aboutsummaryrefslogtreecommitdiff
path: root/qom/cpu.c
AgeCommit message (Collapse)AuthorFilesLines
2017-03-03Merge branch 'icount-update' into HEADPaolo Bonzini1-1/+1
Merge the original development branch due to breakage caused by the MTTCG merge. Conflicts: cpu-exec.c translate-common.c Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-24tcg: drop global lock during TCG code executionJan Kiszka1-0/+10
This finally allows TCG to benefit from the iothread introduction: Drop the global mutex while running pure TCG CPU code. Reacquire the lock when entering MMIO or PIO emulation, or when leaving the TCG loop. We have to revert a few optimization for the current TCG threading model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not kicking it in qemu_cpu_kick. We also need to disable RAM block reordering until we have a more efficient locking mechanism at hand. Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here. These numbers demonstrate where we gain something: 20338 jan 20 0 331m 75m 6904 R 99 0.9 0:50.95 qemu-system-arm 20337 jan 20 0 331m 75m 6904 S 20 0.9 0:26.50 qemu-system-arm The guest CPU was fully loaded, but the iothread could still run mostly independent on a second core. Without the patch we don't get beyond 32206 jan 20 0 330m 73m 7036 R 82 0.9 1:06.00 qemu-system-arm 32204 jan 20 0 330m 73m 7036 S 21 0.9 0:17.03 qemu-system-arm We don't benefit significantly, though, when the guest is not fully loading a host CPU. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com> [FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex] Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> [EGC: fixed iothread lock for cpu-exec IRQ handling] Signed-off-by: Emilio G. Cota <cota@braap.org> [AJB: -smp single-threaded fix, clean commit msg, BQL fixes] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com> [PM: target-arm changes] Acked-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-22cpu-exec: unify icount_decr and tcg_exit_reqPaolo Bonzini1-1/+1
The icount interrupt flag and tcg_exit_req serve almost the same purpose, let's make them completely the same. The former TB_EXIT_REQUESTED and TB_EXIT_ICOUNT_EXPIRED cases are unified, since we can distinguish them from the value of the interrupt flag. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16report guest crash information in GUEST_PANICKED eventAnton Nefedov1-0/+11
it's not very convenient to use the crash-information property interface, so provide a CPU class callback to get the guest crash information, and pass that information in the event Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Message-Id: <1487053524-18674-3-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-07arm: Correctly handle watchpoints for BE32 CPUsJulian Brown1-0/+6
In BE32 mode, sub-word size watchpoints can fail to trigger because the address of the access is adjusted in the opcode helpers before being compared with the watchpoint registers. This patch reverses the address adjustment before performing the comparison with the help of a new CPUClass hook. This version of the patch augments and tidies up comments a little. Signed-off-by: Julian Brown <julian@codesourcery.com> Message-id: caaf64ffc72f6ae183015337b7afdbd4b8989cb6.1484929304.git.julian@codesourcery.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-31trace: switch to modular code generation for sub-directoriesDaniel P. Berrange1-1/+1
Introduce rules in the top level Makefile that are able to generate trace.[ch] files in every subdirectory which has a trace-events file. The top level directory is handled specially, so instead of creating trace.h, it creates trace-root.h. This allows sub-directories to include the top level trace-root.h file, without ambiguity wrt to the trace.g file in the current sub-dir. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170125161417.31949-7-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-27Introduce DEVICE_CATEGORY_CPU for CPU devicesThomas Huth1-0/+1
Now that CPUs show up in the help text of "-device ?", we should group them into an appropriate category. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1484917276-7107-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-20Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+1
