aboutsummaryrefslogtreecommitdiff
path: root/replay
AgeCommit message (Collapse)AuthorFilesLines
2023-06-20meson: Replace softmmu_ss -> system_ssPhilippe Mathieu-Daudé1-1/+1
We use the user_ss[] array to hold the user emulation sources, and the softmmu_ss[] array to hold the system emulation ones. Hold the latter in the 'system_ss[]' array for parity with user emulation. Mechanical change doing: $ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-10-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-28ui: add the infrastructure to support MT eventsSergio Lopez1-0/+18
Add the required infrastructure to support generating multitouch events. Signed-off-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230526112925.38794-3-slp@redhat.com>
2023-05-11accel/tcg/tcg-accel-ops-rr: ensure fairness with icountJamie Iles1-2/+1
The round-robin scheduler will iterate over the CPU list with an assigned budget until the next timer expiry and may exit early because of a TB exit. This is fine under normal operation but with icount enabled and SMP it is possible for a CPU to be starved of run time and the system live-locks. For example, booting a riscv64 platform with '-icount shift=0,align=off,sleep=on -smp 2' we observe a livelock once the kernel has timers enabled and starts performing TLB shootdowns. In this case we have CPU 0 in M-mode with interrupts disabled sending an IPI to CPU 1. As we enter the TCG loop, we assign the icount budget to next timer interrupt to CPU 0 and begin executing where the guest is sat in a busy loop exhausting all of the budget before we try to execute CPU 1 which is the target of the IPI but CPU 1 is left with no budget with which to execute and the process repeats. We try here to add some fairness by splitting the budget across all of the CPUs on the thread fairly before entering each one. The CPU count is cached on CPU list generation ID to avoid iterating the list on each loop iteration. With this change it is possible to boot an SMP rv64 guest with icount enabled and no hangs. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jamie Iles <quic_jiles@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230427020925.51003-3-quic_jiles@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-02-23replay: Simplify setting replay blockersMarkus Armbruster2-2/+6
replay_add_blocker() takes an Error *. All callers pass one created like this: error_setg(&blocker, QERR_REPLAY_NOT_SUPPORTED, "some feature"); Folding this into replay_add_blocker() simplifies the callers, losing a bit of generality we haven't needed in more than six years. Since there are no other uses of macro QERR_REPLAY_NOT_SUPPORTED, replace the remaining one by its expansion, and drop the macro. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20230207075115.1525-10-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-12-15Merge tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru into stagingPeter Maydell1-4/+1
Miscellaneous patches for 2022-12-14 # gpg: Signature made Wed 14 Dec 2022 15:23:02 GMT # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru: ppc4xx_sdram: Simplify sdram_ddr_size() to return block/vmdk: Simplify vmdk_co_create() to return directly cleanup: Tweak and re-run return_directly.cocci io: Tidy up fat-fingered parameter name qapi: Use returned bool to check for failure (again) sockets: Use ERRP_GUARD() where obviously appropriate qemu-config: Use ERRP_GUARD() where obviously appropriate qemu-config: Make config_parse_qdict() return bool monitor: Use ERRP_GUARD() in monitor_init() monitor: Simplify monitor_fd_param()'s error handling error: Move ERRP_GUARD() to the beginning of the function error: Drop a few superfluous ERRP_GUARD() error: Drop some obviously superfluous error_propagate() Drop more useless casts from void * to pointer Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-14qapi replay: Elide redundant has_FOO in generated CMarkus Armbruster1-1/+0
The has_FOO for pointer-valued FOO are redundant, except for arrays. They are also a nuisance to work with. Recent commit "qapi: Start to elide redundant has_FOO in generated C" provided the means to elide them step by step. This is the step for qapi/replay.json. Said commit explains the transformation in more detail. The invariant violations mentioned there do not occur here. Cc: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221104160712.3005652-22-armbru@redhat.com>
2022-12-14cleanup: Tweak and re-run return_directly.cocciMarkus Armbruster1-4/+1
Tweak the semantic patch to drop redundant parenthesis around the return expression. Coccinelle drops a comment in hw/rdma/vmw/pvrdma_cmd.c; restored manually. Coccinelle messes up vmdk_co_create(), not sure why. Change dropped, will be done manually in the next commit. Line breaks in target/avr/cpu.h and hw/rdma/vmw/pvrdma_cmd.c tidied up manually. Whitespace in tools/virtiofsd/fuse_lowlevel.c tidied up manually. checkpatch.pl complains "return of an errno should typically be -ve" two times for hw/9pfs/9p-synth.c. Preexisting, the patch merely makes it visible to checkpatch.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221122134917.1217307-2-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2022-11-29replay: Fix declaration of replay_read_next_clockRichard Henderson1-1/+1
