aboutsummaryrefslogtreecommitdiff
path: root/qemu-options.hx
AgeCommit message (Collapse)AuthorFilesLines
2017-01-19Plumb the HAXM-based hardware acceleration supportVincent Palatin1-0/+11
Use the Intel HAX is kernel-based hardware acceleration module for Windows (similar to KVM on Linux). Based on the "target/i386: Add Intel HAX to android emulator" patch from David Chou <david.j.chou@intel.com> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Message-Id: <7b9cae28a0c379ab459c7a8545c9a39762bd394f.1484045952.git.vpalatin@chromium.org> [Drop hax_populate_ram stub. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16hxtool: emit Texinfo headings as @subsectionPaolo Bonzini1-12/+19
Remove the colon, and add it in qemu-options-wrapper.h instead. The introduction of @subsection also found a case where the table was not closed and reopened around a heading, so fix it. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-05qemu-doc: update gluster protocol usage guidePrasanna Kumar Kalever1-2/+23
Document: 1. The new debug and logfile options with their usages 2. New json format and its usage and 3. update "GlusterFS, Device URL Syntax" section in "Invocation" Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-14block/curl: Drop TFTP "support"Max Reitz1-3/+3
Because TFTP does not support byte ranges, it was never usable with our curl block driver. Since apparently nobody has ever complained loudly enough for someone to take care of the issue until now, it seems reasonable to assume that nobody has ever actually used it. Therefore, it should be safe to just drop it from curl's protocol list. [Jeff Cody: Below is additional summary pulled, with some rewording, from followup emails between Max and Markus, to explain what worked and what didn't] TFTP would sometimes work, to a limited extent, for images <= the curl "readahead" size, so long as reads started at offset zero. By default, that readahead size is 256KB. Reads starting at a non-zero offset would also have returned data from a zero offset. It can become more complicated still, with mixed reads at zero offset and non-zero offsets, due to data buffering. In short, TFTP could only have worked before in very specific scenarios with unrealistic expectations and constraints. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 20161102175539.4375-4-mreitz@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-03Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingStefan Hajnoczi1-0/+18
virtio, pc: fixes and features nvdimm hotplug support virtio migration and ioeventfd rework virtio crypto device ipmi fixes Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 01 Nov 2016 05:23:40 PM GMT # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (47 commits) acpi: fix assert failure caused by commit 35c5a52d acpi/ipmi: Initialize the fwinfo before fetching it ipmi: Add graceful shutdown handling to the external BMC ipmi: fix build config variable name for ipmi_bmc_extern.o ipmi: Implement shutdown via ACPI overtemp ipmi: chassis poweroff should use qemu_system_shutdown_request() ipmi_bmc_sim: Remove an unnecessary mutex ipmi: Remove hotplug from IPMI BMCs pc: memhp: enable nvdimm device hotplug nvdimm acpi: introduce _FIT nvdimm acpi: introduce fit buffer nvdimm acpi: prebuild nvdimm devices for available slots nvdimm acpi: use common macros instead of magic names acpi nvdimm: rename result_size to dsm_out_buf_siz nvdimm acpi: compile nvdimm acpi code arch-independently acpi nvdimm: fix Arg6 usage acpi nvdimm: fix ARG3 conflict acpi nvdimm: fix device physical address base acpi nvdimm: fix OperationRegion definition acpi nvdimm: fix wrong buffer size returned by DSM method ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-30cryptodev: introduce a new cryptodev backendGonglei1-0/+18
The new cryptodev backend named cryptodev-builtin, which realized by QEMU cipher APIs. These APIs can be backed by either nettle or gcrypt. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-28monitor: deprecate 'default' optionMarc-André Lureau1-4/+4
This option does nothing since commit 06ac27f. Deprecate it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-28qemu-options.hx: set: fix copy-paste errorMichael Tokarev1-1/+1
Reported-By: Daniel Shahaf <danielsh@apache.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-28filter-dump: add missing "["Changlong Xie1-1/+1
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-08qemu-options.hx: fix -chardev ringbuf typosStefan Hajnoczi1-1/+1
Clean up the documentation for -chardev ringbuf. There is a stray closing parenthesis and the comma is unnecessary. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-09-27tap: Allow specifying a bridgeAlexey Kardashevskiy1-5/+7
The tap backend is already using qemu-bridge-helper to attach tap interface to a bridge but (unlike the bridge backend) it always uses the default bridge name - br0. This adds a "br" property support to the tap backend. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Greg Kurz <groug@kaod.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27filter-rewriter: introduce filter-rewriter initializationZhang Chen1-0/+13
