aboutsummaryrefslogtreecommitdiff
path: root/slirp/libslirp.h
AgeCommit message (Collapse)AuthorFilesLines
2013-09-17slirp: set mainloop timeout with more precise valueLiu Ping Fan1-2/+1
If slirp needs to emulate tcp timeout, then the timeout value for mainloop should be more precise, which is determined by slirp's fasttimo or slowtimo. Achieve this by swap the logic sequence of slirp_pollfds_fill and slirp_update_timeout. Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2013-02-21slirp: switch to GPollFDStefan Hajnoczi1-4/+2
Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-15slirp: Add domain-search option to slirp's DHCP serverKlaus Stengel1-1/+2
This patch will allow the user to include the domain-search option in replies from the built-in DHCP server. The domain suffixes can be specified by adding dnssearch= entries to the "-net user" parameter. [Jan: tiny style adjustments] Signed-off-by: Klaus Stengel <Klaus.Stengel@asamnet.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-08-01net: determine if packets can be sent before net queue deliver packetsZhi Yong Wu1-1/+0
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-04-26main_loop_wait: block indefinitelyStefano Stabellini1-0/+1
- remove qemu_calculate_timeout; - explicitly size timeout to uint32_t; - introduce slirp_update_timeout; - pass NULL as timeout argument to select in case timeout is the maximum value; Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-21main-loop: create main-loop.cPaolo Bonzini1-11/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-09-09Fix include statements for qemu-common.hStefan Weil1-1/+1
* qemu-common.h is not a system include file, so it should be included with "" instead of <>. Otherwise incremental builds might fail because only local include files are checked for changes. * linux-user/syscall.c included the file twice. Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2009-08-27slirp: Read host DNS config on demandEd Swierk1-0/+2
Currently the qemu user-mode networking stack reads the host DNS configuration (/etc/resolv.conf or the Windows equivalent) only once when qemu starts. This causes name lookups in the guest to fail if the host is moved to a different network from which the original DNS servers are unreachable, a common occurrence when the host is a laptop. This patch changes the slirp code to read the host DNS configuration on demand, caching the results for at most 1 second to avoid unnecessary overhead if name lookups occur in rapid succession. On non-Windows hosts, /etc/resolv.conf is re-read only if the file has been replaced or if its size or mtime has changed. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27slirp: Fix guestfwd for incoming dataJan Kiszka1-1/+1
Unless a virtual server address was explicitly defined (which is impossible with the legacy -net channel format), guestfwd did not properly forwarded host->guest packets. This patch fixes it. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Allocate/free stack instance dynamicallyJan Kiszka1-0/+1
Allocate the internal slirp state dynamically and provide and call slirp_cleanup to properly release it after use. This patch finally unbreaks slirp release and re-instantiation via host_net_* monitor commands. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Use internal state in interfaceJan Kiszka1-16/+19
This now also exports the internal state to the slirp users in qemu, returning it from slirp_init and expecting it along with service invocations. Additionally provide an opaque value interface for the callbacks from slirp into the qemu core. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Factor out internal state structureJan Kiszka1-0/+3
The essence of this patch is to stuff (almost) all global variables of the slirp stack into the structure Slirp. In this step, we still keep the structure as global variable, directly accessible by the whole stack. Changes to the external interface of slirp will be applied in the following patches. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Kill slirp_is_initedJan Kiszka1-1/+13
Avoid the need for slirp_is_inited by refactoring the protected slirp_select_* functions. This also avoids the clearing of all fd sets on select errors. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Drop statistic codeJan Kiszka1-1/+0
As agreed on the mailing list, there is no interest in keeping the usually disabled slirp statistics in the tree. So this patch removes them. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Drop dead codeJan Kiszka1-8/+0
After all its years inside the qemu tree, there is no point in keeping the dead code paths of slirp. This patch is a first round of removing usually commented out code parts. More cleanups need to follow (and maybe finally a proper reindention). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Add info usernet for dumping connection statesJan Kiszka1-0/+4
Break out sockstats from the slirp statistics and present them under the new info category "usernet". This patch also improves the current output /wrt proper reporting connection source and destination. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Bind support for host forwarding rulesJan Kiszka1-3/+2
Extend the hostfwd rule format so that the user can specify on which host interface qemu should listen for incoming connections. If omitted, binding will takes place against all interfaces. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Rework external configuration interfaceJan Kiszka1-11/+13