Fixes the build with gcc 13: replay/replay-time.c:34:6: error: conflicting types for \ 'replay_read_next_clock' due to enum/integer mismatch; \ have 'void(ReplayClockKind)' [-Werror=enum-int-mismatch] 34 | void replay_read_next_clock(ReplayClockKind kind) | ^~~~~~~~~~~~~~~~~~~~~~ In file included from ../qemu/replay/replay-time.c:14: replay/replay-internal.h:139:6: note: previous declaration of \ 'replay_read_next_clock' with type 'void(unsigned int)' 139 | void replay_read_next_clock(unsigned int kind); | ^~~~~~~~~~~~~~~~~~~~~~ Fixes: 8eda206e090 ("replay: recording and replaying clock ticks") Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20221129010547.284051-1-richard.henderson@linaro.org>
2022-10-04Merge tag 'trivial-branch-for-7.2-pull-request' of ↵Stefan Hajnoczi1-4/+2
https://gitlab.com/laurent_vivier/qemu into staging Pull request trivial patches branch 20220930-v2 # -----BEGIN PGP SIGNATURE----- # # iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmM7XoISHGxhdXJlbnRA # dml2aWVyLmV1AAoJEPMMOL0/L748D/0QAKbYtTWjhFPeapjZVoTv13YrTvczWrcF # omL6IZivVq0t7hun4iem0DwmvXJELMGexEOTvEJOzM19IIlvvwvOsI8xnxpcMnEY # 6GKVbs53Ba0bg2yh7Dll2W9jkou9eX27DwUHMVF8KX7qqsbU+WyD/vdGZitgGt+T # 8yna7kzVvNVsdB3+DbIatI5RzzHeu4OqeuH/WCtAyzCaLB64UYTcHprskxIp4+wp # dR+EUSoDEr9Qx4PC+uVEsTFK1zZjyAYNoNIkh6fhlkRvDJ1uA75m3EJ57P8xPPqe # VbVkPMKi0d4c52m6XvLsQhyYryLx/qLLUAkJWVpY66aHcapYbZAEAfZmNGTQLrOJ # qIOJzIkOdU6l3pRgXVdVCgkHRc2HETwET2LyVbNkUz/vBlW2wOZQbZFbezComael # bQ/gNBYqP+eOGnZzeWbKBGHr/9QDBClNufidIMC+sOiUw0iSifzjkFwvH7IElx6K # EQCOSV6pOhKVlinTpmBbk1XD3xDkQ7ZidiLT9g+P1c8dExrXBhWOnfUHueISb8+s # KKMozuxQ/6/3c/DP5hwI9cKPEWEbqJfq1kMuxIvEivKGwUIqX2yq4VJ+hSlYJ+CW # nGjXZldtf4KwH+cTsxyPmdZRR5Q7+ODr5Xo7GNvEKBuDsHs7uUl1c3vvOykQgje9 # +dyJR6TfbQWn # =aK29 # -----END PGP SIGNATURE----- # gpg: Signature made Mon 03 Oct 2022 18:13:22 EDT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * tag 'trivial-branch-for-7.2-pull-request' of https://gitlab.com/laurent_vivier/qemu: docs: Update TPM documentation for usage of a TPM 2 Use g_new() & friends where that makes obvious sense Drop superfluous conditionals around g_free() block/qcow2-bitmap: Add missing cast to silent GCC error checkpatch: ignore target/hexagon/imported/* files mem/cxl_type3: fix GPF DVSEC .gitignore: add .cache/ to .gitignore hw/virtio/vhost-shadow-virtqueue: Silence GCC error "maybe-uninitialized" Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-10-04Drop superfluous conditionals around g_free()Markus Armbruster1-4/+2
There is no need to guard g_free(P) with if (P): g_free(NULL) is safe. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220923090428.93529-1-armbru@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-09-29chardev: src buffer const for write functionsArwed Meyer1-1/+1
Make source buffers const for char be write functions. This allows using buffers returned by fifo as buf parameter and source buffer should not be changed by write functions anyway. Signed-off-by: Arwed Meyer <arwed.meyer@gmx.de> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220911181840.8933-3-arwed.meyer@gmx.de>
2022-06-06replay: simplify async event processingPavel Dovgalyuk4-42/+31
This patch joins replay event id and async event id into single byte in the log. It makes processing a bit faster and log a bit smaller. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> -- v2: minor enum fixes (suggested by Richard Henderson) Message-Id: <165364838393.688121.8191379555130516329.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-06replay: rewrite async event handlingPavel Dovgalyuk4-63/+38
This patch decouples checkpoints and async events. It was a tricky part of replay implementation. Now it becomes much simpler and easier to maintain. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <165364837856.688121.8785039478408995979.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-06replay: fix event queue flush for qemu shutdownPavel Dovgalyuk1-2/+1
This patch fixes event queue flush in the case of emulator shutdown. replay_finish_events should be called when replay_mode is not cleared. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <165364836758.688121.7959245442743676491.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-21Use g_new() & friends where that makes obvious senseMarkus Armbruster2-7/+7
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer, for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. This commit only touches allocations with size arguments of the form sizeof(T). Patch created mechanically with: $ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \ --macro-file scripts/cocci-macro-file.h FILES... Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20220315144156.1595462-4-armbru@redhat.com> Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
