aboutsummaryrefslogtreecommitdiff
path: root/qobject
AgeCommit message (Collapse)AuthorFilesLines
2015-11-26qjson: Limit number of tokens in addition to total sizeMarkus Armbruster1-0/+2
Commit 29c75dd "json-streamer: limit the maximum recursion depth and maximum token count" attempts to guard against excessive heap usage by limiting total token size (it says "token count", but that's a lie). Total token size is a rather imprecise predictor of heap usage: many small tokens use more space than few large tokens with the same input size, because there's a constant per-token overhead: 37 bytes on my system. Tighten this up: limit the token count to 2Mi. Chosen to roughly match the 64MiB total token size limit. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1448486613-17634-13-git-send-email-armbru@redhat.com>
2015-11-26qjson: surprise, allocating 6 QObjects per token is expensivePaolo Bonzini2-78/+56
Replace the contents of the tokens GQueue with a simple struct. This cuts the amount of memory allocated by tests/check-qjson from ~500MB to ~20MB, and the execution time from 600ms to 80ms on my laptop. Still a lot (some could be saved by using an intrusive list, such as QSIMPLEQ, instead of the GQueue), but the savings are already massive and the right thing to do would probably be to get rid of json-streamer completely. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1448300659-23559-5-git-send-email-pbonzini@redhat.com> [Straightforwardly rebased on my patches] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-26qjson: store tokens in a GQueuePaolo Bonzini3-56/+36
Even though we still have the "streamer" concept, the tokens can now be deleted as they are read. While doing so convert from QList to GQueue, since the next step will make tokens not a QObject and we will have to do the conversion anyway. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1448300659-23559-4-git-send-email-pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-26qjson: Convert to parser to recursive descentMarkus Armbruster1-118/+47
We backtrack in parse_value(), even though JSON is LL(1) and thus can be parsed by straightforward recursive descent. Do exactly that. Based on an almost-correct patch from Paolo Bonzini. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1448486613-17634-10-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-26qjson: replace QString in JSONLexer with GStringPaolo Bonzini2-18/+13
JSONLexer only needs a simple resizable buffer. json-streamer.c can allocate memory for each token instead of relying on reference counting of QStrings. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1448300659-23559-2-git-send-email-pbonzini@redhat.com> [Straightforwardly rebased on my patches, checkpatch made happy] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-26qjson: Inline token_is_escape() and simplifyMarkus Armbruster1-17/+15
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1448486613-17634-8-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-26qjson: Inline token_is_keyword() and simplifyMarkus Armbruster1-13/+7
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1448486613-17634-7-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-26qjson: Give each of the six structural chars its own token typeMarkus Armbruster3-46/+36
Simplifies things, because we always check for a specific one. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1448486613-17634-6-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-26qjson: Spell out some silent assumptionsMarkus Armbruster1-1/+6
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1448486613-17634-5-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-26qjson: Don't crash when input exceeds nesting limitMarkus Armbruster1-2/+3
We limit nesting depth and input size to defend against input triggering excessive heap or stack memory use (commit 29c75dd json-streamer: limit the maximum recursion depth and maximum token count). However, when the nesting limit is exceeded, parser_context_peek_token()'s assertion fails. Broken in commit 65c0f1e "json-parser: don't replicate tokens at each level of recursion". To reproduce stuff 1025 open braces or brackets into QMP. Fix by taking the error exit instead of the normal one. Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1448486613-17634-3-git-send-email-armbru@redhat.com>
2015-11-26qjson: Apply nesting limit more sanelyMarkus Armbruster1-2/+1
The nesting limit from commit 29c75dd "json-streamer: limit the maximum recursion depth and maximum token count" applies separately to braces and brackets. This makes no sense. Apply it to their sum, because that's actually a measure of recursion depth. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1448486613-17634-2-git-send-email-armbru@redhat.com>
2015-10-29qstring: Make conversion from QObject * accept nullMarkus Armbruster2-10/+5
