aboutsummaryrefslogtreecommitdiff
path: root/qom
AgeCommit message (Collapse)AuthorFilesLines
2017-02-24tcg: drop global lock during TCG code executionJan Kiszka1-0/+10
This finally allows TCG to benefit from the iothread introduction: Drop the global mutex while running pure TCG CPU code. Reacquire the lock when entering MMIO or PIO emulation, or when leaving the TCG loop. We have to revert a few optimization for the current TCG threading model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not kicking it in qemu_cpu_kick. We also need to disable RAM block reordering until we have a more efficient locking mechanism at hand. Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here. These numbers demonstrate where we gain something: 20338 jan 20 0 331m 75m 6904 R 99 0.9 0:50.95 qemu-system-arm 20337 jan 20 0 331m 75m 6904 S 20 0.9 0:26.50 qemu-system-arm The guest CPU was fully loaded, but the iothread could still run mostly independent on a second core. Without the patch we don't get beyond 32206 jan 20 0 330m 73m 7036 R 82 0.9 1:06.00 qemu-system-arm 32204 jan 20 0 330m 73m 7036 S 21 0.9 0:17.03 qemu-system-arm We don't benefit significantly, though, when the guest is not fully loading a host CPU. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com> [FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex] Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> [EGC: fixed iothread lock for cpu-exec IRQ handling] Signed-off-by: Emilio G. Cota <cota@braap.org> [AJB: -smp single-threaded fix, clean commit msg, BQL fixes] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com> [PM: target-arm changes] Acked-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-16report guest crash information in GUEST_PANICKED eventAnton Nefedov1-0/+11
it's not very convenient to use the crash-information property interface, so provide a CPU class callback to get the guest crash information, and pass that information in the event Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Message-Id: <1487053524-18674-3-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-07arm: Correctly handle watchpoints for BE32 CPUsJulian Brown1-0/+6
In BE32 mode, sub-word size watchpoints can fail to trigger because the address of the access is adjusted in the opcode helpers before being compared with the watchpoint registers. This patch reverses the address adjustment before performing the comparison with the help of a new CPUClass hook. This version of the patch augments and tidies up comments a little. Signed-off-by: Julian Brown <julian@codesourcery.com> Message-id: caaf64ffc72f6ae183015337b7afdbd4b8989cb6.1484929304.git.julian@codesourcery.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-31trace: switch to modular code generation for sub-directoriesDaniel P. Berrange1-1/+1
Introduce rules in the top level Makefile that are able to generate trace.[ch] files in every subdirectory which has a trace-events file. The top level directory is handled specially, so instead of creating trace.h, it creates trace-root.h. This allows sub-directories to include the top level trace-root.h file, without ambiguity wrt to the trace.g file in the current sub-dir. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170125161417.31949-7-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-27Introduce DEVICE_CATEGORY_CPU for CPU devicesThomas Huth1-0/+1
Now that CPUs show up in the help text of "-device ?", we should group them into an appropriate category. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1484917276-7107-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-24object: make some funcs staticMarc-André Lureau1-2/+2
There is no need to have those functions as public API. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-01-20Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell2-1/+7
* QOM interface fix (Eduardo) * RTC fixes (Gaohuai, Igor) * Memory leak fixes (Li Qiang, me) * Ctrl-a b regression (Marc-André) * Stubs cleanups and fixes (Leif, me) * hxtool tweak (me) * HAX support (Vincent) * QemuThread, exec.c and SCSI fixes (Roman, Xinhua, me) * PC_COMPAT_2_8 fix (Marcelo) * stronger bitmap assertions (Peter) # gpg: Signature made Fri 20 Jan 2017 12:49:01 GMT # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (35 commits) pc.h: move x-mach-use-reliable-get-clock compat entry to PC_COMPAT_2_8 bitmap: assert that start and nr are non negative Revert "win32: don't run subprocess tests on Mingw32 platform" hax: add Darwin support Plumb the HAXM-based hardware acceleration support target/i386: Add Intel HAX files kvm: move cpu synchronization code KVM: PPC: eliminate unnecessary duplicate constants ramblock-notifier: new char: fix ctrl-a b not working exec: Add missing rcu_read_unlock x86: ioapic: fix fail migration when irqchip=split x86: ioapic: dump version for "info ioapic" x86: ioapic: add traces for ioapic hxtool: emit Texinfo headings as @subsection qemu-thread: fix qemu_thread_set_name() race in qemu_thread_create() serial: fix memory leak in serial exit scsi-block: fix direction of BYTCHK test for VERIFY commands pc: fix crash in rtc_set_memory() if initial cpu is marked as hotplugged acpi: filter based on CONFIG_ACPI_X86 rather than TARGET ... # Conflicts: # include/hw/i386/pc.h