2021-04-01replay: notify CPU on eventPavel Dovgalyuk1-0/+2
This patch enables vCPU notification to wake it up when new async event comes in replay mode. The motivation of this patch is the following. Consider recorded block async event. It is saved into the log with one of the checkpoints. This checkpoint may be passed in vCPU loop. In replay mode when this async event is read from the log, and block thread task is not finished yet, vCPU thread goes to sleep. That is why this patch adds waking up the vCPU to process this finished event. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Message-Id: <161726519158.1476949.7614181684462079836.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-04-01replay: fix recursive checkpointsPavel Dovgalyuk1-5/+6
Record/replay uses checkpoints to synchronize the execution of the threads and timers. Hardware events such as BH are processed at the checkpoints too. Event processing can cause refreshing the virtual timers and calling the icount-related functions, that also use checkpoints. This patch prevents recursive processing of such checkpoints, because they have their own records in the log and should be processed later. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Message-Id: <161700476500.1140362.10108444973730452257.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-16replay: fix icount request when replaying clock accessPavel Dovgalyuk3-28/+28
Record/replay provides REPLAY_CLOCK_LOCKED macro to access the clock when vm_clock_seqlock is locked. This macro is needed because replay internals operate icount. In locked case replay use icount_get_raw_locked for icount request, which prevents excess locking which leads to deadlock. But previously only record code used *_locked function and replay did not. Therefore sometimes clock access lead to deadlocks. This patch fixes clock access for replay too and uses *_locked icount access function. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Message-Id: <161347990483.1313189.8371838968343494161.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-08migration: wire up support for snapshot device selectionDaniel P. Berrangé2-4/+5
Modify load_snapshot/save_snapshot to accept the device list and vmstate node name parameters previously added to the block layer. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210204124834.774401-9-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08migration: control whether snapshots are ovewrittenDaniel P. Berrangé2-2/+2
The traditional HMP "savevm" command will overwrite an existing snapshot if it already exists with the requested name. This new flag allows this to be controlled allowing for safer behaviour with a future QMP command. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210204124834.774401-8-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08block: rename and alter bdrv_all_find_snapshot semanticsDaniel P. Berrangé1-1/+5
Currently bdrv_all_find_snapshot() will return 0 if it finds a snapshot, -1 if an error occurs, or if it fails to find a snapshot. New callers to be added want to distinguish between the error scenario and failing to find a snapshot. Rename it to bdrv_all_has_snapshot and make it return -1 on error, 0 if no snapshot is found and 1 if snapshot is found. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210204124834.774401-7-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08block: allow specifying name of block device for vmstate storageDaniel P. Berrangé1-1/+1
Currently the vmstate will be stored in the first block device that supports snapshots. Historically this would have usually been the root device, but with UEFI it might be the variable store. There needs to be a way to override the choice of block device to store the state in. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210204124834.774401-6-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08block: add ability to specify list of blockdevs during snapshotDaniel P. Berrangé1-2/+2
When running snapshot operations, there are various rules for which blockdevs are included/excluded. While this provides reasonable default behaviour, there are scenarios that are not well handled by the default logic. Some of the conditions do not have a single correct answer. Thus there needs to be a way for the mgmt app to provide an explicit list of blockdevs to perform snapshots across. This can be achieved by passing a list of node names that should be used. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210204124834.774401-5-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08migration: stop returning errno from load_snapshot()Daniel P. Berrangé1-1/+1
