aboutsummaryrefslogtreecommitdiff
path: root/qemu-options.hx
AgeCommit message (Collapse)AuthorFilesLines
2019-10-18audio: add mixing-engine option (documentation)Kővágó, Zoltán1-0/+15
This will allow us to disable mixeng when we use a decent backend. Disabling mixeng have a few advantages: * we no longer convert the audio output from one format to another, when the underlying audio system would just convert it to a third format. We no longer convert, only the underlying system, when needed. * the underlying system probably has better resampling and sample format converting methods anyway... * we may support formats that the mixeng currently does not support (S24 or float samples, more than two channels) * when using an audio server (like pulseaudio) different sound card outputs will show up as separate streams, even if we use only one backend Disadvantages: * audio capturing no longer works (wavcapture, and vnc audio extension) * some backends only support a single playback stream or very picky about the audio format. In this case we can't disable mixeng. Originally thw two main use cases of the disabled option was: using unsupported audio formats (5.1 and 7.1 audio) and having different pulseaudio streams per audio frontend. Since we can have multiple -audiodevs, the latter is not that important, so currently you only need this option if you want to use 5.1 or 7.1 audio (implemented in a later patch), otherwise it's probably better to stick to the old and tried mixeng, since it's less picky about the backends. The ideal solution would be to port as much as possible to gstreamer, but this is currently out of scope: https://wiki.qemu.org/Internships/ProjectIdeas/AudioGStreamer Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Message-id: 5765186a7aadd51a72bc7d3e804307f0ee8a34ce.1570996490.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-10-109p: Added virtfs option 'multidevs=remap|forbid|warn'Antonios Motakis1-2/+24
'warn' (default): Only log an error message (once) on host if more than one device is shared by same export, except of that just ignore this config error though. This is the default behaviour for not breaking existing installations implying that they really know what they are doing. 'forbid': Like 'warn', but except of just logging an error this also denies access of guest to additional devices. 'remap': Allows to share more than one device per export by remapping inodes from host to guest appropriately. To support multiple devices on the 9p share, and avoid qid path collisions we take the device id as input to generate a unique QID path. The lowest 48 bits of the path will be set equal to the file inode, and the top bits will be uniquely assigned based on the top 16 bits of the inode and the device id. Signed-off-by: Antonios Motakis <antonios.motakis@huawei.com> [CS: - Rebased to https://github.com/gkurz/qemu/commits/9p-next (SHA1 7fc4c49e91). - Added virtfs option 'multidevs', original patch simply did the inode remapping without being asked. - Updated hash calls to new xxhash API. - Updated docs for new option 'multidevs'. - Fixed v9fs_do_readdir() not having remapped inodes. - Log error message when running out of prefixes in qid_path_prefixmap(). - Fixed definition of QPATH_INO_MASK. - Wrapped qpp_table initialization to dedicated qpp_table_init() function. - Dropped unnecessary parantheses in qpp_lookup_func(). - Dropped unnecessary g_malloc0() result checks. ] Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> [groug: - Moved "multidevs" parsing to the local backend. - Added hint to invalid multidevs option error. - Turn "remap" into "x-remap". ] Signed-off-by: Greg Kurz <groug@kaod.org>
2019-09-24Merge remote-tracking branch ↵Peter Maydell1-4/+4
'remotes/kraxel/tags/audio-20190924-pull-request' into staging audio: documentation fixes. audio: new backend api (first part of the surround sound patch series). # gpg: Signature made Tue 24 Sep 2019 07:19:31 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/audio-20190924-pull-request: audio: split ctl_* functions into enable_* and volume_* audio: common rate control code for timer based outputs audio: unify input and output mixeng buffer management audio: remove remains of the old backend api wavaudio: port to the new audio backend api spiceaudio: port to the new audio backend api sdlaudio: port to the new audio backend api paaudio: port to the new audio backend api ossaudio: port to the new audio backend api noaudio: port to the new audio backend api dsoundaudio: port to the new audio backend api coreaudio: port to the new audio backend api alsaaudio: port to the new audio backend api audio: api for mixeng code free backends audio: fix ALSA period-length typo in documentation audio: fix buffer-length typo in documentation Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-23audio: fix ALSA period-length typo in documentationStefan Hajnoczi1-2/+2