2017-01-19kvm: move cpu synchronization codeVincent Palatin1-1/+1
Move the generic cpu_synchronize_ functions to the common hw_accel.h header, in order to prepare for the addition of a second hardware accelerator. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Message-Id: <f5c3cffe8d520011df1c2e5437bb814989b48332.1484045952.git.vpalatin@chromium.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-17Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell1-0/+2
into staging # gpg: Signature made Mon 16 Jan 2017 13:44:46 GMT # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: trace: Add event "guest_cpu_exit" trace: Fix dynamic event state on vCPU hot-unplug trace: Lock vCPU list when initializing dynamic tracing state trace-events: spelling fix Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-16Merge remote-tracking branch ↵Peter Maydell1-2/+8
'remotes/stsquad/tags/pull-tcg-common-tlb-reset-20170113-r1' into staging This is the same as the v3 posted except a re-base and a few extra signoffs # gpg: Signature made Fri 13 Jan 2017 14:26:46 GMT # gpg: using RSA key 0xFBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-tcg-common-tlb-reset-20170113-r1: cputlb: drop flush_global flag from tlb_flush cpu_common_reset: wrap TCG specific code in tcg_enabled() qom/cpu: move tlb_flush to cpu_common_reset Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-16qom: Make all interface types abstractEduardo Habkost1-0/+6
"qom-list-types abstract=false" currently returns all interface types, as if they were not abstract. Fix this by making sure all interface types are abstract. All interface types have instance_size == 0, so we can use it to set abstract=true on type_initialize(). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1481567461-2341-1-git-send-email-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16trace: Fix dynamic event state on vCPU hot-unplugLluís Vilanova1-0/+2
We need to disable per-vCPU events on a vCPU that is hot-unplugged to keep the dynamic event state global counters consistent. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 148278748055.1404.1570530281528619895.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-13cpu_common_reset: wrap TCG specific code in tcg_enabled()Alex Bennée1-4/+6
Both the cpu->tb_jmp_cache and SoftMMU TLB structures are only used when running TCG code so we might as well skip them for anything else. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-13qom/cpu: move tlb_flush to cpu_common_resetAlex Bennée1-0/+4
It is a common thing amongst the various cpu reset functions want to flush the SoftMMU's TLB entries. This is done either by calling tlb_flush directly or by way of a general memset of the CPU structure (sometimes both). This moves the tlb_flush call to the common reset function and additionally ensures it is only done for the CONFIG_SOFTMMU case and when tcg is enabled. In some target cases we add an empty end_of_reset_fields structure to the target vCPU structure so have a clear end point for any memset which is resetting value in the structure before CPU_COMMON (where the TLB structures are). While this is a nice clean-up in general it is also a precursor for changes coming to cputlb for MTTCG where the clearing of entries can't be done arbitrarily across vCPUs. Currently the cpu_reset function is usually called from the context of another vCPU as the architectural power up sequence is run. By using the cputlb API functions we can ensure the right behaviour in the future. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-12monitor: fix qmp/hmp query-memdev not reporting IDs of memory backendsIgor Mammedov1-0/+6
Considering 'id' is mandatory for user_creatable objects/backends and user_creatable_add_type() always has it as an argument regardless of where from it is called CLI/monitor or QMP, Fix issue by adding 'id' property to hostmem backends and set it in user_creatable_add_type() for every object that implements 'id' property. Then later at query-memdev time get 'id' from object directly. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1484052795-158195-4-git-send-email-imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12monitor: reuse user_creatable_add_opts() instead of user_creatable_add()Igor Mammedov1-54/+17
