aboutsummaryrefslogtreecommitdiff
path: root/scsi
AgeCommit message (Collapse)AuthorFilesLines
2021-08-26error: Use error_fatal to simplify obvious fatal errors (again)Markus Armbruster1-8/+3
We did this with scripts/coccinelle/use-error_fatal.cocci before, in commit 50beeb68094 and 007b06578ab. This commit cleans up rarer variations that don't seem worth matching with Coccinelle. Cc: Thomas Huth <thuth@redhat.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Juan Quintela <quintela@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210720125408.387910-2-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella1-1/+1
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-03-16scsi: fix sense code for EREMOTEIOPaolo Bonzini1-2/+2
SENSE_CODE(LUN_COMM_FAILURE) has an ABORTED COMMAND sense key, so it results in a retry in Linux. To ensure that EREMOTEIO is forwarded to the guest, use a HARDWARE ERROR sense key instead. Note that the code before commit d7a84021d was incorrect because it used HARDWARE_ERROR as a SCSI status, not as a sense key. Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06scsi: inline sg_io_sense_from_errno() into the callers.Hannes Reinecke2-30/+17
Currently sg_io_sense_from_errno() converts the two input parameters 'errno' and 'io_hdr' into sense code and SCSI status. Having split the function off into scsi_sense_from_errno() and scsi_sense_from_host_status(), both of which are available generically, we now inline the logic in the callers so that scsi-disk and scsi-generic will be able to pass host_status to the HBA. Signed-off-by: Hannes Reinecke <hare@suse.de> Message-Id: <20201116184041.60465-7-hare@suse.de> [Put together from "scsi-disk: Add sg_io callback to evaluate status" and what remains of "scsi: split sg_io_sense_from_errno() in two functions", with many other fixes. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06scsi: Add mapping for generic SCSI_HOST status to sense codesHannes Reinecke1-7/+58
As we don't have a driver-specific mapping (yet) we should provide for a detailed mapping from host_status to SCSI sense codes. Signed-off-by: Hannes Reinecke <hare@suse.de> Message-Id: <20201116184041.60465-6-hare@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06scsi: Rename linux-specific SG_ERR codes to generic SCSI_HOST error codesHannes Reinecke1-3/+3
We really should make a distinction between legitimate sense codes (ie if one is running against an emulated block device or for pass-through sense codes), and the intermediate errors generated during processing of the command, which really are not sense codes but refer to some specific internal status. And this internal state is not necessarily linux-specific, but rather can refer to the qemu implementation itself. So rename the linux-only SG_ERR codes to SCSI_HOST codes and make them available generally. Signed-off-by: Hannes Reinecke <hare@suse.de> Message-Id: <20201116184041.60465-5-hare@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-25scsi: introduce scsi_sense_from_errno()Paolo Bonzini1-10/+41
The new function is an extension of the switch statement in scsi-disk.c which also includes the errno cases only found in sg_io_sense_from_errno. This allows us to consolidate the errno handling. Extracted from a patch by Hannes Reinecke <hare@suse.de>. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-28qapi: Use QAPI_LIST_APPEND in trivial casesEric Blake1-8/+2
The easiest spots to use QAPI_LIST_APPEND are where we already have an obvious pointer to the tail of a list. While at it, consistently use the variable name 'tail' for that purpose. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210113221013.390592-5-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-01-22scsi/utils: Add INVALID_PARAM_VALUE sense code definitionPhilippe Mathieu-Daudé1-0/+5
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210120153522.1173897-3-philmd@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-11-11trace: remove argument from trace_init_filePaolo Bonzini1-4/+2
It is not needed, all the callers are just saving what was retrieved from -trace and trace_init_file can retrieve it on its own. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20201102115841.4017692-1-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-09-23qemu/atomic.h: rename atomic_ to qatomic_Stefan Hajnoczi1-2/+2