Fixes: f0b3d811529 ("audio: -audiodev command line option: documentation") Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190918095335.7646-4-stefanha@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-09-23audio: fix buffer-length typo in documentationStefan Hajnoczi1-2/+2
Fixes: f0b3d811529 ("audio: -audiodev command line option: documentation") Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190918095335.7646-2-stefanha@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-09-23Merge remote-tracking branch ↵Peter Maydell1-3/+7
'remotes/cminyard/tags/ipmi-for-release-2019-09-20' into staging ipmi: Some bug fixes and new interfaces Some bug fixes for the watchdog and hopeful the BT tests. Change the IPMI UUID handling to give the user the ability to set it or not have it. Add a PCI interface. Add an SMBus interfaces. -corey # gpg: Signature made Fri 20 Sep 2019 20:11:21 BST # gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81 # gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown] # gpg: aka "Corey Minyard <minyard@acm.org>" [unknown] # gpg: aka "Corey Minyard <corey@minyard.net>" [unknown] # gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81 * remotes/cminyard/tags/ipmi-for-release-2019-09-20: pc: Add an SMB0 ACPI device to q35 ipmi: Fix SSIF ACPI handling to use the right CRS acpi: Add i2c serial bus CRS handling ipmi: Add an SMBus IPMI interface ipmi: Add PCI IPMI interfaces smbios:ipmi: Ignore IPMI devices with no fwinfo function ipmi: Allow a size value to be passed for I/O space ipmi: Split out BT-specific code from ISA BT code ipmi: Split out KCS-specific code from ISA KCS code ipmi: Add a UUID device property qdev: Add a no default uuid property tests:ipmi: Fix IPMI BT tests ipmi: Generate an interrupt on watchdog pretimeout expiry ipmi: Fix the get watchdog command ipmi: Fix watchdog NMI handling Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-20ipmi: Add a UUID device propertyCorey Minyard1-3/+7
Using the UUID that qemu generates probably isn't the best thing to do, allow it to be passed in via properties, and use QemuUUID for the type. If the UUID is not set, return an unsupported command error. This way we are not providing an all-zero (or randomly generated) GUID to the IPMI user. This lets the host fall back to the other method of using the get device id command to determind the BMC being accessed. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Cédric Le Goater <clg@kaod.org> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com>
2019-09-19Replace '-machine accel=xyz' with '-accel xyz'Thomas Huth1-1/+1
We've got a separate option to configure the accelerator nowadays, which is shorter to type and the preferred way of specifying an accelerator. Use it in the source and examples to show that it is the favored option. (However, do not touch the places yet which also specify other machine options or multiple accelerators - these are currently still better handled with one single "-machine" statement instead) Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20190904052739.22123-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-09-05qemu-doc: Do not hard-code the name of the QEMU binaryThomas Huth1-64/+64
In our documentation, we use a mix of "$QEMU", "qemu-system-i386" and "qemu-system-x86_64" when we give examples to the users how to run QEMU. Some more consistency would be good here. Also some distributions use different names for the QEMU binary (e.g. "qemu-kvm" in RHEL), so providing more flexibility here would also be good. Thus let's define some variables for the names of the QEMU command and use those in the documentation instead: @value{qemu_system} for generic examples, and @value{qemu_system_x86} for examples that only work with the x86 binaries. Message-Id: <20190828093447.12441-1-thuth@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-09-04virtio-rng: change default backend to rng-builtinLaurent Vivier1-1/+1
Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20190820160615.14616-4-lvivier@redhat.com>
2019-09-04rng-builtin: add an RNG backend that uses qemu_guest_getrandom()Laurent Vivier1-0/+7
