aboutsummaryrefslogtreecommitdiff
path: root/rules.mak
AgeCommit message (Collapse)AuthorFilesLines
2020-08-21rules.mak: drop unneeded macrosPaolo Bonzini1-226/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21meson: sphinx-buildPaolo Bonzini1-48/+0
For now, sphinx is run on every invocation of make. The previous mechanism using $(wildcard) is not reproducible in Meson and was also brittle; for example some .rst.inc files were left out. The next patch will introduce a Sphinx extension to emit a depfile. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21rules.mak: remove version.oMarc-André Lureau1-3/+1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21meson: convert systemtap filesMarc-André Lureau1-3/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21meson: link emulators without Makefile.targetPaolo Bonzini1-1/+0
The binaries move to the root directory, e.g. qemu-system-i386 or qemu-arm. This requires changes to qtests, CI, etc. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21meson: convert blockMarc-André Lureau1-2/+1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21meson: add modules infrastructureMarc-André Lureau1-5/+5
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21meson: infrastructure for building emulatorsPaolo Bonzini1-8/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21contrib/vhost-user-gpu: convert to mesonMarc-André Lureau1-7/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21libqemuutil, qapi, trace: convert to mesonPaolo Bonzini1-1/+1
This shows how to do some "computations" in meson.build using its array and dictionary data structures, and also a basic usage of the sourceset module for conditional compilation. Notice the new "if have_system" part of util/meson.build, which fixes a bug in the old build system was buggy: util/dbus.c was built even for non-softmmu builds, but the dependency on -lgio was lost when the linking was done through libqemuutil.a. Because all of its users required gio otherwise, the bug was hidden. Meson instead propagates libqemuutil's dependencies down to its users, and shows the problem. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21build-sys hack: link with whole .fa archivesMarc-André Lureau1-5/+13
In order to link the *-obj-y files into tests, we will make static libraries of them in Meson, and then link them as whole archives into the tests. To separate regular static libraries from link-whole libraries, give them a different file extension. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21configure: prepare CFLAGS/CXXFLAGS/LDFLAGS for MesonPaolo Bonzini1-2/+2
Split between CFLAGS/QEMU_CFLAGS and CXXFLAGS/QEMU_CXXFLAGS so that we will use CFLAGS and CXXFLAGS for flags that we do not want to pass to add_project_arguments. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21build-sys hack: ensure target directory is thereMarc-André Lureau1-0/+1
By removing some unnest-vars calls, we miss some directory creation that may be required by some/dir/object.d. This will go away once everything is converted to Meson. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-09build-sys: Move the print-variable rule to rules.makPhilippe Mathieu-Daudé1-0/+3
Currently the print-variable rule can only be used in the root directory: $ make print-vhost-user-json-y vhost-user-json-y= contrib/vhost-user-gpu/50-qemu-gpu.json tools/virtiofsd/50-qemu-virtiofsd.json $ make -C i386-softmmu print-obj-y make: Entering directory 'build/i386-softmmu' make: *** No rule to make target 'print-obj-y'. Stop. make: Leaving directory 'build/i386-softmmu' Move it to rules.mak so we can use it from other directories: $ make -C i386-softmmu print-obj-y make: Entering directory 'build/i386-softmmu' obj-y=qapi-introspect.o qapi-types-machine-target.o qapi-types-misc-target.o qapi-types.o qapi-visit-machine-target.o qapi-visit-misc-target.o qapi-visit.o qapi-events-machine-target.o qapi-events-misc-target.o qapi-events.o qapi-commands-machine-target.o qapi-commands-misc-target.o qapi-commands.o qapi-init-commands.o make: Leaving directory 'build/i386-softmmu' Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200306170456.21977-1-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-02-03Makefile: Ensure we don't run Sphinx in parallel for manpagesPeter Maydell1-0/+36
