aboutsummaryrefslogtreecommitdiff
path: root/scsi
AgeCommit message (Collapse)AuthorFilesLines
2019-12-17build: rename CONFIG_LIBCAP to CONFIG_LIBCAP_NGPaolo Bonzini1-6/+6
Since we are actually testing for the newer capng library, rename the symbol to match. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-03qemu-pr-helper: fix crash in mpath_reconstruct_senseMaxim Levitsky1-3/+3
The 'r' variable was accidently shadowed, and because of this we were always passing 0 to mpath_generic_sense, instead of original return value, which triggers an abort() This is an attempt to fix the https://bugzilla.redhat.com/show_bug.cgi?id=1720047 although there might be other places in the code that trigger qemu-pr-helper crash, and this fix might not be the root cause. The crash was reproduced by creating an iscsi target on a test machine, and passing it twice to the guest like that: -blockdev node-name=idisk0,driver=iscsi,transport=...,target=... -device scsi-block,drive=idisk0,bus=scsi0.0,bootindex=-1,scsi-id=1,lun=0,share-rw=on -device scsi-block,drive=idisk0,bus=scsi0.0,bootindex=-1,scsi-id=1,lun=1,share-rw=on Then in the guest, both /dev/sda and /dev/sdb were aggregated by multipath to /dev/mpatha, which was passed to a nested guest like that -object pr-manager-helper,id=qemu_pr_helper,path=/root/work/vm/testvm/.run/pr_helper.socket -blockdev node-name=test,driver=host_device,filename=/dev/mapper/mpatha,pr-manager=qemu_pr_helper -device scsi-block,drive=test,bus=scsi0.0,bootindex=-1,scsi-id=0,lun=0 The nested guest run: sg_persist --no-inquiry -v --out --register --param-sark 0x1234 /dev/sda Strictly speaking this is wrong configuration since qemu is where the multipath was split, and thus the iscsi target was not aware of multipath, and thus when libmpathpersist code rightfully tried to register the PR key on all paths, it failed to do so. However qemu-pr-helper should not crash in this case. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-10pr-manager: Fix invalid g_free() crash bugMarkus Armbruster1-1/+0
pr_manager_worker() passes its @opaque argument to g_free(). Wrong; it points to pr_manager_worker()'s automatic @data. Broken when commit 2f3a7ab39be converted @data from heap- to stack-allocated. Fix by deleting the g_free(). Fixes: 2f3a7ab39bec4ba8022dc4d42ea641165b004e3e Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-09-03socket: Add num connections to qio_channel_socket_sync()Juan Quintela1-1/+2
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-07-15iscsi: base all handling of check condition on scsi_sense_to_errnoPaolo Bonzini1-3/+2
Now that scsi-disk is not using scsi_sense_to_errno to separate guest-recoverable sense codes, we can modify it to simplify iscsi's own sense handling. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15scsi: add guest-recoverable ZBC errorsPaolo Bonzini1-0/+5
When running basic operations on zoned storage from the guest via scsi-block, the following ASCs are reported for write or read commands due to unexpected zone status or write pointer status: 21h 04h: UNALIGNED WRITE COMMAND 21h 05h: WRITE BOUNDARY VIOLATION 21h 06h: ATTEMPT TO READ INVALID DATA 55h 0Eh: INSUFFICIENT ZONE RESOURCES Reporting these ASCs to the guest, the user applications can handle them to manage zone/write pointer status, or help the user application developers to understand the failure reason and fix bugs. Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15scsi: explicitly list guest-recoverable sense codesPaolo Bonzini1-0/+43
It's not really possible to fit all sense codes into errno codes, especially in such a way that sense codes can be properly categorized as either guest-recoverable or host-handled. Create a new function that checks for guest recoverable sense, then scsi_sense_buf_to_errno only needs to be called for host handled sense codes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster1-0/+1
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster3-1/+3
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-05-13Normalize header guard symbol definition.Markus Armbruster1-1/+2
We commonly define the header guard symbol without an explicit value. Normalize the exceptions. Done with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-8-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-04-17log: Make glib logging go through QEMUChristophe Fergeau1-0/+1
