aboutsummaryrefslogtreecommitdiff
path: root/qmp.c
AgeCommit message (Collapse)AuthorFilesLines
2018-07-16cli qmp: Mark --preconfig, exit-preconfig experimentalMarkus Armbruster1-1/+1
Committing to the current --preconfig / exit-preconfig interface before it has seen any use is premature. Mark both as experimental, the former in documentation, the latter by renaming it to x-exit-preconfig. See the previous commit for more detailed rationale. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180705091402.26244-3-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> [Straightforward conflict with commit 514337c142f resolved]
2018-07-05Merge remote-tracking branch ↵Peter Maydell1-16/+0
'remotes/armbru/tags/pull-monitor-2018-07-03-v2' into staging Monitor patches for 2018-07-03 # gpg: Signature made Tue 03 Jul 2018 22:20:13 BST # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-monitor-2018-07-03-v2: (32 commits) qapi: Polish command flags documentation in qapi-code-gen.txt monitor: Improve some comments qmp: Clean up capability negotiation after commit 02130314d8c qobject: Let qobject_from_jsonf() fail instead of abort qmp: Switch timestamp_put() to qdict_from_jsonf_nofail() qmp: Add some comments around null responses qmp: Simplify monitor_qmp_respond() qmp: Replace get_qmp_greeting() by qmp_greeting() qmp: Replace monitor_json_emitter{,raw}() by qmp_{queue,send}_response() qmp: Use QDict * instead of QObject * for response objects qmp: De-duplicate error response building qobject: New qdict_from_jsonf_nofail() monitor: Peel off @mon_global wrapper monitor: Rename use_io_thr to use_io_thread qmp: Don't let JSON errors jump the queue qmp: Don't let malformed in-band commands jump the queue tests/qmp-test: Demonstrate QMP errors jumping the queue qmp: Simplify code around monitor_qmp_dispatch_one() qmp: Always free QMPRequest with qmp_request_free() qmp: Revert change to handle_qmp_command tracepoint ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-03qmp: Get rid of x-oob-test commandMarkus Armbruster1-16/+0
tests/qmp-test tests an out-of-band command overtaking a slow in-band command. To do that, it needs: 1. An in-band command that *reliably* takes long enough to be overtaken. 2. An out-of-band command to do the overtaking. 3. To avoid delays, a way to make the in-band command complete quickly after it was overtaken. To satisfy these needs, commit 469638f9cb3 provides the rather peculiar oob-capable QMP command x-oob-test: * With "lock": true, it waits for a global semaphore. * With "lock": false, it signals the global semaphore. To satisfy 1., the test runs x-oob-test in-band with "lock": true. To satisfy 2. and 3., it runs x-oob-test out-of-band with "lock": false. Note that waiting for a semaphore violates the rules for oob-capable commands. Running x-oob-test with "lock": true hangs the monitor until you run x-oob-test with "lock": false on another monitor (which you might not have set up). Having an externally visible QMP command that may hang the monitor is not nice. Let's apply a little more ingenuity to the problem. Idea: have an existing command block on reading a FIFO special file, unblock it by opening the FIFO for writing. For 1., use {"execute": "blockdev-add", "id": ID1, "arguments": { "driver": "blkdebug", "node-name": ID1, "config": FIFO, "image": { "driver": "null-co"}}} where ID1 is an arbitrary string, and FIFO is the name of the FIFO. For 2., use {"execute": "migrate-pause", "id": ID2, "control": {"run-oob": true}} where ID2 is a different arbitrary string. Since there's no migration to pause, the command will fail, but that's fine; instant failure is still a test of out-of-band responses overtaking in-band commands. For 3., open FIFO for writing. Drop QMP command x-oob-test. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-6-armbru@redhat.com> [Error checking tweaked]
2018-07-03qapi: add conditions to SPICE type/commands/events on the schemaMarc-André Lureau1-16/+0
Add #if defined(CONFIG_SPICE) in generated code, and adjust the qmp/hmp code accordingly. query-qmp-schema no longer reports the command/events etc as available when disabled at compile time. Commands made conditional: * query-spice Before the patch, the command for !CONFIG_SPICE is unregistered. It will fail with the same error. Events made conditional: * SPICE_CONNECTED, SPICE_INITIALIZED, SPICE_DISCONNECTED, SPICE_MIGRATE_COMPLETED Add TODO for conditional SPICE chardevs, delayed until the supports for conditional members lands. No HMP change, the code was already conditional. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-15-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03qapi: add conditions to VNC type/commands/events on the schemaMarc-André Lureau1-26/+4