None of the callers care about the errno value since there is a full Error object populated. This gives consistency with save_snapshot() which already just returns a boolean value. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> [PMD: Return false/true instead of -1/0, document function] Acked-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210204124834.774401-4-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08migration: Make save_snapshot() return bool, not 0/-1Philippe Mathieu-Daudé2-2/+2
Just for consistency, following the example documented since commit e3fe3988d7 ("error: Document Error API usage rules"), return a boolean value indicating an error is set or not. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210204124834.774401-3-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08block: push error reporting into bdrv_all_*_snapshot functionsDaniel P. Berrangé1-2/+2
The bdrv_all_*_snapshot functions return a BlockDriverState pointer for the invalid backend, which the callers then use to report an error message. In some cases multiple callers are reporting the same error message, but with slightly different text. In the future there will be more error scenarios for some of these methods, which will benefit from fine grained error message reporting. So it is helpful to push error reporting down a level. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> [PMD: Initialize variables] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210204124834.774401-2-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-01-08Remove superfluous timer_del() callsPeter Maydell1-1/+0
This commit is the result of running the timer-del-timer-free.cocci script on the whole source tree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
2020-11-09replay: remove some dead codePavel Dovgalyuk1-3/+0
This patch removes dead code in replay_continue_stop() function. Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru> Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <160455661411.3455.4177953912304752892.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-22replay: do not build if TCG is not availableClaudio Fontana2-2/+98
this fixes non-TCG builds broken recently by replay reverse debugging. Stub the needed functions in stub/, splitting roughly between functions needed only by system emulation, by system emulation and tools, and by everyone. This includes duplicating some code in replay/, and puts the logic for non-replay related events in the replay/ module (+ the stubs), so this should be revisited in the future. Surprisingly, only _one_ qtest was affected by this, ide-test.c, which resulted in a buzz as the bh events were never delivered, and the bh never executed. Many other subsystems _should_ have been affected. This fixes the immediate issue, however a better way to group replay functionality to TCG-only code could be developed in the long term. Signed-off-by: Claudio Fontana <cfontana@suse.de> Message-Id: <20201013192123.22632-4-cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06replay: create temporary snapshot at debugger connectionPavel Dovgalyuk1-0/+14
When record/replay does not uses overlays for storing the snapshots, user is not capable of issuing reverse debugging commands. This patch adds creation of the VM snapshot on the temporary overlay image, when the debugger connects to QEMU. Therefore the execution can be rewind to the moment of the debugger connection while debugging the virtual machine. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> -- v6: - dropped unused error processing (suggested by Philippe Mathieu-Daudé) Message-Id: <160174524096.12451.11651270339216758643.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06gdbstub: add reverse continue support in replay modePavel Dovgalyuk1-0/+72
This patch adds support of the reverse continue operation for gdbstub. Reverse continue finds the last breakpoint that would happen in normal execution from the beginning to the current moment. Implementation of the reverse continue replays the execution twice: to find the breakpoints that were hit and to seek to the last breakpoint. Reverse continue loads the previous snapshot and tries to find the breakpoint since that moment. If there are no such breakpoints, it proceeds to the earlier snapshot, and so on. When no breakpoints or watchpoints were hit at all, execution stops at the beginning of the replay log. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Message-Id: <160174522930.12451.6994758004725016836.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06gdbstub: add reverse step support in replay modePavel Dovgalyuk1-0/+34
GDB remote protocol supports two reverse debugging commands: reverse step and reverse continue. This patch adds support of the first one to the gdbstub. Reverse step is intended to step one instruction in the backwards direction. This is not possible in regular execution. But replayed execution is deterministic, therefore we can load one of the prior snapshots and proceed to the desired step. It is equivalent to stepping one instruction back. There should be at least one snapshot preceding the debugged part of the replay log. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> -- v4 changes: - inverted condition in cpu_handle_guest_debug (suggested by Alex Bennée) Message-Id: <160174522341.12451.1498758422543765253.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06replay: flush rr queue before loading the vmstatePavel Dovgalyuk2-2/+4