* QOM interface fix (Eduardo) * RTC fixes (Gaohuai, Igor) * Memory leak fixes (Li Qiang, me) * Ctrl-a b regression (Marc-André) * Stubs cleanups and fixes (Leif, me) * hxtool tweak (me) * HAX support (Vincent) * QemuThread, exec.c and SCSI fixes (Roman, Xinhua, me) * PC_COMPAT_2_8 fix (Marcelo) * stronger bitmap assertions (Peter) # gpg: Signature made Fri 20 Jan 2017 12:49:01 GMT # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (35 commits) pc.h: move x-mach-use-reliable-get-clock compat entry to PC_COMPAT_2_8 bitmap: assert that start and nr are non negative Revert "win32: don't run subprocess tests on Mingw32 platform" hax: add Darwin support Plumb the HAXM-based hardware acceleration support target/i386: Add Intel HAX files kvm: move cpu synchronization code KVM: PPC: eliminate unnecessary duplicate constants ramblock-notifier: new char: fix ctrl-a b not working exec: Add missing rcu_read_unlock x86: ioapic: fix fail migration when irqchip=split x86: ioapic: dump version for "info ioapic" x86: ioapic: add traces for ioapic hxtool: emit Texinfo headings as @subsection qemu-thread: fix qemu_thread_set_name() race in qemu_thread_create() serial: fix memory leak in serial exit scsi-block: fix direction of BYTCHK test for VERIFY commands pc: fix crash in rtc_set_memory() if initial cpu is marked as hotplugged acpi: filter based on CONFIG_ACPI_X86 rather than TARGET ... # Conflicts: # include/hw/i386/pc.h
2017-01-19kvm: move cpu synchronization codeVincent Palatin1-1/+1
Move the generic cpu_synchronize_ functions to the common hw_accel.h header, in order to prepare for the addition of a second hardware accelerator. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Message-Id: <f5c3cffe8d520011df1c2e5437bb814989b48332.1484045952.git.vpalatin@chromium.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-17Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell1-0/+2
into staging # gpg: Signature made Mon 16 Jan 2017 13:44:46 GMT # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: trace: Add event "guest_cpu_exit" trace: Fix dynamic event state on vCPU hot-unplug trace: Lock vCPU list when initializing dynamic tracing state trace-events: spelling fix Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-16trace: Fix dynamic event state on vCPU hot-unplugLluís Vilanova1-0/+2
We need to disable per-vCPU events on a vCPU that is hot-unplugged to keep the dynamic event state global counters consistent. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 148278748055.1404.1570530281528619895.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-13cpu_common_reset: wrap TCG specific code in tcg_enabled()Alex Bennée1-4/+6
Both the cpu->tb_jmp_cache and SoftMMU TLB structures are only used when running TCG code so we might as well skip them for anything else. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-13qom/cpu: move tlb_flush to cpu_common_resetAlex Bennée1-0/+4
It is a common thing amongst the various cpu reset functions want to flush the SoftMMU's TLB entries. This is done either by calling tlb_flush directly or by way of a general memset of the CPU structure (sometimes both). This moves the tlb_flush call to the common reset function and additionally ensures it is only done for the CONFIG_SOFTMMU case and when tcg is enabled. In some target cases we add an empty end_of_reset_fields structure to the target vCPU structure so have a clear end point for any memset which is resetting value in the structure before CPU_COMMON (where the TLB structures are). While this is a nice clean-up in general it is also a precursor for changes coming to cputlb for MTTCG where the clearing of entries can't be done arbitrarily across vCPUs. Currently the cpu_reset function is usually called from the context of another vCPU as the architectural power up sequence is run. By using the cputlb API functions we can ensure the right behaviour in the future. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-24exec: call cpu_exec_exit() from a CPU unrealize common functionLaurent Vivier1-1/+7
As cpu_exec_exit() mirrors the cpu_exec_realizefn(), rename it as cpu_exec_unrealizefn(). Create and register a cpu_common_unrealizefn() function for the CPU device class and call cpu_exec_unrealizefn() from this function. Remove cpu_exec_exit() from cpu_common_finalize() (which mirrors init, not realize), and as x86_cpu_unrealizefn() and ppc_cpu_unrealizefn() overwrite the device class unrealize function, add a call to a parent_unrealize pointer. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24exec: split cpu_exec_init()Laurent Vivier1-0/+2
Put in cpu_exec_initfn() what initializes the CPU, and leave in cpu_exec_init() what adds it to the environment. As cpu_exec_initfn() is called by all XX_cpu_initfn(), call it directly in cpu_common_initfn(). cpu_exec_init() is now a realize function, it will be renamed to cpu_exec_realizefn() and moved to the XX_cpu_realizefn() function in a following patch. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-12trace: dynamically allocate trace_dstate in CPUStateDaniel P. Berrange1-2/+5
The CPUState struct has a bitmap tracking which VCPU events are currently active. This is indexed based on the event ID values, and sized according the maximum TraceEventVCPUID enum value. When we start dynamically assigning IDs at runtime, we can't statically declare a bitmap without making an assumption about the max event count. This problem can be solved by dynamically allocating the per-CPU dstate bitmap. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-15-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-04cpu: atomically modify cpu->exit_requestAlex Bennée1-2/+2