qobject_to_qstring() crashes on null, which is a trap for the unwary. Return null instead, and simplify a few callers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1444918537-18107-7-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-10-29qlist: Make conversion from QObject * accept nullMarkus Armbruster1-2/+1
qobject_to_qlist() crashes on null, which is a trap for the unwary. Return null instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1444918537-18107-6-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-10-29qfloat qint: Make conversion from QObject * accept nullMarkus Armbruster3-12/+7
qobject_to_qfloat() and qobject_to_qint() crash on null, which is a trap for the unwary. Return null instead, and simplify a few callers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1444918537-18107-5-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-10-29qdict: Make conversion from QObject * accept nullMarkus Armbruster1-3/+3
qobject_to_qdict() crashes on null, which is a trap for the unwary. Return null instead, and simplify a few callers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1444918537-18107-4-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-10-29qbool: Make conversion from QObject * accept nullMarkus Armbruster2-10/+5
qobject_to_qbool() crashes on null, which is a trap for the unwary. Return null instead, and simplify a few callers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1444918537-18107-3-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster1-1/+0
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Finally unused, clean upMarkus Armbruster3-152/+0
Remove it except for two things in qerror.h: * Two #include to be cleaned up separately to avoid cluttering this patch. * The QERR_ macros. Mark as obsolete. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qobject: Use 'bool' inside qdictEric Blake1-2/+2
Now that qbool is fixed, let's fix getting and setting a bool value to a qdict member to also use C99 bool rather than int. I audited all callers to ensure that the changed return type will not cause any changed semantics. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22qobject: Use 'bool' for qboolEric Blake4-10/+10
We require a C99 compiler, so let's use 'bool' instead of 'int' when dealing with boolean values. There are few enough clients to fix them all in one pass. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Alberto Garcia <berto@igalia.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-12qdict: Add qdict_{set,copy}_default()Kevin Wolf1-0/+33
In the block layer functions that determine options for a child block device, it's a common pattern to either copy options from the parent's options or to set a default string if the option isn't explicitly set yet for the child. Provide convenience functions so that it becomes a one-liner for each option. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-12qdict: Add qdict_array_entries()Kevin Wolf1-4/+74
This counts the entries in a flattened array in a QDict without actually splitting the QDict into a QList. bdrv_open_image() doesn't take a QList, but rather a QDict and a key prefix string, so this is more convenient for block drivers which have a dynamically sized list of child nodes (e.g. Quorum) and are to be converted to using bdrv_open_image() as the standard interface for opening child nodes. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-05-11json-parser: Accept 'null' in QMPEric Blake1-0/+2
We document that in QMP, the client may send any json-value for the optional "id" key, and then return that same value on reply (both success and failures, insofar as the failure happened after parsing the id). [Note that the output may not be identical to the input, as whitespace may change and since we may reorder keys within a json-object, but that this still constitutes the same json-value]. However, we were not handling the JSON literal null, which counts as a json-value per RFC 7159. Also, down the road, given the QAPI schema of {'*foo':'str'} or {'*foo':'ComplexType'}, we could decide to allow the QMP client to pass { "foo":null } instead of the current representation of { } where omitting the key is the only way to get at the default NULL value. Such a change might be useful for argument introspection (if a type in older qemu lacks 'foo' altogether, then an explicit "foo":null probe will force an easily distinguished error message for whether the optional "foo" key is even understood in newer qemu). And if we add default values to optional arguments, allowing an explicit null would be required for getting a NULL value associated with an optional string that has a non-null default. But all that can come at a later day. The 'check-unit' testsuite is enhanced to test that parsing produces the same object as explicitly requesting a reference to the special qnull object. In addition, I tested with: $ ./x86_64-softmmu/qemu-system-x86_64 -qmp stdio -nodefaults {"QMP": {"version": {"qemu": {"micro": 91, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}} {"execute":"qmp_capabilities","id":null} {"return": {}, "id": null} {"id":{"a":null,"b":[1,null]},"execute":"quit"} {"return": {}, "id": {"a": null, "b": [1, null]}} {"timestamp": {"seconds": 1427742379, "microseconds": 423128}, "event": "SHUTDOWN"} Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-05-11qobject: Add a special null QObjectMarkus Armbruster3-1/+33