Non-empty record/replay queue prevents saving and loading the VM state, because it includes pending bottom halves and block coroutines. But when the new VM state is loaded, we don't have to preserve the consistency of the current state anymore. Therefore this patch just flushes the queue allowing the coroutines to finish and removes checking for empty rr queue for load_snapshot function. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <160174521762.12451.15752448887893855757.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06replay: implement replay-seek commandPavel Dovgalyuk1-0/+87
This patch adds hmp/qmp commands replay_seek/replay-seek that proceed the execution to the specified instruction count. The command automatically loads nearest snapshot and replays the execution to find the desired instruction count. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Acked-by: Markus Armbruster <armbru@redhat.com> -- v4 changes: - fixed HMP command description indent - removed useless error_free call Message-Id: <160174521180.12451.14033112911009278753.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06replay: introduce breakpoint at the specified stepPavel Dovgalyuk3-0/+105
This patch introduces replay_break, replay_delete_break qmp and hmp commands. These commands allow stopping at the specified instruction. It may be useful for debugging when there are some known events that should be investigated. replay_break command has one argument - number of instructions executed since the start of the replay. replay_delete_break removes previously set breakpoint. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Acked-by: Markus Armbruster <armbru@redhat.com> -- v4 changes: - removed useless error_free call Message-Id: <160174520606.12451.7056879546045599378.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06replay: introduce info hmp/qmp commandPavel Dovgalyuk2-0/+44
This patch introduces 'info replay' monitor command and corresponding qmp request. These commands request the current record/replay mode, replay log file name, and the instruction count (number of recorded/replayed instructions). The instruction count can be used with the replay_seek/replay_break commands added in the next two patches. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <160174520026.12451.13112161947433306561.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06replay: provide an accessor for rr filenamePavel Dovgalyuk1-0/+5
This patch adds an accessor function for the name of the record/replay log file. Adding an accessor instead of making variable global, prevents accidental modification of this variable by other modules. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <160174517710.12451.17645787545733927488.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05icount: rename functions to be consistent with the module nameClaudio Fontana1-1/+1
Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-05cpu-timers, icount: new modulesClaudio Fontana1-2/+2
refactoring of cpus.c continues with cpu timer state extraction. cpu-timers: responsible for the softmmu cpu timers state, including cpu clocks and ticks. icount: counts the TCG instructions executed. As such it is specific to the TCG accelerator. Therefore, it is built only under CONFIG_TCG. One complication is due to qtest, which uses an icount field to warp time as part of qtest (qtest_clock_warp). In order to solve this problem, provide a separate counter for qtest. This requires fixing assumptions scattered in the code that qtest_enabled() implies icount_enabled(), checking each specific case. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [remove redundant initialization with qemu_spice_init] Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [fix lingering calls to icount_get] Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21meson: convert replay directory to MesonMarc-André Lureau2-10/+12
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26replay: synchronize on every virtual timer callbackPavel Dovgalyuk1-1/+1
Sometimes virtual timer callbacks depend on order of virtual timer processing and warping of virtual clock. Therefore every callback should be logged to make replay deterministic. This patch creates a checkpoint before every virtual timer callback. With these checkpoints virtual timers processing and clock warping events order is completely deterministic. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Acked-by: Alex Bennée <alex.bennee@linaro.org> -- v2: - remove mutex lock/unlock for virtual clock checkpoint since it is not process any asynchronous events (commit ca9759c2a92f528f256fef0e3922416f7bb47bf9) - bump record/replay log file version Message-Id: <159012932716.27256.8854065545365559921.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-12replay: fix replay shutdown for console modePavel Dovgalyuk1-0/+5