Add #if defined(CONFIG_VNC) in generated code, and adjust the qmp/hmp code accordingly. query-qmp-schema no longer reports the command/events etc as available when disabled at compile. Commands made conditional: * query-vnc, query-vnc-servers, change-vnc-password Before the patch, the commands for !CONFIG_VNC are stubs that fail like this: {"error": {"class": "GenericError", "desc": "The feature 'vnc' is not enabled"}} Afterwards, they fail like this: {"error": {"class": "CommandNotFound", "desc": "The command FOO has not been found"}} I call that an improvement, because it lets clients distinguish between command unavailable (class CommandNotFound) and command failed (class GenericError). Events made conditional: * VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED HMP change: * info vnc Will return "unknown command: 'info vnc'" when VNC is compiled out (same as error for spice when --disable-spice) Occurrences of VNC (case insensitive) in the schema that aren't covered by this change: * add_client Command has other uses, including "socket bases character devices". These are unconditional as far as I can tell. * set_password, expire_password In theory, these commands could be used for managing any service's password. In practice, they're used for VNC and SPICE services. They're documented for "remote display session" / "remote display server". The service is selected by argument @protocol. The code special-cases protocol-specific argument checking, then calls a protocol-specific function to do the work. If it fails, the command fails with "Could not set password". It does when the service isn't compiled in (it's a stub then). We could make these commands conditional on the conjunction of all services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)], but I doubt it's worthwhile. * change Command has other uses, namely changing media. This patch inlines a stub; no functional change. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-05-30cli: add --preconfig optionIgor Mammedov1-0/+10
This option allows pausing QEMU in the new RUN_STATE_PRECONFIG state, allowing the configuration of QEMU from QMP before the machine jumps into board initialization code of machine_run_board_init() The intent is to allow management to query machine state and additionally configure it using previous query results within one QEMU instance (i.e. eliminate the need to start QEMU twice, 1st to query board specific parameters and 2nd for actual VM start using query results for additional parameters). The new option complements -S option and could be used with or without it. The difference is that -S pauses QEMU when the machine is completely initialized with all devices wired up and ready to execute guest code (QEMU needs only to unpause VCPUs to let guest execute its code), while the "preconfig" option pauses QEMU early before board specific init callback (machine_run_board_init) is executed and allows the configuration of machine parameters which will be used by board init code. When early introspection/configuration is done, command 'exit-preconfig' should be used to exit RUN_STATE_PRECONFIG and transition to the next requested state (i.e. if -S is used then QEMU will pause the second time when board/device initialization is completed or start guest execution if -S isn't provided on CLI) PS: Initially 'preconfig' is planned to be used for configuring numa topology depending on board specified possible cpus layout. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1526059483-42847-1-git-send-email-imammedo@redhat.com> [ehabkost: Changed "since 2.13" to "since 3.0"] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-05-07pc-dimm: factor out MemoryDevice interfaceDavid Hildenbrand1-2/+2
On the qmp level, we already have the concept of memory devices: "query-memory-devices" Right now, we only support NVDIMM and PCDIMM. We want to map other devices later into the address space of the guest. Such device could e.g. be virtio devices. These devices will have a guest memory range assigned but won't be exposed via e.g. ACPI. We want to make them look like memory device, but not glued to pc-dimm. Especially, it will not always be possible to have TYPE_PC_DIMM as a parent class (e.g. virtio devices). Let's use an interface instead. As a first part, convert handling of - qmp_pc_dimm_device_list - get_plugged_memory_size to our new model. plug/unplug stuff etc. will follow later. A memory device will have to provide the following functions: - get_addr(): Necessary, as the property "addr" can e.g. not be used for virtio devices (already defined). - get_plugged_size(): The amount this device offers to the guest as of now. - get_region_size(): Because this can later on be bigger than the plugged size. - fill_device_info(): Fill MemoryDeviceInfo, e.g. for qmp. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180423165126.15441-2-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-05-04qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREFMarc-André Lureau1-2/+2