Add a new RNG backend using QEMU builtin getrandom function. It can be created and used with something like: ... -object rng-builtin,id=rng0 -device virtio-rng,rng=rng0 ... Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20190820160615.14616-2-lvivier@redhat.com>
2019-08-22Merge remote-tracking branch 'remotes/kraxel/tags/usb-20190822-pull-request' ↵Peter Maydell1-2/+5
into staging usb: bugfixes and minor improvements. # gpg: Signature made Thu 22 Aug 2019 07:52:32 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/usb-20190822-pull-request: ehci: fix queue->dev null ptr dereference usb: reword -usb command-line option and mention xHCI xhci: Add No Op Command usb-redir: merge interrupt packets usbredir: fix buffer-overflow on vmload Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-21usb: reword -usb command-line option and mention xHCIStefan Hajnoczi1-2/+5
The -usb section of the man page is not very clear on what exactly -usb does and fails to mention xHCI as a modern alternative (-device nec-usb-xhci). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20190815141428.29080-1-stefanha@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21audio: add audiodev property to vnc and wav_captureKővágó, Zoltán1-0/+6
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Message-id: 8cbc9e865bbf40850c14340fc0549e6ac2d5fe9c.1566168923.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-07-05vl.c: Add -smp, dies=* command line support and update docLike Xu1-8/+9
For PC target, users could configure the number of dies per one package via command line with this patch, such as "-smp dies=2,cores=4". The parsing rules of new cpu-topology model obey the same restrictions/logic as the legacy socket/core/thread model especially on missing values computing. Signed-off-by: Like Xu <like.xu@linux.intel.com> Message-Id: <20190620054525.37188-4-like.xu@linux.intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05Merge remote-tracking branch ↵Peter Maydell1-1/+1
'remotes/vivier2/tags/trivial-branch-pull-request' into staging Fix typo, change virtio-rng default to urandom # gpg: Signature made Wed 03 Jul 2019 16:24:53 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-pull-request: docs/devel/testing: Fix typo in dockerfile path VirtIO-RNG: Update default entropy source to `/dev/urandom` Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-03VirtIO-RNG: Update default entropy source to `/dev/urandom`Kashyap Chamarthy1-1/+1
When QEMU exposes a VirtIO-RNG device to the guest, that device needs a source of entropy, and that source needs to be "non-blocking", like `/dev/urandom`. However, currently QEMU defaults to the problematic `/dev/random`, which on Linux is "blocking" (as in, it waits until sufficient entropy is available). Why prefer `/dev/urandom` over `/dev/random`? --------------------------------------------- The man pages of urandom(4) and random(4) state: "The /dev/random device is a legacy interface which dates back to a time where the cryptographic primitives used in the implementation of /dev/urandom were not widely trusted. It will return random bytes only within the estimated number of bits of fresh noise in the entropy pool, blocking if necessary. /dev/random is suitable for applications that need high quality randomness, and can afford indeterminate delays." Further, the "Usage" section of the said man pages state: "The /dev/random interface is considered a legacy interface, and /dev/urandom is preferred and sufficient in all use cases, with the exception of applications which require randomness during early boot time; for these applications, getrandom(2) must be used instead, because it will block until the entropy pool is initialized. "If a seed file is saved across reboots as recommended below (all major Linux distributions have done this since 2000 at least), the output is cryptographically secure against attackers without local root access as soon as it is reloaded in the boot sequence, and perfectly adequate for network encryption session keys. Since reads from /dev/random may block, users will usually want to open it in nonblocking mode (or perform a read with timeout), and provide some sort of user notification if the desired entropy is not immediately available." And refer to random(7) for a comparison of `/dev/random` and `/dev/urandom`. What about other OSes? ---------------------- `/dev/urandom` exists and works on OS-X, FreeBSD, DragonFlyBSD, NetBSD and OpenBSD, which cover all the non-Linux platforms we explicitly support, aside from Windows. On Windows `/dev/random` doesn't work either so we don't regress. This is actually another argument in favour of using the newly proposed 'rng-builtin' backend