Sphinx will corrupt its doctree cache if we run two copies of it in parallel. In commit 6bda415c10d966c8d3 we worked around this by having separate doctrees for 'html' vs 'manpage' runs. However now that we have more than one manpage produced from a single manual we can run into this again when trying to produce the two manpages. Use the trick described in 'Atomic Rules in GNU Make' https://www.cmcrossroads.com/article/atomic-rules-gnu-make to ensure that we only run the Sphinx manpage builder once for each manual, even if we're producing several manpages. This fixes doctree corruption in parallel builds and also avoids pointlessly running Sphinx more often than we need to. (In GNU Make 4.3 there is builtin support for this, via the "&:" syntax, but we can't wait for that to be available in all the distros we support...) The generic "one invocation for multiple output files" machinery is provided as a macro named 'atomic' in rules.mak; we then wrap this in a more specific macro for defining the rule and dependencies for the manpages in a Sphinx manual, to avoid excessive repetition. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200124162606.8787-2-peter.maydell@linaro.org
2020-01-24build-sys: clean up flags included in the linker command linePaolo Bonzini1-2/+2
Some of the CFLAGS that are discovered during configure, for example compiler warnings, are being included on the linker command line because QEMU_CFLAGS is added to it. Other flags, such as the -m32, appear twice because they are included in both QEMU_CFLAGS and LDFLAGS. All this leads to confusion with respect to what goes in which Makefile variables (and we have plenty). So, introduce QEMU_LDFLAGS for flags discovered by configure, following the lead of QEMU_CFLAGS, and stop adding to it: 1) options that are already in CFLAGS, for example "-g" 2) duplicate options At the same time, options that _are_ needed by both compiler and linker must now be added to both QEMU_CFLAGS and QEMU_LDFLAGS, which is clearer. This is mostly -fsanitize options. For now, --extra-cflags has this behavior (but --extra-cxxflags does not). Meson will not include CFLAGS on the linker command line, do the same in our build system as well. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-29contrib: add vhost-user-gpuMarc-André Lureau1-1/+8
Add a vhost-user gpu backend, based on virtio-gpu/3d device. It is associated with a vhost-user-gpu device. Various TODO and nice to have items: - multi-head support - crash & resume handling - accelerated rendering/display that avoids the waiting round trips - edid support Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20190524130946.31736-6-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-07build: switch to KconfigPaolo Bonzini1-1/+1
The make_device_config.sh script is replaced by minikconf, which is modified to support the same command line as its predecessor. The roots of the parsing are default-configs/*.mak, Kconfig.host and hw/Kconfig. One difference with make_device_config.sh is that all symbols have to be defined in a Kconfig file, including those coming from the configure script. This is the reason for the Kconfig.host file introduced in the previous patch. Whenever a file in default-configs/*.mak used $(...) to refer to a config-host.mak symbol, this is replaced by a Kconfig dependency; this part must be done already in this patch for bisectability. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-28-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-06build: Correct explanation of unnest-vars exampleMarkus Armbruster1-1/+1
Cc: Fam Zheng <fam@euphon.net> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190213130240.15492-1-armbru@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-11test: replace gtester with a TAP driverPaolo Bonzini1-1/+3
gtester is deprecated by upstream glib (see for example the announcement at https://blog.gtk.org/2018/07/11/news-from-glib-2-58/) and it does not support tests that call g_test_skip in some glib stable releases. glib suggests instead using Automake's TAP support, which gtest itself supports since version 2.38 (QEMU's minimum requirement is 2.40). We do not support Automake, but we can use Automake's code to beautify the TAP output. I chose to use the Perl copy rather than the shell/awk one, with some changes so that it can accept TAP through stdin, in order to reuse Perl's TAP parsing package. This also avoids duplicating the parser between tap-driver.pl and tap-merge.pl. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1543513531-1151-3-git-send-email-pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-04tests/docker/Makefile.include: handle empty TARGET_LISTAlex Bennée1-0/+3
If the user doesn't specify a TARGET_LIST they get the current configuration but with spaces and hilarity ensues. This adds some make magic to turn the TARGET_LIST back into a comma separated list. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20180521103504.26432-1-alex.bennee@linaro.org> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-05-11configure: Really use local libfdt if the system one is too oldPhilippe Mathieu-Daudé1-1/+1
