aboutsummaryrefslogtreecommitdiff
path: root/qemu-options.hx
AgeCommit message (Collapse)AuthorFilesLines
2014-01-01doc: Mention chardev:id in available devices for -serialIngo van Lil1-0/+2
It is possible to pre-define a character device with the -chardev option and reference its id as serial device. The man page does not mention this feature. Use case: Use stdio as serial, but do not terminate VM on Ctrl-C -chardev stdio,id=mystdio,signal=off -serial chardev:mystdio Signed-off-by: Ingo van Lil <inguin@gmx.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-13Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori1-1/+1
# By Paolo Bonzini (4) and Peter Lieven (1) # Via Paolo Bonzini * bonzini/scsi-next: help: add id suboption to -iscsi scsi-disk: fix WRITE SAME with large non-zero payload block/iscsi: introduce bdrv_co_{readv, writev, flush_to_disk} scsi-disk: fix VERIFY emulation scsi-bus: fix transfer length and direction for VERIFY command Message-id: 1386594157-17535-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-09help: add id suboption to -iscsiPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-12-09net: Adding netmap network backendVincenzo Maffione1-0/+9
This patch adds support for a network backend based on netmap. netmap is a framework for high speed packet I/O. You can use it to build extremely fast traffic generators, monitors, software switches or network middleboxes. Its companion software switch VALE lets you interconnect virtual machines. netmap and VALE are implemented as a non-intrusive kernel module, support NICs from multiple vendors, are part of standard FreeBSD distributions and available in source format for Linux too. To compile QEMU with netmap support, use the following configure options: ./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys where "/path/to/netmap" contains the netmap source code, available at http://info.iet.unipi.it/~luigi/netmap/ The same webpage contains more information about the netmap project (together with papers and presentations). Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-25qemu: mempath: prefault pages manually (v4)Marcelo Tosatti1-2/+0
v4: s/fail/failed/ (Peter Maydell) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-11-18doc: fix hardcoded helper pathAmos Kong1-3/+3
The install directory of qemu-bridge-helper is configurable, but we use a fixed path in the documentation. DEFAULT_BRIDGE_HELPER macro isn't available in texi mode, we should always use "/path/to/" prefix for dynamic paths (e.g.: /path/to/image, /path/to/linux, etc). Signed-off-by: Amos Kong <akong@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-06block: Add iops_size to do the iops accounting for a given io size.Benoît Canet1-0/+1
This feature can be used in case where users are avoiding the iops limit by doing jumbo I/Os hammering the storage backend. Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06block: Add support for throttling burst max in QMP and the command line.Benoît Canet1-1/+4
The max parameter of the leaky bucket throttling algorithm can be used to allow the guest to do bursts. The max value is a pool of I/O that the guest can use without being throttled at all. Throttling is triggered once this pool is empty. Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-29Revert "chardev: Make the name of memory device consistent"Markus Armbruster1-3/+3
This reverts commit 6a85e60cb994bd95d1537aafbff65816f3de4637. Commit 51767e7 "qemu-char: Add new char backend CirMemCharDriver" introduced a memory ring buffer character device driver named "memory". Commit 3949e59 "qemu-char: Saner naming of memchar stuff & doc fixes" changed the driver name to "ringbuf", along with a whole bunch of other names, with the following rationale: Naming is a mess. The code calls the device driver CirMemCharDriver, the public API calls it "memory", "memchardev", or "memchar", and the special commands are named like "memchar-FOO". "memory" is a particularly unfortunate choice, because there's another character device driver called MemoryDriver. Moreover, the device's distinctive property is that it's a ring buffer, not that's in memory. This is what we released in 1.4.0. Unfortunately, the rename missed a critical instance of "memory": the actual driver name. Thus, the new device could be used only by an entirely undocumented name. The documented name did not work. Bummer. Commit 6a85e60 fixes this by changing the documentation to match the code. It also changes some, but not all related occurences of "ringbuf" to "memory". Left alone are identifiers in C code, HMP and QMP commands. The latter are external interface, so they can't be changed. The result is an inconsistent mess. Moreover, "memory" is a rotten name. The device's distinctive property is that it's a ring buffer, not that's in memory. User's don't care whether it's in RAM, flash, or carved into chocolate tablets by Oompa Loompas. Revert the commit. Next commit will fix just the bug. Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1374849874-25531-2-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-27qemu-options: mention C-a h in the -nographic docRamkumar Ramachandra1-1/+2