Filter-rewriter is a part of COLO project. It will rewrite some of secondary packet to make secondary guest's tcp connection established successfully. In this module we will rewrite tcp packet's ack to the secondary from primary,and rewrite tcp packet's seq to the primary from secondary. usage: colo secondary: -object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0 -object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 -object filter-rewriter,id=rew0,netdev=hn0,queue=all Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27colo-compare: introduce colo compare initializationZhang Chen1-0/+39
This a COLO net ascii figure: Primary qemu Secondary qemu +--------------------------------------------------------------+ +----------------------------------------------------------------+ | +----------------------------------------------------------+ | | +-----------------------------------------------------------+ | | | | | | | | | | | guest | | | | guest | | | | | | | | | | | +-------^--------------------------+-----------------------+ | | +---------------------+--------+----------------------------+ | | | | | | ^ | | | | | | | | | | | | +------------------------------------------------------+ | | | | |netfilter| | | | | | netfilter | | | | +----------+ +----------------------------+ | | | +-----------------------------------------------------------+ | | | | | | | out | | | | | | filter excute order | | | | | | +-----------------------------+ | | | | | | +-------------------> | | | | | | | | | | | | | | | | TCP | | | | +-----+--+-+ +-----v----+ +-----v----+ |pri +----+----+sec| | | | +------------+ +---+----+---v+rewriter++ +------------+ | | | | | | | | | | |in | |in | | | | | | | | | | | | | | | | filter | | filter | | filter +------> colo <------+ +--------> filter +--> adjust | adjust +--> filter | | | | | | mirror | |redirector| |redirector| | | compare | | | | | | redirector | | ack | seq | | redirector | | | | | | | | | | | | | | | | | | | | | | | | | | | | | +----^-----+ +----+-----+ +----------+ | +---------+ | | | | +------------+ +--------+--------------+ +---+--------+ | | | | | tx | rx rx | | | | | tx all | rx | | | | | | | | | | +-----------------------------------------------------------+ | | | | +--------------+ | | | | | | | | | filter excute order | | | | | | | | | | +----------------> | | | +--------------------------------------------------------+ | | +-----------------------------------------+ | | | | | | | | | +--------------------------------------------------------------+ +----------------------------------------------------------------+ |guest receive | guest send | | +--------+----------------------------v------------------------+ | | NOTE: filter direction is rx/tx/all | tap | rx:receive packets sent to the netdev | | tx:receive packets sent by the netdev +--------------------------------------------------------------+ In COLO-compare, we do packet comparing job. Packets coming from the primary char indev will be sent to outdev. Packets coming from the secondary char dev will be dropped after comparing. colo-comapre need two input chardev and one output chardev: primary_in=chardev1-id (source: primary send packet) secondary_in=chardev2-id (source: secondary send packet) outdev=chardev3-id usage: primary: -netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown -device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66 -chardev socket,id=mirror0,host=3.3.3.3,port=9003,server,nowait -chardev socket,id=compare1,host=3.3.3.3,port=9004,server,nowait -chardev socket,id=compare0,host=3.3.3.3,port=9001,server,nowait -chardev socket,id=compare0-0,host=3.3.3.3,port=9001 -chardev socket,id=compare_out,host=3.3.3.3,port=9005,server,nowait -chardev socket,id=compare_out0,host=3.3.3.3,port=9005 -object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0 -object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out -object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0 -object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0 secondary: -netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,down script=/etc/qemu-ifdown -device e1000,netdev=hn0,mac=52:a4:00:12:78:66 -chardev socket,id=red0,host=3.3.3.3,port=9003 -chardev socket,id=red1,host=3.3.3.3,port=9004 -object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0 -object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-15Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-17/+24