QEMU requires libfdt version >= 1.4.2. If the host has an older libfdt installed, the configure script will use a (git cloned) local version. Example with Debian 8: $ dpkg-query --showformat='${Version}\n' --show libfdt-dev 1.4.0+dfsg-1 $ ./configure [...] fdt support yes # from git submodule 'dtc' If this case occurs, the linker will have 2 different libfdt available in the library search path. The default behavior is to search the system path first, then the local path. Even if the configure script noticed the libfdt is too old and clone a more recent locally, when linking the system library is selected first, and the link process eventually fails: LINK mips64el-softmmu/qemu-system-mips64el ../hw/core/loader-fit.o: In function `load_fit': /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:278: undefined reference to `fdt_first_subnode' /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:286: undefined reference to `fdt_next_subnode' /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:277: undefined reference to `fdt_first_subnode' collect2: error: ld returned 1 exit status Makefile:201: recipe for target 'qemu-system-mips64el' failed make[1]: *** [qemu-system-mips64el] Error 1 QEMU already uses a kludge to enforce local CFLAGS before system ones for libpixman and libfdt, add a similar kludge for the LDFLAGS to enforce using the local libfdt. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180415230522.24404-2-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2018-03-23make: switch from -I to -iquoteMichael S. Tsirkin1-1/+1
Our rule right now is to use <> for external headers, "" for internal ones. The idea was to avoid conflicts between e.g. a system file named <trace.h> and an internal one by the same name. Unfortunately we use -I compiler flag so it does not help: a system file doing #include <trace.h> will still pick up ours first. To fix, switch to -iquote which is supported by both gcc and clang and only affects #include "" directives. As a side effect, this catches any future uses of #include <> for internal headers. Suggested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-02-13Revert "build-sys: silence make by default or V=0"Daniel P. Berrange1-2/+0
This reverts commit 42a77f1ce4934b243df003f95bda88530631387a. The primary intention of this change was to silence messages like make[1]: '/home/berrange/src/virt/qemu/capstone/libcapstone.a' is up to date. which we get when calling make recursively with explicit targets. The problem is that this change affected every make target, not merely the targets that triggered these "is up to date" messages. As a result any targets that were not invoking commands via "$(call quiet-command ...)" suddenly become silent. This is particularly bad for "make install" which now appears todo nothing. Rather than go through every make rule and try to identify places where we now need to explicitly print a message to show work taking place, just revert the change. To address the original problem of silencing "is up to date" messages, we simply add --quiet to the SUBDIR_MAKEVARS variable, so it only affects us on recursive make calls. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20180123164718.12714-2-berrange@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-12build-sys: silence make by default or V=0Marc-André Lureau1-0/+2
Move generic make flags in MAKEFLAGS (SUBDIR_MAKEFLAGS is more qemu specific). Use --quiet to silence make 'is up to date' message. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180104160523.22995-3-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-15docs: create interop/ subdirectoryPaolo Bonzini1-1/+1
This is for the future interoperability & management guide. It includes the QAPI docs, including the automatically generated ones, other socket protocols (vhost-user, VNC), and the qcow2 file format. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-07configure: split c and cxx extra flagsBruno Dominguez1-3/+0
There was no possibility to add specific cxx flags using the configure file. So A new entrance has been created to support it. Duplication of information in configure and rules.mak. Taking QEMU_CFLAGS and add them to QEMU_CXXFLAGS, now the value of QEMU_CXXFLAGS is stored in config-host.mak, so there is no need for it. The makefile for libvixl was adding flags for QEMU_CXXFLAGS in QEMU_CFLAGS because of the addition in rules.mak. That was removed, so adding them where it should be. Signed-off-by: Bruno Dominguez <bru.dominguez@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1496754467-20893-1-git-send-email-bru.dominguez@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-03-16qapi: Clean up build of generated documentationMarkus Armbruster1-1/+1
Rename intermediate qemu-qapi.texi to qemu-qmp-qapi.texi to match its user qemu-qmp-ref.texi, just like qemu-ga-qapi.texi matches qemu-ga-ref.texi. Build the intermediate .texi next to the sources and the final output in docs/ instead of dumping them into the build root. Fix version.texi dependencies so that only the targets that actually need it depend on it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1489582656-31133-8-git-send-email-armbru@redhat.com>