This commit adds a error_init() helper which calls g_log_set_default_handler() so that glib logs (g_log, g_warning, ...) are handled similarly to other QEMU logs. This means they will get a timestamp if timestamps are enabled, and they will go through the HMP monitor if one is configured. This commit also adds a call to error_init() to the binaries installed by QEMU. Since error_init() also calls error_set_progname(), this means that *-linux-user, *-bsd-user and qemu-pr-helper messages output with error_report, info_report, ... will slightly change: they will be prefixed by the binary name. glib debug messages are enabled through G_MESSAGES_DEBUG similarly to the glib default log handler. At the moment, this change will mostly impact SPICE logging if your spice version is >= 0.14.1. With older spice versions, this is not going to work as expected, but will not have any ill effect, so this call is not conditional on the SPICE version. Signed-off-by: Christophe Fergeau <cfergeau@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190131164614.19209-3-cfergeau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster1-1/+1
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22trace-events: Consistently point to docs/devel/tracing.txtMarkus Armbruster1-0/+2
Almost all trace-events point to docs/devel/tracing.txt in a comment right at the beginning. Touch up the ones that don't. [Updated with Markus' new commit description wording. --Stefan] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-2-armbru@redhat.com Message-Id: <20190314180929.27722-2-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-12-14file-posix: Switch to .bdrv_co_ioctlKevin Wolf2-13/+10
No real reason to keep using the callback based mechanism here when the rest of the file-posix driver is coroutine based. Changing it brings ioctls more in line with how other request types work. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-27scsi: Address spurious clang warningJohn Snow1-1/+1
Some versions of Clang prior to 6.0 (and some builds of clang after, such as 6.0.1-2.fc28) fail to recognize { 0 } as a valid initializer for a struct with subobjects when -Wmissing-braces is enabled. https://bugs.llvm.org/show_bug.cgi?id=21689 and https://reviews.llvm.org/rL314499 suggests this should be fixed in 6.0, but it might not be the case for older versions or downstream versions. For now, follow the precedent of ebf2a499 and replace the standard { 0 } with the accepted { } to silence this warning and allow the build to work under clang 6.0.1-2.fc28, and builds prior to 6.0. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20181127184929.20065-1-jsnow@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-02util: add qemu_write_pidfile()Marc-André Lureau1-35/+5
There are variants of qemu_create_pidfile() in qemu-pr-helper and qemu-ga. Let's have a common implementation in libqemuutil. The code is initially based from pr-helper write_pidfile(), with various improvements and suggestions from Daniel Berrangé: QEMU will leave the pidfile existing on disk when it exits which initially made me think it avoids the deletion race. The app managing QEMU, however, may well delete the pidfile after it has seen QEMU exit, and even if the app locks the pidfile before deleting it, there is still a race. eg consider the following sequence QEMU 1 libvirtd QEMU 2 1. lock(pidfile) 2. exit() 3. open(pidfile) 4. lock(pidfile) 5. open(pidfile) 6. unlink(pidfile) 7. close(pidfile) 8. lock(pidfile) IOW, at step 8 the new QEMU has successfully acquired the lock, but the pidfile no longer exists on disk because it was deleted after the original QEMU exited. While we could just say no external app should ever delete the pidfile, I don't think that is satisfactory as people don't read docs, and admins don't like stale pidfiles being left around on disk. To make this robust, I think we might want to copy libvirt's approach to pidfile acquisition which runs in a loop and checks that the file on disk /after/ acquiring the lock matches the file that was locked. Then we could in fact safely let QEMU delete its own pidfiles on clean exit.. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180831145314.14736-2-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-28qapi: Drop qapi_event_send_FOO()'s Error ** argumentPeter Xu1-2/+1
The generated qapi_event_send_FOO() take an Error ** argument. They can't actually fail, because all they do with the argument is passing it to functions that can't fail: the QObject output visitor, and the @qmp_emit callback, which is either monitor_qapi_event_queue() or event_test_emit(). Drop the argument, and pass &error_abort to the QObject output visitor and @qmp_emit instead. Suggested-by: Eric Blake <eblake@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180815133747.25032-4-peterx@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message rewritten, update to qapi-code-gen.txt corrected] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-23qemu-pr-helper: Fix build on CentOS 7Murilo Opsfelder Araujo1-0/+4
