aboutsummaryrefslogtreecommitdiff
path: root/savevm.c
AgeCommit message (Collapse)AuthorFilesLines
2013-04-17qemu-file: do not use stdio for qemu_fdopenPaolo Bonzini1-11/+90
This uses system calls directly for Unix file descriptors, so that the efficient writev_buffer can be used. Pay attention to the possibility of partial writes in writev. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wassermann <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-17qemu-file: drop socket_put_bufferPaolo Bonzini1-13/+0
It is enough to implement one of socket_writev_buffer and socket_put_buffer. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wassermann <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori1-4/+21
* stefanha/block: rbd: add an asynchronous flush iotests: Add 'check -ssh' option to test Secure Shell block device. block: ssh: Use libssh2_sftp_fsync (if supported by libssh2) to flush to disk. block: Add support for Secure Shell (ssh) block device. ide: refuse WIN_READ_NATIVE_MAX on empty device qemu-iotests: filter QEMU_PROG in 051.out qemu-iotests: Add test for -drive options qemu-iotests: A few more bdrv_pread/pwrite tests block: Introduce bdrv_pwritev() for qcow2_save_vmstate savevm: Implement block_writev_buffer() block: Introduce bdrv_writev_vmstate Conflicts: savevm.c aliguori: add f->pos parameter to writev_buffer(). Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-15savevm: Implement block_writev_buffer()Kevin Wolf1-4/+21
Instead of breaking up RAM state into many small chunks, pass the iovec to the block layer for better performance. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-09migration: simplify writev vs. non-writev logicPaolo Bonzini1-13/+9
Check f->iovcnt in add_to_iovec, f->buf_index in qemu_put_buffer/byte. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-04-09migration: drop is_write complicationsPaolo Bonzini1-48/+20
The same QEMUFile is never used for both read and write. Simplify the logic to simply look for presence or absence of the right ops. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-04-09migration: use a single I/O operation when writev_buffer is not definedPaolo Bonzini1-15/+34
The recent patches to use vectored I/O for RAM migration caused a regression in savevm speed. To restore previous performance, add data to the buffer in qemu_put_buffer_async whenever writev_buffer is not available in the QEMUFile. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-04-09migration: set f->is_write and flush in add_to_iovecPaolo Bonzini1-16/+9
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-04-02oslib-posix: rename socket_set_nonblock() to qemu_set_nonblock()Stefan Hajnoczi1-1/+1
The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets. Rename to qemu_set_nonblock() just like qemu_set_cloexec(). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-26Add qemu_put_buffer_asyncOrit Wasserman1-8/+26
This allows us to add a buffer to the iovec to send without copying it into the static buffer, the buffer will be sent later when qemu_fflush is called. Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26Use writev ops if availableOrit Wasserman1-8/+23
Update qemu_fflush and stdio_close to use writev ops if they are available Use the buffers stored in the iovec. Signed-off-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26Store the data to send also in iovecOrit Wasserman1-2/+22
All data is still copied into the static buffer. Adjacent iovecs are coalesced so we send one big buffer instead of many small buffers. Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26Update bytes_xfer in qemu_put_byteOrit Wasserman1-0/+2
Signed-off-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26Add socket_writev_buffer functionOrit Wasserman1-0/+15
Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26savevm: Add VMSTATE_FLOAT64 helpersDavid Gibson1-0/+23
The current savevm code includes VMSTATE helpers for a number of commonly used data types, but not for the float64 type used by the internal floating point emulation code. This patch fixes the deficiency. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26savevm: Add VMSTATE_UINT64_EQUAL helpersDavid Gibson1-0/+21
The savevm code already includes a number of *_EQUAL helpers which act as sanity checks verifying that the configuration of the saved state matches that of the machine we're loading into to work. Variants already exist for 8 bit 16 bit and 32 bit integers, but not 64 bit integers. This patch fills that hole, adding a UINT64 version. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-12vmstate: Make vmstate_register() static inlineAndreas Färber1-7/+0
This avoids adding a duplicate stub for CONFIG_USER_ONLY. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-11migration: move rate limiting to QEMUFilePaolo Bonzini1-14/+17
Rate limiting is now simply a byte counter; client call qemu_file_rate_limit() manually to determine if they have to exit. So it is possible and simple to move the functionality to QEMUFile. This makes the remaining functionality of s->file redundant; in the next patch we can remove it and write directly to s->migration_file. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: use QEMUFile for migration channel lifetimePaolo Bonzini1-0/+1