by default, as that will work on Windows. - - - Given the above, change the entropy source for VirtIO-RNG device to `/dev/urandom`. Related discussion in these[1][2] past threads. [1] https://lists.nongnu.org/archive/html/qemu-devel/2018-06/msg08335.html -- "RNG: Any reason QEMU doesn't default to `/dev/urandom`?" [2] https://lists.nongnu.org/archive/html/qemu-devel/2018-09/msg02724.html -- "[RFC] Virtio RNG: Consider changing the default entropy source to /dev/urandom" Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20190529143106.11789-2-lvivier@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-07-02COLO-compare: Add new parameter to communicate with remote colo-frameZhang Chen1-1/+32
We add the "notify_dev=chardevID" parameter. After that colo-compare can connect with remote(currently just for Xen, KVM-COLO didn't need it.) colo-frame through chardev socket, it can notify remote(Xen) colo-frame to handle checkpoint event. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-05-29docs: smbios: remove family=x from type2 entry descriptionIgor Mammedov1-1/+1
'family' option is not part of type 2 table and if user tries to use it as such QEMU will error out with an unknow option error. Drop it from docs lest it confuse users. Fixes: b155eb1d04 ("smbios: document cmdline options for smbios type 2-4, 17 structures") Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1558448611-315074-1-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-28semihosting: enable chardev backed output for consoleAlex Bennée1-2/+4
It will be useful for a number of use-cases to be able to re-direct output to a file like we do with serial output. This does the wiring to allow us to treat then semihosting console like just another character output device. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-05-22cpus: Initialize pseudo-random seeds for all guest cpusRichard Henderson1-0/+10
When the -seed option is given, call qemu_guest_random_seed_main, putting the subsystem into deterministic mode. Pass derived seeds to each cpu created; which is a no-op unless the subsystem is in deterministic mode. Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-17virtfs: Fix documentation of -fsdev and -virtfsGreg Kurz1-27/+66
This fixes several things: - add "id" description to -virtfs documentation - split the description into several lines in both usage and documentation for accurateness and clarity - add documentation and usage of the synth fsdriver - add "throttling.*" description to -fsdev local - add some missing periods - add proper reference to the virtfs-proxy-helper(1) manual page - document that the virtio device may be either virtio-9p-pci, virtio-9p-ccw or virtio-9p-device, depending on the machine type Buglink: https://bugs.launchpad.net/qemu/+bug/1581976 Signed-off-by: Greg Kurz <groug@kaod.org> Acked-by: Thomas Huth <thuth@redhat.com>
2019-05-17vl: Deprecate -virtfs_synthGreg Kurz1-1/+2
The synth fsdriver never got used for anything else but the QTest testcase for VirtIO 9P. And even there, QTest uses -fsdev synth and -device virtio-9p-... directly. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2019-05-14qemu-option.hx: Update missed parameter for colo-compareZhang Chen1-3/+6
We missed the iothread related args in this file. This patch is used to fix this issue. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Message-Id: <20190426090730.2691-4-chen.zhang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-04-29Add Nios II semihosting support.Sandra Loosemore1-4/+4
This patch adds support for libgloss semihosting to Nios II bare-metal emulation. The specification for the protocol can be found in the libgloss sources. Signed-off-by: Sandra Loosemore <sandra@codesourcery.com> Signed-off-by: Julian Brown <julian@codesourcery.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1554321185-2825-3-git-send-email-sandra@codesourcery.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-25util/mmap-alloc: support MAP_SYNC in qemu_ram_mmap()Zhang Yi1-0/+5