After commit b3f1c8c413bc83e4a2cc7a63e4eddf9fe6449052 "qemu-pr-helper: use new libmultipath API", QEMU started using new libmultipath API, which is not available on CentOS 7.x. This fixes that by probing the new libmultipath API in configure. If it fails, then try probing the old API. If it fails, then consider libmultipath not available. With this, configure script defines CONFIG_MPATH_NEW_API that is used in scsi/qemu-pr-helper.c to use the new libmultipath API. Fixes: b3f1c8c413bc83e4a2cc7a63e4eddf9fe6449052 BugLink: https://bugs.launchpad.net/qemu/+bug/1786343 Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com> Message-Id: <20180810141116.24016-1-muriloo@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-06pr-manager-helper: fix memory leak on eventPaolo Bonzini1-0/+1
Reported by Coverity. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-06pr-helper: Rework socket path handlingMichal Privoznik1-26/+10
When reviewing Paolo's pr-helper patches I've noticed couple of problems: 1) socket_path needs to be calculated at two different places (one for printing out help, the other if socket activation is NOT used), 2) even though the default socket_path is allocated in compute_default_paths() it is the only default path the function handles. For instance, pidfile is allocated outside of this function. And yet again, at different places than 1) Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Message-Id: <c791ba035f26ea957e8f3602e3009b621769b1ba.1530611283.git.mprivozn@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-06pr-helper: avoid error on PR IN command with zero request sizePaolo Bonzini1-33/+30
After reading a PR IN command with zero request size in prh_read_request, the resp->result field will be uninitialized and the resp.sz field will be also uninitialized when returning to prh_co_entry. If resp->result == GOOD (from a previous successful reply or just luck), then the assert in prh_write_response might not be triggered and uninitialized response will be sent. The fix is to remove the whole handling of sz == 0 in prh_co_entry. Those errors apply only to PR OUT commands and it's perfectly okay to catch them later in do_pr_out and multipath_pr_out; the check for too-short parameters in fact doesn't apply in the easy SG_IO case, as it can be left to the target firmware even. The result is that prh_read_request does not fail requests anymore and prh_co_entry becomes simpler. Reported-by: Dima Stepanov <dimastep@yandex-team.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pr-manager-helper: report event on connection/disconnectionPaolo Bonzini1-0/+14
Let management know if there were any problems communicating with qemu-pr-helper. The event is edge-triggered, and is sent every time the connection status of the pr-manager-helper object changes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pr-manager: add query-pr-managers QMP commandPaolo Bonzini3-0/+64
This command lets you query the connection status of each pr-manager-helper object. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pr-manager: put stubs in .c filePaolo Bonzini2-0/+25
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pr-manager-helper: avoid SIGSEGV when writing to the socket failPaolo Bonzini1-0/+1
When writing to the qemu-pr-helper socket failed, the persistent reservation manager was correctly disconnecting the socket, but it did not clear pr_mgr->ioc. So the rest of the code did not know that the socket had been disconnected, accessed pr_mgr->ioc and happily caused a crash. To reproduce, it is enough to stop qemu-pr-helper between QEMU startup and executing e.g. sg_persist -k /dev/sdb. Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pr-helper: fix assertion failure on failed multipath PERSISTENT RESERVE INPaolo Bonzini1-1/+5
The response size is expected to be zero if the SCSI status is not "GOOD", but nothing was resetting it. This can be reproduced simply by "sg_persist -s /dev/sdb" where /dev/sdb in the guest is a scsi-block device corresponding to a multipath device on the host. Before: PR in (Read full status): Aborted command and on the host: prh_write_response: Assertion `resp->sz == 0' failed. After: PR in (Read full status): bad field in cdb or parameter list (perhaps unsupported service action) Reported-by: Jiri Belka <jbelka@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-28pr-helper: fix --socket-path default in helpPaolo Bonzini1-7/+8