I'm going to fix the JSON parser to recognize null. The obvious representation of JSON null as (QObject *)NULL doesn't work, because the parser already uses it as an error value. Perhaps we should change it to free NULL for null, but that's more than I can do right now. Create a special null QObject instead. The existing QDict, QList, and QString all represent something that is a pointer in C and could therefore be associated with NULL. But right now, all three of these sub-types are always non-null once created, so the new null sentinel object is intentionally unrelated to them. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-05-11qobject: Clean up around qtype_codeMarkus Armbruster1-2/+1
QTYPE_NONE is a sentinel value. No QObject has this type code. Document it properly. Fix dump_qobject() to abort() on QTYPE_NONE, just like for any other invalid type code. Fix to_json() to abort() on all invalid type codes, not just QTYPE_MAX. Clean up Property member qtype's type: it's a qtype_code. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-12-10qjson: Drop trailing space for pretty formattingMax Reitz1-4/+6
For the pretty formatting, the functions converting QDicts and QLists to JSON should not print a space after the comma separating objects, because a newline will emitted immediately afterwards, making the whitespace superfluous. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-23json-lexer: fix escaped backslash in single-quoted stringPaolo Bonzini1-2/+2
This made the lexer wait for a closing *double* quote. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amos Kong <akong@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11json-parser: drop superfluous assignment for token variableGonglei1-13/+2
Signed-off-by: ChenLiang <chenliang88@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-19qdict: Add qdict_join()Max Reitz1-0/+32
This function joins two QDicts by absorbing one into the other. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-04-25qerror.h: Remove QERR defines that are only used onceCole Robinson1-1/+1
Just hardcode them in the callers Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-21qdict: Extract non-QDicts in qdict_array_split()Max Reitz1-14/+46
Currently, qdict_array_split() only splits off entries with a key prefix of "%u.", packing them into a new QDict. This patch makes it support entries with the plain key "%u" as well, directly putting them into the new QList without creating a QDict. If there is both an entry with a key of "%u" and other entries with keys prefixed "%u." (for the same index), the function simply terminates. To do this, this patch also adds a static function which tests whether a given QDict contains any keys with the given prefix. This is used to test whether entries with a key prefixed "%u." do exist in the source QDict without modifying it. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22qapi: extend qdict_flatten() for QListsMax Reitz1-6/+48
Reversing qdict_array_split(), qdict_flatten() should flatten QLists as well by interpreting them as QDicts where every entry's key is its index. This allows bringing QDicts with QLists from QMP commands to the same form as they would be given as command-line options, thereby allowing them to be parsed the same way. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22qdict: Add qdict_array_split()Max Reitz1-0/+37
This function splits a QDict consisting of entries prefixed by incrementally enumerated indices into a QList of QDicts. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-06qerror: Remove assert_no_error()Peter Crosthwaite1-8/+0
This is no longer needed, and is obsoleted by error_abort. Remove. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-12-06Merge remote-tracking branch 'kwolf/tags/for-anthony' into stagingAnthony Liguori1-4/+10
Block patches for 2.0 (flushing block-next) # gpg: Signature made Fri 29 Nov 2013 08:43:18 AM PST using RSA key ID C88F2FD6 # gpg: Can't check signature: public key not found # By Peter Lieven (17) and others # Via Kevin Wolf * kwolf/tags/for-anthony: (41 commits) qemu-iotests: Add sample image and test for VMDK version 3 vmdk: Allow read only open of VMDK version 3 qemu-iotests: Filter out 'qemu-io> ' prompt qemu-iotests: Filter qemu-io output in 025 block: Use BDRV_O_NO_BACKING where appropriate qemu-iotests: Test snapshot mode block: Enable BDRV_O_SNAPSHOT with driver-specific options qemu-iotests: Make test case 030, 040 and 055 deterministic qemu-iotest: Add pause_drive and resume_drive methods blkdebug: add "remove_break" command qemu-iotests: Drop local version of cancel_and_wait from 040 sheepdog: support user-defined redundancy option sheepdog: refactor do_sd_create() qdict: Optimise qdict_do_flatten() qdict: Fix memory leak in qdict_do_flatten() MAINTAINERS: add sheepdog development mailing list COW: Extend checking allocated bits to beyond one sector COW: Speed up writes qapi: Change BlockDirtyInfo to list block: per caller dirty bitmap ... Message-id: 1385743555-27888-1-git-send-email-kwolf@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-02qobject: Fix compiler warning (missing gnu_printf format attribute)Stefan Weil1-2/+2