When a file supporting DAX is used as vNVDIMM backend, mmap it with MAP_SYNC flag in addition which can ensure file system metadata synced in each guest writes to the backend file, without other QEMU actions (e.g., periodic fsync() by QEMU). Current, We have below different possible use cases: 1. pmem=on is set, shared=on is set, MAP_SYNC supported: a: backend is a dax supporting file. - MAP_SYNC will active. b: backend is not a dax supporting file. - mmap will trigger a warning. then MAP_SYNC flag will be ignored 2. The rest of cases: - we will never pass the MAP_SYNC to mmap2 Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Zhang Yi <yi.z.zhang@linux.intel.com> [ehabkost: Rebased patch to latest code on master] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Tested-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20190422004849.26463-2-richardw.yang@linux.intel.com> [ehabkost: squashed documentation patch] Message-Id: <20190422004849.26463-3-richardw.yang@linux.intel.com> [ehabkost: documentation fixup] Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-13Merge remote-tracking branch 'remotes/kraxel/tags/ui-20190313-pull-request' ↵Peter Maydell1-1/+4
into staging ui: better unicode support for curses, v2. # gpg: Signature made Wed 13 Mar 2019 07:29:44 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/ui-20190313-pull-request: curses: add option to specify VGA font encoding iconv: detect and make curses depend on it Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-13curses: add option to specify VGA font encodingSamuel Thibault1-1/+4
This uses iconv to convert glyphs from the specified VGA font encoding to unicode, and makes use of cchar_t instead of chtype when using ncursesw, which allows to store all wide char as well as the WACS values. The default charset is made CP437 since that is the charset of the hardware default VGA font. This also makes the curses backend set the LC_CTYPE locale to "" to allow curses to emit wide characters. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Eddie Kohler <ekohler@gmail.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190311135127.2229-3-samuel.thibault@ens-lyon.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-12Merge remote-tracking branch ↵Peter Maydell1-3/+233
'remotes/kraxel/tags/audio-20190312-pull-request' into staging audio: introduce -audiodev # gpg: Signature made Tue 12 Mar 2019 07:12:19 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/audio-20190312-pull-request: audio: -audiodev command line option: cleanup wavaudio: port to -audiodev config spiceaudio: port to -audiodev config sdlaudio: port to -audiodev config paaudio: port to -audiodev config ossaudio: port to -audiodev config noaudio: port to -audiodev config dsoundaudio: port to -audiodev config coreaudio: port to -audiodev config alsaaudio: port to -audiodev config audio: -audiodev command line option basic implementation audio: -audiodev command line option: documentation audio: use qapi AudioFormat instead of audfmt_e qapi: qapi for audio backends Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # qemu-deprecated.texi
2019-03-11chardev: add support for authorization for TLS clientsDaniel P. Berrange1-2/+8
Currently any client which can complete the TLS handshake is able to use a chardev server. The server admin can turn on the 'verify-peer' option for the x509 creds to require the client to provide a x509 certificate. This means the client will have to acquire a certificate from the CA before they are permitted to use the chardev server. This is still a fairly low bar. This adds a 'tls-authz=OBJECT-ID' option to the socket chardev backend which takes the ID of a previously added 'QAuthZ' object instance. This will be used to validate the client's x509 distinguished name. Clients failing the check will not be permitted to use the chardev server. For example to setup authorization that only allows connection from a client whose x509 certificate distinguished name contains 'CN=fred', you would use: $QEMU -object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\ endpoint=server,verify-peer=yes \ -object authz-simple,id=authz0,identity=CN=laptop.example.com,,\ O=Example Org,,L=London,,ST=London,,C=GB \ -chardev socket,host=127.0.0.1,port=9000,server,\ tls-creds=tls0,tls-authz=authz0 \ ...other qemu args... Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-03-11audio: -audiodev command line option: documentationKővágó, Zoltán1-3/+233
This patch adds documentation of an -audiodev command line option, that deprecates the old QEMU_* environment variables for audio backend configuration. It's syntax is similar to existing options (-netdev, -device, etc): -audiodev driver_name,property=value,... Although now it's possible to specify multiple -audiodev options on command line, multiple audio backends are not supported yet. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Message-id: ca5e761e58dcfaf591cf46080af3548551b42bb2.1552083282.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-11vnc: allow specifying a custom authorization object nameDaniel P. Berrange1-10/+25