Otherwise, a new user will be wondering how to switch between the console and monitor. Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-19doc: monitor multiplexing rewordingMichael Tokarev1-2/+2
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-10add timestamp to error_report()Seiji Aguchi1-0/+11
[Issue] When we offer a customer support service and a problem happens in a customer's system, we try to understand the problem by comparing what the customer reports with message logs of the customer's system. In this case, we often need to know when the problem happens. But, currently, there is no timestamp in qemu's error messages. Therefore, we may not be able to understand the problem based on error messages. [Solution] Add a timestamp to qemu's error message logged by error_report() with g_time_val_to_iso8601(). Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-07-09trap signals for "-serial mon:stdio"Paolo Bonzini1-3/+5
With mon:stdio you can exit the VM by switching to the monitor and sending the "quit" command. It is then useful to pass Ctrl-C to the VM instead of exiting. This in turn lets us stop tying the default signal handling behavior to -nographic, removing gratuitous differences between "-display none" and "-nographic". This patch changes behavior for "-display none -serial mon:stdio", as expected, but not for "-display none -serial stdio". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1372868986-25988-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-28vl: convert -smp to qemu_opts_parse()Michael Tokarev1-2/+2
This also introduces a new suboption, "cpus=", which is the default. So after this patch, -smp n,sockets=y is the same as -smp cpus=n,sockets=y (with "cpu" being some generic thing, referring to either cores, or threads, or sockets, as before). We still don't validate relations between different numbers, for example it is still possible to say -smp 1,sockets=10 and it will be accepted to mean sockets=1. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Message-id: 1372072012-30305-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-24Merge remote-tracking branch 'spice/spice.v71' into stagingAnthony Liguori1-2/+5
# By Gerd Hoffmann (1) and Hans de Goede (1) # Via Gerd Hoffmann * spice/spice.v71: spice: Add -spice disable-agent-file-transfer cmdline option (rhbz#961850) qxl: fix Coverity scan SIGN_EXTENSION error Message-id: 1372060666-18182-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-24spice: Add -spice disable-agent-file-transfer cmdline option (rhbz#961850)Hans de Goede1-2/+5
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-21qemu-options: trivial fix for -mon args helpMichael Tokarev1-2/+2
It is the (implied sub)option name which is optional, not the value of that (sub)option, make it so in the help output. (Introduced by commit 22a0e04b9bb) Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-19doc: Drop ref to Bochs from -no-fd-bootchk documentationMarkus Armbruster1-2/+1
Manual page and qemu-doc on talk about "Bochs BIOS". We use SeaBIOS, and it implements the feature. Replace by just "BIOS", and drop the TODO line wondering about the Bochs reference. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1371208516-7857-7-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-23monitor: allow to disable the default monitorLuiz Capitulino1-0/+1
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-05-22chardev: Make the name of memory device consistentLei Li1-3/+3
Now we have memory char device, but the backend name of it is a little confusion. We actually register it by 'memory', but the description in qemu-option, the name of open functions and the new api backend called it 'ringbuf'. It should keep consistent. This patch named it all to 'memory'. Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1369132079-11377-2-git-send-email-lilei@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-03TLS support for VNC WebsocketsTim Hardeck1-0/+2