Now that we can safely call QOBJECT() on QObject * as well as its subtypes, we can have macros qobject_ref() / qobject_unref() that work everywhere instead of having to use QINCREF() / QDECREF() for QObject and qobject_incref() / qobject_decref() for its subtypes. The replacement is mechanical, except I broke a long line, and added a cast in monitor_qmp_cleanup_req_queue_locked(). Unlike qobject_decref(), qobject_unref() doesn't accept void *. Note that the new macros evaluate their argument exactly once, thus no need to shout them. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Rebased, semantic conflict resolved, commit message improved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-03-20Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-6/+1
virtio,vhost,pci,pc: features, cleanups SRAT tables for DIMM devices new virtio net flags for speed/duplex post-copy migration support in vhost cleanups in pci Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 20 Mar 2018 14:40:43 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (51 commits) postcopy shared docs libvhost-user: Claim support for postcopy postcopy: Allow shared memory vhost: Huge page align and merge vhost+postcopy: Wire up POSTCOPY_END notify vhost-user: Add VHOST_USER_POSTCOPY_END message libvhost-user: mprotect & madvises for postcopy vhost+postcopy: Call wakeups vhost+postcopy: Add vhost waker postcopy: postcopy_notify_shared_wake postcopy: helper for waking shared vhost+postcopy: Resolve client address postcopy-ram: add a stub for postcopy_request_shared_page vhost+postcopy: Helper to send requests to source for shared pages vhost+postcopy: Stash RAMBlock and offset vhost+postcopy: Send address back to qemu libvhost-user+postcopy: Register new regions with the ufd migration/ram: ramblock_recv_bitmap_test_byte_offset postcopy+vhost-user: Split set_mem_table for postcopy vhost+postcopy: Transmit 'listen' to slave ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # scripts/update-linux-headers.sh
2018-03-20pc-dimm: make qmp_pc_dimm_device_list() sort devices by addressHaozhong Zhang1-6/+1
Make qmp_pc_dimm_device_list() return sorted by start address list of devices so that it could be reused in places that would need sorted list*. Reuse existing pc_dimm_built_list() to get sorted list. While at it hide recursive callbacks from callers, so that: qmp_pc_dimm_device_list(qdev_get_machine(), &list); could be replaced with simpler: list = qmp_pc_dimm_device_list(); * follow up patch will use it in build_srat() Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> for ppc part Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-19qmp: add command "x-oob-test"Peter Xu1-0/+16
This command is only used to test OOB functionality. It should not be used for any other purposes. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180309090006.10018-22-peterx@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: grammar tweak] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-19qapi: Replace qobject_to_X(o) by qobject_to(X, o)Max Reitz1-1/+1
This patch was generated using the following Coccinelle script: @@ expression Obj; @@ ( - qobject_to_qnum(Obj) + qobject_to(QNum, Obj) | - qobject_to_qstring(Obj) + qobject_to(QString, Obj) | - qobject_to_qdict(Obj) + qobject_to(QDict, Obj) | - qobject_to_qlist(Obj) + qobject_to(QList, Obj) | - qobject_to_qbool(Obj) + qobject_to(QBool, Obj) ) and a bit of manual fix-up for overly long lines and three places in tests/check-qjson.c that Coccinelle did not find. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-Id: <20180224154033.29559-4-mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: swap order from qobject_to(o, X), rebase to master, also a fix to latent false-positive compiler complaint about hw/i386/acpi-build.c] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-06qmp: Add qom-list-properties to list QOM object propertiesAlexey Kardashevskiy1-0/+49
There is already 'device-list-properties' which does most of the job, however it does not handle everything returned by qom-list-types such as machines as they inherit directly from TYPE_OBJECT and not TYPE_DEVICE. It does not handle abstract classes either. This adds a new qom-list-properties command which prints properties of a specific class and its instance. It is pretty much a simplified copy of the device-list-properties handler. Since it creates an object instance, device properties should appear in the output as they are copied to QOM properties at the instance_init hook. This adds a object_class_property_iter_init() helper to allow class properties enumeration uses it in the new QMP command to allow properties listing for abstract classes. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20180301130939.15875-3-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06qmp: Merge ObjectPropertyInfo and DevicePropertyInfoAlexey Kardashevskiy1-10/+10
ObjectPropertyInfo is more generic and only missing @description. This adds a description to ObjectPropertyInfo and removes DevicePropertyInfo so the resulting ObjectPropertyInfo can be used elsewhere. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20180301130939.15875-2-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-02Fix up dangling references to qmp-commands.* in comment and docMarkus Armbruster1-7/+7
