aboutsummaryrefslogtreecommitdiff
path: root/rules.mak
AgeCommit message (Collapse)AuthorFilesLines
2017-06-15docs: create interop/ subdirectoryPaolo Bonzini1-1/+1
This is for the future interoperability & management guide. It includes the QAPI docs, including the automatically generated ones, other socket protocols (vhost-user, VNC), and the qcow2 file format. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-07configure: split c and cxx extra flagsBruno Dominguez1-3/+0
There was no possibility to add specific cxx flags using the configure file. So A new entrance has been created to support it. Duplication of information in configure and rules.mak. Taking QEMU_CFLAGS and add them to QEMU_CXXFLAGS, now the value of QEMU_CXXFLAGS is stored in config-host.mak, so there is no need for it. The makefile for libvixl was adding flags for QEMU_CXXFLAGS in QEMU_CFLAGS because of the addition in rules.mak. That was removed, so adding them where it should be. Signed-off-by: Bruno Dominguez <bru.dominguez@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1496754467-20893-1-git-send-email-bru.dominguez@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-03-16qapi: Clean up build of generated documentationMarkus Armbruster1-1/+1
Rename intermediate qemu-qapi.texi to qemu-qmp-qapi.texi to match its user qemu-qmp-ref.texi, just like qemu-ga-qapi.texi matches qemu-ga-ref.texi. Build the intermediate .texi next to the sources and the final output in docs/ instead of dumping them into the build root. Fix version.texi dependencies so that only the targets that actually need it depend on it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1489582656-31133-8-git-send-email-armbru@redhat.com>
2017-02-07rules: don't try to create missing include dirsDaniel P. Berrange1-1/+0
In commit ba78db44f6532d66a1e704bd44613e841baa2fc5 Author: Daniel P. Berrange <berrange@redhat.com> Date: Wed Jan 25 16:14:10 2017 +0000 make: move top level dir to end of include search path The dir $(BUILD_DIR)/$(@D) was added to the include path. This would sometimes point to a non-existant directory, if the sub-dir in question did not contain any target-independant files (eg tcg/). To deal with this the rules.mak attempted to create the directory. While this was succesful, it also caused accidental creation of files in the parent of the build dir. e.g. when building common source files into target specific output files. Rather than trying to workaround this, just revert the code that attempted to mkdir the missing include directories. Instead just turn off the compiler warning in question as the missing dir is expected & harmless in general. NB: you can clean up a build directory parent that has been filled with empty directories by commit ba78db44f653 using this GNU find command in that parent directory: find audio backends block chardev crypto disas fsdev hw io linux-user \ migration nbd net qapi qom replay slirp target ui util \ -type d -empty -delete Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Tested-by: Alberto Garcia <berto@igalia.com> [PMM: added note about how to clean up a polluted directory] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-31make: move top level dir to end of include search pathDaniel P. Berrange1-7/+23
Currently the search path is 1. source dir corresponding to input file (implicit by compiler) 2. top level build dir 3. top level source dir 4. top level source include/ dir 5. source dir corresponding to input file 6. build dir corresponding to output file Search item 5 is an effective no-op, since it duplicates item 1. When srcdir == builddir, item 6 also duplicates item 1, which causes a semantic difference between VPATH and non-VPATH builds. Thus to ensure consistent semantics we need item 6 to be present immediately after item 1. e.g. 1. source dir corresponding to input file (implicit by compiler) 2. build dir corresponding to output file 3. top level build dir 4. top level source dir 5. top level source include/ dir When srcdir == builddir, items 1 & 2 collapse into one, and items 3 & 4 collapse into one, but the overall search order is still consistent with srcdir != builddir A further complication is that while most of the source files are built with a current directory of $BUILD_DIR, target dependant files are built with a current directory of $BUILD_DIR/$TARGET. As a result, search item 2 resolves to a different location for target independant vs target dependant files. For example when building 'migration/ram.o', the use of '-I$(@D)' (which expands to '-Imigration') would not find '$BUILD_DIR/migration', but rather '$BUILD_DIR/$TARGET/migration'. If there are generated headers files to be used by the migration code in '$BUILD_DIR/migration', these will not be found by the relative include, an absolute include is needed instead. This has not been a problem so far, since nothing has been generating headers in sub-dirs, but the trace code will shortly be doing that. So it is needed to list '-I$(BUILD_DIR)/$(@D)' as well as '-I$(@D)' to ensure both directories are searched when building target dependant code. So the search order ends up being: 1. source dir corresponding to input file (implicit by compiler) 2. build dir corresponding to output file (absolute) 3. build dir corresponding to output file (relative to cwd) 4. top level build dir 5. top level source dir 6. top level source include/ dir One final complication is that the absolute '-I$(BUILD_DIR)/$(@D)' will sometimes end up pointing to a non-existant directory if that sub-dir does not have any target-independant files to be built. Rather than try to dynamically filter this, a simple 'mkdir' ensures $(BUILD_DIR)/$(@D) is guaranteed to exist at all times. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170125161417.31949-2-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-16build-sys: add qapi doc generation targetsMarc-André Lureau1-0/+2
Generate and install the man, txt and html versions of QAPI documentation (generate and install qemu-doc.txt too). Add it also to optional pdf/info targets. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170113144135.5150-22-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-01-16build-sys: use a generic TEXI2MAN ruleMarc-André Lureau1-0/+10
The recipe for making a man page from .texi is duplicated several times over. Capture it in suitable pattern rules instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170113144135.5150-20-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-12-22rules.mak: add more rules to avoid chainingPaolo Bonzini1-0/+4
Really rule chaining is not a particularly expensive task, since GNU Make caches the directory listing. However it is easy to avoid it for most files and for phony targets (one was missing). After this patch, only "Makefile", "scripts/hxtool" and "scripts/create_config" attempt to use chained rules. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-22rules.mak: speedup save-vars load-varsPaolo Bonzini1-12/+10
Unnesting variables spends a lot of time parsing and executing foreach and if functions. Because actually very few variables have to be saved and restored, a good strategy is to remember what has to be done in load-vars, and only iterate the right variables in load-vars. For save-vars, unroll the foreach loop to provide another small improvement. This speeds up a "noop" build from around 15.5 seconds on my laptop to 11.7 (25% roughly). Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-29rules.mak: Also try -r to build modulesPaolo Bonzini1-1/+1
Building qemu fails in distributions where gcc enables PIE by default (e.g. Debian unstable) with: /usr/bin/ld: -r and -pie may not be used together You have to use -r instead of -Wl,-r to avoid gcc passing -pie to the linker when PIE is enabled and a relocatable object is passed. However, clang does not know about -r, so try -Wl,-r first. [This is a fix for commit c96f0ee6a67ca6277366e78ce5d84d5c20dd596f ("rules.mak: Use -r instead of -Wl, -r to fix building when PIE is default") which mostly worked but broke the ./configure --enable-modules build with clang. --Stefan] Reported-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161129153720.29747-1-pbonzini@redhat.com Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-28rules.mak: Use -r instead of -Wl, -r to fix building when PIE is defaultAdrian Bunk1-1/+1
Building qemu fails in distributions where gcc enables PIE by default (e.g. Debian unstable) with: /usr/bin/ld: -r and -pie may not be used together Use -r instead of -Wl,-r to avoid gcc passing -pie to the linker when PIE is enabled and a relocatable object is passed. Signed-off-by: Adrian Bunk <bunk@stusta.de> Message-Id: <20161127162817.15144-1-bunk@stusta.de> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-08build-sys: fix find-in-pathMarc-André Lureau1-1/+1
Fix spelling, the GNU make text functions is not called "find-string" but "findstring". Broken in commit 2b2e59e. Fairly harmless: its only use is in tests/tcg/Makefile, where the bug can cause the I386_TESTS not to run when they should. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-06rules.mak: quiet-command: Split command name and args to printPeter Maydell1-13/+19
The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-09-13rules.mak: Don't extract libs from .mo-libs in link commandFam Zheng1-1/+1
For module build, .mo objects are passed to LINK and consumed in process-archive-undefs. The reason behind that is documented in the comment above process-archive-undefs. Similarly, extract-libs should be called with .mo filtered out too. Otherwise, the .mo-libs are added to the link command incorrectly, spoiling the purpose of modularization. Currently we don't have any .mo-libs usage, but it will be used soon when we modularize more multi-source objects, like sdl and gtk. Reported-by: Colin Lord <clord@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <1469600777-30413-2-git-send-email-famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-06s390x/cpumodel: generate CPU feature lists for CPU modelsMichael Mueller1-0/+1