* minor patches here and there * MTTCG: lock-free TB lookup * SCSI: bugfixes for MPTSAS, MegaSAS, LSI53c, vmw_pvscsi * buffer_is_zero rewrite (except for one patch) * chardev: qemu_chr_fe_write checks * checkpatch improvement for markdown preformatted text * default-configs cleanups * atomics cleanups # gpg: Signature made Tue 13 Sep 2016 18:14:30 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (58 commits) cutils: Add generic prefetch cutils: Add SSE4 version cutils: Add test for buffer_is_zero cutils: Remove ppc buffer zero checking cutils: Remove aarch64 buffer zero checking cutils: Rearrange buffer_is_zero acceleration cutils: Export only buffer_is_zero cutils: Remove SPLAT macro cutils: Move buffer_is_zero and subroutines to a new file ppc: do not redefine CPUPPCState x86/lapic: Load LAPIC state at post_load optionrom: do not rely on compiler's bswap optimization checkpatch: Fix whitespace checks for documentation code blocks atomics: Use __atomic_*_n() variant primitives atomics: Remove redundant barrier()'s kvm-all: drop kvm_setup_guest_memory i8257: Make device "i8257" unavailable with -device Revert "megasas: remove useless check for cmd->frame" char: convert qemu_chr_fe_write to qemu_chr_fe_write_all hw: replace most use of qemu_chr_fe_write with qemu_chr_fe_write_all ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: cpus.c tests/Makefile.include
2016-09-13chardev: Add 'help' option to print all available chardev backend typesLin Ma1-0/+3
Signed-off-by: Lin Ma <lma@suse.com> Message-Id: <20160816171352.17021-1-lma@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13help: Update help to remove misleading display informationColin Lord1-17/+21
Updates the help messages to remove misleading information about SDL being the normal display used. Signed-off-by: Colin Lord <cdlord2@illinois.edu> Message-Id: <1471030248-21637-1-git-send-email-cdlord2@illinois.edu> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13Document that curses usually needs -k option tooSamuel Thibault1-1/+1
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-09-13qemu-options.hx: correct spice options streaming-video default document ↵Li Zhijian1-1/+1
value to 'off' since f1d3e58, the code had changed the default value to 'off', so this patch make document and code are consistent. Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Message-id: 1470024419-10886-1-git-send-email-lizhijian@cn.fujitsu.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-08-03Reorganize help output of '-display' optionRobert Ho1-7/+22
The '-display' help information is not very correct. This patch sort it a little. Also, in its help information, reveals what implicit display option will be chosen if no definition. Signed-off-by: Robert Ho <robert.hu@intel.com> Message-Id: <1469528231-26206-1-git-send-email-robert.hu@intel.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-07tap: vhost busy polling supportJason Wang1-0/+3
This patch add the capability of basic vhost net busy polling which is supported by recent kernel. User could configure the maximum number of us that could be spent on busy polling through a new property of tap "poll-us". Cc: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-04machine: remove iommu propertyMarcel Apfelbaum1-3/+0
Since iommu devices can be created with '-device' there is no need to keep iommu as machine and mch property. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-28doc: move text describing --trace to specific .texi fileDenis V. Lunev1-26/+1
This text will be included to qemu-nbd/qemu-img mans in the next patches. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1466174654-30130-3-git-send-email-den@openvz.org CC: Paolo Bonzini <pbonzini@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-28doc: sync help description for --trace with man for qemu.1Denis V. Lunev1-1/+1
[s/descriprion/description/ in commit message as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1466174654-30130-2-git-send-email-den@openvz.org CC: Paolo Bonzini <pbonzini@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20trace: add build framework for merging trace-events filesDaniel P. Berrange1-4/+4
Switch make rules over to use trace-events-all as the master trace events input file. Add rule that will construct trace-events-all from $(trace-events-y). Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-2-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-16vl.c: Add '-L help' which lists data dirs.Richard W.M. Jones1-0/+2
QEMU compiles a list of data directories from various sources. When consuming a QEMU binary it's useful to be able to get this list of data directories: a primary reason is so you can list what BIOSes or keymaps ship with this version of QEMU. However without reproducing the method that QEMU uses internally, it's not possible to get the list of data directories. This commit adds a simple '-L help' option that just lists out the data directories as qemu calculates them: $ ./x86_64-softmmu/qemu-system-x86_64 -L help /home/rjones/d/qemu/pc-bios /usr/local/share/qemu $ ./x86_64-softmmu/qemu-system-x86_64 -L /tmp -L help /tmp /home/rjones/d/qemu/pc-bios /usr/local/share/qemu Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1463416475-11728-2-git-send-email-rjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-08Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-0/+7