With the internal IP configuration made more flexible, we can now enhance the user interface. This patch adds a number of new options to "-net user": net (address and mask), host, dhcpstart, dns and smbserver. It also renames "redir" to "hostfwd" and "channel" to "guestfwd" in order to (hopefully) clarify their meanings. The format of guestfwd is extended so that the user can define not only the port but also the virtual server's IP address the forwarding starts from. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Move smb, redir, tftp and bootp parameters and -net channelJan Kiszka1-3/+2
So far a couple of slirp-related parameters were expressed via stand-alone command line options. This it inconsistent and unintuitive. Moreover, it prevents both dynamically reconfigured (host_net_add/ delete) and multi-instance slirp. This patch refactors the configuration by turning -smb, -redir, -tftp and -bootp as well as -net channel into options of "-net user". The old stand-alone command line options are still processed, but no longer advertised. This allows smooth migration of management applications to to the new syntax and also the extension of that syntax later in this series. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29Revert "User networking: Show active connections"Jan Kiszka1-4/+0
This reverts commit 1c6ed9f3379faac83da0ed3e95cbd49003ac0dd1. It's redundant to slirp statistics, which are going to be split up / reworked later on. Conflicts: monitor.c net.c Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-09slirp: Reorder initializationJan Kiszka1-1/+1
This patch reorders the initialization of slirp itself as well as its associated features smb and redirection. So far the first reference to slirp triggered the initialization, independent of the actual -net user option which may carry additional parameters. Now we save any request to add a smb export or some redirections until the actual initialization of the stack. This also allows to move a few parameters that were passed via global variable into the argument list of net_slirp_init. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-05-28User networking: Show active connectionsAlexander Graf1-0/+4
In case you're wondering what connections exactly you have open or maybe redir'ed in the past, you can't really find out from qemu right now. This patch enables you to see all current connections the host only networking holds open, so you can kill them using the previous patch. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-27User Networking: Enable removal of redirectionsAlexander Graf1-0/+1
Using the new host_net_redir command you can easily create redirections on the fly while your VM is running. While that's great, it's missing the removal of redirections, in case you want to have a port closed again at a later point in time. This patch adds support for removal of redirections. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-04-18Move bootp_filename to avoid a sparse warningblueswir11-0/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7174 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07Sparse fixes: NULL use, header order, ANSI prototypes, staticblueswir11-1/+1
Fix Sparse warnings: * use NULL instead of plain 0 * rearrange header include order to avoid redefining types accidentally * ANSIfy SLIRP * avoid "restrict" keyword * add static git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6736 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08Add slirp_restrict option (Gleb Natapov)aliguori1-1/+1
Add "slirp firewall" to permit connection only to vmchannel addresses. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6241 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08Redirect slirp traffic to/from qemu character device (Gleb Natapov)aliguori1-1/+4
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6240 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-26Make Slirp statistics gathering and output conditional to LOG_ENABLEDblueswir11-0/+2
Add 'info slirp' command to monitor to display statistics Disable Slirp debugging code by default git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3451 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16find -type f | xargs sed -i 's/[\t ]$//g' # on most filesths1-3/+3
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-13Move network related includes to vl.c to help SLIRP-less builds.ths1-8/+0
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3167 c046a42c-6fe2-441c-8c8c-71466251a162
2006-04-30removed warningsbellard1-1/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1871 c046a42c-6fe2-441c-8c8c-71466251a162
2006-04-16Set slirp client hostname.pbrook1-0/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1813 c046a42c-6fe2-441c-8c8c-71466251a162
2005-06-0564 bit fixes (initial patch by Gwenole Beauchesne)bellard1-0/+8
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1458 c046a42c-6fe2-441c-8c8c-71466251a162
2004-09-05allow inetd like program execbellard1-0/+2
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1060 c046a42c-6fe2-441c-8c8c-71466251a162
2004-08-25port redirection supportbellard1-0/+7
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1054 c046a42c-6fe2-441c-8c8c-71466251a162
2004-07-12win32 compilebellard1-0/+4
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1016 c046a42c-6fe2-441c-8c8c-71466251a162
2004-04-22initial user mode network supportbellard1-0/+19
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@733 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.1 at 2024-12-27 11:33:18 +0000