Added TLS support to the VNC QEMU Websockets implementation. VNC-TLS needs to be enabled for this feature to be used. The required certificates are specified as in case of VNC-TLS with the VNC parameter "x509=<path>". If the server certificate isn't signed by a rooth authority it needs to be manually imported in the browser because at least in case of Firefox and Chrome there is no user dialog, the connection just gets canceled. As a side note VEncrypt over Websocket doesn't work atm because TLS can't be stacked in the current implementation. (It also didn't work before) Nevertheless to my knowledge there is no HTML 5 VNC client which supports it and the Websocket connection can be encrypted with regular TLS now so it should be fine for most use cases. Signed-off-by: Tim Hardeck <thardeck@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1366727581-5772-1-git-send-email-thardeck@suse.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22Add option to mlock qemu and guest memorySatoru Moriya1-0/+13
In certain scenario, latency induced by paging is significant and memory locking is needed. Also, in the scenario with untrusted guests, latency improvement due to mlock is desired. This patch introduces a following new option to mlock guest and qemu memory: -realtime mlock=on|off Signed-off-by: Satoru Moriya <satoru.moriya@hds.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366382526-26146-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-15block: Add support for Secure Shell (ssh) block device.Richard W.M. Jones1-0/+12
qemu-system-x86_64 -drive file=ssh://hostname/some/image QEMU will ssh into 'hostname' and open '/some/image' which is made available as a standard block device. You can specify a username (ssh://user@host/...) and/or a port number (ssh://host:port/...). You can also use an alternate syntax using properties (file.user, file.host, file.port, file.path). Current limitations: - Authentication must be done without passwords or passphrases, using ssh-agent. Other authentication methods are not supported. - Uses a single connection, instead of concurrent AIO with multiple SSH connections. This is implemented using libssh2 on the client side. The server just requires a regular ssh daemon with sftp-server support. Most ssh daemons on Unix/Linux systems will work out of the box. Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Cc: Stefan Hajnoczi <stefanha@gmail.com> Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-03help: add docs for missing 'queues' option of tapJason Wang1-1/+2
Cc: Markus Armbruster <armbru@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com> Message-id: 1361545072-30426-1-git-send-email-jasowang@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-25QMP: TPM QMP and man page documentation updatesCorey Bryant1-1/+2
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-22Fix typos and misspellingsPeter Maydell1-1/+1
Fix various typos and misspellings. The bulk of these were found with codespell. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-19add a boot option to do strict bootAmos Kong1-2/+6
Seabios already added a new device type to halt booting. Qemu can add "HALT" at the end of bootindex string, then seabios will halt booting after trying to boot from all selected devices. This patch added a new boot option to configure if boot from un-selected devices. This option only effects when boot priority is changed by bootindex options, the old style(-boot order=..) will still try to boot from un-selected devices. v2: add HALT entry in get_boot_devices_list() v3: rebase to latest qemu upstream Signed-off-by: Amos Kong <akong@redhat.com> Message-id: 1363674207-31496-1-git-send-email-akong@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-12Add support for cancelling of a TPM commandStefan Berger1-3/+10
This patch adds support for cancelling an executing TPM command. In Linux for example a user can cancel a command through the TPM's sysfs 'cancel' entry using echo "1" > /sysfs/class/misc/tpm0/device/cancel This patch propagates the cancellation of a command inside a VM to the host TPM's sysfs entry. It also uses the possibility to cancel the command before QEMU VM shutdown or reboot, which helps in preventing QEMU from hanging while waiting for the completion of the command. To relieve higher layers or users from having to determine the TPM's cancel sysfs entry, the driver searches for the entry in well known locations. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com> Message-id: 1361987275-26289-7-git-send-email-stefanb@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-12Add a TPM Passthrough backend driver implementationStefan Berger1-1/+35