2017-02-07rules: don't try to create missing include dirsDaniel P. Berrange1-1/+0
In commit ba78db44f6532d66a1e704bd44613e841baa2fc5 Author: Daniel P. Berrange <berrange@redhat.com> Date: Wed Jan 25 16:14:10 2017 +0000 make: move top level dir to end of include search path The dir $(BUILD_DIR)/$(@D) was added to the include path. This would sometimes point to a non-existant directory, if the sub-dir in question did not contain any target-independant files (eg tcg/). To deal with this the rules.mak attempted to create the directory. While this was succesful, it also caused accidental creation of files in the parent of the build dir. e.g. when building common source files into target specific output files. Rather than trying to workaround this, just revert the code that attempted to mkdir the missing include directories. Instead just turn off the compiler warning in question as the missing dir is expected & harmless in general. NB: you can clean up a build directory parent that has been filled with empty directories by commit ba78db44f653 using this GNU find command in that parent directory: find audio backends block chardev crypto disas fsdev hw io linux-user \ migration nbd net qapi qom replay slirp target ui util \ -type d -empty -delete Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Tested-by: Alberto Garcia <berto@igalia.com> [PMM: added note about how to clean up a polluted directory] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-31make: move top level dir to end of include search pathDaniel P. Berrange1-7/+23
Currently the search path is 1. source dir corresponding to input file (implicit by compiler) 2. top level build dir 3. top level source dir 4. top level source include/ dir 5. source dir corresponding to input file 6. build dir corresponding to output file Search item 5 is an effective no-op, since it duplicates item 1. When srcdir == builddir, item 6 also duplicates item 1, which causes a semantic difference between VPATH and non-VPATH builds. Thus to ensure consistent semantics we need item 6 to be present immediately after item 1. e.g. 1. source dir corresponding to input file (implicit by compiler) 2. build dir corresponding to output file 3. top level build dir 4. top level source dir 5. top level source include/ dir When srcdir == builddir, items 1 & 2 collapse into one, and items 3 & 4 collapse into one, but the overall search order is still consistent with srcdir != builddir A further complication is that while most of the source files are built with a current directory of $BUILD_DIR, target dependant files are built with a current directory of $BUILD_DIR/$TARGET. As a result, search item 2 resolves to a different location for target independant vs target dependant files. For example when building 'migration/ram.o', the use of '-I$(@D)' (which expands to '-Imigration') would not find '$BUILD_DIR/migration', but rather '$BUILD_DIR/$TARGET/migration'. If there are generated headers files to be used by the migration code in '$BUILD_DIR/migration', these will not be found by the relative include, an absolute include is needed instead. This has not been a problem so far, since nothing has been generating headers in sub-dirs, but the trace code will shortly be doing that. So it is needed to list '-I$(BUILD_DIR)/$(@D)' as well as '-I$(@D)' to ensure both directories are searched when building target dependant code. So the search order ends up being: 1. source dir corresponding to input file (implicit by compiler) 2. build dir corresponding to output file (absolute) 3. build dir corresponding to output file (relative to cwd) 4. top level build dir 5. top level source dir 6. top level source include/ dir One final complication is that the absolute '-I$(BUILD_DIR)/$(@D)' will sometimes end up pointing to a non-existant directory if that sub-dir does not have any target-independant files to be built. Rather than try to dynamically filter this, a simple 'mkdir' ensures $(BUILD_DIR)/$(@D) is guaranteed to exist at all times. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170125161417.31949-2-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-16build-sys: add qapi doc generation targetsMarc-André Lureau1-0/+2
Generate and install the man, txt and html versions of QAPI documentation (generate and install qemu-doc.txt too). Add it also to optional pdf/info targets. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170113144135.5150-22-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-01-16build-sys: use a generic TEXI2MAN ruleMarc-André Lureau1-0/+10
The recipe for making a man page from .texi is duplicated several times over. Capture it in suitable pattern rules instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170113144135.5150-20-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-12-22rules.mak: add more rules to avoid chainingPaolo Bonzini1-0/+4
