aboutsummaryrefslogtreecommitdiff
path: root/qemu-io-cmds.c
AgeCommit message (Collapse)AuthorFilesLines
2014-12-12qemu-io: Add sigraise commandMax Reitz1-0/+46
abort() has the sometimes undesirable side-effect of generating a core dump. If that is not needed, SIGKILL has the same effect of abruptly crash qemu; without a core dump. Thus, -c abort is not always useful to simulate a qemu-io crash; therefore, this patch adds a new sigraise command which allows raising a signal. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1418032092-16813-2-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-23qemu-io: Respect early image end for mapMax Reitz1-1/+4
bdrv_is_allocated() may report zero clusters which most probably means the image (file) is shorter than expected. Respect this case in order to avoid an infinite loop. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20qemu-io-cmds: g_renew() can't fail, bury dead error handlingMarkus Armbruster1-10/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20block: Use g_new() & friends to avoid multiplying sizesMarkus Armbruster1-5/+5
g_new(T, n) is safer than g_malloc(sizeof(*v) * n) for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. Perhaps a conversion to g_malloc_n() would be neater in places, but that's merely four years old, and we can't use such newfangled stuff. This commit only touches allocations with size arguments of the form sizeof(T), plus two that use 4 instead of sizeof(uint32_t). We can make the others safe by converting to g_malloc_n() when it becomes available to us in a couple of years. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20block: Use g_new() & friends where that makes obvious senseMarkus Armbruster1-1/+1
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer, for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. Patch created with Coccinelle, with two manual changes on top: * Add const to bdrv_iterate_format() to keep the types straight * Convert the allocation in bdrv_drop_intermediate(), which Coccinelle inexplicably misses Coccinelle semantic patch: @@ type T; @@ -g_malloc(sizeof(T)) +g_new(T, 1) @@ type T; @@ -g_try_malloc(sizeof(T)) +g_try_new(T, 1) @@ type T; @@ -g_malloc0(sizeof(T)) +g_new0(T, 1) @@ type T; @@ -g_try_malloc0(sizeof(T)) +g_try_new0(T, 1) @@ type T; expression n; @@ -g_malloc(sizeof(T) * (n)) +g_new(T, n) @@ type T; expression n; @@ -g_try_malloc(sizeof(T) * (n)) +g_try_new(T, n) @@ type T; expression n; @@ -g_malloc0(sizeof(T) * (n)) +g_new0(T, n) @@ type T; expression n; @@ -g_try_malloc0(sizeof(T) * (n)) +g_try_new0(T, n) @@ type T; expression p, n; @@ -g_realloc(p, sizeof(T) * (n)) +g_renew(T, p, n) @@ type T; expression p, n; @@ -g_try_realloc(p, sizeof(T) * (n)) +g_try_renew(T, p, n) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-09block: prefer aio_poll to qemu_aio_waitPaolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-19qemu-io-cmds: Fixed typo in example for writev.Maria Kustova1-1/+1
Signed-off-by: Maria Kustova <maria.k@catit.be> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-13qemu-io: Fix warnings from static code analysisStefan Weil1-1/+1
Smatch complains about several global symbols which should be local. Add the missing 'static' attributes and move the 'extern' declaration of variable qemuio_misalign to qemu-io.h. This variable also changes the type from 'int' to 'bool' which better fits documents its use. Signed-off-by: Stefan Weil <sw@weilnetz.de> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-01-24qemu-io: New command 'sleep'Kevin Wolf1-0/+42
There is no easy way to check that a request correctly waits for a different request. With a sleep command we can at least approximate it. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22qemu-io: add command completionStefan Hajnoczi1-0/+15
Autocomplete qemu-io commands at the interactive prompt. Note this only completes command names and not their options. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-11-29blkdebug: add "remove_break" commandFam Zheng1-0/+22
This adds "remove_break" command which is the reverse of blkdebug command "break": it removes all breakpoints with given tag and resumes all the requests. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-28block: add flags to bdrv_*_write_zeroesPeter Lieven1-1/+1
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-10-11block/qapi: Human-readable ImageInfoSpecific dumpMax Reitz1-0/+9
Add a function for generically dumping the ImageInfoSpecific information in a human-readable format to block/qapi.c. Use this function in bdrv_image_info_dump and qemu-io-cmds.c:info_f to allow qemu-img info resp. qemu-io -c info to print that format specific information. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-06block: expect errors from bdrv_co_is_allocatedPaolo Bonzini1-0/+4
Some bdrv_is_allocated callers do not expect errors, but the fallback in qcow2.c might make other callers trip on assertion failures or infinite loops. Fix the callers to always look for errors. Cc: qemu-stable@nongnu.org Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22aio / timers: Untangle include filesAlex Bligh1-0/+1
include/qemu/timer.h has no need to include main-loop.h and doing so causes an issue for the next patch. Unfortunately various files assume including timers.h will pull in main-loop.h. Untangle this mess. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Interface cleanupKevin Wolf1-7/+7
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Move remaining helpers from cmd.cKevin Wolf1-0/+104
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Move functions for registering and running commandsKevin Wolf1-51/+141
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Move 'help' functionKevin Wolf1-1/+66
No reason to treat it different from other commands. Move it to qemu-io-cmds.c, adapt the coding style and register it like any other command. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Factor out qemuio_commandKevin Wolf1-0/+24
It's duplicated code. Move it to qemu-io-cmds.c because it's not dependent on any static data of the qemu-io tool. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06qemu-io: Split off commands to qemu-io-cmds.cKevin Wolf1-0/+1835
This is the implementation of all qemu-io commands that make sense to be called from the qemu monitor, i.e. everything except open, close and quit. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.1 at 2024-12-27 12:58:10 +0000