I've omitted those changes, as well as the fixes in target-i386/helper.c and target-sparc/helper.c. If you'd like to see the above discussion (or anything else) in the commit log, just let me know and I'll be happy to adjust. >From 9af42864fd1ea666bd25e2cecfdfae74c20aa8c7 Mon Sep 17 00:00:00 2001 From: Jim Meyering <meyering@redhat.com> Date: Mon, 8 Feb 2010 18:29:29 +0100 Subject: [PATCH] don't dereference NULL after failed strdup Handle failing strdup by replacing each use with qemu_strdup, so as not to dereference NULL or trigger a failing assertion. * block/curl.c (curl_open): s/\bstrdup\b/qemu_strdup/ * block/vvfat.c (init_directories): Likewise. (get_cluster_count_for_direntry, check_directory_consistency): Likewise. * net.c (parse_host_src_port): Likewise. * slirp/misc.c (fork_exec): Likewise. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-25slirp/misc.c: fix warning with _FORTIFY_SOURCEKirill A. Shutemov1-8/+2
CC slirp/misc.o cc1: warnings being treated as errors slirp/misc.c: In function 'fork_exec': slirp/misc.c:209: error: ignoring return value of 'write', declared with attribute warn_unused_result make: *** [slirp/misc.o] Error 1 Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-03Don't leak file descriptorsKevin Wolf1-2/+2
We're leaking file descriptors to child processes. Set FD_CLOEXEC on file descriptors that don't need to be passed to children to stop this misbehaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Use internal state in interfaceJan Kiszka1-2/+1
This now also exports the internal state to the slirp users in qemu, returning it from slirp_init and expecting it along with service invocations. Additionally provide an opaque value interface for the callbacks from slirp into the qemu core. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Factor out internal state structureJan Kiszka1-2/+3
The essence of this patch is to stuff (almost) all global variables of the slirp stack into the structure Slirp. In this step, we still keep the structure as global variable, directly accessible by the whole stack. Changes to the external interface of slirp will be applied in the following patches. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Clean up timeout handling around slirp_select_fill/pollJan Kiszka1-2/+0
Again lot of dead code. Remove it. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Factor out one-time initializationJan Kiszka1-17/+0
In order to prepare re-initialization and multi-instance slirp, factor out init code that is of global scope and (at least for now) only need to be run once. This also fixes the potentially uninitialized use of our_addr in get_dns_addr. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Cleanup and basic reanimation of debug codeJan Kiszka1-0/+4
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Drop dead codeJan Kiszka1-525/+0
After all its years inside the qemu tree, there is no point in keeping the dead code paths of slirp. This patch is a first round of removing usually commented out code parts. More cleanups need to follow (and maybe finally a proper reindention). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Add info usernet for dumping connection statesJan Kiszka1-0/+86
Break out sockstats from the slirp statistics and present them under the new info category "usernet". This patch also improves the current output /wrt proper reporting connection source and destination. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Rework internal configurationJan Kiszka1-4/+5
The user mode IP stack is currently only minimally configurable /wrt to its virtual IP addresses. This is unfortunate if some guest has a fixed idea of which IP addresses to use. Therefore this patch prepares the stack for fully configurable IP addresses and masks. The user interface and default addresses remain untouched in this step, they will be enhanced in the following patch. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-13Fix mingw32 build warningsBlue Swirl1-1/+5
Work around buffer and ioctlsocket argument type signedness problems Suppress a prototype which is unused on mingw32 Expand a macro to avoid warnings from some GCC versions Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-04-05Fix some win32 compile warningsblueswir11-1/+5
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6984 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-16Delete some unused macros detected with -Wp,-Wunused-macros useblueswir11-1/+0
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6856 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07Sparse fixes: NULL use, header order, ANSI prototypes, staticblueswir11-20/+10
Fix Sparse warnings: * use NULL instead of plain 0 * rearrange header include order to avoid redefining types accidentally * ANSIfy SLIRP * avoid "restrict" keyword * add static git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6736 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Rework API (Jan Kiszka)aliguori1-2/+2
