aboutsummaryrefslogtreecommitdiff
path: root/qemu-options.hx
AgeCommit message (Collapse)AuthorFilesLines
2020-09-01qemu-options.hx: Fix typo for netdev documentationTianjia Zhang1-1/+1
This patch fixes the netdev document description typo in qemu-option.hx. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20200727045925.29375-1-tianjia.zhang@linux.alibaba.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-27hw/smbios: add options for type 4 max-speed and current-speedYing Fang1-1/+1
Common VM users sometimes care about CPU speed, so we add two new options to allow VM vendors to present CPU speed to their users. Normally these information can be fetched from host smbios. Strictly speaking, the "max speed" and "current speed" in type 4 are not really for the max speed and current speed of processor, for "max speed" identifies a capability of the system, and "current speed" identifies the processor's speed at boot (see smbios spec), but some applications do not tell the differences. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Ying Fang <fangying1@huawei.com> Signed-off-by: Heyi Guo <guoheyi@huawei.com> Message-Id: <20200806035634.376-2-fangying1@huawei.com>
2020-07-17ipmi: Fix a man page entryCorey Minyard1-1/+1
The line was too long, and some of the entries were wrong (fur instead of fru). Just use the prop=val thing tha other entries use. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-07-17ipmi: Add man page pieces for the IPMI PCI devicesCorey Minyard1-0/+9
This was forgotten when the devices were added. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-07-15qemu-options.hx: Clean up and fix typo for colo-compareZhang Chen1-16/+16
Fix some typo and optimized some descriptions. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-07-15net/colo-compare.c: Expose compare "max_queue_size" to usersZhang Chen1-2/+3
This patch allow users to set the "max_queue_size" according to their environment. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-07-10util/qemu-error: prepend guest name to error message to identify affected VM ↵Mario Smarduch1-3/+9
owner This is followup patch to the one submitted back in Oct, 19 https://lists.gnu.org/archive/html/qemu-devel/2019-10/msg02102.html My mistake here, I took my eyes of the mailing list after I got the initial thumbs up. This patch follows up on Markus comments in the above link. Purpose of this patch: We want to print guest name for errors, warnings and info messages. This was the first of two patches the second being MCE errors targeting a VM with guest name prepended. But in a large fleet we see many other errors that disable a VM or crash it. In a large fleet and centralized logging having the guest name enables identify of owner and customer. Signed-off-by: Mario Smarduch <msmarduch@digitalocean.com> Message-Id: <20200626201900.8876-1-msmarduch@digitalocean.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-09Merge remote-tracking branch 'remotes/philmd-gitlab/tags/fw_cfg-20200704' ↵Peter Maydell1-0/+37
into staging firmware (and crypto) patches - add the tls-cipher-suites object, - add the ability to QOM objects to produce data consumable by the fw_cfg device, - let the tls-cipher-suites object implement the FW_CFG_DATA_GENERATOR interface. This is required by EDK2 'HTTPS Boot' feature of OVMF to tell the guest which TLS ciphers it can use. CI jobs results: https://travis-ci.org/github/philmd/qemu/builds/704724619 https://gitlab.com/philmd/qemu/-/pipelines/162938106 https://cirrus-ci.com/build/4682977303068672 # gpg: Signature made Sat 04 Jul 2020 17:37:08 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/fw_cfg-20200704: crypto/tls-cipher-suites: Produce fw_cfg consumable blob softmmu/vl: Allow -fw_cfg 'gen_id' option to use the 'etc/' namespace softmmu/vl: Let -fw_cfg option take a 'gen_id' argument hw/nvram/fw_cfg: Add the FW_CFG_DATA_GENERATOR interface crypto: Add tls-cipher-suites object Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-07vhost-vdpa: introduce vhost-vdpa backendCindy Lu1-0/+12