This patch is based of off version 9 of Stefan Berger's patch series "QEMU Trusted Platform Module (TPM) integration" and adds a new backend driver for it. This patch adds a passthrough backend driver for passing commands sent to the emulated TPM device directly to a TPM device opened on the host machine. Thus it is possible to use a hardware TPM device in a system running on QEMU, providing the ability to access a TPM in a special state (e.g. after a Trusted Boot). This functionality is being used in the acTvSM Trusted Virtualization Platform which is available on [1]. Usage example: qemu-system-x86_64 -tpmdev passthrough,id=tpm0,path=/dev/tpm0 \ -device tpm-tis,tpmdev=tpm0 \ -cdrom test.iso -boot d Some notes about the host TPM: The TPM needs to be enabled and activated. If that's not the case one has to go through the BIOS/UEFI and enable and activate that TPM for TPM commands to work as expected. It may be necessary to boot the kernel using tpm_tis.force=1 in the boot command line or 'modprobe tpm_tis force=1' in case of using it as a module. Regards, Andreas Niederl, Stefan Berger [1] http://trustedjava.sourceforge.net/ Signed-off-by: Andreas Niederl <andreas.niederl@iaik.tugraz.at> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com> Message-id: 1361987275-26289-6-git-send-email-stefanb@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-12Support for TPM command line optionsStefan Berger1-0/+33
This patch adds support for TPM command line options. The command line options supported here are ./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id> -device tpm-tis,tpmdev=<id>,id=<other id> and ./qemu-... -tpmdev help where the latter works similar to -soundhw help and shows a list of available TPM backends (for example 'passthrough'). Using the type parameter, the backend is chosen, i.e., 'passthrough' for the passthrough driver. The interpretation of the other parameters along with determining whether enough parameters were provided is pushed into the backend driver, which needs to implement the interface function 'create' and return a TPMDriverOpts structure if the VM can be started or 'NULL' if not enough or bad parameters were provided. Monitor support for 'info tpm' has been added. It for example prints the following: (qemu) info tpm TPM devices: tpm0: model=tpm-tis \ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com> Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08Fix the wrong description in qemu manualLei Li1-1/+1
Fix LP#1151450 the wrong description in qemu manual: 'qemu-system-x86_84' should be 'qemu-system-x86_64'. Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-04Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori1-14/+4
# By MORITA Kazutaka (5) and others # Via Stefan Hajnoczi * stefanha/block: block: for HMP commit() operations on 'all', skip non-COW drives sheepdog: add support for connecting to unix domain socket sheepdog: use inet_connect to simplify connect code sheepdog: accept URIs move socket_set_nodelay to osdep.c slirp/tcp_subr.c: fix coding style in tcp_connect dataplane: remove EventPoll in favor of AioContext virtio-blk: fix unplug + virsh reboot ide/macio: Fix macio DMA initialisation.
2013-03-04sheepdog: add support for connecting to unix domain socketMORITA Kazutaka1-1/+1
This patch adds support for a unix domain socket for a connection between qemu and local sheepdog server. You can use the unix domain socket with the following syntax: $ qemu sheepdog+unix:///<vdiname>?socket=<socket path>[#snapid] Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-04sheepdog: accept URIsMORITA Kazutaka1-14/+4
The URI syntax is consistent with the NBD and Gluster syntax. The syntax is sheepdog[+tcp]://[host:port]/vdiname[#snapid|#tag] Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27doc: document -netdev hubportStefan Hajnoczi1-1/+10
Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-26qemu-log: default to stderr for logging outputPeter Maydell1-5/+5
Switch the default for qemu_log logging output from "/tmp/qemu.log" to stderr. This is an incompatible change in some sense, but logging is mostly used for debugging purposes so it shouldn't affect production use. The previous behaviour can be obtained by adding "-D /tmp/qemu.log" to the command line. This change requires us to: * update all the documentation/help text (we take the opportunity to smooth out minor inconsistencies between the phrasing in linux-user/bsd-user/system help messages) * make linux-user and bsd-user defer to qemu-log for the default logging destination rather than overriding it themselves * ensure that all logfile closing is done via qemu_log_close() and that that function doesn't close stderr as well as the obvious change to the behaviour of do_qemu_set_log() when no logfile name has been specified. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1361901160-28729-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-22blockdev: add discard suboption to -drivePaolo Bonzini1-0/+2
Add support for BDRV_O_UNMAP from the QEMU command-line. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-21help: add docs for multiqueue tap optionsJason Wang1-1/+3
Cc: Markus Armbruster <armbru@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-id: 1361354641-51969-1-git-send-email-jasowang@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-18doc help: Collect block device stuff under its own headingMarkus Armbruster1-291/+281