Currently --help shows "(default '(null)')" for the -k/--socket-path option. Fix it by getting the default path in /var/run. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-04-09qemu-pr-helper: Write pidfile more oftenMichal Privoznik1-1/+5
Let's write pidfile even if user did not request --daemon but they requested just --pidfile. Libvirt will use exactly this. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-04-09qemu-pr-helper: Daemonize before dropping privilegesMichal Privoznik1-7/+7
After we've dropped privileges it might be not possible to write pidfile. For instance, if this binary is run as root (because user wants it to write pidfile to some privileged location) writing pidfile fails because privileges are dropped before we even get to that. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-26qemu-pr-helper: Actually allow users to specify pidfileMichal Privoznik1-3/+4
Due to wrong specification of arguments to getopt_long() any attempt to set pidfile resulted in: 1) the default to be leaked 2) the @pidfile variable to be set to NULL (because optarg is NULL without this patch). Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Message-Id: <6f10cd53d361a395aa0e85a9311ec4e9a8fc11e5.1521868451.git.mprivozn@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12Polish the version strings containing the package versionThomas Huth1-1/+1
Since commit 67a1de0d195a there is no space anymore between the version number and the parentheses when running configure with --with-pkgversion=foo : $ qemu-system-s390x --version QEMU emulator version 2.11.50(foo) But the space is included when building without that option when building from a git checkout: $ qemu-system-s390x --version QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty) The same confusion exists with the "query-version" QMP command. Let's fix this by introducing a proper QEMU_FULL_VERSION definition that includes the space and parentheses, while the QEMU_PKGVERSION should just cleanly contain the package version string itself. Note that this also changes the behavior of the "query-version" QMP command (the space and parentheses are not included there anymore), but that's supposed to be OK since the strings there are not meant to be parsed by other tools. Fixes: 67a1de0d195a6185c39b436159c9ffc7720bf979 Buglink: https://bugs.launchpad.net/qemu/+bug/1673373 Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-09Clean up includesMarkus Armbruster1-2/+0
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes, with the change to target/s390x/gen-features.c manually reverted, and blank lines around deletions collapsed. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-3-armbru@redhat.com>
2018-01-12scsi: fix scsi_convert_sense crash when in_buf == NULL && in_len == 0Paolo Bonzini1-6/+6
scsi_disk_emulate_command passes in_buf == NULL when sent a REQUEST SENSE command. Check for in_len == 0 before dereferencing in_buf. Fixes: f68d98b21fa74155dc7c1fd212474379ac3c7531 Reported-by: Roman Kagan <rkagan@virtuozzo.com> Tested-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21scsi: replace hex constants with #definesPaolo Bonzini1-7/+7
Sense keys have nice #defines in scsi/constants.h, use them. Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21scsi: provide general-purpose functions to manage sense dataPaolo Bonzini1-72/+67
Extract the common parts of scsi_sense_buf_to_errno, scsi_convert_sense and scsi_target_send_command's REQUEST SENSE handling into two new functions scsi_parse_sense_buf and scsi_build_sense_buf. Fix a bug in scsi_target_send_command along the way; the length was written in buf[10] rather than buf[7]. Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixes: b07fbce634 ("scsi-bus: correct responses for INQUIRY and REQUEST SENSE") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-20qemu-pr-helper: miscellaneous fixesPaolo Bonzini2-4/+36
1) Return a generic sense if TEST UNIT READY does not provide one; 2) Fix two mistakes in copying from the spec. Cc: qemu-stable@nongnu.org Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-10-18qemu-pr-helper: use new libmultipath APIPaolo Bonzini1-3/+14