Currently we have 2 types of vhost backends in QEMU: vhost kernel and vhost-user. The above patch provides a generic device for vDPA purpose, this vDPA device exposes to user space a non-vendor-specific configuration interface for setting up a vhost HW accelerator, this patch set introduces a third vhost backend called vhost-vdpa based on the vDPA interface. Vhost-vdpa usage: qemu-system-x86_64 -cpu host -enable-kvm \ ...... -netdev type=vhost-vdpa,vhostdev=/dev/vhost-vdpa-id,id=vhost-vdpa0 \ -device virtio-net-pci,netdev=vhost-vdpa0,page-per-vq=on \ Signed-off-by: Lingshan zhu <lingshan.zhu@intel.com> Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Cindy Lu <lulu@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20200701145538.22333-14-lulu@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-07-03crypto/tls-cipher-suites: Produce fw_cfg consumable blobPhilippe Mathieu-Daudé1-0/+18
Since our format is consumable by the fw_cfg device, we can implement the FW_CFG_DATA_GENERATOR interface. Example of use to dump the cipher suites (if tracing enabled): $ qemu-system-x86_64 -S \ -object tls-cipher-suites,id=mysuite1,priority=@SYSTEM \ -fw_cfg name=etc/path/to/ciphers,gen_id=mysuite1 \ -trace qcrypto\* 1590664444.197123:qcrypto_tls_cipher_suite_priority priority: @SYSTEM 1590664444.197219:qcrypto_tls_cipher_suite_info data=[0x13,0x02] version=TLS1.3 name=TLS_AES_256_GCM_SHA384 1590664444.197228:qcrypto_tls_cipher_suite_info data=[0x13,0x03] version=TLS1.3 name=TLS_CHACHA20_POLY1305_SHA256 1590664444.197233:qcrypto_tls_cipher_suite_info data=[0x13,0x01] version=TLS1.3 name=TLS_AES_128_GCM_SHA256 1590664444.197236:qcrypto_tls_cipher_suite_info data=[0x13,0x04] version=TLS1.3 name=TLS_AES_128_CCM_SHA256 1590664444.197240:qcrypto_tls_cipher_suite_info data=[0xc0,0x30] version=TLS1.2 name=TLS_ECDHE_RSA_AES_256_GCM_SHA384 1590664444.197245:qcrypto_tls_cipher_suite_info data=[0xcc,0xa8] version=TLS1.2 name=TLS_ECDHE_RSA_CHACHA20_POLY1305 1590664444.197250:qcrypto_tls_cipher_suite_info data=[0xc0,0x14] version=TLS1.0 name=TLS_ECDHE_RSA_AES_256_CBC_SHA1 1590664444.197254:qcrypto_tls_cipher_suite_info data=[0xc0,0x2f] version=TLS1.2 name=TLS_ECDHE_RSA_AES_128_GCM_SHA256 1590664444.197258:qcrypto_tls_cipher_suite_info data=[0xc0,0x13] version=TLS1.0 name=TLS_ECDHE_RSA_AES_128_CBC_SHA1 1590664444.197261:qcrypto_tls_cipher_suite_info data=[0xc0,0x2c] version=TLS1.2 name=TLS_ECDHE_ECDSA_AES_256_GCM_SHA384 1590664444.197266:qcrypto_tls_cipher_suite_info data=[0xcc,0xa9] version=TLS1.2 name=TLS_ECDHE_ECDSA_CHACHA20_POLY1305 1590664444.197270:qcrypto_tls_cipher_suite_info data=[0xc0,0xad] version=TLS1.2 name=TLS_ECDHE_ECDSA_AES_256_CCM 1590664444.197274:qcrypto_tls_cipher_suite_info data=[0xc0,0x0a] version=TLS1.0 name=TLS_ECDHE_ECDSA_AES_256_CBC_SHA1 1590664444.197278:qcrypto_tls_cipher_suite_info data=[0xc0,0x2b] version=TLS1.2 name=TLS_ECDHE_ECDSA_AES_128_GCM_SHA256 1590664444.197283:qcrypto_tls_cipher_suite_info data=[0xc0,0xac] version=TLS1.2 name=TLS_ECDHE_ECDSA_AES_128_CCM 1590664444.197287:qcrypto_tls_cipher_suite_info data=[0xc0,0x09] version=TLS1.0 name=TLS_ECDHE_ECDSA_AES_128_CBC_SHA1 1590664444.197291:qcrypto_tls_cipher_suite_info data=[0x00,0x9d] version=TLS1.2 name=TLS_RSA_AES_256_GCM_SHA384 1590664444.197296:qcrypto_tls_cipher_suite_info data=[0xc0,0x9d] version=TLS1.2 name=TLS_RSA_AES_256_CCM 1590664444.197300:qcrypto_tls_cipher_suite_info data=[0x00,0x35] version=TLS1.0 name=TLS_RSA_AES_256_CBC_SHA1 1590664444.197304:qcrypto_tls_cipher_suite_info data=[0x00,0x9c] version=TLS1.2 name=TLS_RSA_AES_128_GCM_SHA256 1590664444.197308:qcrypto_tls_cipher_suite_info data=[0xc0,0x9c] version=TLS1.2 name=TLS_RSA_AES_128_CCM 1590664444.197312:qcrypto_tls_cipher_suite_info data=[0x00,0x2f] version=TLS1.0 name=TLS_RSA_AES_128_CBC_SHA1 1590664444.197316:qcrypto_tls_cipher_suite_info data=[0x00,0x9f] version=TLS1.2 name=TLS_DHE_RSA_AES_256_GCM_SHA384 1590664444.197320:qcrypto_tls_cipher_suite_info data=[0xcc,0xaa] version=TLS1.2 name=TLS_DHE_RSA_CHACHA20_POLY1305 1590664444.197325:qcrypto_tls_cipher_suite_info data=[0xc0,0x9f] version=TLS1.2 name=TLS_DHE_RSA_AES_256_CCM 1590664444.197329:qcrypto_tls_cipher_suite_info data=[0x00,0x39] version=TLS1.0 name=TLS_DHE_RSA_AES_256_CBC_SHA1 1590664444.197333:qcrypto_tls_cipher_suite_info data=[0x00,0x9e] version=TLS1.2 name=TLS_DHE_RSA_AES_128_GCM_SHA256 1590664444.197337:qcrypto_tls_cipher_suite_info data=[0xc0,0x9e] version=TLS1.2 name=TLS_DHE_RSA_AES_128_CCM 1590664444.197341:qcrypto_tls_cipher_suite_info data=[0x00,0x33] version=TLS1.0 name=TLS_DHE_RSA_AES_128_CBC_SHA1 1590664444.197345:qcrypto_tls_cipher_suite_count count: 29 Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200623172726.21040-6-philmd@redhat.com>
