aboutsummaryrefslogtreecommitdiff
path: root/scsi
AgeCommit message (Collapse)AuthorFilesLines
2018-06-28pr-manager-helper: report event on connection/disconnectionPaolo Bonzini1-0/+14
Let management know if there were any problems communicating with qemu-pr-helper. The event is edge-triggered, and is sent every time the connection status of the pr-manager-helper object changes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pr-manager: add query-pr-managers QMP commandPaolo Bonzini3-0/+64
This command lets you query the connection status of each pr-manager-helper object. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pr-manager: put stubs in .c filePaolo Bonzini2-0/+25
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pr-manager-helper: avoid SIGSEGV when writing to the socket failPaolo Bonzini1-0/+1
When writing to the qemu-pr-helper socket failed, the persistent reservation manager was correctly disconnecting the socket, but it did not clear pr_mgr->ioc. So the rest of the code did not know that the socket had been disconnected, accessed pr_mgr->ioc and happily caused a crash. To reproduce, it is enough to stop qemu-pr-helper between QEMU startup and executing e.g. sg_persist -k /dev/sdb. Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pr-helper: fix assertion failure on failed multipath PERSISTENT RESERVE INPaolo Bonzini1-1/+5
The response size is expected to be zero if the SCSI status is not "GOOD", but nothing was resetting it. This can be reproduced simply by "sg_persist -s /dev/sdb" where /dev/sdb in the guest is a scsi-block device corresponding to a multipath device on the host. Before: PR in (Read full status): Aborted command and on the host: prh_write_response: Assertion `resp->sz == 0' failed. After: PR in (Read full status): bad field in cdb or parameter list (perhaps unsupported service action) Reported-by: Jiri Belka <jbelka@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-28pr-helper: fix --socket-path default in helpPaolo Bonzini1-7/+8
Currently --help shows "(default '(null)')" for the -k/--socket-path option. Fix it by getting the default path in /var/run. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-04-09qemu-pr-helper: Write pidfile more oftenMichal Privoznik1-1/+5
Let's write pidfile even if user did not request --daemon but they requested just --pidfile. Libvirt will use exactly this. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-04-09qemu-pr-helper: Daemonize before dropping privilegesMichal Privoznik1-7/+7
After we've dropped privileges it might be not possible to write pidfile. For instance, if this binary is run as root (because user wants it to write pidfile to some privileged location) writing pidfile fails because privileges are dropped before we even get to that. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-26qemu-pr-helper: Actually allow users to specify pidfileMichal Privoznik1-3/+4
Due to wrong specification of arguments to getopt_long() any attempt to set pidfile resulted in: 1) the default to be leaked 2) the @pidfile variable to be set to NULL (because optarg is NULL without this patch). Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Message-Id: <6f10cd53d361a395aa0e85a9311ec4e9a8fc11e5.1521868451.git.mprivozn@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12Polish the version strings containing the package versionThomas Huth1-1/+1
Since commit 67a1de0d195a there is no space anymore between the version number and the parentheses when running configure with --with-pkgversion=foo : $ qemu-system-s390x --version QEMU emulator version 2.11.50(foo) But the space is included when building without that option when building from a git checkout: $ qemu-system-s390x --version QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty) The same confusion exists with the "query-version" QMP command. Let's fix this by introducing a proper QEMU_FULL_VERSION definition that includes the space and parentheses, while the QEMU_PKGVERSION should just cleanly contain the package version string itself. Note that this also changes the behavior of the "query-version" QMP command (the space and parentheses are not included there anymore), but that's supposed to be OK since the strings there are not meant to be parsed by other tools. Fixes: 67a1de0d195a6185c39b436159c9ffc7720bf979 Buglink: https://bugs.launchpad.net/qemu/+bug/1673373 Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-09Clean up includesMarkus Armbruster1-2/+0
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes, with the change to target/s390x/gen-features.c manually reverted, and blank lines around deletions collapsed. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-3-armbru@redhat.com>
2018-01-12scsi: fix scsi_convert_sense crash when in_buf == NULL && in_len == 0Paolo Bonzini1-6/+6
scsi_disk_emulate_command passes in_buf == NULL when sent a REQUEST SENSE command. Check for in_len == 0 before dereferencing in_buf. Fixes: f68d98b21fa74155dc7c1fd212474379ac3c7531 Reported-by: Roman Kagan <rkagan@virtuozzo.com> Tested-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21scsi: replace hex constants with #definesPaolo Bonzini1-7/+7
Sense keys have nice #defines in scsi/constants.h, use them. Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21scsi: provide general-purpose functions to manage sense dataPaolo Bonzini1-72/+67