Simplify code by dropping ~57LOC by merging user_creatable_add() into user_creatable_add_opts() and using the later from monitor. Along with it allocate opts_visitor_new() once in user_creatable_add_opts(). As result we have one less API func and a more readable/simple user_creatable_add_opts() vs user_creatable_add(). Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1484052795-158195-3-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-12qom: remove unused headerIgor Mammedov1-1/+0
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1484052795-158195-2-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-25qapi: rename QmpOutputVisitor to QObjectOutputVisitorDaniel P. Berrange1-1/+1
The QmpOutputVisitor has no direct dependency on QMP. It is valid to use it anywhere that one wants a QObject. Rename it to better reflect its functionality as a generic QAPI to QObject converter. The commit before previous renamed the files, this one renames C identifiers. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1475246744-29302-6-git-send-email-berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Split into file rename and identifier rename] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-25qapi: rename QmpInputVisitor to QObjectInputVisitorDaniel P. Berrange1-1/+1
The QmpInputVisitor has no direct dependency on QMP. It is valid to use it anywhere that one has a QObject. Rename it to better reflect its functionality as a generic QObject to QAPI converter. The previous commit renamed the files, this one renames C identifiers. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1475246744-29302-5-git-send-email-berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Straightforwardly rebased, split into file and identifier rename] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-25qapi: rename *qmp-*-visitor* to *qobject-*-visitor*Daniel P. Berrange2-3/+3
The QMP visitors have no direct dependency on QMP. It is valid to use them anywhere that one has a QObject. Rename them to better reflect their functionality as a generic QObject to QAPI converter. This is the first of three parts: rename the files. The next two parts will rename C identifiers. The split is necessary to make git rename detection work. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Split into file and identifier rename, two comments touched up] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-24exec: call cpu_exec_exit() from a CPU unrealize common functionLaurent Vivier1-1/+7
As cpu_exec_exit() mirrors the cpu_exec_realizefn(), rename it as cpu_exec_unrealizefn(). Create and register a cpu_common_unrealizefn() function for the CPU device class and call cpu_exec_unrealizefn() from this function. Remove cpu_exec_exit() from cpu_common_finalize() (which mirrors init, not realize), and as x86_cpu_unrealizefn() and ppc_cpu_unrealizefn() overwrite the device class unrealize function, add a call to a parent_unrealize pointer. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24exec: split cpu_exec_init()Laurent Vivier1-0/+2
Put in cpu_exec_initfn() what initializes the CPU, and leave in cpu_exec_init() what adds it to the environment. As cpu_exec_initfn() is called by all XX_cpu_initfn(), call it directly in cpu_common_initfn(). cpu_exec_init() is now a realize function, it will be renamed to cpu_exec_realizefn() and moved to the XX_cpu_realizefn() function in a following patch. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-12trace: dynamically allocate trace_dstate in CPUStateDaniel P. Berrange1-2/+5
The CPUState struct has a bitmap tracking which VCPU events are currently active. This is indexed based on the event ID values, and sized according the maximum TraceEventVCPUID enum value. When we start dynamically assigning IDs at runtime, we can't statically declare a bitmap without making an assumption about the max event count. This problem can be solved by dynamically allocating the per-CPU dstate bitmap. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-15-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-04cpu: atomically modify cpu->exit_requestAlex Bennée1-2/+2
ThreadSanitizer picks up potential races although we already use barriers to ensure things are in the correct order when processing exit requests. For true C11 defined behaviour across threads we need to use relaxed atomic_set/atomic_read semantics to reassure tsan. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20160930213106.20186-9-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-04qom/cpu: atomically clear the tb_jmp_cacheAlex Bennée1-1/+5
The ThreadSanitizer rightly complains that something initialised with a normal access is later updated and read atomically. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20160930213106.20186-8-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-04qom/object: update class cache atomicallyAlex Bennée1-7/+8