Fix up the reference to qmp-commands.hx in qmp.c. Missed in commit 5032a16d1d. Fix up the reference to qmp-commands.txt in docs/xen-save-devices-state.txt. Missed in commit 4d8bb958fa. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-29-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02qapi: Empty out qapi-schema.jsonMarkus Armbruster1-1/+3
The previous commit improved compile time by including less of the generated QAPI headers. This is impossible for stuff defined directly in qapi-schema.json, because that ends up in headers that that pull in everything. Move everything but include directives from qapi-schema.json to new sub-module qapi/misc.json, then include just the "misc" shard where possible. It's possible everywhere, except: * monitor.c needs qmp-command.h to get qmp_init_marshal() * monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need qapi-event.h to get enum QAPIEvent Perhaps we'll get rid of those some other day. Adding a type to qapi/migration.json now recompiles some 120 instead of 2300 out of 5100 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-25-armbru@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster1-0/+1
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09Include qapi/qmp/qdict.h exactly where neededMarkus Armbruster1-0/+1
This cleanup makes the number of objects depending on qapi/qmp/qdict.h drop from 4550 (out of 4743) to 368 in my "build everything" tree. For qapi/qmp/qobject.h, the number drops from 4552 to 390. While there, separate #include from file comment with a blank line. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09Include qapi/qmp/qobject.h exactly where neededMarkus Armbruster1-1/+0
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-11-armbru@redhat.com>
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster1-0/+1
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2017-12-20qmp: remove qmp_cpuDaniel Henrique Barboza1-5/+0
'qmp_cpu' was implemented in commit 755f196898 ("qapi: Convert the cpu command") as a functional no-op, a QMP call that does nothing and return success. The idea, apparently, was to provide a counterpart for the HMP 'hmp_cpu' command, introduced in the same commit. After 6 years of its creation, qmp_cpu remains a functional no-op that does nothing, having no value for any caller/user. A proposal was sent to implement qmp_cpu like hmp_cpu works, but it was denied [1]. The reason is that QMP must be as stateless as possible and a function that changes its state (the current CPU monitor in the case of qmp_cpu) goes against it. Any QMP command that needs a specific monitor CPU setup must provide it in its arguments, instead of relying in the current QMP monitor state. After discussions that happened in [2] it was decided that a command that does nothing since its birth, no one uses for anything and will not be implemented, should be deprecated and erased. Given that we will *not* provide any replacement for qmp_cpu and we believe that there is no user relying on it, there is no point in adding a deprecation delay for it. So, this patch nukes qmp_cpu from QEMU code, removing both its blank implementation in qmp.c and its doc in qapi-schema.json. [1] https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg02283.html [2] https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg03696.html Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20171220102304.8288-1-danielhb@linux.vnet.ibm.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-09-14qmp: introduce query-memory-size-summary commandVadim Galitsyn1-0/+13
Add a new query-memory-size-summary command which provides the following memory information in bytes: * base-memory - size of "base" memory specified with command line option -m. * plugged-memory - amount of memory that was hot-plugged. If target does not have CONFIG_MEM_HOTPLUG enabled, no value is reported. Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com> Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com> Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com> Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: qemu-devel@nongnu.org Message-Id: <20170829153022.27004-3-vadim.galitsyn@profitbricks.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixup comments as per Igor's review Added 'of' from Vadim's reply
2017-07-17qmp: Include parent type on 'qom-list-types' outputEduardo Habkost1-0/+5
Include name of parent type of each type on 'qom-list-types' output. Without this, there's no way to figure out the parents of a given type without making additional 'qom-list-types' queries. In addition to the test case for the new feature, update the abstract-interface test case to use the new field and avoid the "qom-list-types implements=object" trick. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170707122215.8819-4-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-07-17qmp: Include 'abstract' field on 'qom-list-types' outputEduardo Habkost1-0/+1