This patch introduces the helper "gen-features" which allows to generate feature list definitions at compile time. Its flexibility is better and the error-proneness is lower when compared to static programming time added statements. The helper includes "target-s390x/cpu_features.h" to be able to use named facility bits instead of numbers. The generated defines will be used for the definition of CPU models. We generate feature lists for each HW generation and GA for EC models. BC models are always based on a EC version and have no separate definitions. Base features: Features we expect to be always available in sane setups. Migration safe - will never change. Can be seen as "minimum features required for a CPU model". Default features: Features we expect to be stable and around in latest setups (e.g. having KVM support) - not migration safe. Max features: All supported features that are theoretically allowed for a CPU model. Exceeding these features could otherwise produce problems with IBC (instruction blocking controls) in KVM. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> [generate base, default and models. renaming and cleanup] Message-Id: <20160905085244.99980-6-dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-07-29optionrom: fix detection of -Wa,-32Paolo Bonzini1-0/+2
The cc-option macro runs $(CC) in -S mode (generate assembly) to avoid a pointless run of the assembler. However, this does not work when you want to detect support for cc->as option passthrough. clang ignores -Wa unless -c is provided, and exits successfully even if the -Wa,-32 option is not supported. Reported-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1469043409-14033-1-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-10build: Use $(AS) for optionrom explicitlyRichard Henderson1-1/+1
For clang before 3.5, -fno-integrated-as does not exist, so the workaround in 5f6f0e27fb24 fails to build. Use clang's default assembler for linux-user/safe-syscall.S, and explicitly change to use the system assembler for the option roms. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-07-05build: Use $(CCAS) for compiling .S filesRichard Henderson1-5/+2
We fail to pass to $(AS) all of the different flags that may be required for a given set of CFLAGS. Rather than figuring out the host-specific mapping, it's better to allow the compiler driver to do that. However, simply using $(CC) runs afoul of clang trying to build the option roms. C.f. 3dd46c78525a30e98c68, wherein we changed from using $(CC) to using $(AS) in the first place. Work around this by passing -fno-integrated-as to clang, so that we use the external assembler, and the clang driver still passes along all of the options that the assembler might require. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1466703558-7723-1-git-send-email-rth@twiddle.net>
2016-06-08Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+1
* max-ram-below-4g improvement (Gerd) * escc fix (xiaoqiang) * ESP fix (Prasad) * scsi-disk tweaks/fix (me) * Makefile dependency fixes (me) * PKGVERSION improvement (Fam) * -vnc man improvement (Robert) # gpg: Signature made Tue 07 Jun 2016 18:06:22 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: vnc: list the 'to' parameter of '-vnc' in the qemu man page scsi-disk: add missing break Makefile: Derive "PKGVERSION" from "git describe" by default Makefile: add dependency on scripts/hxtool Makefile: add dependency on scripts/make_device_config.sh Makefile: add dependency on scripts/create_config Makefile: Add a "FORCE" target scsi: megasas: null terminate bios version buffer scsi: mark TYPE_SCSI_DISK_BASE as abstract scsi: esp: check TI buffer index before read/write hw/char: QOM'ify escc.c (fix) pc: allow raising low memory via max-ram-below-4g option tests: Rename tests/Makefile to tests/Makefile.include Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-07Fix linking relocatable objects on SparcJames Clarke1-1/+1
On Sparc, gcc implicitly passes --relax to the linker, but -r is incompatible with this. Therefore, if --no-relax is supported, it should be passed to the linker. Signed-off-by: James Clarke <jrtc27@jrtc27.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-07Makefile: add dependency on scripts/create_configPaolo Bonzini1-1/+1
Make sure that config-host.h and config-target.h are rebuilt whenever there is a change in the scripts that generates them; add the dependency to the pattern rule as suggested by Peter. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-01rules.mak: Add "COMMA" constantFam Zheng1-0/+2
Using "," literal in $(call quiet-command, ...) arguments is awkward. Add this constant to make it at least doable. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1464755128-32490-3-git-send-email-famz@redhat.com
2016-02-17rules: filter out irrelevant filesMichael S. Tsirkin1-1/+1