The idiom CPU_GET_CLASS(cpu) is fairly extensively used in various threads and trips of ThreadSanitizer due to the fact it updates obj->class->object_cast_cache behind the scenes. As this is just a fast-path cache there is no need to lock updates. However to ensure defined C11 behaviour across threads we need to use the plain atomic_read/set primitives and keep the sanitizer happy. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20160930213106.20186-7-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-28trace: Add event "guest_cpu_reset"Lluís Vilanova1-0/+3
Signals the reset of the state a virtual (guest) CPU. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 147428971851.15111.8799439252178273840.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-28trace: Properly initialize dynamic event states in hot-plugged vCPUsLluís Vilanova1-0/+3
Every time a vCPU is hot-plugged, it will "inherit" its tracing state from the global state array. That is, if *any* existing vCPU has an event enabled, new vCPUs will have too. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 147428970768.15111.7664565956870423529.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-19linux-user-i386: Fix crash on cpuidMarc-André Lureau1-0/+5
Running cpuid instructions with a simple run like: i386-linux-user/qemu-i386 tests/tcg/sha1-i386 Results in the following assert: #0 0x00007ffff64246f5 in raise () from /lib64/libc.so.6 #1 0x00007ffff64262fa in abort () from /lib64/libc.so.6 #2 0x00007ffff7937ec5 in g_assertion_message () from /lib64/libglib-2.0.so.0 #3 0x00007ffff7937f5a in g_assertion_message_expr () from /lib64/libglib-2.0.so.0 #4 0x000055555561b54c in apicid_bitwidth_for_count (count=0) at /home/elmarco/src/qemu/include/hw/i386/topology.h:58 #5 0x000055555561b58a in apicid_smt_width (nr_cores=0, nr_threads=0) at /home/elmarco/src/qemu/include/hw/i386/topology.h:67 #6 0x000055555561b5c3 in apicid_core_offset (nr_cores=0, nr_threads=0) at /home/elmarco/src/qemu/include/hw/i386/topology.h:82 #7 0x000055555561b5e3 in apicid_pkg_offset (nr_cores=0, nr_threads=0) at /home/elmarco/src/qemu/include/hw/i386/topology.h:89 #8 0x000055555561dd86 in cpu_x86_cpuid (env=0x555557999550, index=4, count=3, eax=0x7fffffffcae8, ebx=0x7fffffffcaec, ecx=0x7fffffffcaf0, edx=0x7fffffffcaf4) at /home/elmarco/src/qemu/target-i386/cpu.c:2405 #9 0x0000555555638e8e in helper_cpuid (env=0x555557999550) at /home/elmarco/src/qemu/target-i386/misc_helper.c:106 #10 0x000055555599dc5e in static_code_gen_buffer () #11 0x00005555555952f8 in cpu_tb_exec (cpu=0x5555579912d0, itb=0x7ffff4371ab0) at /home/elmarco/src/qemu/cpu-exec.c:166 #12 0x0000555555595c8e in cpu_loop_exec_tb (cpu=0x5555579912d0, tb=0x7ffff4371ab0, last_tb=0x7fffffffd088, tb_exit=0x7fffffffd084, sc=0x7fffffffd0a0) at /home/elmarco/src/qemu/cpu-exec.c:517 #13 0x0000555555595e50 in cpu_exec (cpu=0x5555579912d0) at /home/elmarco/src/qemu/cpu-exec.c:612 #14 0x00005555555c065b in cpu_loop (env=0x555557999550) at /home/elmarco/src/qemu/linux-user/main.c:297 #15 0x00005555555c25b2 in main (argc=2, argv=0x7fffffffd848, envp=0x7fffffffd860) at /home/elmarco/src/qemu/linux-user/main.c:4803 The fields are set in qemu_init_vcpu() with softmmu, but it's a stub with linux-user. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-08-12trace-events: fix first line comment in trace-eventsLaurent Vivier1-1/+1
Documentation is docs/tracing.txt instead of docs/trace-events.txt. find . -name trace-events -exec \ sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \ {} \; Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-26exec: Set cpu_index only if it's not been explictly setIgor Mammedov1-1/+1
It keeps the legacy behavior for all users that doesn't care about stable cpu_index value, but would allow boards that would support device_add/device_del to set stable cpu_index that won't depend on order in which cpus are created/destroyed. While at that simplify cpu_get_free_index() as cpu_index generated by USER_ONLY and softmmu variants is the same since none of the users support cpu-remove so far, except of not yet released spapr/x86 device_add/delr, which will be altered by follow up patches to set stable cpu_index manually. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-18trace: Add per-vCPU tracing states for events with the 'vcpu' propertyLluís Vilanova1-0/+1
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic tracing state of events with the 'vcpu' property. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-07pc: Parse CPU features only onceIgor Mammedov1-1/+0