Extract the common parts of scsi_sense_buf_to_errno, scsi_convert_sense and scsi_target_send_command's REQUEST SENSE handling into two new functions scsi_parse_sense_buf and scsi_build_sense_buf. Fix a bug in scsi_target_send_command along the way; the length was written in buf[10] rather than buf[7]. Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixes: b07fbce634 ("scsi-bus: correct responses for INQUIRY and REQUEST SENSE") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-20qemu-pr-helper: miscellaneous fixesPaolo Bonzini2-4/+36
1) Return a generic sense if TEST UNIT READY does not provide one; 2) Fix two mistakes in copying from the spec. Cc: qemu-stable@nongnu.org Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-10-18qemu-pr-helper: use new libmultipath APIPaolo Bonzini1-3/+14
libmultipath has recently changed its API. The new API supports multi-threaded clients better. Unfortunately there is no backwards-compatibility, so we just switch to the new one. Running QEMU compiled with the new library on the old library will likely crash, while doing the opposite will cause QEMU not to start at all (because udev, get_multipath_config and put_multipath_config are undefined). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22scsi: add persistent reservation manager using qemu-pr-helperPaolo Bonzini2-1/+303
This adds a concrete subclass of pr-manager that talks to qemu-pr-helper. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22scsi: add multipath support to qemu-pr-helperPaolo Bonzini2-3/+353
Proper support of persistent reservation for multipath devices requires communication with the multipath daemon, so that the reservation is registered and applied when a path comes up. The device mapper utilities provide a library to do so; this patch makes qemu-pr-helper.c detect multipath devices and, when one is found, delegate the operation to libmpathpersist. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22scsi: build qemu-pr-helperPaolo Bonzini2-0/+776
Introduce a privileged helper to run persistent reservation commands. This lets virtual machines send persistent reservations without using CAP_SYS_RAWIO or out-of-tree patches. The helper uses Unix permissions and SCM_RIGHTS to restrict access to processes that can access its socket and prove that they have an open file descriptor for a raw SCSI device. The next patch will also correct the usage of persistent reservations with multipath devices. It would also be possible to support for Linux's IOC_PR_* ioctls in the future, to support NVMe devices. For now, however, only SCSI is supported. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22scsi, file-posix: add support for persistent reservation managementPaolo Bonzini3-0/+114
It is a common requirement for virtual machine to send persistent reservations, but this currently requires either running QEMU with CAP_SYS_RAWIO, or using out-of-tree patches that let an unprivileged QEMU bypass Linux's filter on SG_IO commands. As an alternative mechanism, the next patches will introduce a privileged helper to run persistent reservation commands without expanding QEMU's attack surface unnecessarily. The helper is invoked through a "pr-manager" QOM object, to which file-posix.c passes SG_IO requests for PERSISTENT RESERVE OUT and PERSISTENT RESERVE IN commands. For example: $ qemu-system-x86_64 -device virtio-scsi \ -object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock -drive if=none,id=hd,driver=raw,file.filename=/dev/sdb,file.pr-manager=helper0 -device scsi-block,drive=hd or: $ qemu-system-x86_64 -device virtio-scsi \ -object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock -blockdev node-name=hd,driver=raw,file.driver=host_device,file.filename=/dev/sdb,file.pr-manager=helper0 -device scsi-block,drive=hd Multiple pr-manager implementations are conceivable and possible, though only one is implemented right now. For example, a pr-manager could: - talk directly to the multipath daemon from a privileged QEMU (i.e. QEMU links to libmpathpersist); this makes reservation work properly with multipath, but still requires CAP_SYS_RAWIO - use the Linux IOC_PR_* ioctls (they require CAP_SYS_ADMIN though) - more interestingly, implement reservations directly in QEMU through file system locks or a shared database (e.g. sqlite) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: move block/scsi.h to include/scsi/constants.hPaolo Bonzini1-1/+1
Complete the transition by renaming this header, which was shared by block/iscsi.c and the SCSI emulation code. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: introduce sg_io_sense_from_errnoPaolo Bonzini1-0/+35
Move more knowledge of SG_IO out of hw/scsi/scsi-generic.c, for reusability. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: introduce scsi_build_sensePaolo Bonzini1-0/+11
Move more knowledge of sense data format out of hw/scsi/scsi-bus.c for reusability. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: move non-emulation specific code to scsi/Paolo Bonzini2-0/+493
util/scsi.c includes some SCSI code that is shared by block/iscsi.c and hw/scsi, but the introduction of the persistent reservation helper will add many more instances of this. There is also include/block/scsi.h, which actually is not part of the core block layer. The persistent reservation manager will also need a home. A scsi/ directory provides one for both the aforementioned shared code and the PR manager code. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-12-27 12:35:17 +0000