A client may be interested in getting the list of both abstract and non-abstract types. Instead of requiring them to make multiple queries with different filter arguments, just return an 'abstract' field in 'qom-list-types'. In addition to the new test code for validating this field, update the abstract-interfaces test case to query for all 'interface' subtypes (including abstract ones), and to look at the 'abstract' field directly. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170707122215.8819-3-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-07-14qmp: Use ObjectProperty.type if presentFam Zheng1-1/+2
The dynamic value is more informative in the case of link property, otherwise it is the same. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170714021509.23681-5-famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14qdev: Introduce PropertyInfo.createFam Zheng1-1/+1
This allows property implementation to provide a specialized property creation method. Update conditions guarding property types accordingly. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170714021509.23681-3-famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-11block: rip out all traces of password promptingDaniel P. Berrange1-11/+1
Now that qcow & qcow2 are wired up to get encryption keys via the QCryptoSecret object, nothing is relying on the interactive prompting for passwords. All the code related to password prompting can thus be ripped out. Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-17-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-02chardev: move headers to include/chardevMarc-André Lureau1-1/+1
So they are all in one place. The following patch will move serial & parallel declarations to the respective headers. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-05-23shutdown: Add source information to SHUTDOWN and RESETEric Blake1-2/+2
Time to wire up all the call sites that request a shutdown or reset to use the enum added in the previous patch. It would have been less churn to keep the common case with no arguments as meaning guest-triggered, and only modified the host-triggered code paths, via a wrapper function, but then we'd still have to audit that I didn't miss any host-triggered spots; changing the signature forces us to double-check that I correctly categorized all callers. Since command line options can change whether a guest reset request causes an actual reset vs. a shutdown, it's easy to also add the information to reset requests. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts] Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part] Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts] Message-Id: <20170515214114.15442-5-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-11block: New BdrvChildRole.activate() for blk_resume_after_migration()Kevin Wolf1-6/+0
Instead of manually calling blk_resume_after_migration() in migration code after doing bdrv_invalidate_cache_all(), integrate the BlockBackend activation with cache invalidation into a single function. This is achieved with a new callback in BdrvChildRole that is called by bdrv_invalidate_cache_all(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-05-11migration: Unify block node activation error handlingKevin Wolf1-9/+9
Migration code activates all block driver nodes on the destination when the migration completes. It does so by calling bdrv_invalidate_cache_all() and blk_resume_after_migration(). There is one code path for precopy and one for postcopy migration, resulting in four function calls, which used to have three different failure modes. This patch unifies the behaviour so that failure to activate all block nodes is non-fatal, but the error message is logged and the VM isn't automatically started. 'cont' will retry activating the block nodes. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-04-21qdev: remove cannot_destroy_with_object_finalize_yetLaurent Vivier1-5/+0
As all users have been removed, we can remove cannot_destroy_with_object_finalize_yet field from the DeviceClass structure. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20170414083717.13641-5-lvivier@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-07block: Ignore guest dev permissions during incoming migrationKevin Wolf1-0/+6
Usually guest devices don't like other writers to the same image, so they use blk_set_perm() to prevent this from happening. In the migration phase before the VM is actually running, though, they don't have a problem with writes to the image. On the other hand, storage migration needs to be able to write to the image in this phase, so the restrictive blk_set_perm() call of qdev devices breaks it. This patch flags all BlockBackends with a qdev device as blk->disable_perm during incoming migration, which means that the requested permissions are stored in the BlockBackend, but not actually applied to its root node yet. Once migration has finished and the VM should be resumed, the permissions are applied. If they cannot be applied (e.g. because the NBD server used for block migration hasn't been shut down), resuming the VM fails. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