Considering that features are converted to global properties and global properties are automatically applied to every new instance of created CPU (at object_new() time), there is no point in parsing cpu_model string every time a CPU created. So move parsing outside CPU creation loop and do it only once. Parsing also should be done before any CPU is created so that features would affect the first CPU a well. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-07arm: virt: Parse cpu_model only onceIgor Mammedov1-1/+0
Considering that features are converted to global properties and global properties are automatically applied to every new instance of created CPU (at object_new() time), there is no point in parsing cpu_model string every time a CPU created. So move parsing outside CPU creation loop and do it only once. Parsing also should be done before any CPU is created so that features would affect the first CPU a well. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-07cpu: Use CPUClass->parse_features() as convertor to global propertiesIgor Mammedov1-12/+29
Currently CPUClass->parse_features() is used to parse -cpu features string and set properties on created CPU instances. But considering that features specified by -cpu apply to every created CPU instance, it doesn't make sense to parse the same features string for every CPU created. It also makes every target that cares about parsing features string explicitly call CPUClass->parse_features() parser, which gets in a way if we consider using generic device_add for CPU hotplug as device_add has not a clue about CPU specific hooks. Turns out we can use global properties mechanism to set properties on every created CPU instance for a given type. That way it's possible to convert CPU features into a set of global properties for CPU type specified by -cpu cpu_model and common Device.device_post_init() will apply them to CPU of given type automatically regardless whether it's manually created CPU or CPU created with help of device_add. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-06qapi: Add new visit_complete() functionEric Blake2-21/+17
Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06qmp-output-visitor: Favor new visit_free() functionEric Blake1-1/+1
Now that we have a polymorphic visit_free(), we no longer need qmp_output_visitor_cleanup(); however, we still need to expose the subtype for qmp_output_get_qobject(). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-10-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06string-output-visitor: Favor new visit_free() functionEric Blake1-5/+6
Now that we have a polymorphic visit_free(), we no longer need string_output_visitor_cleanup(); however, we still need to expose the subtype for string_output_get_string(). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-9-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06qmp-input-visitor: Favor new visit_free() functionEric Blake1-5/+4
Now that we have a polymorphic visit_free(), we no longer need qmp_input_visitor_cleanup(); which in turn means we no longer need to return a subtype from qmp_input_visitor_new() nor a public upcast function. Generated code changes to qmp-marshal.c look like: |@@ -52,11 +52,10 @@ void qmp_marshal_add_fd(QDict *args, QOb | { | Error *err = NULL; | AddfdInfo *retval; |- QmpInputVisitor *qiv = qmp_input_visitor_new(QOBJECT(args), true); | Visitor *v; | q_obj_add_fd_arg arg = {0}; | |- v = qmp_input_get_visitor(qiv); |+ v = qmp_input_visitor_new(QOBJECT(args), true); | visit_start_struct(v, NULL, NULL, 0, &err); | if (err) { | goto out; Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-8-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06string-input-visitor: Favor new visit_free() functionEric Blake1-14/+11
Now that we have a polymorphic visit_free(), we no longer need string_input_visitor_cleanup(); which in turn means we no longer need to return a subtype from string_input_visitor_new() nor a public upcast function. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-7-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06opts-visitor: Favor new visit_free() functionEric Blake1-4/+4
Now that we have a polymorphic visit_free(), we no longer need opts_visitor_cleanup(); which in turn means we no longer need to return a subtype from opts_visitor_new() nor a public upcast function. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-6-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06qapi: Add parameter to visit_end_*Eric Blake2-3/+3