Really rule chaining is not a particularly expensive task, since GNU Make caches the directory listing. However it is easy to avoid it for most files and for phony targets (one was missing). After this patch, only "Makefile", "scripts/hxtool" and "scripts/create_config" attempt to use chained rules. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-22rules.mak: speedup save-vars load-varsPaolo Bonzini1-12/+10
Unnesting variables spends a lot of time parsing and executing foreach and if functions. Because actually very few variables have to be saved and restored, a good strategy is to remember what has to be done in load-vars, and only iterate the right variables in load-vars. For save-vars, unroll the foreach loop to provide another small improvement. This speeds up a "noop" build from around 15.5 seconds on my laptop to 11.7 (25% roughly). Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-29rules.mak: Also try -r to build modulesPaolo Bonzini1-1/+1
Building qemu fails in distributions where gcc enables PIE by default (e.g. Debian unstable) with: /usr/bin/ld: -r and -pie may not be used together You have to use -r instead of -Wl,-r to avoid gcc passing -pie to the linker when PIE is enabled and a relocatable object is passed. However, clang does not know about -r, so try -Wl,-r first. [This is a fix for commit c96f0ee6a67ca6277366e78ce5d84d5c20dd596f ("rules.mak: Use -r instead of -Wl, -r to fix building when PIE is default") which mostly worked but broke the ./configure --enable-modules build with clang. --Stefan] Reported-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161129153720.29747-1-pbonzini@redhat.com Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-28rules.mak: Use -r instead of -Wl, -r to fix building when PIE is defaultAdrian Bunk1-1/+1
Building qemu fails in distributions where gcc enables PIE by default (e.g. Debian unstable) with: /usr/bin/ld: -r and -pie may not be used together Use -r instead of -Wl,-r to avoid gcc passing -pie to the linker when PIE is enabled and a relocatable object is passed. Signed-off-by: Adrian Bunk <bunk@stusta.de> Message-Id: <20161127162817.15144-1-bunk@stusta.de> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-08build-sys: fix find-in-pathMarc-André Lureau1-1/+1
Fix spelling, the GNU make text functions is not called "find-string" but "findstring". Broken in commit 2b2e59e. Fairly harmless: its only use is in tests/tcg/Makefile, where the bug can cause the I386_TESTS not to run when they should. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-06rules.mak: quiet-command: Split command name and args to printPeter Maydell1-13/+19
The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-09-13rules.mak: Don't extract libs from .mo-libs in link commandFam Zheng1-1/+1
For module build, .mo objects are passed to LINK and consumed in process-archive-undefs. The reason behind that is documented in the comment above process-archive-undefs. Similarly, extract-libs should be called with .mo filtered out too. Otherwise, the .mo-libs are added to the link command incorrectly, spoiling the purpose of modularization. Currently we don't have any .mo-libs usage, but it will be used soon when we modularize more multi-source objects, like sdl and gtk. Reported-by: Colin Lord <clord@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <1469600777-30413-2-git-send-email-famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-06s390x/cpumodel: generate CPU feature lists for CPU modelsMichael Mueller1-0/+1
This patch introduces the helper "gen-features" which allows to generate feature list definitions at compile time. Its flexibility is better and the error-proneness is lower when compared to static programming time added statements. The helper includes "target-s390x/cpu_features.h" to be able to use named facility bits instead of numbers. The generated defines will be used for the definition of CPU models. We generate feature lists for each HW generation and GA for EC models. BC models are always based on a EC version and have no separate definitions. Base features: Features we expect to be always available in sane setups. Migration safe - will never change. Can be seen as "minimum features required for a CPU model". Default features: Features we expect to be stable and around in latest setups (e.g. having KVM support) - not migration safe. Max features: All supported features that are theoretically allowed for a CPU model. Exceeding these features could otherwise produce problems with IBC (instruction blocking controls) in KVM. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> [generate base, default and models. renaming and cleanup] Message-Id: <20160905085244.99980-6-dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-07-29optionrom: fix detection of -Wa,-32Paolo Bonzini1-0/+2