The VNC server has historically had support for ACLs to check both the SASL username and the TLS x509 distinguished name. The VNC server was responsible for creating the initial ACL, and the client app was then responsible for populating it with rules using the HMP 'acl_add' command. This is not satisfactory for a variety of reasons. There is no way to populate the ACLs from the command line, users are forced to use the HMP. With multiple network services all supporting TLS and ACLs now, it is desirable to be able to define a single ACL that is referenced by all services. To address these limitations, two new options are added to the VNC server CLI. The 'tls-authz' option takes the ID of a QAuthZ object to use for checking TLS x509 distinguished names, and the 'sasl-authz' option takes the ID of another object to use for checking SASL usernames. In this example, we setup two authorization rules. The first allows any client with a certificate issued by the 'RedHat' organization in the 'London' locality. The second ACL allows clients with either the 'joe@REDHAT.COM' or 'fred@REDHAT.COM' kerberos usernames. Both checks must pass for the user to be allowed. $QEMU -object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\ endpoint=server,verify-peer=yes \ -object authz-simple,id=authz0,policy=deny,\ rules.0.match=O=RedHat,,L=London,rules.0.policy=allow \ -object authz-simple,id=authz1,policy=deny,\ rules.0.match=fred@REDHAT.COM,rules.0.policy=allow \ rules.0.match=joe@REDHAT.COM,rules.0.policy=allow \ -vnc 0.0.0.0:1,tls-creds=tls0,tls-authz=authz0, sasl,sasl-authz=authz1 \ ...other QEMU args... Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20190227145755.26556-2-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-26authz: add QAuthZPAM object type for authorizing using PAMDaniel P. Berrange1-0/+35
Add an authorization backend that talks to PAM to check whether the user identity is allowed. This only uses the PAM account validation facility, which is essentially just a check to see if the provided username is permitted access. It doesn't use the authentication or session parts of PAM, since that's dealt with by the relevant part of QEMU (eg VNC server). Consider starting QEMU with a VNC server and telling it to use TLS with x509 client certificates and configuring it to use an PAM to validate the x509 distinguished name. In this example we're telling it to use PAM for the QAuthZ impl with a service name of "qemu-vnc" $ qemu-system-x86_64 \ -object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\ endpoint=server,verify-peer=yes \ -object authz-pam,id=authz0,service=qemu-vnc \ -vnc :1,tls-creds=tls0,tls-authz=authz0 This requires an /etc/pam/qemu-vnc file to be created with the auth rules. A very simple file based whitelist can be setup using $ cat > /etc/pam/qemu-vnc <<EOF account requisite pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow EOF The /etc/qemu/vnc.allow file simply contains one username per line. Any username not in the file is denied. The usernames in this example are the x509 distinguished name from the client's x509 cert. $ cat > /etc/qemu/vnc.allow <<EOF CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB EOF More interesting would be to configure PAM to use an LDAP backend, so that the QEMU authorization check data can be centralized instead of requiring each compute host to have file maintained. The main limitation with this PAM module is that the rules apply to all QEMU instances on the host. Setting up different rules per VM, would require creating a separate PAM service name & config file for every guest. An alternative approach for the future might be to not pass in the plain username to PAM, but instead combine the VM name or UUID with the username. This requires further consideration though. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2019-02-26authz: add QAuthZListFile object type for a file access control listDaniel P. Berrangé1-0/+46