It's often handy to make executables depend on each other, e.g. make a test depend on a helper. This doesn't work now, as linker will attempt to use the helper as an object. To fix, filter only relevant file types before linking an executable. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-11remove libtool supportMichael Tokarev1-18/+0
Libtool support was needed to build shared library for libcacard. Now there's no need to use libtool, and since the build system is already complicated enough, we have a way to slightly de-complicate it. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
2015-08-13make: load only required dependency files.Victor Kaplansky1-1/+1
The old rules.mak loads dependency .d files using include directive with file glob pattern "*.d". This breaks the build when build tree has left-over *.d files from another build. This patch fixes this by - loading precise list of .d files made from *.o and *.mo. - specifying explicit list of required dependency info files for *.hex autogenerated sources. Note that Makefile still includes some .d in root directory by including "*.d". Signed-off-by: Victor Kaplansky <victork@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13make: fix where dependency *.d are stored.Victor Kaplansky1-1/+1
In rules like "bar/%.o: %.c" there is a difference between $(*D) and $(@D). $(*D) expands to '.', while $(@D) expands to 'bar'. It is cleaner to generate *.d in the same directory where appropriate *.o resides. This allows precise including of dependency info from .d files. As a hack, we also touch two sources for generated *.hex files. Without this hack, anyone doing "git pull; make" will not get *.hex rebuilt correctly since the dependency file would be missing. Signed-off-by: Victor Kaplansky <victork@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-08rules.mak: Force CFLAGS for all objects in DSOFam Zheng1-1/+3
Because of the trick of process-archive-undefs, all .mo objects, even with --enable-modules, are dependencies of executables. This breaks CFLAGS propogation because the compiling of module object will happen too early before building for DSO. With GCC 5, the linking would fail because .o doesn't have -fPIC. Also, BUILD_DSO will be missed. (module-common.o will have it, so the stamp symbol was still liked in .so). Fix the problem by forcing the CFLAGS on individual .o-cflags during unnest-vars. Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Fam Zheng <famz@redhat.com> Cc: qemu-stable@nongnu.org # 2.3 Message-Id: <1430981715-31465-1-git-send-email-famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-14rules.mak: Fix module buildFam Zheng1-11/+12
Module build is broken since commit c261d774fb ( rules.mak: Fix DSO build by pulling in archive symbols). That commit added .mo placeholders of DSO to -y variables, in order to pull stub symbols to executable. But the placeholders are unintentionally expanded in -y, rather than filtered out while linking. Fix it by moving the -objs expanding to before inserting .mo placeholders. Note that passing -cflags and -libs to member objects are also moved to keep it happening before object expanding. Reported-by: Bharata B Rao <bharata.rao@gmail.com> Tested-by: Bharata B Rao <bharata.rao@gmail.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31rules.mak: Allow .mo-objs and .mo-cflags in -y variablesFam Zheng1-0/+5
Expand %.mo-objs in -y nested objects, so that we can write combined object -cflags rules like what will be done in the coming patch. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-19Fix cross compilation (nm command)Stefan Weil1-1/+1
Commit c261d774fb9093d00e0938a19f502fb220f62718 added one more binutils tool: nm also needs a cross prefix. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1411070108-8954-1-git-send-email-sw@weilnetz.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-09rules.mak: Fix DSO build by pulling in archive symbolsFam Zheng1-3/+40
This fixes an issue with module build system. block/iscsi.so is currently broken: $ ~/build/last/qemu-img Failed to open module: /home/fam/build/master/block-iscsi.so: undefined symbol: qmp_query_uuid qemu-img: Not enough arguments Try 'qemu-img --help' for more information To fix this, we should (at least) let qemu-img link qmp_query_uuid from libqemustub.a. (There are a few other symbols missing, as well.) This patch changes the linking rules to: 1) Build ".mo" with "ld -r -o $@ $^" for each ".so", and later build .so with it. 2) Always build all the .mo before linking the executables. This is achieved by adding those .mo files to the executables' "-y" variables. 3) When linking an executable, those .mo files in its "-y" variables are filtered out, and replaced by one or more -Wl,-u,$symbol flags. This is done in the added macro "process-archive-undefs". These "-Wl,-u,$symbol" flags will force ld to pull in the function definition from the archives when linking. Note that the .mo objects, that are actually meant to be linked in the executables, are already expanded in unnest-vars, before the linking command. So we are safe to simply filter out .mo for the purpose of pulling undefined symbols. process-archive-undefs works as this: For each ".mo", find all the undefined symbols in it, filter ones that are defined in the archives. For each of these symbols, generate a "-Wl,-u,$symbol" in the link command, and put them before archive names in the command line. Suggested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-24build-sys: introduce install-prog macro to install&strip binaries and use itMichael Tokarev1-0/+7