* max-ram-below-4g improvement (Gerd) * escc fix (xiaoqiang) * ESP fix (Prasad) * scsi-disk tweaks/fix (me) * Makefile dependency fixes (me) * PKGVERSION improvement (Fam) * -vnc man improvement (Robert) # gpg: Signature made Tue 07 Jun 2016 18:06:22 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: vnc: list the 'to' parameter of '-vnc' in the qemu man page scsi-disk: add missing break Makefile: Derive "PKGVERSION" from "git describe" by default Makefile: add dependency on scripts/hxtool Makefile: add dependency on scripts/make_device_config.sh Makefile: add dependency on scripts/create_config Makefile: Add a "FORCE" target scsi: megasas: null terminate bios version buffer scsi: mark TYPE_SCSI_DISK_BASE as abstract scsi: esp: check TI buffer index before read/write hw/char: QOM'ify escc.c (fix) pc: allow raising low memory via max-ram-below-4g option tests: Rename tests/Makefile to tests/Makefile.include Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-07qemu-options.hx: Specify the units for -machine kvm_shadow_memPeter Maydell1-1/+1
The -machine kvm_shadow_mem option takes a size in bytes; say so explicitly in its documentation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reported-by: Tobi (github.com/tobimensch) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-07docs: "specify" spell fixMichael Tokarev1-2/+2
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-06-07vnc: list the 'to' parameter of '-vnc' in the qemu man pageRobert Ho1-0/+7
Signed-off-by: Robert Ho <robert.hu@intel.com> Message-Id: <1464678190-9290-2-git-send-email-robert.hu@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-03vnc: add configurable keyboard delayGerd Hoffmann1-0/+8
Limits the rate kbd events from the vnc server are forwarded to the guest, so input devices which are typically low-bandwidth can keep up even on bulky input. v2: update documentation too. v3: spell fixes. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Yang Hongyang <hongyang.yang@easystack.cn> Message-id: 1464762150-25817-1-git-send-email-kraxel@redhat.com
2016-04-19fw_cfg: Adopt /opt/RFQDN conventionMarkus Armbruster1-5/+19
FW CFG's primary user is QEMU, which uses it to expose configuration information (in the widest sense) to Firmware. Thus the name FW CFG. FW CFG can also be used by others for their own purposes. QEMU is merely acting as transport then. Names starting with opt/ are reserved for such uses. There is no provision, however, to guide safe sharing among different such users. Fix that, loosely following QMP precedence: names should start with opt/RFQDN/, where RFQDN is a reverse fully qualified domain name you control. Based on a more ambitious patch from Michael Tsirkin. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Gabriel L. Somlo <somlo@cmu.edu> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2016-04-05crypto: fix typo in docs for secret object typeDaniel P. Berrange1-1/+1
The docs for the secret object type specified the wrong number of bytes for the AES initialization vector. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-04-01slirp: Allow disabling IPv4 or IPv6Samuel Thibault1-2/+6
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and IPv6-only network environments. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-30net/filter-mirror: implement filter-redirectorZhang Chen1-0/+9
Filter-redirector is a netfilter plugin. It gives qemu the ability to redirect net packet. redirector can redirect filter's net packet to outdev. and redirect indev's packet to filter. filter + redirector | +--------------+ | | | indev +-----------+ +----------> outdev | | | +--------------+ | v filter usage: -netdev user,id=hn0 -chardev socket,id=s0,host=ip_primary,port=X,server,nowait -chardev socket,id=s1,host=ip_primary,port=Y,server,nowait -filter-redirector,id=r0,netdev=hn0,queue=tx/rx/all,indev=s0,outdev=s1 Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-30net/filter-mirror:Add filter-mirrorZhang Chen1-0/+5
Filter-mirror is a netfilter plugin. It gives qemu the ability to mirror packets to a chardev. usage: -netdev tap,id=hn0 -chardev socket,id=mirror0,host=ip_primary,port=X,server,nowait -filter-mirror,id=m0,netdev=hn0,queue=tx/rx/all,outdev=mirror0 Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-29Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into ↵Peter Maydell1-8/+10
staging slirp updates # gpg: Signature made Tue 29 Mar 2016 00:16:05 BST using RSA key ID FB6B2F1D # gpg: Good signature from "Samuel Thibault <samuel.thibault@gnu.org>" # gpg: aka "Samuel Thibault <sthibault@debian.org>" # gpg: aka "Samuel Thibault <samuel.thibault@inria.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@labri.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6 # Subkey fingerprint: F632 74CD C630 0873 CB3D 29D9 E3E5 1CE8 FB6B 2F1D * remotes/thibault/tags/samuel-thibault: Rework ipv6 options Use C99 flexible array instead of 1-byte trailing array Avoid embedding struct mbuf in other structures slirp: send icmp6 errors when UDP send failed slirp: Fix memory leak on small incoming ipv4 packet Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-29Rework ipv6 optionsSamuel Thibault1-8/+10
Rename the recently-added ip6-foo options into ipv6-foo options, to make them coherent with other ipv6 options. Also rework the documentation. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-03-24Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-0/+18