When QEMU is used without any graphical window, QEMU execution is terminated with the signal (e.g., Ctrl-C). Signal processing in QEMU does not include qemu_system_shutdown_request call. That is why shutdown event is not recorded by record/replay in this case. This patch adds shutdown event to the end of the record log. Now every replay will shutdown the machine at the end. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <159012995470.27967.18129611453659045726.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10replay: implement fair mutexPavel Dovgalyuk1-1/+14
In record/replay icount mode main loop thread and vCPU thread do not perform simultaneously. They take replay mutex to synchronize the actions. Sometimes vCPU thread waits for locking the mutex for very long time, because main loop releases the mutex and takes it back again. Standard qemu mutex do not provide the ordering capabilities. This patch adds a "queue" for replay mutex. Therefore thread ordering becomes more "fair". Threads are executed in the same order as they are trying to take the mutex. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <158823802979.28101.9340462887738957616.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-07replay: record and replay random number sourcesPavel Dovgalyuk4-2/+49
Record/replay feature of icount allows deterministic running of execution scenarios. Some CPUs and peripheral devices read random numbers from external sources making deterministic execution impossible. This patch adds recording and replaying of random read operations into guest-random module, which is used by the virtual hardware. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <157675984852.14505.15709141760677102489.stgit@pasha-Precision-3630-Tower> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-14replay: add BH oneshot event for block layerPavel Dovgalyuk2-0/+17
Replay is capable of recording normal BH events, but sometimes there are single use callbacks scheduled with aio_bh_schedule_oneshot function. This patch enables recording and replaying such callbacks. Block layer uses these events for calling the completion function. Replaying these calls makes the execution deterministic. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-10-14replay: finish record/replay before closing the disksPavel Dovgalyuk1-0/+2
After recent updates block devices cannot be closed on qemu exit. This happens due to the block request polling when replay is not finished. Therefore now we stop execution recording before closing the block devices. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-08-21Merge remote-tracking branch ↵Peter Maydell2-9/+9
'remotes/kraxel/tags/audio-20190821-pull-request' into staging audio: second batch of -audiodev support, adding support for multiple backends. # gpg: Signature made Wed 21 Aug 2019 09:40:37 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/audio-20190821-pull-request: audio: fix memory leak reported by ASAN audio: use size_t where makes sense audio: remove read and write pcm_ops paaudio: fix playback glitches audio: do not run each backend in audio_run audio: remove audio_MIN, audio_MAX paaudio: properly disconnect streams in fini_* paaudio: do not move stream when sink/source name is specified audio: audiodev= parameters no longer optional when -audiodev present paaudio: prepare for multiple audiodev audio: add audiodev properties to frontends audio: add audiodev property to vnc and wav_capture audio: basic support for multi backend audio audio: reduce glob_audio_state usage audio: Add missing fall through comments Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-21audio: use size_t where makes senseKővágó, Zoltán2-9/+9
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Message-id: c5193e687fc6cc0f60cb3e90fe69ddf2027d0df1.1566168923.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-20replay: rename step-related variables and functionsPavel Dovgalyuk6-26/+26
This patch renames replay_get_current_step() and related variables to make these names consistent with existing 'icount' command line option and future record/replay hmp/qmp commands. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <156404428377.18669.15476429889039912070.stgit@pasha-Precision-3630-Tower> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-20replay: refine replay-time modulePavel Dovgalyuk1-20/+16
This patch removes refactoring artifacts from the replay/replay-time.c Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <156404427799.18669.8072341590511911277.stgit@pasha-Precision-3630-Tower> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-11-08 06:24:58 +0000