Refactor the monitor API and prepare it for decoupled terminals: term_print functions are renamed to monitor_* and all monitor services gain a new parameter (mon) that will once refer to the monitor instance the output is supposed to appear on. However, the argument remains unused for now. All monitor command callbacks are also extended by a mon parameter so that command handlers are able to pass an appropriate reference to monitor output services. For the case that monitor outputs so far happen without clearly identifiable context, the global variable cur_mon is introduced that shall once provide a pointer either to the current active monitor (while processing commands) or to the default one. On the mid or long term, those use case will be obsoleted so that this variable can be removed again. Due to the broad usage of the monitor interface, this patch mostly deals with converting users of the monitor API. A few of them are already extended to pass 'mon' from the command handler further down to internal functions that invoke monitor_printf. At this chance, monitor-related prototypes are moved from console.h to a new monitor.h. The same is done for the readline API. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13Fix 64 bit issue in slirpblueswir11-33/+0
Signed-off-by: Gleb Natapov <gleb@redhat.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6288 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08Redirect slirp traffic to/from qemu character device (Gleb Natapov)aliguori1-1/+1
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6240 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-15Use common objects for qemu-img and qemu-nbdaliguori1-14/+0
Right now, we sprinkle #if defined(QEMU_IMG) && defined(QEMU_NBD) all over the code. It's ugly and causes us to have to build multiple object files for linking against qemu and the tools. This patch introduces a new file, qemu-tool.c which contains enough for qemu-img, qemu-nbd, and QEMU to all share the same objects. This also required getting qemu-nbd to be a bit more Windows friendly. I also changed the Windows block-raw to use normal IO instead of overlapping IO since we don't actually do AIO yet on Windows. I changed the various #if 0's to #if WIN32_AIO to make it easier for someone to eventually fix AIO on Windows. After this patch, there are no longer any #ifdef's related to qemu-img and qemu-nbd. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5226 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-14Fix warnings that would be caused by gcc flag -Wwrite-stringsblueswir11-2/+2
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5206 c046a42c-6fe2-441c-8c8c-71466251a162
2008-08-21Fix OpenBSD linker warningsblueswir11-2/+3
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5044 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-10Special-case CTL_ALIAS instead of CTL_DNS in udp loopback test.balrog1-1/+1
At the same time remove a bogus test (tested by Jason Wessel). Quiet some gcc4 warnings from slirp compilation. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4402 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-13Revert an accidental change in previous commit.balrog1-0/+2
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3634 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-13Prevent cpsr_write/_read be put out of line in op.o (fixes a segfault on ↵balrog1-2/+0
some platforms). git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3633 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-11removed warningbellard1-0/+2
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3592 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-30Declare function before use, reduces compiler warning noise.ths1-0/+2
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3490 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-26 Use const and static as needed, disable unused codeblueswir11-13/+10
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3452 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-26Make Slirp statistics gathering and output conditional to LOG_ENABLEDblueswir11-0/+11
Add 'info slirp' command to monitor to display statistics Disable Slirp debugging code by default git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3451 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-17find -type f | xargs sed -i 's/[\t ]*$//g' # Yes, again. Note the star in ↵ths1-30/+30
the regex. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3177 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16find -type f | xargs sed -i 's/[\t ]$//g' # on most filesths1-86/+86
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2006-05-03separate alias_addr (10.0.2.2) from our_addr (Ed Swierk)bellard1-4/+2
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1895 c046a42c-6fe2-441c-8c8c-71466251a162
2006-04-23Fix slirp redirection on systems without a useful host IP address.pbrook1-9/+10
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1837 c046a42c-6fe2-441c-8c8c-71466251a162
2004-12-12slirp fix for -smb command (Initial patch by Juergen Keil)bellard1-4/+8
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1172 c046a42c-6fe2-441c-8c8c-71466251a162
2004-10-10openpty fixbellard1-4/+4
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1119 c046a42c-6fe2-441c-8c8c-71466251a162
2004-09-05allow inetd like program execbellard1-2/+18
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1060 c046a42c-6fe2-441c-8c8c-71466251a162
2004-07-12win32 compilebellard1-4/+4
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1016 c046a42c-6fe2-441c-8c8c-71466251a162
2004-04-22initial user mode network supportbellard1-0/+925
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@733 c046a42c-6fe2-441c-8c8c-71466251a162