clang's C11 atomic_fetch_*() functions only take a C11 atomic type pointer argument. QEMU uses direct types (int, etc) and this causes a compiler error when a QEMU code calls these functions in a source file that also included <stdatomic.h> via a system header file: $ CC=clang CXX=clang++ ./configure ... && make ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid) Avoid using atomic_*() names in QEMU's atomic.h since that namespace is used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h and <stdatomic.h> can co-exist. I checked /usr/include on my machine and searched GitHub for existing "qatomic_" users but there seem to be none. This patch was generated using: $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \ sort -u >/tmp/changed_identifiers $ for identifier in $(</tmp/changed_identifiers); do sed -i "s%\<$identifier\>%q$identifier%g" \ $(git grep -I -l "\<$identifier\>") done I manually fixed line-wrap issues and misaligned rST tables. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-09-22Merge remote-tracking branch ↵Peter Maydell1-1/+1
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging Pull request trivial patches 20200919 # gpg: Signature made Sat 19 Sep 2020 19:43:35 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: contrib/: fix some comment spelling errors qapi/: fix some comment spelling errors disas/: fix some comment spelling errors linux-user/: fix some comment spelling errors util/: fix some comment spelling errors scripts/: fix some comment spelling errors docs/: fix some comment spelling errors migration/: fix some comment spelling errors qemu/: fix some comment spelling errors scripts/git.orderfile: Display meson files along with buildsys ones hw/timer/hpet: Fix debug format strings hw/timer/hpet: Remove unused functions hpet_ram_readb, hpet_ram_readw meson: remove empty else and duplicated gio deps manual: escape backslashes in "parsed-literal" blocks ui/spice-input: Remove superfluous forward declaration hw/ppc/ppc4xx_pci: Replace magic value by the PCI_NUM_PINS definition hw/gpio/max7310: Remove impossible check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost1-3/+1
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-17qemu/: fix some comment spelling errorszhaolichang1-1/+1
I found that there are many spelling errors in the comments of qemu, so I used the spellcheck tool to check the spelling errors and finally found some spelling errors in the folder. Signed-off-by: zhaolichang <zhaolichang@huawei.com> Reviewed-by: Alex Bennee <alex.bennee@linaro.org> Message-Id: <20200917075029.313-2-zhaolichang@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost1-3/+2
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost1-2/+4
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-01scsi: Remove superfluous breaksLiao Pingfang1-4/+0
Remove superfluous breaks, as there is a "return" before them. Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1594631062-36341-1-git-send-email-wang.yi59@zte.com.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-21meson: convert blockMarc-André Lureau2-4/+4
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini1-0/+1
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-21qom: Change object_get_canonical_path_component() not to mallocMarkus Armbruster2-3/+2
object_get_canonical_path_component() returns a malloced copy of a property name on success, null on failure. 19 of its 25 callers immediately free the returned copy. Change object_get_canonical_path_component() to return the property name directly. Since modifying the name would be wrong, adjust the return type to const char *. Drop the free from the 19 callers become simpler, add the g_strdup() to the other six. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200714160202.3121879-4-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com>
2020-05-27error: Use error_reportf_err() where appropriateMarkus Armbruster1-2/+2
Replace error_report("...: %s", ..., error_get_pretty(err)); by error_reportf_err(err, "...: ", ...); One of the replaced messages lacked a colon. Add it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200505101908.6207-6-armbru@redhat.com>
2020-05-15qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster1-2/+1
The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-03-16scsi/qemu-pr-helper: Fix out-of-bounds access to trnptid_list[]Christophe de Dinechin1-7/+10
Compile error reported by gcc 10.0.1: scsi/qemu-pr-helper.c: In function ‘multipath_pr_out’: scsi/qemu-pr-helper.c:523:32: error: array subscript <unknown> is outside array bounds of ‘struct transportid *[0]’ [-Werror=array-bounds] 523 | paramp.trnptid_list[paramp.num_transportid++] = id; | ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from scsi/qemu-pr-helper.c:36: /usr/include/mpath_persist.h:168:22: note: while referencing ‘trnptid_list’ 168 | struct transportid *trnptid_list[]; | ^~~~~~~~~~~~ scsi/qemu-pr-helper.c:424:35: note: defined here ‘paramp’ 424 | struct prout_param_descriptor paramp; | ^~~~~~ This highlights an actual implementation issue in function multipath_pr_out. The variable paramp is declared with type `struct prout_param_descriptor`, which is a struct terminated by an empty array in mpath_persist.h: struct transportid *trnptid_list[]; That empty array was filled with code that looked like that: trnptid_list[paramp.descr.num_transportid++] = id; This is an actual out-of-bounds access. The fix is to malloc `paramp`. Signed-off-by: Christophe de Dinechin <dinechin@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17build: rename CONFIG_LIBCAP to CONFIG_LIBCAP_NGPaolo Bonzini1-6/+6