Rather than making the dealloc visitor track of stack of pointers remembered during visit_start_* in order to free them during visit_end_*, it's a lot easier to just make all callers pass the same pointer to visit_end_*. The generated code has access to the same pointer, while all other users are doing virtual walks and can pass NULL. The dealloc visitor is then greatly simplified. All three visit_end_*() functions intentionally take a void**, even though the visit_start_*() functions differ between void**, GenericList**, and GenericAlternate**. This is done for several reasons: when doing a virtual walk, passing NULL doesn't care what the type is, but when doing a generated walk, we already have to cast the caller's specific FOO* to call visit_start, while using void** lets us use visit_end without a cast. Also, an upcoming patch will add a clone visitor that wants to use the same implementation for all three visit_end callbacks, which is made easier if all three share the same signature. For visitors with already track per-object state (the QMP visitors via a stack, and the string visitors which do not allow nesting), add an assertion that the caller is indeed passing the same pointer to paired calls. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-4-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-20Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell1-0/+5
into staging # gpg: Signature made Mon 20 Jun 2016 21:29:27 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: (42 commits) trace: split out trace events for linux-user/ directory trace: split out trace events for qom/ directory trace: split out trace events for target-ppc/ directory trace: split out trace events for target-s390x/ directory trace: split out trace events for target-sparc/ directory trace: split out trace events for net/ directory trace: split out trace events for audio/ directory trace: split out trace events for ui/ directory trace: split out trace events for hw/alpha/ directory trace: split out trace events for hw/arm/ directory trace: split out trace events for hw/acpi/ directory trace: split out trace events for hw/vfio/ directory trace: split out trace events for hw/s390x/ directory trace: split out trace events for hw/pci/ directory trace: split out trace events for hw/ppc/ directory trace: split out trace events for hw/9pfs/ directory trace: split out trace events for hw/i386/ directory trace: split out trace events for hw/isa/ directory trace: split out trace events for hw/sd/ directory trace: split out trace events for hw/sparc/ directory ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-20trace: split out trace events for qom/ directoryDaniel P. Berrange1-0/+5
Move all trace-events for files in the qom/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-40-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20error: Remove NULL checks on error_propagate() callsEduardo Habkost1-3/+1
error_propagate() already ignores local_err==NULL, so there's no need to check it before calling. Coccinelle patch used to perform the changes added to scripts/coccinelle/error_propagate_null.cocci. Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1465855078-19435-2-git-send-email-ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-17qom: API to get instance_size of a typeBharata B Rao1-0/+8
Add an API object_type_get_size(const char *typename) that returns the instance_size of the give typename. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-05-12tcg: Remove needless CPUState::current_tbSergey Fedorov1-1/+0
This field was used for telling cpu_interrupt() to unlink a chain of TBs being executed when it worked that way. Now, cpu_interrupt() don't do this anymore. So we don't need this field anymore. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Message-Id: <1462273462-14036-1-git-send-email-sergey.fedorov@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12qapi: Split visit_end_struct() into piecesEric Blake2-16/+12
As mentioned in previous patches, we want to call visit_end_struct() functions unconditionally, so that visitors can release resources tied up since the matching visit_start_struct() without also having to worry about error priority if more than one error occurs. Even though error_propagate() can be safely used to ignore a second error during cleanup caused by a first error, it is simpler if the cleanup cannot set an error. So, split out the error checking portion (basically, input visitors checking for unvisited keys) into a new function visit_check_struct(), which can be safely skipped if any earlier errors are encountered, and leave the cleanup portion (which never fails, but must be called unconditionally if visit_start_struct() succeeded) in visit_end_struct(). Generated code in qapi-visit.c has diffs resembling: |@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v, | goto out_obj; | } | visit_type_ACPIOSTInfo_members(v, obj, &err); |- error_propagate(errp, err); |- err = NULL; |+ if (err) { |+ goto out_obj; |+ } |+ visit_check_struct(v, &err); | out_obj: |- visit_end_struct(v, &err); |+ visit_end_struct(v); | out: and in qapi-event.c: @@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, &param, &err); |- visit_end_struct(v, err ? NULL : &err); |+ if (!err) { |+ visit_check_struct(v, &err); |+ } |+ visit_end_struct(v); | if (err) { | goto out; Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-20-git-send-email-eblake@redhat.com> [Conflict with a doc fixup resolved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-05-12qom: Wrap prop visit in visit_start_structEric Blake1-6/+13