2020-07-03crypto: Add tls-cipher-suites objectPhilippe Mathieu-Daudé1-0/+19
On the host OS, various aspects of TLS operation are configurable. In particular it is possible for the sysadmin to control the TLS cipher/protocol algorithms that applications are permitted to use. * Any given crypto library has a built-in default priority list defined by the distro maintainer of the library package (or by upstream). * The "crypto-policies" RPM (or equivalent host OS package) provides a config file such as "/etc/crypto-policies/config", where the sysadmin can set a high level (library-independent) policy. The "update-crypto-policies --set" command (or equivalent) is used to translate the global policy to individual library representations, producing files such as "/etc/crypto-policies/back-ends/*.config". The generated files, if present, are loaded by the various crypto libraries to override their own built-in defaults. For example, the GNUTLS library may read "/etc/crypto-policies/back-ends/gnutls.config". * A management application (or the QEMU user) may overide the system-wide crypto-policies config via their own config, if they need to diverge from the former. Thus the priority order is "QEMU user config" > "crypto-policies system config" > "library built-in config". Introduce the "tls-cipher-suites" object for exposing the ordered list of permitted TLS cipher suites from the host side to the guest firmware, via fw_cfg. The list is represented as an array of bytes. The priority at which the host-side policy is retrieved is given by the "priority" property of the new object type. For example, "priority=@SYSTEM" may be used to refer to "/etc/crypto-policies/back-ends/gnutls.config" (given that QEMU uses GNUTLS). The firmware uses the IANA_TLS_CIPHER array for configuring guest-side TLS, for example in UEFI HTTPS Boot. [Description from Daniel P. Berrangé, edited by Laszlo Ersek.] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200623172726.21040-2-philmd@redhat.com>
2020-06-26numa: forbid '-numa node, mem' for 5.1 and newer machine typesIgor Mammedov1-4/+5
Deprecation period is run out and it's a time to flip the switch introduced by cd5ff8333a. Disable legacy option for new machine types (since 5.1) and amend documentation. '-numa node,memdev' shall be used instead of disabled option with new machine types. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200609135635.761587-1-imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-20qemu-options: updates for abstract unix socketsxiaoqiang zhao1-2/+6
add options documents changes for -chardev Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-05-14qemu-options.hx: 9p: clarify -virtfs vs. -fsdevChristian Schoenebeck1-3/+11
The docs are ambiguous about the difference (or actually their equality) between options '-virtfs' vs. '-fsdev'. So clarify that '-virtfs' is actually just a convenience shortcut for its generalized form '-fsdev' in conjunction with '-device virtio-9p-pci'. And as we're at it, also be a bit more descriptive what 9pfs is actually used for. Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <208f1fceffce2feaf7c900b29e326b967dce7762.1585661532.git.qemu_oss@crudebyte.com> Signed-off-by: Greg Kurz <groug@kaod.org>
2020-04-14docs: Improve our gdbstub documentationPeter Maydell1-6/+18
The documentation of our -s and -gdb options is quite old; in particular it still claims that it will cause QEMU to stop and wait for the gdb connection, when this has not been true for some time: you also need to pass -S if you want to make QEMU not launch the guest on startup. Improve the documentation to mention this requirement in the executable's --help output, the documentation of the -gdb option in the manual, and in the "GDB usage" chapter. Includes some minor tweaks to these paragraphs of documentation since I was editing them anyway (such as dropping the description of our gdb support as "primitive"). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200403094014.9589-1-peter.maydell@linaro.org