Since we are actually testing for the newer capng library, rename the symbol to match. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-03qemu-pr-helper: fix crash in mpath_reconstruct_senseMaxim Levitsky1-3/+3
The 'r' variable was accidently shadowed, and because of this we were always passing 0 to mpath_generic_sense, instead of original return value, which triggers an abort() This is an attempt to fix the https://bugzilla.redhat.com/show_bug.cgi?id=1720047 although there might be other places in the code that trigger qemu-pr-helper crash, and this fix might not be the root cause. The crash was reproduced by creating an iscsi target on a test machine, and passing it twice to the guest like that: -blockdev node-name=idisk0,driver=iscsi,transport=...,target=... -device scsi-block,drive=idisk0,bus=scsi0.0,bootindex=-1,scsi-id=1,lun=0,share-rw=on -device scsi-block,drive=idisk0,bus=scsi0.0,bootindex=-1,scsi-id=1,lun=1,share-rw=on Then in the guest, both /dev/sda and /dev/sdb were aggregated by multipath to /dev/mpatha, which was passed to a nested guest like that -object pr-manager-helper,id=qemu_pr_helper,path=/root/work/vm/testvm/.run/pr_helper.socket -blockdev node-name=test,driver=host_device,filename=/dev/mapper/mpatha,pr-manager=qemu_pr_helper -device scsi-block,drive=test,bus=scsi0.0,bootindex=-1,scsi-id=0,lun=0 The nested guest run: sg_persist --no-inquiry -v --out --register --param-sark 0x1234 /dev/sda Strictly speaking this is wrong configuration since qemu is where the multipath was split, and thus the iscsi target was not aware of multipath, and thus when libmpathpersist code rightfully tried to register the PR key on all paths, it failed to do so. However qemu-pr-helper should not crash in this case. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-10pr-manager: Fix invalid g_free() crash bugMarkus Armbruster1-1/+0
pr_manager_worker() passes its @opaque argument to g_free(). Wrong; it points to pr_manager_worker()'s automatic @data. Broken when commit 2f3a7ab39be converted @data from heap- to stack-allocated. Fix by deleting the g_free(). Fixes: 2f3a7ab39bec4ba8022dc4d42ea641165b004e3e Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-09-03socket: Add num connections to qio_channel_socket_sync()Juan Quintela1-1/+2
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-07-15iscsi: base all handling of check condition on scsi_sense_to_errnoPaolo Bonzini1-3/+2
Now that scsi-disk is not using scsi_sense_to_errno to separate guest-recoverable sense codes, we can modify it to simplify iscsi's own sense handling. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15scsi: add guest-recoverable ZBC errorsPaolo Bonzini1-0/+5
When running basic operations on zoned storage from the guest via scsi-block, the following ASCs are reported for write or read commands due to unexpected zone status or write pointer status: 21h 04h: UNALIGNED WRITE COMMAND 21h 05h: WRITE BOUNDARY VIOLATION 21h 06h: ATTEMPT TO READ INVALID DATA 55h 0Eh: INSUFFICIENT ZONE RESOURCES Reporting these ASCs to the guest, the user applications can handle them to manage zone/write pointer status, or help the user application developers to understand the failure reason and fix bugs. Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-15scsi: explicitly list guest-recoverable sense codesPaolo Bonzini1-0/+43
It's not really possible to fit all sense codes into errno codes, especially in such a way that sense codes can be properly categorized as either guest-recoverable or host-handled. Create a new function that checks for guest recoverable sense, then scsi_sense_buf_to_errno only needs to be called for host handled sense codes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster1-0/+1
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster3-1/+3
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-05-13Normalize header guard symbol definition.Markus Armbruster1-1/+2
We commonly define the header guard symbol without an explicit value. Normalize the exceptions. Done with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-8-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-04-17log: Make glib logging go through QEMUChristophe Fergeau1-0/+1