gcc 4.8.2 reports this warning when extra warnings are enabled (-Wextra): CC qobject/qerror.o qobject/qerror.c: In function ‘qerror_from_info’: qobject/qerror.c:53:5: error: function might be possible candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format] qerr->err_msg = g_strdup_vprintf(fmt, *va); ^ Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-11-29qdict: Optimise qdict_do_flatten()Kevin Wolf1-3/+7
Nested QDicts used to be both entered recursively in order to move their entries to the target QDict and also be moved themselves to the target QDict like all other objects. This is harmless because for the top level, qdict_do_flatten() will encounter the (now empty) QDict for a second time and then delete it, but at the same time it's obviously unnecessary overhead. Just delete nested QDicts directly after moving all of their entries. Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-29qdict: Fix memory leak in qdict_do_flatten()Kevin Wolf1-1/+3
Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-25qdict: Extract qdict_extract_subqdictBenoît Canet1-0/+21
Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-26Implement qdict_flatten()Kevin Wolf1-0/+51
qdict_flatten(): For each nested QDict with key x, all fields with key y are moved to this QDict and their key is renamed to "x.y". This operation is applied recursively for nested QDicts. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-07-26qapi: Anonymous unionsKevin Wolf1-0/+2
The discriminator for anonymous unions is the data type. This allows to have a union type that allows both of these: { 'file': 'my_existing_block_device_id' } { 'file': { 'filename': '/tmp/mydisk.qcow2', 'read-only': true } } Unions like this are specified in the schema with an empty dict as discriminator. For this example you could take: { 'union': 'BlockRef', 'discriminator': {}, 'data': { 'definition': 'BlockOptions', 'reference': 'str' } } { 'type': 'ExampleObject', 'data: { 'file': 'BlockRef' } } Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-05-23json-parser: fix handling of large whole number valuesMichael Roth1-3/+23
Currently our JSON parser assumes that numbers lacking a fractional value are integers and attempts to store them as QInt/int64 values. This breaks in the case where the number overflows/underflows int64 values (which is still valid JSON) Fix this by detecting such cases and using a QFloat to store the value instead. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Amos Kong <akong@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-04-13qjson: to_json() case QTYPE_QSTRING is buggy, rewriteMarkus Armbruster1-57/+45
Known bugs in to_json(): * A start byte for a three-byte sequence followed by less than two continuation bytes is split into one-byte sequences. * Start bytes for sequences longer than three bytes get misinterpreted as start bytes for three-byte sequences. Continuation bytes beyond byte three become one-byte sequences. This means all characters outside the BMP are decoded incorrectly. * One-byte sequences with the MSB are put into the JSON string verbatim when char is unsigned, producing invalid UTF-8. When char is signed, they're replaced by "\\uFFFF" instead. This includes \xFE, \xFF, and stray continuation bytes. * Overlong sequences are happily accepted, unless screwed up by the bugs above. * Likewise, sequences encoding surrogate code points or noncharacters. * Unlike other control characters, ASCII DEL is not escaped. Except in overlong encodings. My rewrite fixes them as follows: * Malformed UTF-8 sequences are replaced. Except the overlong encoding \xC0\x80 of U+0000 is still accepted. Permits embedding NUL characters in C strings. This trick is known as "Modified UTF-8". * Sequences encoding code points beyond Unicode range are replaced. * Sequences encoding code points beyond the BMP produce a surrogate pair. * Sequences encoding surrogate code points are replaced. * Sequences encoding noncharacters are replaced. * ASCII DEL is now always escaped. The replacement character is U+FFFD. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-04-05qstring: add qstring_get_length()Luiz Capitulino1-0/+8
Long overdue. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2013-03-15Add qdict_clone_shallow()Kevin Wolf1-0/+22
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-12build: move qobject files to qobject/ and libqemuutil.aPaolo Bonzini12-0/+2622
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-12-28 16:31:03 +0000