The qmp-input visitor was allowing callers to play rather fast and loose: when visiting a QDict, you could grab members of the root dictionary without first pushing into the dict; the final such culprit was the QOM code for converting to and from object properties. But we are about to tighten the input visitor, at which point user_creatable_add_type() as called with a QMP input visitor via qmp_object_add() MUST follow the same paradigms as everyone else, of pushing into the struct before grabbing its keys. The use of 'err ? NULL : &err' is temporary; a later patch will clean that up when it splits visit_end_struct(). Furthermore, note that both callers always pass qdict, so we can convert the conditional into an assert and reduce indentation. The change has no impact to the testsuite now, but is required to avoid a failure in tests/test-netfilter once qmp-input is made stricter to detect inconsistent 'name' arguments on the root visit. Since user_creatable_add_type() is also called with OptsVisitor through user_creatable_add_opts(), we must also check that there is no negative impact there; both pre- and post-patch, we see: $ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio -object secret,id=sec0,data=letmein,format=raw,foo=bar qemu-system-x86_64: -object secret,id=sec0,data=letmein,format=raw,foo=bar: Property '.foo' not found That is, the only new checking that the new visit_end_struct() can perform is for excess input, but we already catch excess input earlier in object_property_set(). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-10-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-05-12qapi: Use strict QMP input visitor in more placesEric Blake1-0/+1
The following uses of a QMP input visitor should be strict (that is, excess keys in QDict input should be flagged if not converted to QAPI): - Testsuite code unrelated to explicitly testing non-strict mode (test-qmp-commands, test-visitor-serialization); since we want more code to be strict by default, having more tests of strict mode doesn't hurt - Code used for cloning QAPI objects (replay-input.c, qemu-sockets.c); we are reparsing a QObject just barely produced by the qmp output visitor and which therefore should not have any garbage, so while it is extra work to be strict, it validates that our clone is correct [note that a later patch series will simplify these two uses by creating an actual clone visitor that is much more efficient than a generate/reparse cycle] - qmp_object_add(), which calls into user_creatable_add_type(). Since command line parsing for '-object' uses the same user_creatable_add_type() through the OptsVisitor, and that is always strict, we want to ensure that any nested dictionaries would be treated the same in QMP and from the command line (I don't actually know if such nested dictionaries exist). Note that on this code change, strictness only matters for nested dictionaries (if even possible), since we already flag excess input at the top level during an earlier object_property_set() on an unknown key, whether from QemuOpts: $ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio -object secret,id=sec0,data=letmein,format=raw,foo=bar qemu-system-x86_64: -object secret,id=sec0,data=letmein,format=raw,foo=bar: Property '.foo' not found or from QMP: $ ./x86_64-softmmu/qemu-system-x86_64 -nographic -nodefaults -qmp stdio {"QMP": {"version": {"qemu": {"micro": 93, "minor": 5, "major": 2}, "package": ""}, "capabilities": []}} {"execute":"qmp_capabilities"} {"return": {}} {"execute":"object-add","arguments":{"qom-type":"secret","id":"sec0","props":{"format":"raw","data":"letmein","foo":"bar"}}} {"error": {"class": "GenericError", "desc": "Property '.foo' not found"}} The only remaining uses of non-strict input visits are: - QMP 'qom-set' (which eventually executes object_property_set_qobject()) - mark it as something to revisit in the future (I didn't want to spend any more time on this patch auditing if we have any QOM dictionary properties that might be impacted, and couldn't easily prove whether this code path is shared with anything else). - test-qmp-input-visitor: explicit tests of non-strict mode. If we later get rid of users that don't need strictness, then this test should be merged with test-qmp-input-strict Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-7-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
generated by cgit v1.1 at 2024-11-03 09:59:28 +0000