Add a QAuthZListFile object type that implements the QAuthZ interface. This built-in implementation is a proxy around the QAuthZList object type, initializing it from an external file, and optionally, automatically reloading it whenever it changes. To create an instance of this object via the QMP monitor, the syntax used would be: { "execute": "object-add", "arguments": { "qom-type": "authz-list-file", "id": "authz0", "props": { "filename": "/etc/qemu/vnc.acl", "refresh": true } } } If "refresh" is "yes", inotify is used to monitor the file, automatically reloading changes. If an error occurs during reloading, all authorizations will fail until the file is next successfully loaded. The /etc/qemu/vnc.acl file would contain a JSON representation of a QAuthZList object { "rules": [ { "match": "fred", "policy": "allow", "format": "exact" }, { "match": "bob", "policy": "allow", "format": "exact" }, { "match": "danb", "policy": "deny", "format": "glob" }, { "match": "dan*", "policy": "allow", "format": "exact" }, ], "policy": "deny" } This sets up an authorization rule that allows 'fred', 'bob' and anyone whose name starts with 'dan', except for 'danb'. Everyone unmatched is denied. The object can be loaded on the comand line using -object authz-list-file,id=authz0,filename=/etc/qemu/vnc.acl,refresh=yes Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-02-26authz: add QAuthZSimple object type for easy whitelist auth checksDaniel P. Berrangé1-0/+24
In many cases a single VM will just need to whitelist a single identity as the allowed user of network services. This is especially the case for TLS live migration (optionally with NBD storage) where we just need to whitelist the x509 certificate distinguished name of the source QEMU host. Via QMP this can be configured with: { "execute": "object-add", "arguments": { "qom-type": "authz-simple", "id": "authz0", "props": { "identity": "fred" } } } Or via the command line -object authz-simple,id=authz0,identity=fred Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2019-02-22display: add -display spice-app launching a Spice clientMarc-André Lureau1-0/+5
Add a new display backend that will configure Spice to allow a remote client to control QEMU in a similar fashion as other QEMU display backend/UI like GTK. For this to work, it will set up Spice server with a unix socket, and register a VC chardev that will be exposed as Spice ports. A QMP monitor is also exposed as a Spice port, this allows the remote client fuller qemu control and state handling. - doesn't handle VC set_echo() - this doesn't seem a strong requirement, very few front-end use it - spice options can be tweaked with other -spice arguments - Windows support shouldn't be hard to do, but will probably use a TCP port instead - we may want to watch the child process to quit automatically if it crashed Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Victor Toso <victortoso@redhat.com> Message-id: 20190221110703.5775-12-marcandre.lureau@redhat.com [ kraxel: squash incremental fix ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-14qemu-options: Remove deprecated option -clockThomas Huth1-3/+0
The option is only a dummy since a long time. We've finally deprecated it in QEMU v3.0, so it's time to remove it now. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1549545296-18903-3-git-send-email-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-02-05Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-21/+0
* cpu-exec fixes (Emilio, Laurent) * TCG bugfix in queue.h (Paolo) * high address load for linuxboot (Zhijian) * PVH support (Liam, Stefano) * misc i386 changes (Paolo, Robert, Doug) * configure tweak for openpty (Thomas) * elf2dmp port to Windows (Viktor) * initial improvements to Makefile infrastructure (Yang + GSoC 2013) # gpg: Signature made Tue 05 Feb 2019 17:34:42 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (76 commits) queue: fix QTAILQ_FOREACH_REVERSE_SAFE scsi-generic: Convert from DPRINTF() macro to trace events scsi-disk: Convert from DPRINTF() macro to trace events pc: Use hotplug_handler_(plug|unplug|unplug_request) i386: hvf: Fix smp boot hangs hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller hw/tricore/Makefile.objs: Create CONFIG_* for tricore hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc hw/moxie/Makefile.objs: Conditionally build moxie hw/hppa/Makefile.objs: Create CONFIG_* for hppa hw/cris/Makefile.objs: Create CONFIG_* for cris hw/alpha/Makefile.objs: Create CONFIG_* for alpha hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64 hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards hw/nios2/Makefile.objs: Conditionally build nios2 hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and devices ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # qemu-deprecated.texi
2019-02-05qemu-options: Remove deprecated "-virtioconsole" optionPaolo Bonzini1-10/+0
It's been deprecated since QEMU 3.0, and nobody complained so far, so it is time to remove this option now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1544684731-18828-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05Remove deprecated -enable-hax optionThomas Huth1-11/+0