2017-03-05qapi: Drop unused non-strict qobject input visitorMarkus Armbruster1-1/+1
The split between tests/test-qobject-input-visitor.c and tests/test-qobject-input-strict.c now makes less sense than ever. The next commit will take care of that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-20-git-send-email-armbru@redhat.com>
2017-01-31char: headers clean-upMarc-André Lureau1-0/+1
Those could probably be squashed with earlier patches, however I couldn't easily identify them, test them or check if there are still necessary on various platforms. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-01-27char: rename CharDriverState ChardevMarc-André Lureau1-1/+1
Pick a uniform chardev type name. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27qmp: Fix argument name in error message of device-list-propertiesLin Ma1-2/+2
The argument is called "typename", not "name". [Thanks to Markus for correcting the commit message] Signed-off-by: Lin Ma <lma@suse.com> Message-Id: <20170125052703.23571-1-lma@suse.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-28clean-up: removed duplicate #includesAnand J1-1/+0
Some files contain multiple #includes of the same header file. Removed most of those unnecessary duplicate entries using scripts/clean-includes. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Anand J <anand.indukala@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-25qapi: rename QmpInputVisitor to QObjectInputVisitorDaniel P. Berrange1-1/+1
The QmpInputVisitor has no direct dependency on QMP. It is valid to use it anywhere that one has a QObject. Rename it to better reflect its functionality as a generic QObject to QAPI converter. The previous commit renamed the files, this one renames C identifiers. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1475246744-29302-5-git-send-email-berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Straightforwardly rebased, split into file and identifier rename] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-25qapi: rename *qmp-*-visitor* to *qobject-*-visitor*Daniel P. Berrange1-1/+1
The QMP visitors have no direct dependency on QMP. It is valid to use them anywhere that one has a QObject. Rename them to better reflect their functionality as a generic QObject to QAPI converter. This is the first of three parts: rename the files. The next two parts will rename C identifiers. The split is necessary to make git rename detection work. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Split into file and identifier rename, two comments touched up] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-06qmp: fix object-add assert() without propsMarc-André Lureau1-2/+6
Since commit ad739706bbadee49, user_creatable_add_type() expects to be given a qdict. However, if object-add is called without props, you reach the assert: "qemu/qom/object_interfaces.c:115: user_creatable_add_type: Assertion `qdict' failed.", because the qdict isn't created in this case (it's optional). Furthermore, qmp_input_visitor_new() is not meant to be called without a dict, and a further commit will assert in this situation. If none given, create an empty qdict in qmp to avoid the user_creatable_add_type() assert(qdict). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20160922203927.28241-2-marcandre.lureau@redhat.com> Tested-by: Xiao Long Jiang <zxiaol@linux.vnet.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-23Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell1-2/+2
Block layer patches # gpg: Signature made Fri 23 Sep 2016 12:59:46 BST # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (33 commits) block: Remove BB interface from blockdev-add/del qemu-iotests/141: Avoid blockdev-add with id block: Avoid printing NULL string in error messages qemu-iotests/139: Avoid blockdev-add with id qemu-iotests/124: Avoid blockdev-add with id qemu-iotests/118: Avoid blockdev-add with id qemu-iotests/117: Avoid blockdev-add with id qemu-iotests/087: Avoid blockdev-add with id qemu-iotests/081: Avoid blockdev-add with id qemu-iotests/071: Avoid blockdev-add with id qemu-iotests/067: Avoid blockdev-add with id qemu-iotests/041: Avoid blockdev-add with id qemu-iotests/118: Test media change with qdev name block: Accept device model name for block_set_io_throttle block: Accept device model name for blockdev-change-medium block: Accept device model name for eject block: Accept device model name for x-blockdev-remove-medium block: Accept device model name for x-blockdev-insert-medium block: Accept device model name for blockdev-open/close-tray qdev-monitor: Add blk_by_qdev_id() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-23block: Accept device model name for blockdev-change-mediumKevin Wolf1-2/+2