Collect them from "Standard options", "File system options", "Virtual File system pass-through options", "Debug/Expert options". Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1360781383-28635-8-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-18doc help: A few options are under inappropriate headings, fixMarkus Armbruster1-41/+39
--device is under heading "USB options". --name and --uuid are under "Virtual File system pass-through options". Move all three to "Standard options". Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1360781383-28635-7-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-18help: Fix markup of heading "USB options" so it appears in -helpMarkus Armbruster1-1/+2
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1360781383-28635-6-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-18doc: Fix texinfo @table markup in qemu-options.hxMarkus Armbruster1-19/+37
End tables before headings, start new ones afterwards. Fixes incorrect indentation of headings "File system options" and "Virtual File system pass-through options" in manual page and qemu-doc. Normalize markup some to increase chances it survives future edits. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1360781383-28635-5-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-18doc: Fill some option doc gaps in manual page and qemu-docMarkus Armbruster1-4/+12
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1360781383-28635-4-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-18doc: Fix some option entries in qemu-doc's function indexMarkus Armbruster1-2/+5
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1360781383-28635-3-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-18help: Drop bogus help on -qtest and -qtest-logMarkus Armbruster1-7/+3
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1360781383-28635-2-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-13chardev: Fix manual page and qemu-doc for -chardev ttyMarkus Armbruster1-1/+1
Broken in commit d59044ef. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1360767256-610-2-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06qemu-char: Saner naming of memchar stuff & doc fixesMarkus Armbruster1-8/+5
New device, has never been released, so we can still improve things without worrying about compatibility. Naming is a mess. The code calls the device driver CirMemCharDriver, the public API calls it "memory", "memchardev", or "memchar", and the special commands are named like "memchar-FOO". "memory" is a particularly unfortunate choice, because there's another character device driver called MemoryDriver. Moreover, the device's distinctive property is that it's a ring buffer, not that's in memory. Therefore: * Rename CirMemCharDriver to RingBufCharDriver, and call the thing a "ringbuf" in the API. * Rename QMP and HMP commands from memchar-FOO to ringbuf-FOO. * Rename device parameter from maxcapacity to size (simple words are good for you). * Clearly mark the parameter as optional in documentation. * Fix error reporting so that chardev-add reports to current monitor, not stderr. * Replace cirmem in C identifiers by ringbuf. * Rework documentation. Document the impact of our crappy UTF-8 handling on reading. * QMP examples that even work. I could split this up into multiple commits, but they'd change the same documentation lines multiple times. Not worth it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-25qemu-char: Add new char backend CirMemCharDriverLei Li1-0/+10
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-21vnc: added initial websocket protocol supportTim Hardeck1-0/+8
This patch adds basic Websocket Protocol version 13 - RFC 6455 - support to QEMU VNC. Binary encoding support on the client side is mandatory. Because of the GnuTLS requirement the Websockets implementation is optional (--enable-vnc-ws). To activate Websocket support the VNC option "websocket"is used, for example "-vnc :0,websocket". The listen port for Websocket connections is (5700 + display) so if QEMU VNC is started with :0 the Websocket port would be 5700. As an alternative the Websocket port could be manually specified by using ",websocket=<port>" instead. Parts of the implementation base on Anthony Liguori's QEMU Websocket patch from 2010 and on Joel Martin's LibVNC Websocket implementation. Signed-off-by: Tim Hardeck <thardeck@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-16chardev: add parallel chardev support to chardev-add (qmp)Gerd Hoffmann1-1/+4
Also alias the old parport name to parallel for -chardev. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.1 at 2024-12-27 12:13:44 +0000