The cc-option macro runs $(CC) in -S mode (generate assembly) to avoid a pointless run of the assembler. However, this does not work when you want to detect support for cc->as option passthrough. clang ignores -Wa unless -c is provided, and exits successfully even if the -Wa,-32 option is not supported. Reported-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1469043409-14033-1-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-10build: Use $(AS) for optionrom explicitlyRichard Henderson1-1/+1
For clang before 3.5, -fno-integrated-as does not exist, so the workaround in 5f6f0e27fb24 fails to build. Use clang's default assembler for linux-user/safe-syscall.S, and explicitly change to use the system assembler for the option roms. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-07-05build: Use $(CCAS) for compiling .S filesRichard Henderson1-5/+2
We fail to pass to $(AS) all of the different flags that may be required for a given set of CFLAGS. Rather than figuring out the host-specific mapping, it's better to allow the compiler driver to do that. However, simply using $(CC) runs afoul of clang trying to build the option roms. C.f. 3dd46c78525a30e98c68, wherein we changed from using $(CC) to using $(AS) in the first place. Work around this by passing -fno-integrated-as to clang, so that we use the external assembler, and the clang driver still passes along all of the options that the assembler might require. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1466703558-7723-1-git-send-email-rth@twiddle.net>
2016-06-08Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+1
* max-ram-below-4g improvement (Gerd) * escc fix (xiaoqiang) * ESP fix (Prasad) * scsi-disk tweaks/fix (me) * Makefile dependency fixes (me) * PKGVERSION improvement (Fam) * -vnc man improvement (Robert) # gpg: Signature made Tue 07 Jun 2016 18:06:22 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: vnc: list the 'to' parameter of '-vnc' in the qemu man page scsi-disk: add missing break Makefile: Derive "PKGVERSION" from "git describe" by default Makefile: add dependency on scripts/hxtool Makefile: add dependency on scripts/make_device_config.sh Makefile: add dependency on scripts/create_config Makefile: Add a "FORCE" target scsi: megasas: null terminate bios version buffer scsi: mark TYPE_SCSI_DISK_BASE as abstract scsi: esp: check TI buffer index before read/write hw/char: QOM'ify escc.c (fix) pc: allow raising low memory via max-ram-below-4g option tests: Rename tests/Makefile to tests/Makefile.include Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-07Fix linking relocatable objects on SparcJames Clarke1-1/+1
On Sparc, gcc implicitly passes --relax to the linker, but -r is incompatible with this. Therefore, if --no-relax is supported, it should be passed to the linker. Signed-off-by: James Clarke <jrtc27@jrtc27.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-07Makefile: add dependency on scripts/create_configPaolo Bonzini1-1/+1
Make sure that config-host.h and config-target.h are rebuilt whenever there is a change in the scripts that generates them; add the dependency to the pattern rule as suggested by Peter. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-01rules.mak: Add "COMMA" constantFam Zheng1-0/+2
Using "," literal in $(call quiet-command, ...) arguments is awkward. Add this constant to make it at least doable. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1464755128-32490-3-git-send-email-famz@redhat.com
2016-02-17rules: filter out irrelevant filesMichael S. Tsirkin1-1/+1
It's often handy to make executables depend on each other, e.g. make a test depend on a helper. This doesn't work now, as linker will attempt to use the helper as an object. To fix, filter only relevant file types before linking an executable. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-11remove libtool supportMichael Tokarev1-18/+0
Libtool support was needed to build shared library for libcacard. Now there's no need to use libtool, and since the build system is already complicated enough, we have a way to slightly de-complicate it. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
2015-08-13make: load only required dependency files.Victor Kaplansky1-1/+1
The old rules.mak loads dependency .d files using include directive with file glob pattern "*.d". This breaks the build when build tree has left-over *.d files from another build. This patch fixes this by - loading precise list of .d files made from *.o and *.mo. - specifying explicit list of required dependency info files for *.hex autogenerated sources. Note that Makefile still includes some .d in root directory by including "*.d". Signed-off-by: Victor Kaplansky <victork@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>