* Log filtering from Alex and Peter * Chardev fix from Marc-André * config.status tweak from David * Header file tweaks from Markus, myself and Veronia (Outreachy candidate) * get_ticks_per_sec() removal from Rutuja (Outreachy candidate) * Coverity fix from myself * PKE implementation from myself, based on rth's XSAVE support # gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (28 commits) target-i386: implement PKE for TCG config.status: Pass extra parameters char: translate from QIOChannel error to errno exec: fix error handling in file_ram_alloc cputlb: modernise the debug support qemu-log: support simple pid substitution for logs target-arm: dfilter support for in_asm qemu-log: dfilter-ise exec, out_asm, op and opt_op qemu-log: new option -dfilter to limit output qemu-log: Improve the "exec" TB execution logging qemu-log: Avoid function call for disabled qemu_log_mask logging qemu-log: correct help text for -d cpu tcg: pass down TranslationBlock to tcg_code_gen util: move declarations out of qemu-common.h Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND hw: explicitly include qemu-common.h and cpu.h include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h Move ParallelIOArg from qemu-common.h to sysemu/char.h Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: scripts/clean-includes
2016-03-24input-linux: switch over to -objectGerd Hoffmann1-9/+0
This patches makes input-linux use -object instead of a new command line switch. So, instead of the switch ... -input-linux /dev/input/event$nr ... you must create an object this way: -object input-linux,id=$name,evdev=/dev/input/event$nr Bonus is that you can hot-add and hot-remove them via monitor now. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1457681901-30916-1-git-send-email-kraxel@redhat.com
2016-03-22qemu-log: new option -dfilter to limit outputAlex Bennée1-0/+18
When debugging big programs or system emulation sometimes you want both the verbosity of cpu,exec et all but don't want to generate lots of logs for unneeded stuff. This patch adds a new option -dfilter which allows you to specify interesting address ranges in the form: -dfilter 0x8000..0x8fff,0xffffffc000080000+0x200,... Then logging code can use the new qemu_log_in_addr_range() function to decide if it will output logging information for the given range. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <1458052224-9316-7-git-send-email-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-15qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addressesYann Bordenave1-2/+16
This patch adds parameters to manage some new options in the qemu -net command. Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in argument to the qemu command. Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3. Signed-off-by: Yann Bordenave <meow@meowstars.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-10Merge remote-tracking branch 'remotes/kraxel/tags/pull-ui-20160309-1' into ↵Peter Maydell1-0/+9
staging add linux evdev support, vnc and console fixes. # gpg: Signature made Wed 09 Mar 2016 09:02:47 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-ui-20160309-1: ui/console: add escape sequence \e[5, 6n input-linux: add switch to enable auto-repeat events input-linux: add option to toggle grab on all devices input: linux evdev support vnc: send cursor when a new client is connecting Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-08input: linux evdev supportGerd Hoffmann1-0/+9
This patch adds support for reading input events directly from linux evdev devices and forward them to the guest. Unlike virtio-input-host which simply passes on all events to the guest without looking at them this will interpret the events and feed them into the qemu input subsystem. Therefore this is limited to what the qemu input subsystem and the emulated input devices are able to handle. Also there is no support for absolute coordinates (tablet/touchscreen). So we are talking here about basic mouse and keyboard support. The advantage is that it'll work without virtio-input drivers in the guest, the events are delivered to the usual ps/2 or usb input devices (depending on what the machine happens to have). And for keyboards qemu is able to switch the keyboard between guest and host on hotkey. The hotkey is hard-coded for now (both control keys), initialy the guest owns the keyboard. Probably most useful when assigning vga devices with vfio and using a physical monitor instead of vnc/spice/gtk as guest display. Usage: Add '-input-linux /dev/input/event<nr>' to the qemu command line. Note that udev has rules which populate /dev/input/by-{id,path} with static names, which might be more convinient to use. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1457087116-4379-2-git-send-email-kraxel@redhat.com
2016-03-08filter: Add 'status' property for filter objectzhanghailiang1-1/+3
With this property, users can control if this filter is 'on' or 'off'. The default behavior for filter is 'on'. For some types of filters, they may need to react to status changing, So here, we introduced status changing callback/notifier for filter class. We will skip the disabled ('off') filter when delivering packets in net layer. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Yang Hongyang <hongyang.yang@easystack.cn> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-07icount: possible options for sleep are on or offPranith Kumar1-3/+3