This commit adds a error_init() helper which calls g_log_set_default_handler() so that glib logs (g_log, g_warning, ...) are handled similarly to other QEMU logs. This means they will get a timestamp if timestamps are enabled, and they will go through the HMP monitor if one is configured. This commit also adds a call to error_init() to the binaries installed by QEMU. Since error_init() also calls error_set_progname(), this means that *-linux-user, *-bsd-user and qemu-pr-helper messages output with error_report, info_report, ... will slightly change: they will be prefixed by the binary name. glib debug messages are enabled through G_MESSAGES_DEBUG similarly to the glib default log handler. At the moment, this change will mostly impact SPICE logging if your spice version is >= 0.14.1. With older spice versions, this is not going to work as expected, but will not have any ill effect, so this call is not conditional on the SPICE version. Signed-off-by: Christophe Fergeau <cfergeau@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190131164614.19209-3-cfergeau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster1-1/+1
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22trace-events: Consistently point to docs/devel/tracing.txtMarkus Armbruster1-0/+2
Almost all trace-events point to docs/devel/tracing.txt in a comment right at the beginning. Touch up the ones that don't. [Updated with Markus' new commit description wording. --Stefan] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-2-armbru@redhat.com Message-Id: <20190314180929.27722-2-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-12-14file-posix: Switch to .bdrv_co_ioctlKevin Wolf2-13/+10
No real reason to keep using the callback based mechanism here when the rest of the file-posix driver is coroutine based. Changing it brings ioctls more in line with how other request types work. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-27scsi: Address spurious clang warningJohn Snow1-1/+1
Some versions of Clang prior to 6.0 (and some builds of clang after, such as 6.0.1-2.fc28) fail to recognize { 0 } as a valid initializer for a struct with subobjects when -Wmissing-braces is enabled. https://bugs.llvm.org/show_bug.cgi?id=21689 and https://reviews.llvm.org/rL314499 suggests this should be fixed in 6.0, but it might not be the case for older versions or downstream versions. For now, follow the precedent of ebf2a499 and replace the standard { 0 } with the accepted { } to silence this warning and allow the build to work under clang 6.0.1-2.fc28, and builds prior to 6.0. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20181127184929.20065-1-jsnow@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-02util: add qemu_write_pidfile()Marc-André Lureau1-35/+5
There are variants of qemu_create_pidfile() in qemu-pr-helper and qemu-ga. Let's have a common implementation in libqemuutil. The code is initially based from pr-helper write_pidfile(), with various improvements and suggestions from Daniel Berrangé: QEMU will leave the pidfile existing on disk when it exits which initially made me think it avoids the deletion race. The app managing QEMU, however, may well delete the pidfile after it has seen QEMU exit, and even if the app locks the pidfile before deleting it, there is still a race. eg consider the following sequence QEMU 1 libvirtd QEMU 2 1. lock(pidfile) 2. exit() 3. open(pidfile) 4. lock(pidfile) 5. open(pidfile) 6. unlink(pidfile) 7. close(pidfile) 8. lock(pidfile) IOW, at step 8 the new QEMU has successfully acquired the lock, but the pidfile no longer exists on disk because it was deleted after the original QEMU exited. While we could just say no external app should ever delete the pidfile, I don't think that is satisfactory as people don't read docs, and admins don't like stale pidfiles being left around on disk. To make this robust, I think we might want to copy libvirt's approach to pidfile acquisition which runs in a loop and checks that the file on disk /after/ acquiring the lock matches the file that was locked. Then we could in fact safely let QEMU delete its own pidfiles on clean exit.. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180831145314.14736-2-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-28qapi: Drop qapi_event_send_FOO()'s Error ** argumentPeter Xu1-2/+1
The generated qapi_event_send_FOO() take an Error ** argument. They can't actually fail, because all they do with the argument is passing it to functions that can't fail: the QObject output visitor, and the @qmp_emit callback, which is either monitor_qapi_event_queue() or event_test_emit(). Drop the argument, and pass &error_abort to the QObject output visitor and @qmp_emit instead. Suggested-by: Eric Blake <eblake@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180815133747.25032-4-peterx@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message rewritten, update to qapi-code-gen.txt corrected] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-23qemu-pr-helper: Fix build on CentOS 7Murilo Opsfelder Araujo1-0/+4