2020-03-31net/colo-compare.c: Expose "expired_scan_cycle" to usersZhang Chen1-1/+3
The "expired_scan_cycle" determines period of scanning expired primary node net packets. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-31net/colo-compare.c: Expose "compare_timeout" to usersZhang Chen1-3/+5
The "compare_timeout" determines the maximum time to hold the primary net packet. This patch expose the "compare_timeout", make user have ability to adjest the value according to application scenarios. QMP command demo: { "execute": "qom-get", "arguments": { "path": "/objects/comp0", "property": "compare_timeout" } } { "execute": "qom-set", "arguments": { "path": "/objects/comp0", "property": "compare_timeout", "value": 5000} } Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-16audio: add audiodev format=f32 option documentationVolker Rümelin1-2/+2
The documentaion for -audiodev format=f32 option was missing. Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-id: 20200308193321.20668-6-vr_qemu@t-online.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-03-12Update comments in .hx files that mention TexinfoPeter Maydell1-4/+4
Update the header comments in .hx files that mention STEXI/ETEXI markup; this is now SRST/ERST as all these files have been converted to rST. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200306171749.10756-3-peter.maydell@linaro.org
2020-03-06*.hx: Remove all the STEXI/ETEXI blocksPeter Maydell1-4075/+0
We no longer generate texinfo from the hxtool input files, so delete all the STEXI/ETEXI blocks. This commit was created using the following Perl one-liner: perl -i -n -e '$suppress = 1,next if /^STEXI/;$suppress=0,next if /^ETEXI/; print if !$suppress;' *.hx Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-06qemu-options.hx: Fix up the autogenerated rSTPeter Maydell1-62/+81
This commit contains hand-written fixes for some issues with the autogenerated rST fragments in qemu-options.hx: * Sphinx complains about the UTF-8 art table in the documentation of the -drive option. Replace it with a proper rST format table. * rST does not like definition list entries with no actual definition, but it is possible to work around this by putting a single escaped literal space as the definition line. * The "-g widthxheight" option documentation suffers particularly badly from losing the distinction between italics and fixed-width as a result of the auto conversion, so put it back in again. * The script missed some places that use the |qemu_system| etc macros and need to be marked up as parsed-literal blocks. * The script autogenerated an expanded out version of the contents of qemu-option-trace.texi; replace it with an qemu-option-trace.rst.inc include. This is sufficient that we can enable inclusion of the option documentation from invocation.rst. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200228153619.9906-28-peter.maydell@linaro.org
2020-03-06qemu-options.hx: Add rST documentation fragmentsPeter Maydell1-0/+4020
Add the rST versions of the documentation fragments to qemu-options.hx. This is entirely autogenerated using scripts/hxtool-conv.pl. The result is not quite valid rST in all places; the following commit will have the manual adjustments needed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-06docs: Roll -prom-env and -g target-specific info into qemu-options.hxPeter Maydell1-0/+19
The SPARC and PPC targets currently have a fragment of target-specific information about the -g and -prom options which would be better placed as part of the general documentation of those options in qemu-options.hx. Move the relevant information to those locations. SPARC also has a bit of text about the -M option which is out of date and provides no useful information over the generic documentation of that option, so just delete it. The motivation here is again to avoid having to awkwardly include this text into the rST version of the qemu.1 manpage. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200228153619.9906-25-peter.maydell@linaro.org
2020-03-06docs: Roll semihosting option information into qemu-options.hxPeter Maydell1-0/+18