libmultipath has recently changed its API. The new API supports multi-threaded clients better. Unfortunately there is no backwards-compatibility, so we just switch to the new one. Running QEMU compiled with the new library on the old library will likely crash, while doing the opposite will cause QEMU not to start at all (because udev, get_multipath_config and put_multipath_config are undefined). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22scsi: add persistent reservation manager using qemu-pr-helperPaolo Bonzini2-1/+303
This adds a concrete subclass of pr-manager that talks to qemu-pr-helper. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22scsi: add multipath support to qemu-pr-helperPaolo Bonzini2-3/+353
Proper support of persistent reservation for multipath devices requires communication with the multipath daemon, so that the reservation is registered and applied when a path comes up. The device mapper utilities provide a library to do so; this patch makes qemu-pr-helper.c detect multipath devices and, when one is found, delegate the operation to libmpathpersist. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22scsi: build qemu-pr-helperPaolo Bonzini2-0/+776
Introduce a privileged helper to run persistent reservation commands. This lets virtual machines send persistent reservations without using CAP_SYS_RAWIO or out-of-tree patches. The helper uses Unix permissions and SCM_RIGHTS to restrict access to processes that can access its socket and prove that they have an open file descriptor for a raw SCSI device. The next patch will also correct the usage of persistent reservations with multipath devices. It would also be possible to support for Linux's IOC_PR_* ioctls in the future, to support NVMe devices. For now, however, only SCSI is supported. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22scsi, file-posix: add support for persistent reservation managementPaolo Bonzini3-0/+114
It is a common requirement for virtual machine to send persistent reservations, but this currently requires either running QEMU with CAP_SYS_RAWIO, or using out-of-tree patches that let an unprivileged QEMU bypass Linux's filter on SG_IO commands. As an alternative mechanism, the next patches will introduce a privileged helper to run persistent reservation commands without expanding QEMU's attack surface unnecessarily. The helper is invoked through a "pr-manager" QOM object, to which file-posix.c passes SG_IO requests for PERSISTENT RESERVE OUT and PERSISTENT RESERVE IN commands. For example: $ qemu-system-x86_64 -device virtio-scsi \ -object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock -drive if=none,id=hd,driver=raw,file.filename=/dev/sdb,file.pr-manager=helper0 -device scsi-block,drive=hd or: $ qemu-system-x86_64 -device virtio-scsi \ -object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock -blockdev node-name=hd,driver=raw,file.driver=host_device,file.filename=/dev/sdb,file.pr-manager=helper0 -device scsi-block,drive=hd Multiple pr-manager implementations are conceivable and possible, though only one is implemented right now. For example, a pr-manager could: - talk directly to the multipath daemon from a privileged QEMU (i.e. QEMU links to libmpathpersist); this makes reservation work properly with multipath, but still requires CAP_SYS_RAWIO - use the Linux IOC_PR_* ioctls (they require CAP_SYS_ADMIN though) - more interestingly, implement reservations directly in QEMU through file system locks or a shared database (e.g. sqlite) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: move block/scsi.h to include/scsi/constants.hPaolo Bonzini1-1/+1
Complete the transition by renaming this header, which was shared by block/iscsi.c and the SCSI emulation code. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: introduce sg_io_sense_from_errnoPaolo Bonzini1-0/+35
Move more knowledge of SG_IO out of hw/scsi/scsi-generic.c, for reusability. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: introduce scsi_build_sensePaolo Bonzini1-0/+11
Move more knowledge of sense data format out of hw/scsi/scsi-bus.c for reusability. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: move non-emulation specific code to scsi/Paolo Bonzini2-0/+493
util/scsi.c includes some SCSI code that is shared by block/iscsi.c and hw/scsi, but the introduction of the persistent reservation helper will add many more instances of this. There is also include/block/scsi.h, which actually is not part of the core block layer. The persistent reservation manager will also need a home. A scsi/ directory provides one for both the aforementioned shared code and the PR manager code. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-12-27 08:49:59 +0000