After commit b3f1c8c413bc83e4a2cc7a63e4eddf9fe6449052 "qemu-pr-helper: use new libmultipath API", QEMU started using new libmultipath API, which is not available on CentOS 7.x. This fixes that by probing the new libmultipath API in configure. If it fails, then try probing the old API. If it fails, then consider libmultipath not available. With this, configure script defines CONFIG_MPATH_NEW_API that is used in scsi/qemu-pr-helper.c to use the new libmultipath API. Fixes: b3f1c8c413bc83e4a2cc7a63e4eddf9fe6449052 BugLink: https://bugs.launchpad.net/qemu/+bug/1786343 Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com> Message-Id: <20180810141116.24016-1-muriloo@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-06pr-manager-helper: fix memory leak on eventPaolo Bonzini1-0/+1
Reported by Coverity. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-06pr-helper: Rework socket path handlingMichal Privoznik1-26/+10
When reviewing Paolo's pr-helper patches I've noticed couple of problems: 1) socket_path needs to be calculated at two different places (one for printing out help, the other if socket activation is NOT used), 2) even though the default socket_path is allocated in compute_default_paths() it is the only default path the function handles. For instance, pidfile is allocated outside of this function. And yet again, at different places than 1) Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Message-Id: <c791ba035f26ea957e8f3602e3009b621769b1ba.1530611283.git.mprivozn@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-06pr-helper: avoid error on PR IN command with zero request sizePaolo Bonzini1-33/+30
After reading a PR IN command with zero request size in prh_read_request, the resp->result field will be uninitialized and the resp.sz field will be also uninitialized when returning to prh_co_entry. If resp->result == GOOD (from a previous successful reply or just luck), then the assert in prh_write_response might not be triggered and uninitialized response will be sent. The fix is to remove the whole handling of sz == 0 in prh_co_entry. Those errors apply only to PR OUT commands and it's perfectly okay to catch them later in do_pr_out and multipath_pr_out; the check for too-short parameters in fact doesn't apply in the easy SG_IO case, as it can be left to the target firmware even. The result is that prh_read_request does not fail requests anymore and prh_co_entry becomes simpler. Reported-by: Dima Stepanov <dimastep@yandex-team.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pr-manager-helper: report event on connection/disconnectionPaolo Bonzini1-0/+14
Let management know if there were any problems communicating with qemu-pr-helper. The event is edge-triggered, and is sent every time the connection status of the pr-manager-helper object changes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pr-manager: add query-pr-managers QMP commandPaolo Bonzini3-0/+64
This command lets you query the connection status of each pr-manager-helper object. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pr-manager: put stubs in .c filePaolo Bonzini2-0/+25
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pr-manager-helper: avoid SIGSEGV when writing to the socket failPaolo Bonzini1-0/+1
When writing to the qemu-pr-helper socket failed, the persistent reservation manager was correctly disconnecting the socket, but it did not clear pr_mgr->ioc. So the rest of the code did not know that the socket had been disconnected, accessed pr_mgr->ioc and happily caused a crash. To reproduce, it is enough to stop qemu-pr-helper between QEMU startup and executing e.g. sg_persist -k /dev/sdb. Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28pr-helper: fix assertion failure on failed multipath PERSISTENT RESERVE INPaolo Bonzini1-1/+5
The response size is expected to be zero if the SCSI status is not "GOOD", but nothing was resetting it. This can be reproduced simply by "sg_persist -s /dev/sdb" where /dev/sdb in the guest is a scsi-block device corresponding to a multipath device on the host. Before: PR in (Read full status): Aborted command and on the host: prh_write_response: Assertion `resp->sz == 0' failed. After: PR in (Read full status): bad field in cdb or parameter list (perhaps unsupported service action) Reported-by: Jiri Belka <jbelka@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-28pr-helper: fix --socket-path default in helpPaolo Bonzini1-7/+8
Currently --help shows "(default '(null)')" for the -k/--socket-path option. Fix it by getting the default path in /var/run. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
generated by cgit v1.1 at 2024-11-17 02:34:10 +0000