ThreadSanitizer picks up potential races although we already use barriers to ensure things are in the correct order when processing exit requests. For true C11 defined behaviour across threads we need to use relaxed atomic_set/atomic_read semantics to reassure tsan. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20160930213106.20186-9-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-04qom/cpu: atomically clear the tb_jmp_cacheAlex Bennée1-1/+5
The ThreadSanitizer rightly complains that something initialised with a normal access is later updated and read atomically. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20160930213106.20186-8-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-28trace: Add event "guest_cpu_reset"Lluís Vilanova1-0/+3
Signals the reset of the state a virtual (guest) CPU. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 147428971851.15111.8799439252178273840.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-28trace: Properly initialize dynamic event states in hot-plugged vCPUsLluís Vilanova1-0/+3
Every time a vCPU is hot-plugged, it will "inherit" its tracing state from the global state array. That is, if *any* existing vCPU has an event enabled, new vCPUs will have too. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 147428970768.15111.7664565956870423529.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-19linux-user-i386: Fix crash on cpuidMarc-André Lureau1-0/+5
Running cpuid instructions with a simple run like: i386-linux-user/qemu-i386 tests/tcg/sha1-i386 Results in the following assert: #0 0x00007ffff64246f5 in raise () from /lib64/libc.so.6 #1 0x00007ffff64262fa in abort () from /lib64/libc.so.6 #2 0x00007ffff7937ec5 in g_assertion_message () from /lib64/libglib-2.0.so.0 #3 0x00007ffff7937f5a in g_assertion_message_expr () from /lib64/libglib-2.0.so.0 #4 0x000055555561b54c in apicid_bitwidth_for_count (count=0) at /home/elmarco/src/qemu/include/hw/i386/topology.h:58 #5 0x000055555561b58a in apicid_smt_width (nr_cores=0, nr_threads=0) at /home/elmarco/src/qemu/include/hw/i386/topology.h:67 #6 0x000055555561b5c3 in apicid_core_offset (nr_cores=0, nr_threads=0) at /home/elmarco/src/qemu/include/hw/i386/topology.h:82 #7 0x000055555561b5e3 in apicid_pkg_offset (nr_cores=0, nr_threads=0) at /home/elmarco/src/qemu/include/hw/i386/topology.h:89 #8 0x000055555561dd86 in cpu_x86_cpuid (env=0x555557999550, index=4, count=3, eax=0x7fffffffcae8, ebx=0x7fffffffcaec, ecx=0x7fffffffcaf0, edx=0x7fffffffcaf4) at /home/elmarco/src/qemu/target-i386/cpu.c:2405 #9 0x0000555555638e8e in helper_cpuid (env=0x555557999550) at /home/elmarco/src/qemu/target-i386/misc_helper.c:106 #10 0x000055555599dc5e in static_code_gen_buffer () #11 0x00005555555952f8 in cpu_tb_exec (cpu=0x5555579912d0, itb=0x7ffff4371ab0) at /home/elmarco/src/qemu/cpu-exec.c:166 #12 0x0000555555595c8e in cpu_loop_exec_tb (cpu=0x5555579912d0, tb=0x7ffff4371ab0, last_tb=0x7fffffffd088, tb_exit=0x7fffffffd084, sc=0x7fffffffd0a0) at /home/elmarco/src/qemu/cpu-exec.c:517 #13 0x0000555555595e50 in cpu_exec (cpu=0x5555579912d0) at /home/elmarco/src/qemu/cpu-exec.c:612 #14 0x00005555555c065b in cpu_loop (env=0x555557999550) at /home/elmarco/src/qemu/linux-user/main.c:297 #15 0x00005555555c25b2 in main (argc=2, argv=0x7fffffffd848, envp=0x7fffffffd860) at /home/elmarco/src/qemu/linux-user/main.c:4803 The fields are set in qemu_init_vcpu() with softmmu, but it's a stub with linux-user. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-26exec: Set cpu_index only if it's not been explictly setIgor Mammedov1-1/+1
It keeps the legacy behavior for all users that doesn't care about stable cpu_index value, but would allow boards that would support device_add/device_del to set stable cpu_index that won't depend on order in which cpus are created/destroyed. While at that simplify cpu_get_free_index() as cpu_index generated by USER_ONLY and softmmu variants is the same since none of the users support cpu-remove so far, except of not yet released spapr/x86 device_add/delr, which will be altered by follow up patches to set stable cpu_index manually. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-18trace: Add per-vCPU tracing states for events with the 'vcpu' propertyLluís Vilanova1-0/+1
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic tracing state of events with the 'vcpu' property. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-07pc: Parse CPU features only onceIgor Mammedov1-1/+0