As a start, use QEMUFile to store the destination and close it. qemu_get_fd gets a file descriptor that will be used by the write callbacks. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11qemu-file: simplify and export qemu_ftellPaolo Bonzini1-12/+8
Force a flush when qemu_ftell is called. This simplifies the buffer magic (it also breaks qemu_ftell for input QEMUFiles, but we never use it). Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11qemu-file: add writable socket QEMUFilePaolo Bonzini1-2/+31
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11qemu-file: check exit status when closing a pipe QEMUFilePaolo Bonzini1-0/+3
This is what exec_close does. Move this to the underlying QEMUFile. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11qemu-file: fsync a writable stdio QEMUFilePaolo Bonzini1-0/+18
This is what fd_close does. Prepare for switching to a QEMUFile. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: merge qemu_popen_cmd with qemu_popenPaolo Bonzini1-14/+8
There is no reason for outgoing exec migration to do popen manually anymore (the reason used to be that we needed the FILE* to make it non-blocking). Use qemu_popen_cmd. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11qemu-file: make qemu_fflush and qemu_file_set_error private againPaolo Bonzini1-2/+2
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: yay, buffering is gonePaolo Bonzini1-0/+1
Buffering was needed because blocking writes could take a long time and starve other threads seeking to grab the big QEMU mutex. Now that all writes (except within _complete callbacks) are done outside the big QEMU mutex, we do not need buffering at all. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: run setup callbacks out of big lockPaolo Bonzini1-0/+3
Only the migration_bitmap_sync() call needs the iothread lock. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11qemu-file: temporarily expose qemu_file_set_error and qemu_fflushPaolo Bonzini1-2/+2
Right now, migration cannot entirely rely on QEMUFile's automatic drop of I/O after an error, because it does its "real" I/O outside the put_buffer callback. To fix this until buffering is gone, expose qemu_file_set_error which we will use in buffered_flush. Similarly, buffered_flush is not a complete flush because some data may still reside in the QEMUFile's own buffer. This somewhat complicates the process of closing the migration thread. Again, when buffering is gone buffered_flush will disappear and calling qemu_fflush will not be needed; in the meanwhile, we expose the function for use in migration.c. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: use qemu_file_set_error to pass error codes back to qemu_savevm_statePaolo Bonzini1-26/+18
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11qemu-file: pass errno from qemu_fflush via f->last_errorPaolo Bonzini1-13/+12
This is done by almost all callers of qemu_fflush, move the code directly to qemu_fflush. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: push qemu_savevm_state_cancel out of qemu_savevm_state_*Paolo Bonzini1-11/+4
This is useful, because it lets us keep the cancellation callbacks inside the big lock while pushing the others out. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-02-12migration: make qemu_ftell() public and support writable filesStefan Hajnoczi1-2/+7
Migration .save_live_iterate() functions return the number of bytes transferred. The easiest way of doing this is by calling qemu_ftell(f) at the beginning and end of the function to calculate the difference. Make qemu_ftell() public so that block-migration will be able to use it. Also adjust the ftell calculation for writable files where buf_offset does not include buf_size. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-id: 1360661835-28663-2-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-11migration: restrict scope of incoming fd read handlerStefan Hajnoczi1-4/+30
The incoming migration is processed in a coroutine and uses an fd read handler to enter the yielded coroutine when data becomes available. The read handler was set too broadly, so that spurious coroutine entries were be triggered if other coroutine users yielded (like the block layer's bdrv_write() function). Install the fd read only only when yielding for more data to become available. This prevents spurious coroutine entries which break code that assumes only a specific set of places can re-enter the coroutine. This patch fixes crashes in block/raw-posix.c that are triggered with "migrate -b" when qiov becomes a dangling pointer due to a spurious coroutine entry that frees qiov early. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1360598505-5512-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: introduce qemu_get_queue()Jason Wang1-1/+1
To support multiqueue, the patch introduce a helper qemu_get_queue() which is used to get the NetClientState of a device. The following patches would refactor this helper to support multiqueue. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01Move XBZRLE encoding code to a separate file to allow testingOrit Wasserman1-159/+0