Currently the per-target documentation for those targets that implement semihosting includes a bit of text that goes into both the manual and the manpage about options specific to the target. This text is redundant with the earlier generic option description of the semihosting option produced from qemu-options.hx. To avoid having to create a lot of stub include files to include into the rST generated qemu.1 manpage, roll target-specific bits of information into the qemu-options.hx text, so the user doesn't have to look in two places for this information. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200228153619.9906-24-peter.maydell@linaro.org
2020-03-06qemu-doc: move included files to docs/systemPaolo Bonzini1-1/+1
Since qemu-doc.texi is mostly including files from docs/system, move the existing include files there for consistency. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200228153619.9906-12-peter.maydell@linaro.org Message-id: 20200226113034.6741-12-pbonzini@redhat.com [PMM: update MAINTAINERS line for qemu-option-trace.texi] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-03l2tpv3: fix RFC number typo in qemu-options.hxStefan Hajnoczi1-2/+2
The L2TPv3 RFC number is 3931: https://tools.ietf.org/html/rfc3931 Reported-by: Henrik Johansson <henrikjohansson@rocketmail.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03net/filter.c: Add Options to insert filters anywhere in the filter listLukas Straub1-5/+26
To switch the Secondary to Primary, we need to insert new filters before the filter-rewriter. Add the options insert= and position= to be able to insert filters anywhere in the filter list. position should be "head" or "tail" to insert at the head or tail of the filter list or it should be "id=<id>" to specify the id of another filter. insert should be either "before" or "behind" to specify where to insert the new filter relative to the one specified with position. Signed-off-by: Lukas Straub <lukasstraub2@web.de> Reviewed-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-02-07docs: stop documenting the e1000 NIC model as the defaultDaniel P. Berrangé1-5/+7
The default NIC model for QEMU varies per machine type, and is liable to change across machine type versions. Documenting e1000 NIC as the default for PC/i386 is thus misleading to users at best. In particular the PC q35 machine type switched to use e1000e, but only in machine type versions after 2.11. Rather than try to explain which NIC model is used for each machine type version, remove mention of e1000 as the default, and steer users towards always specifying their desired model. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-02-06qemu-options: replace constant 1 with HAS_ARGJohn Snow1-1/+1
This is the only instance of a non-zero constant not using a symbolic constant. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-Id: <20200204165638.25051-1-jsnow@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-01-23qemu-block-drivers: Convert to rSTPeter Maydell1-1/+1
The qemu-block-drivers documentation is currently in docs/qemu-block-drivers.texi in Texinfo format, which we present to the user as: * a qemu-block-drivers manpage * a section of the main qemu-doc HTML documentation Convert the documentation to rST format, and present it to the user as: * a qemu-block-drivers manpage * part of the system/ Sphinx manual This follows the same pattern we've done for qemu-ga and qemu-nbd. We have to drop a cross-reference from the documentation of the -cdrom option back to the qemu-block-drivers documentation, since they're no longer within the same texinfo document. As noted in a comment, the manpage output is slightly compromised due to limitations in Sphinx. In an ideal world, the HTML output would have the various headings like 'Disk image file formats' as top-level section headings (which then appear in the overall system manual's table-of-contents), and it would not have the section headings which make sense only for the manpage like 'synopsis', 'description', and 'see also'. Unfortunately, the mechanism Sphinx provides for restricting pieces of documentation is limited to the point of being flawed: the 'only::' directive is implemented as a filter that is applied at a very late stage in the document processing pipeline, rather than as an early equivalent of an #ifdef. This means that Sphinx's process of identifying which section heading markup styles are which levels of heading gets confused if the 'only::' directive contains section headings which would affect the heading-level of a later heading. I have opted to prioritise making the HTML format look better, with the compromise being that in the manpage the 'Disk image file formats' &c headings are top-level headings rather than being sub-headings under the traditional 'Description' top-level section title. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20200116141511.16849-4-peter.maydell@linaro.org