Considering that features are converted to global properties and global properties are automatically applied to every new instance of created CPU (at object_new() time), there is no point in parsing cpu_model string every time a CPU created. So move parsing outside CPU creation loop and do it only once. Parsing also should be done before any CPU is created so that features would affect the first CPU a well. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-07arm: virt: Parse cpu_model only onceIgor Mammedov1-1/+0
Considering that features are converted to global properties and global properties are automatically applied to every new instance of created CPU (at object_new() time), there is no point in parsing cpu_model string every time a CPU created. So move parsing outside CPU creation loop and do it only once. Parsing also should be done before any CPU is created so that features would affect the first CPU a well. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-07cpu: Use CPUClass->parse_features() as convertor to global propertiesIgor Mammedov1-12/+29
Currently CPUClass->parse_features() is used to parse -cpu features string and set properties on created CPU instances. But considering that features specified by -cpu apply to every created CPU instance, it doesn't make sense to parse the same features string for every CPU created. It also makes every target that cares about parsing features string explicitly call CPUClass->parse_features() parser, which gets in a way if we consider using generic device_add for CPU hotplug as device_add has not a clue about CPU specific hooks. Turns out we can use global properties mechanism to set properties on every created CPU instance for a given type. That way it's possible to convert CPU features into a set of global properties for CPU type specified by -cpu cpu_model and common Device.device_post_init() will apply them to CPU of given type automatically regardless whether it's manually created CPU or CPU created with help of device_add. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-12tcg: Remove needless CPUState::current_tbSergey Fedorov1-1/+0
This field was used for telling cpu_interrupt() to unlink a chain of TBs being executed when it worked that way. Now, cpu_interrupt() don't do this anymore. So we don't need this field anymore. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Message-Id: <1462273462-14036-1-git-send-email-sergey.fedorov@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster1-0/+1
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-23cpu: Clean up includesPeter Maydell1-0/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-11cpu: Add callback to check architectural watchpoint matchSergey Fedorov1-0/+9
When QEMU watchpoint matches, that is not definitely an architectural watchpoint match yet. If it is a stop-before-access watchpoint then that is hardly possible to ignore it after throwing a TCG exception. A special callback is introduced to check for architectural watchpoint match before raising a TCG exception. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1454256948-10485-2-git-send-email-serge.fdrv@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03log: do not unnecessarily include qom/cpu.hPaolo Bonzini1-0/+1
Split the bits that require it to exec/log.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-8-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-01-15dump: qemunotes aren't commonly neededAndrew Jones1-2/+2
Only one of three architectures implementing qmp-dump-guest-memory write qemu notes. And, another architecture (arm/aarch64) is coming, which won't use them either. Make the common implementation truly common. (No functional change.) Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1452542185-10914-3-git-send-email-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-16cpu: Add crash_occurred flag into CPUStateAndrey Smetanin1-0/+1
CPUState::crash_occurred field inside CPUState marks that guest crash occurred. This value is added into cpu common migration subsection. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1435924905-8926-12-git-send-email-den@openvz.org> [Document the new field. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09cpus: protect work list with work_mutexPaolo Bonzini1-0/+1
Protect the list of queued work items with something other than the BQL, as a preparation for running the work items outside it. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09tcg: synchronize cpu->exit_request and cpu->tcg_exit_req accessesPaolo Bonzini1-0/+2
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-14exec: drop cpu_can_do_io, just read cpu->can_do_ioPaolo Bonzini1-1/+1