Our command line interface is really quite overcrowded, we should avoid duplicated options that do the same thing in just a slightly different way. "-accel hax" is shorter and more generic that "-enable-hax", so there is really no real usage for the latter option. "-enable-hax" has been deprecated since two releases, and nobody complained so far, so it's time to remove this now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1544790073-23049-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05Remove deprecated -no-frame optionThomas Huth1-11/+0
The -no-frame option has been deprecated with QEMU v2.12. It was only useful with SDL1.2 - now that we've removed support for SDL1.2, we can certainly remove the -no-frame option, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1549351769-19620-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-14xen: Replace few mentions of xend by libxlAnthony PERARD1-2/+2
xend have been replaced by libxenlight (libxl) for many Xen releases now. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org>
2019-01-14Remove broken Xen PV domain builderAnthony PERARD1-8/+0
It is broken since Xen 4.9 [1] and it will not build in Xen 4.12. Also, it is not built by default since QEMU 2.6. [1] https://lists.xenproject.org/archives/html/xen-devel/2018-09/msg00313.html Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org>
2019-01-08util: Implement debug-threads for macOSRoman Bolshakov1-2/+2
macOS provides pthread_setname_np that doesn't have thread id argument. Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-129p: remove support for the "handle" backendGreg Kurz1-4/+4
The "handle" fsdev backend was deprecated in QEMU 2.12.0 with: commit db3b3c7281ca82e2647e072a1f97db111313dd73 Author: Greg Kurz <groug@kaod.org> Date: Mon Jan 8 11:18:23 2018 +0100 9pfs: deprecate handle backend This backend raise some concerns: - doesn't support symlinks - fails +100 tests in the PJD POSIX file system test suite [1] - requires the QEMU process to run with the CAP_DAC_READ_SEARCH capability, which isn't recommended for security reasons This backend should not be used and wil be removed. The 'local' backend is the recommended alternative. [1] https://www.tuxera.com/community/posix-test-suite/ Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> It has passed the two release cooling period without any complaint. Remove it now. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2018-11-27hostmem-memfd: honour share=on/off propertyMarc-André Lureau1-1/+3
The share=on/off property is used to modified mmap() MAP_SHARED setting. Make it on by default for convenience and compatibility reasons. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-11-16help: Provide help for egl-headlessErik Skultety1-1/+5
EGL headless has been missing from QEMU's help or man page, we should mention that such a thing exists, especially since projects like libvirt might rely on that. This patch also adds the newly introduced option for egl-headless 'rendernode'. Signed-off-by: Erik Skultety <eskultet@redhat.com> Message-id: 87ef678b0934d3abba66c46c9e65b57119d29295.1542362949.git.eskultet@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-12bt: Mark the bluetooth subsystem as deprecatedThomas Huth1-0/+4
It has been unmaintained since years, and there were only trivial or tree-wide changes to the related files since many years, so the code is likely very bitrotten and broken. For example the following segfaults as soon as as you press a key: qemu-system-x86_64 -usb -device usb-bt-dongle -bt hci -bt device:keyboard Since we are not aware of anybody using bluetooth with the current version of QEMU, let's mark the subsystem as deprecated, with a special request for the users to write to the qemu-devel mailing list in case they still use it (so we could revert the deprecation status in that case). Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1542016830-19189-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-01chardev: Add websocket supportJulia Suvorova1-3/+10
New option "websocket" added to allow using WebSocket protocol for chardev socket backend. Example: -chardev socket,websocket,server,id=... Signed-off-by: Julia Suvorova <jusual@mail.ru> Message-Id: <20181018223501.21683-3-jusual@mail.ru> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-10-21slirp: Implement RFC2132 TFTP server nameFam Zheng1-1/+6
This new usernet option can be used to add data for option 66 (tftp server name) in the BOOTP reply, which is useful in PXE based automatic OS install such as OpenBSD. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
generated by cgit v1.1 at 2024-12-28 18:21:00 +0000