2020-01-14ui: Print available display backends with '-display help'Thomas Huth1-1/+2
We already print availabled devices with "-device help", or available backends with "-netdev help" or "-chardev help". Let's provide a way for the users to query the available display backends, too. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 20200108144702.29969-1-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-01-05numa: Extend CLI to provide memory side cache informationLiu Jingqi1-2/+15
Add -numa hmat-cache option to provide Memory Side Cache Information. These memory attributes help to build Memory Side Cache Information Structure(s) in ACPI Heterogeneous Memory Attribute Table (HMAT). Before using hmat-cache option, enable HMAT with -machine hmat=on. Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-4-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2020-01-05numa: Extend CLI to provide memory latency and bandwidth informationLiu Jingqi1-1/+46
Add -numa hmat-lb option to provide System Locality Latency and Bandwidth Information. These memory attributes help to build System Locality Latency and Bandwidth Information Structure(s) in ACPI Heterogeneous Memory Attribute Table (HMAT). Before using hmat-lb option, enable HMAT with -machine hmat=on. Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-3-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2020-01-05numa: Extend CLI to provide initiator information for numa nodesTao Xu1-5/+30
In ACPI 6.3 chapter 5.2.27 Heterogeneous Memory Attribute Table (HMAT), The initiator represents processor which access to memory. And in 5.2.27.3 Memory Proximity Domain Attributes Structure, the attached initiator is defined as where the memory controller responsible for a memory proximity domain. With attached initiator information, the topology of heterogeneous memory can be described. Add new machine property 'hmat' to enable all HMAT specific options. Extend CLI of "-numa node" option to indicate the initiator numa node-id. In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report the platform's HMAT tables. Before using initiator option, enable HMAT with -machine hmat=on. Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jingqi Liu <jingqi.liu@intel.com> Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-2-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-12-20Merge remote-tracking branch ↵Peter Maydell1-2/+2
'remotes/vivier2/tags/trivial-branch-pull-request' into staging Trivial fixes (20191218) # gpg: Signature made Wed 18 Dec 2019 13:00:34 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-pull-request: qemu-doc: Remove the unused "Guest Agent" node Revert "qemu-options.hx: Update for reboot-timeout parameter" target/sparc: Remove old TODO file test-keyval: Tighten test of trailing crap after size util/cutils: Turn FIXME comment into QEMU_BUILD_BUG_ON() monitor: Remove unused define MAINTAINERS: Add hw/sd/ssi-sd.c in the SD section Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-11/+19