icount sleep takes on or off as options. A few places mention sleep=no which is not accepted. This patch corrects them. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Message-Id: <1456499811-16819-1-git-send-email-bobby.prani@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-28migration: allow machine to enforce configuration section migrationGreg Kurz1-1/+2
Migration of pseries-2.3 doesn't have configuration section. Unfortunately, QEMU 2.4/2.4.1/2.5 are buggy and always stream and expect the configuration section, and break migration both ways. This patch introduces a property which allows to enforce a configuration section for machines who don't have one. It can be set at startup: -machine enforce-config-section=on or later from the QEMU monitor: qom-set /machine enforce-config-section on It is up to the tooling to set or unset this property according to the version of the QEMU at the other end of the pipe. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-25Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-2/+43
* Asynchronous dump-guest-memory from Peter * improved logging with -D -daemonize from Dimitris * more address_space_* optimization from Gonglei * TCG xsave/xrstor thinko fix * chardev bugfix and documentation patch # gpg: Signature made Thu 25 Feb 2016 15:12:27 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: target-i386: fix confusion in xcr0 bit position vs. mask chardev: Properly initialize ChardevCommon components memory: Remove unreachable return statement memory: optimize qemu_get_ram_ptr and qemu_ram_ptr_length exec: store RAMBlock pointer into memory region log: Redirect stderr to logfile if deamonized dump-guest-memory: add qmp event DUMP_COMPLETED Dump: add hmp command "info dump" Dump: add qmp command "query-dump" DumpState: adding total_size and written_size fields dump-guest-memory: add "detach" support dump-guest-memory: disable dump when in INMIGRATE state dump-guest-memory: introduce dump_process() helper function. dump-guest-memory: add dump_in_progress() helper function dump-guest-memory: using static DumpState, add DumpStatus dump-guest-memory: add "detach" flag for QMP/HMP interfaces. dump-guest-memory: cleanup: removing dump_{error|cleanup}(). scripts/kvm/kvm_stat: Fix missing right parantheses and ".format(...)" qemu-options.hx: Improve documentation of chardev multiplexing mode Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-23spice: add opengl/virgl/dmabuf supportGerd Hoffmann1-0/+4
This adds support for dma-buf passing to spice. This makes virtio-gpu with 3d acceleration work with spice. Workflow: * virglrenderer renders the guest command stream into a texture. * qemu exports the texture as dma-buf and passes on that dma-buf to spice-server. * spice-server passes the dma-buf to spice-client, using unix socket file descriptor passing. * spice-client asks the window systems composer to render the dma-buf to the screen. Requires cutting edge spice (server) and spice-gtk (client) builds, from git master branch. Also requires libvirt managing your qemu instance, and using "virt-viewer --attach $guest". libvirt will connect spice-server and spice-client using unix sockets instead of tcp sockets then, which is required for file descriptor passing. Works for the local case (spice server and client on the same machine) only. Supporting remote too is planned (by feeding the dma-bufs into gpu-assisted video encoder), but not there yet. gl mode is turned off by default, use "-spice gl=on,$otherargs" to enable it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-02-19qemu-options.hx: Improve documentation of chardev multiplexing modePeter Maydell1-2/+43
The current documentation of chardev mux=on is rather brief and opaque; expand it to hopefully be a bit more helpful. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1455643738-6068-1-git-send-email-peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-06pc: set the OEM fields in the RSDT and the FADT from the SLICLaszlo Ersek1-0/+4
The Microsoft spec about the SLIC and MSDM ACPI tables at <http://go.microsoft.com/fwlink/p/?LinkId=234834> requires the OEM ID and OEM Table ID fields to be consistent between the SLIC and the RSDT/XSDT. That further affects the FADT, because a similar match between the FADT and the RSDT/XSDT is required by the ACPI spec in general. This patch wires up the previous three patches. Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS) Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS) Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86) Cc: Richard W.M. Jones <rjones@redhat.com> Cc: Aleksei Kovura <alex3kov@zoho.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Steven Newbury <steve@snewbury.org.uk> RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758 LP: https://bugs.launchpad.net/qemu/+bug/1533848 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Steven Newbury <steve@snewbury.org.uk>
generated by cgit v1.1 at 2024-12-26 04:47:18 +0000