After commit 626cf8f (icount: set can_do_io outside TB execution, 2014-12-08), can_do_io is set to 1 if not executing code. It is no longer necessary to make this assumption in cpu_can_do_io. It is also possible to remove the use_icount test, simply by never setting cpu->can_do_io to 0 unless use_icount is true. With these changes cpu_can_do_io boils down to a read of cpu->can_do_io. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-09cpu: Convert cpu_index into a bitmapBharata B Rao1-0/+7
Currently CPUState::cpu_index is monotonically increasing and a newly created CPU always gets the next higher index. The next available index is calculated by counting the existing number of CPUs. This is fine as long as we only add CPUs, but there are architectures which are starting to support CPU removal, too. For an architecture like PowerPC which derives its CPU identifier (device tree ID) from cpu_index, the existing logic of generating cpu_index values causes problems. With the currently proposed method of handling vCPU removal by parking the vCPU fd in QEMU (Ref: http://lists.gnu.org/archive/html/qemu-devel/2015-02/msg02604.html), generating cpu_index this way will not work for PowerPC. This patch changes the way cpu_index is handed out by maintaining a bit map of the CPUs that tracks both addition and removal of CPUs. The CPU bitmap allocation logic is part of cpu_exec_init(), which is called by instance_init routines of various CPU targets. Newly added cpu_exec_exit() API handles the deallocation part and this routine is called from generic CPU instance_finalize. Note: This new CPU enumeration is for !CONFIG_USER_ONLY only. CONFIG_USER_ONLY continues to have the old enumeration logic. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> [AF: max_cpus -> MAX_CPUMASK_BITS] Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09cpu: Initialize breakpoint/watchpoint lists in cpu_common_initfn()Eduardo Habkost1-0/+2
One small step in the simplification of cpu_exec_init(). Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-19qom: Fix warning from SparseStefan Weil1-1/+1
Sparse report: qom/cpu.c:99:5: warning: returning void-valued expression Cc: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-18error: Use error_report_err() where appropriateMarkus Armbruster1-2/+1
Coccinelle semantic patch: @@ expression E; @@ - error_report("%s", error_get_pretty(E)); - error_free(E); + error_report_err(E); @@ expression E, S; @@ - error_report("%s", error_get_pretty(E)); + error_report_err(E); ( exit(S); | abort(); ) Trivial manual touch-ups in block/sheepdog.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-12-20cpu: initialize cpu->exception_index on resetPaolo Bonzini1-0/+1
This unbreaks linux-user (broken by e511b4d, cpu-exec: reset exception_index correctly, 2014-11-26). Reported-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Eduardo Habkost <ehabkost@redhat.com> Message-id: 1418989994-17244-2-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-02qom/cpu: remove the unused CPU hot-plug notifierGu Zheng1-10/+0
Remove the unused CPU hot-plug notifier. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2014-09-25qom: Add cpu_exec_interrupt hookRichard Henderson1-0/+6
Continuing the removal of ifdefs from cpu_exec. Cc: Andreas Färber <afaerber@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1410626734-3804-7-git-send-email-rth@twiddle.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-25qom: Add cpu_exec_enter and cpu_exec_exit hooksRichard Henderson1-2/+4
In preparation for removing a bunch of ifdefs from cpu_exec. Cc: Andreas Färber <afaerber@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1410626734-3804-2-git-send-email-rth@twiddle.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-12cpu-exec: Make debug_excp_handler a QOM CPU methodPeter Maydell1-0/+5
Make the debug_excp_handler target specific hook into a QOM CPU method. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-29cpu: introduce CPUClass::virtio_is_big_endian()Greg Kurz1-0/+6
If we want to support targets that can change endianness (modern PPC and ARM for the moment), we need to add a per-CPU class method to be called from the virtio code. The virtio_ prefix in the name is a hint for people to avoid misusage (aka. anywhere but from the virtio code). The default behaviour is to return the compile-time default target endianness. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-13cpu: Move tb_jmp_cache field from CPU_COMMON to CPUStateAndreas Färber1-0/+1
Clear it on reset. Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Move icount_decr field from CPU_COMMON to CPUStateAndreas Färber1-0/+1
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Move icount_extra field from CPU_COMMON to CPUStateAndreas Färber1-0/+1
Reset it. Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Move can_do_io field from CPU_COMMON to CPUStateAndreas Färber1-0/+1
Rename can_do_io() to cpu_can_do_io() and change argument to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de>
generated by cgit v1.1 at 2024-12-29 10:26:59 +0000