* More uses of RCU_READ_LOCK_GUARD (Dave, myself) * QOM doc improvments (Greg) * Cleanups from the Meson conversion (Marc-André) * Support for multiple -accel options (myself) * Many x86 machine cleanup (Philippe, myself) * tests/migration-test cleanup (Juan) * PC machine removal and next round of deprecation (Thomas) * kernel-doc integration (Peter, myself) # gpg: Signature made Wed 18 Dec 2019 01:35:02 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (87 commits) vga: cleanup mapping of VRAM for non-PCI VGA hw/display: Remove "rombar" hack from vga-pci and vmware_vga hw/pci: Remove the "command_serr_enable" property hw/audio: Remove the "use_broken_id" hack from the AC97 device hw/i386: Remove the deprecated machines 0.12 up to 0.15 hw/pci-host: Add Kconfig entry to select the IGD Passthrough Host Bridge hw/pci-host/i440fx: Extract the IGD passthrough host bridge device hw/pci-host/i440fx: Use definitions instead of magic values hw/pci-host/i440fx: Use size_t to iterate over ARRAY_SIZE() hw/pci-host/i440fx: Extract PCII440FXState to "hw/pci-host/i440fx.h" hw/pci-host/i440fx: Correct the header description Fix some comment spelling errors. target/i386: remove unused pci-assign codes WHPX: refactor load library migration: check length directly to make sure the range is aligned memory: include MemoryListener documentation and some missing function parameters docs: add memory API reference memory.h: Silence kernel-doc complaints docs: Create bitops.rst as example of kernel-docs bitops.h: Silence kernel-doc complaints ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-18Revert "qemu-options.hx: Update for reboot-timeout parameter"Han Han1-2/+2
This reverts commit bbd9e6985ff342cbe15b9cb7eb30e842796fbbe8. In 20a1922032 we allowed reboot-timeout=-1 again, so update the doc accordingly. Signed-off-by: Han Han <hhan@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20191205024821.245435-1-hhan@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-12-18error: Fix -msg timestamp defaultMarkus Armbruster1-3/+7
-msg parameter "timestamp" defaults to "off" if you don't specify msg, and to "on" if you do. Messed up right in commit 5e2ac51917 "add timestamp to error_report()". Mostly harmless, because "timestamp" is the only parameter, so "if you do" is "-msg ''", which nobody does. Change the default to "off" no matter what. While there, rename enable_timestamp_msg to error_with_timestamp, and polish documentation. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20191010081508.8978-1-armbru@redhat.com>
2019-12-17kvm: convert "-machine kernel_irqchip" to an accelerator propertyPaolo Bonzini1-3/+6
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17kvm: convert "-machine kvm_shadow_mem" to an accelerator propertyPaolo Bonzini1-3/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17xen: convert "-machine igd-passthru" to an accelerator propertyPaolo Bonzini1-3/+4
The first machine property to fall is Xen's Intel integrated graphics passthrough. The "-machine igd-passthru" option does not set anymore a property on the machine object, but desugars to a GlobalProperty on accelerator objects. The setter is very simple, since the value ends up in a global variable, so this patch also provides an example before the more complicated cases that follow it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17tcg: add "-accel tcg,tb-size" and deprecate "-tb-size"Paolo Bonzini1-2/+6
-tb-size fits nicely in the new framework for accelerator-specific options. It is a very niche option, so insta-deprecate it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17Remove the core bluetooth codeThomas Huth1-79/+0
It's been deprecated since QEMU v3.1. We've explicitly asked in the deprecation message that people should speak up on qemu-devel in case they are still actively using the bluetooth part of QEMU, but nobody ever replied that they are really still using it. I've tried it on my own to use this bluetooth subsystem for one of my guests, but I was also not able to get it running anymore: When I was trying to pass-through a real bluetooth device, either the guest did not see the device at all, or the guest crashed. Even worse for the emulated device: When running qemu-system-x86_64 -bt device:keyboard QEMU crashes once you hit a key. So it seems like the bluetooth stack is not only neglected, it is completely bitrotten, as far as I can tell. The only attention that this code got during the past years were some CVEs that have been spotted there. So this code is a burden for the developers, without any real benefit anymore. Time to remove it. Note: hw/bt/Kconfig only gets cleared but not removed here yet. Otherwise there is a problem with the *-softmmu/config-devices.mak.d dependency files - they still contain a reference to this file which gets evaluated first on some build hosts, before the file gets properly recreated. To avoid breaking these builders, we still need the file around for some time. It will get removed in a couple of weeks instead. Message-Id: <20191120091014.16883-4-thuth@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-12-13Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell1-0/+38