Use common rule (macro) to install and strip binaries, and use it in all places where we install binaries, instead of fixing bugs like 1319493 in every place. (This fixes https://bugs.launchpad.net/bugs/1319493) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-16rules.mak: remove $(sort) from extract-libsPaolo Bonzini1-1/+1
Duplicate removal was added to extract-libs in order to avoid including the same library multiple times into the linking command line; this could potentially happen when using "foo.mo-libs" (which adds the library to all components, causing it to appear N times if the module is composed of N objects). However, sorting and removing duplicates causes problems with static linking, and also with space-separated linker options as found in some Mac OS X packaging systems. Furthermore, the "optimization" is really a non-problem since we do not expect .mo modules to be composed of many files. Reported-by: Sean Bruno <sbruno@ignoranthack.me> Tested-by: Sean Bruno <sbruno@ignoranthack.me> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1402929805-16836-1-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-10rules.mak: Rewrite unnest-varsFam Zheng1-79/+158
The macro unnest-vars is the most important, complicated but hard to track magic in QEMU's build system. Rewrite it in a (hopefully) clearer way, with more comments, to make it easier to understand and maintain. Remove DSO_CFLAGS and module-objs-m that are not used. A bonus fix of this version is, per object variables are properly protected in save-objs and load-objs, before including sub-dir Makefile.objs, just as nested variables are. So the occasional same object name from different directory levels won't step on each other's foot. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-09build: simplify and fix fix-obj-varsPaolo Bonzini1-7/+7
fix-obj-vars has the undesired side effect of breaking -cflags -objs and -libs variables in the toplevel Makefile.objs. The variables in the toplevel Makefile.objs do not need any fix, so fix-obj-vars need not do anything. Since we are touching it, remove the now unnecessary $(if) in the callers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-08build: add support for per-object -cflags and -libs to all rulesPaolo Bonzini1-5/+5
This is needed in order to use per-object flags variables. Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-08build: Fix per-object variables for Makefile.targetPaolo Bonzini1-0/+1
The compiling is done in a subdir, so the extraction of per-object libs and cflags are referencing objects with ../ prefixed. So prefix the per-object variables "foo.o-cflags" and "foo.o-libs" to "../foo.o-cflags" and "../foo.o-libs". Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-17rules.mak: Fix per object libs extractionFam Zheng1-2/+2
Don't sort the extracted options, sort the objects. Reported-by: Christian Mahnke <cmahnke@googlemail.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-20module: implement module loadingFam Zheng1-0/+3
This patch adds loading, stamp checking and initialization of modules. The init function of dynamic module is no longer directly called as __attribute__((constructor)) in static linked version, it is called only after passed the checking of presense of stamp symbol: qemu_stamp_$RELEASEHASH where $RELEASEHASH is generated by hashing version strings and content of configure script. With this, modules built from a different tree/version/configure will not be loaded. The module loading code requires gmodule-2.0. Modules are searched under - CONFIG_MODDIR - executable folder (to allow running qemu-{img,io} in the build directory) - ../ of executable folder (to allow running system emulator in the build directory) Modules are linked under their subdir respectively, then copied to top level of build directory for above convinience, e.g.: $(BUILD_DIR)/block/curl.so -> $(BUILD_DIR)/block-curl.so Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-20rules.mak: introduce DSO rulesFam Zheng1-9/+43
Add necessary rules and flags for shared object generation. The new rules introduced here are: 1) %.o in $(common-obj-m) is compiled to %.o, then linked to %.so. 2) %.mo in $(common-obj-m) is the placeholder for %.so for pattern matching in Makefile. It's linked to "-shared" with all its dependencies (multiple *.o) as input. Which means the list of depended objects must be specified in each sub-Makefile.objs: foo.mo-objs := bar.o baz.o qux.o in the same style with foo.o-cflags and foo.o-libs. The objects here will be prefixed with "$(obj)/" if it's a subdirectory Makefile.objs. 3) For all files ending up in %.so, the following is added automatically: foo.o-cflags += -fPIC -DBUILD_DSO Also introduce --enable-modules in configure, the option will enable support of shared object build. Otherwise objects are static linked to executables. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-20rules.mak: allow per object cflags and libsFam Zheng1-3/+16