In order to remove the need for BlockBackend names in the external API, we want to allow qdev device names in all device related commands. This converts blockdev-change-medium to accept a qdev device name. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23vl: Switch qemu_uuid to QemuUUIDFam Zheng1-8/+2
Update all qemu_uuid users as well, especially get rid of the duplicated low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API. Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to QemuUUID is done here too to keep everything in sync and avoid code churn. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
2016-09-23util: Add UUID APIFam Zheng1-0/+1
A number of different places across the code base use CONFIG_UUID. Some of them are soft dependency, some are not built if libuuid is not available, some come with dummy fallback, some throws runtime error. It is hard to maintain, and hard to reason for users. Since UUID is a simple standard with only a small number of operations, it is cleaner to have a central support in libqemuutil. This patch adds qemu_uuid_* functions that all uuid users in the code base can rely on. Except for qemu_uuid_generate which is new code, all other functions are just copy from existing fallbacks from other files. Note that qemu_uuid_parse is moved without updating the function signature to use QemuUUID, to keep this patch simple. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-Id: <1474432046-325-2-git-send-email-famz@redhat.com>
2016-09-19build-sys: define QEMU_VERSION_{MAJOR, MINOR, MICRO}Marc-André Lureau1-13/+3
There are better chances to find what went wrong at build time than a later assert in qmp_query_version Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20160912091913.15831-2-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-06qmp: add QMP interface "query-cpu-model-baseline"David Hildenbrand1-0/+7
Let's provide a standardized interface to baseline two CPU models, to create a third, compatible one. This is especially helpful when two CPU models are not identical, but a CPU model is required that is guaranteed to run under both configurations, where the original models run. "query-cpu-model-baseline" takes two CPU models and returns a third, compatible model. The result will always be a static CPU model. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <20160905085244.99980-28-dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06qmp: add QMP interface "query-cpu-model-comparison"David Hildenbrand1-0/+7
Let's provide a standardized interface to compare two CPU models. "query-cpu-model-compare" takes two models and returns how they compare in a specific configuration. The result will give guarantees about runnability. E.g. if a CPU model A is a subset of CPU model B, model A is guaranteed to run in configurations where model B runs, but not the other way around (might or might not run). Usually, CPU features or CPU generations are used to calculate the result. If a model is not guaranteed to run in a certain environment (e.g. incompatible), a compatible one can be created by "baselining" both models (follow up patch). Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <20160905085244.99980-27-dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06qmp: add QMP interface "query-cpu-model-expansion"David Hildenbrand1-0/+7
Let's provide a standardized interface to expand CPU models. This interface can be used by tooling to get details about a specific CPU model in a certain configuration, e.g. about the "host" model. To take care of all architectures, two detail levels for an expansion are introduced. Certain architectures might not support all detail levels. While "full" will expand and indicate all relevant properties/features of a CPU model, "static" expands to a static base CPU model, that will never change between QEMU versions and therefore have the same features when used under different compatibility machines. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <20160905085244.99980-26-dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-07-06qmp-input-visitor: Favor new visit_free() functionEric Blake1-5/+4
Now that we have a polymorphic visit_free(), we no longer need qmp_input_visitor_cleanup(); which in turn means we no longer need to return a subtype from qmp_input_visitor_new() nor a public upcast function. Generated code changes to qmp-marshal.c look like: |@@ -52,11 +52,10 @@ void qmp_marshal_add_fd(QDict *args, QOb | { | Error *err = NULL; | AddfdInfo *retval; |- QmpInputVisitor *qiv = qmp_input_visitor_new(QOBJECT(args), true); | Visitor *v; | q_obj_add_fd_arg arg = {0}; | |- v = qmp_input_get_visitor(qiv); |+ v = qmp_input_visitor_new(QOBJECT(args), true); | visit_start_struct(v, NULL, NULL, 0, &err); | if (err) { | goto out; Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-8-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
generated by cgit v1.1 at 2024-11-03 00:21:51 +0000