staging Pull request # gpg: Signature made Fri 13 Dec 2019 14:32:11 GMT # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: iothread: document -object iothread on man page virtio-blk: advertise F_WCE (F_FLUSH) if F_CONFIG_WCE is advertised Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-13iothread: document -object iothread on man pageStefan Hajnoczi1-0/+38
Add -object iothread documentation to the man page, including references to the query-iothread QMP command and qom-set syntax for adjusting adaptive polling parameters at run-time. Reported-by: Zhenyu Ye <yezhenyu2@huawei.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20191025122236.29815-1-stefanha@redhat.com Message-Id: <20191025122236.29815-1-stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-12-09virtfs: Remove the deprecated "-virtfs_synth" optionThomas Huth1-10/+0
It's been marked as deprecated since QEMU v4.1, time to remove it now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Greg Kurz <groug@kaod.org>
2019-11-07Merge remote-tracking branch ↵Peter Maydell1-0/+5
'remotes/kraxel/tags/audio-20191106-pull-request' into staging audio: documentation update # gpg: Signature made Wed 06 Nov 2019 08:24:44 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/audio-20191106-pull-request: audio: add -audiodev pa,in|out.latency= to documentation Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-06audio: add -audiodev pa,in|out.latency= to documentationStefan Hajnoczi1-0/+5
The "latency" parameter wasn't covered by the documentation. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20191004125641.24383-1-stefanha@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-11-05qemu-options: Rework the help text of the '-display' optionThomas Huth1-9/+21
Improve the help text of the "-display" option: - Only print the options that we have enabled in the binary (similar to what we do for other options like -netdev already) - The "frame=on|off" from "-display sdl" has been removed in commit 09bd7ba9f5f7 ("Remove deprecated -no-frame option"), so we should not show this in the help text anymore - The "-display egl-headless" line was missing a "\n" at the end - Indent the default display text in a nicer way Signed-off-by: Thomas Huth <huth@tuxfamily.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191023120129.13721-1-huth@tuxfamily.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-10-30Merge remote-tracking branch ↵Peter Maydell1-0/+17
'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging TCG Plugins initial implementation - use --enable-plugins @ configure - low impact introspection (-plugin empty.so to measure overhead) - plugins cannot alter guest state - example plugins included in source tree (tests/plugins) - -d plugin to enable plugin output in logs - check-tcg runs extra tests when plugins enabled - documentation in docs/devel/plugins.rst # gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits) travis.yml: enable linux-gcc-debug-tcg cache MAINTAINERS: add me for the TCG plugins code scripts/checkpatch.pl: don't complain about (foo, /* empty */) .travis.yml: add --enable-plugins tests include/exec: wrap cpu_ldst.h in CONFIG_TCG accel/stubs: reduce headers from tcg-stub tests/plugin: add hotpages to analyse memory access patterns tests/plugin: add instruction execution breakdown tests/plugin: add a hotblocks plugin tests/tcg: enable plugin testing tests/tcg: drop test-i386-fprem from TESTS when not SLOW tests/tcg: move "virtual" tests to EXTRA_TESTS tests/tcg: set QEMU_OPTS for all cris runs tests/tcg/Makefile.target: fix path to config-host.mak tests/plugin: add sample plugins linux-user: support -plugin option vl: support -plugin option plugin: add qemu_plugin_outs helper plugin: add qemu_plugin_insn_disas helper plugin: expand the plugin_init function to include an info block ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2024-12-25 03:26:13 +0000