Signed-off-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-01-21Merge remote-tracking branch 'quintela/thread.next' into stagingAnthony Liguori1-5/+7
# By Juan Quintela (7) and Paolo Bonzini (6) # Via Juan Quintela * quintela/thread.next: migration: remove argument to qemu_savevm_state_cancel migration: Only go to the iterate stage if there is anything to send migration: unfold rest of migrate_fd_put_ready() into thread migration: move exit condition to migration thread migration: Add buffered_flush error handling migration: move beginning stage to the migration thread qemu-file: Only set last_error if it is not already set migration: fix off-by-one in buffered_rate_limit migration: remove double call to migrate_fd_close migration: make function static use XFER_LIMIT_RATIO consistently Protect migration_bitmap_sync() with the ramlist lock Unlock ramlist lock also in error case
2013-01-17migration: remove argument to qemu_savevm_state_cancelJuan Quintela1-4/+4
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-17qemu-file: Only set last_error if it is not already setJuan Quintela1-1/+3
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-17HMP: add QDict to info callback handlerWenchao Xia1-1/+1
This patch change all info call back function to take additional QDict * parameter, which allow those command take parameter. Now it is set to NULL at default case. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-11savevm: Remove MinGW specific code which is no longer neededStefan Weil1-28/+2
QEMU provides a portable function qemu_gettimeofday instead of gettimeofday and also an implementation of localtime_r for MinGW. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02savevm.c: cleanup system includesMichael Tokarev1-39/+1
savevm.c suffers from the same problem as some other files. Some years ago savevm.c was created from vl.c, moving some code from there into a separate file. At that time, all includes were just copied from vl.c to savevm.c, without checking which ones are needed and which are not. But actually most of that stuff is _not_ needed. More, some stuff is wrong, for example, *BSD #ifdef'ery around <util.h> vs <libutil.h> - for one, it fails to build on Debian/kFreebsd. Just remove all this. Maybe there's a possibility to clean it up further - like removing <windows.h> (and maybe including winsock.h for htons etc), and maybe it's possible to remove some internal #includes too, but I didn't check this. While at it, remove duplicate #include of qemu/timer.h. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-20savevm: New save live migration method: pendingJuan Quintela1-0/+19
Code just now does (simplified for clarity) if (qemu_savevm_state_iterate(s->file) == 1) { vm_stop_force_state(RUN_STATE_FINISH_MIGRATE); qemu_savevm_state_complete(s->file); } Problem here is that qemu_savevm_state_iterate() returns 1 when it knows that remaining memory to sent takes less than max downtime. But this means that we could end spending 2x max_downtime, one downtime in qemu_savevm_iterate, and the other in qemu_savevm_state_complete. Changed code to: pending_size = qemu_savevm_state_pending(s->file, max_size); DPRINTF("pending size %lu max %lu\n", pending_size, max_size); if (pending_size >= max_size) { ret = qemu_savevm_state_iterate(s->file); } else { vm_stop_force_state(RUN_STATE_FINISH_MIGRATE); qemu_savevm_state_complete(s->file); } So what we do is: at current network speed, we calculate the maximum number of bytes we can sent: max_size. Then we ask every save_live section how much they have pending. If they are less than max_size, we move to complete phase, otherwise we do an iterate one. This makes things much simpler, because now individual sections don't have to caluclate the bandwidth (it was implossible to do right from there). Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-20migration: make writes blockingJuan Quintela1-5/+0
Move all the writes to the migration_thread, and make writings blocking. Notice that are still using the iothread for everything that we do. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-5/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19migration: move include files to include/migration/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19monitor: move include files to include/monitor/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19exec: move include files to include/exec/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19net: reorganize headersPaolo Bonzini1-1/+1
Move public headers to include/net, and leave private headers in net/. Put the virtio headers in include/net/tap.h, removing the multiple copies that existed. Leave include/net/tap.h as the interface for NICs, and net/tap_int.h as the interface for OS-specific parts of the tap backend. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19janitor: do not include qemu-char everywherePaolo Bonzini1-1/+0
Touching char/char.h basically causes the whole of QEMU to be rebuilt. Avoid this, it is usually unnecessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-11-19 11:33:08 +0000