Adds extract-libs in LINK to expand any "per object libs", the syntax to define such a libs options is like: foo.o-libs := $(CURL_LIBS) in block/Makefile.objs. Similarly, foo.o-cflags := $(FOO_CFLAGS) is also supported. "foo.o" must be listed in a nested var (e.g. common-obj-y) to make the option variables effective. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-20rules.mak: fix $(obj) to a real relative pathFam Zheng1-5/+9
Makefile.target includes rule.mak and unnested common-obj-y, then prefix them with '../', this will ignore object specific QEMU_CFLAGS in subdir Makefile.objs: $(obj)/curl.o: QEMU_CFLAGS += $(CURL_CFLAGS) Because $(obj) here is './block', instead of '../block'. This doesn't hurt compiling because we basically build all .o from top Makefile, before entering Makefile.target, but it will affact arriving per-object libs support. The starting point of $(obj) is passed in as argument of unnest-vars, as well as nested variables, so that different Makefiles can pass in a right value. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-08rules.mak: Link with C++ if we have a C++ compilerPeter Maydell1-2/+6
If we have a C++ compiler available, link with it, because we might be linking some C++ files in. This allows us to include C++ object files in the QEMU binary proper. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-08rules.mak: Support .cc as a C++ source file suffixPeter Maydell1-1/+5
The A64 disassembler libvixl uses .cc as its suffix for C++ source files, so add support for it (we already support .cpp). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2013-10-16rules.mak: New string testing functionsPeter Maydell1-0/+11
Add new string testing functions which return a y/n result: eq : are two strings equal (ignoring leading/trailing space)? ne : are two strings unequal? isempty : is a string empty? notempty : is a string non-empty? Based on an idea by Ákos Kovács <akoskovacs@gmx.com>. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-16rules.mak: New logical functions for handling y/n valuesPeter Maydell1-0/+17
Add new logical functions for handling y/n values like those we use in CONFIG_FOO variables: lnot : logical NOT land : logical AND lor : logical OR lxor : logical XOR leqv : logical equality, inverse of lxor lif : like Make's $(if) but with an eq-like test Based on an idea by Ákos Kovács <akoskovacs@gmx.com>. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-09configure: Support configuring C++ compilerTomoki Sekiyama1-1/+8
Add configuration for C++ compiler in configure and Makefiles. The C++ compiler is choosed as following: - ${CXX}, if it is specified. - ${cross_prefix}g++, if ${cross_prefix} is specified. - Otherwise, c++ is used. Currently, usage of C++ language is only for access to Windows VSS using COM+ services in qemu-guest-agent for Windows. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Micael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-05-03win32: fix compilation againPaolo Bonzini1-5/+1
While commit c02817e5bfbb27955cac970019e6670dc427bc41 fixed compilation without an installed libtool, moving the dependencies to rules.mak does not work because the version-*-y variables are not defined yet. Building in a clean tree thus fails. Revert the commit and remove the dummy /bin/false assignment to LIBTOOL. This makes the build work, at the price of slightly worse errors when there are Makefile bugs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1367425815-15083-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-30rules.mk: Fix build breakageDunrong Huang1-1/+1
The following error occurs when building dtc module: CHK version_gen.h CC libfdt/fdt.o cc1: error: dtc: No such file or directory [-Werror] cc1: all warnings being treated as errors make[1]: *** [libfdt/fdt.o] Error 1 make: *** [subdir-dtc] Error 2 In rules.mak, "-I$(<D) -I$(@D)" was expanded to "-Idtc -I." when building submodule dct. Due to the using of "-Wmissing-include-dirs, a warning would be rarsed. To avoid it, add "-I$(<D) -I$(@D)" to QEMU_INCLUDES instead of QEMU_CFLAGS so that QEMU_CFLAGS does not contain the "-Idtc". Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Dunrong Huang <riegamaths@gmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1367247132-19622-1-git-send-email-riegamaths@gmail.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-27win32: move Makefile dependencies on version-obj-y to rules.makPaolo Bonzini1-0/+3
This makes the test on $(LIBTOOL) work. Otherwise, LIBTOOL is /bin/false by the time the test is done. Fixes Win32 compilation without a working cross-libtool. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-11-19 04:46:14 +0000