aboutsummaryrefslogtreecommitdiff
path: root/qemu-img.c
AgeCommit message (Collapse)AuthorFilesLines
2016-11-01Replication/Blockjobs: Create replication jobs as internalJohn Snow1-2/+3
Bubble up the internal interface to commit and backup jobs, then switch replication tasks over to using this methodology. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1477584421-1399-4-git-send-email-jsnow@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-10-28qemu-img: call aio_context_acquire/release around block jobPaolo Bonzini1-0/+6
This will be needed by bdrv_reopen_multiple, which calls bdrv_drain_all and thus will *release* the AioContext. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-Id: <1477565348-5458-17-git-send-email-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2016-10-25qapi: rename QmpOutputVisitor to QObjectOutputVisitorDaniel P. Berrange1-3/+3
The QmpOutputVisitor has no direct dependency on QMP. It is valid to use it anywhere that one wants a QObject. Rename it to better reflect its functionality as a generic QAPI to QObject converter. The commit before previous renamed the files, this one renames C identifiers. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1475246744-29302-6-git-send-email-berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Split into file rename and identifier rename] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-25qapi: rename *qmp-*-visitor* to *qobject-*-visitor*Daniel P. Berrange1-1/+1
The QMP visitors have no direct dependency on QMP. It is valid to use them anywhere that one has a QObject. Rename them to better reflect their functionality as a generic QObject to QAPI converter. This is the first of three parts: rename the files. The next two parts will rename C identifiers. The split is necessary to make git rename detection work. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Split into file and identifier rename, two comments touched up] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-24block: failed qemu-img command should return non-zero exit codeXu Tian1-0/+2
If the backing file cannot be opened when doing qemu-img rebase, the variable 'ret' was not assigned a non-zero value, and the qemu-img process terminated with exit code zero. Fix this. Signed-off-by: Xu Tian <xutian@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-24Put the copyright information on a separate lineThomas Huth1-1/+1
The output string QEMU with "--version" is very long, it does not fit into a normal line of a terminal window anymore. By putting the copyright information on a separate line instead, the output looks much nicer. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1475661284-30153-1-git-send-email-thuth@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-12trace: provide mechanism for registering trace eventsDaniel P. Berrange1-0/+1
Remove the notion of there being a single global array of trace events, by introducing a method for registering groups of events. The module_call_init() needs to be invoked at the start of any program that wants to make use of the trace support. Currently this covers system emulators qemu-nbd, qemu-img and qemu-io. [Squashed the following fix from Daniel P. Berrange <berrange@redhat.com>: linux-user/bsd-user: initialize trace events subsystem The bsd-user/linux-user programs make use of the CPU emulation code and this now requires that the trace events subsystem is enabled, otherwise it'll crash trying to allocate an empty trace events bitmap for the CPU object. --Stefan] Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-14-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-20qemu-img: add skip option to ddReda Sallahi1-5/+45
This adds the skip option which allows qemu-img dd to skip a number of blocks before copying the input. A test case was added to test the skip option. Signed-off-by: Reda Sallahi <fullmanet@gmail.com> Message-id: 20160810141609.32727-1-fullmanet@gmail.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-09-20qemu-img: add the 'dd' subcommandReda Sallahi1-1/+302
This patch adds a basic dd subcommand analogous to dd(1) to qemu-img. For the start, this implements the bs, if, of and count options and requires both if and of to be specified (no stdin/stdout if not specified) and doesn't support tty, pipes, etc. The image format must be specified with -O for the output if the raw format is not the intended one. Two tests are added to test qemu-img dd. Signed-off-by: Reda Sallahi <fullmanet@gmail.com> Message-id: 20160810024312.14544-1-fullmanet@gmail.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> [mreitz: Moved test 158 to 170] Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-09-13mirror: auto complete active commitWen Congyang1-1/+1
Auto complete mirror job in background to prevent from blocking synchronously Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com> Signed-off-by: Wang WeiWei <wangww.fnst@cn.fujitsu.com> Message-id: 1469602913-20979-7-git-send-email-xiecl.fnst@cn.fujitsu.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-05block: remove BlockDriver.bdrv_write_compressedPavel Butsykin1-1/+1
There are no block drivers left that implement the old .bdrv_write_compressed interface, so it can be removed. Also now we have no need to use the bdrv_pwrite_compressed function and we can remove it entirely. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05block/io: reuse bdrv_co_pwritev() for write compressedPavel Butsykin1-1/+1
For bdrv_pwrite_compressed() it looks like most of the code creating coroutine is duplicated in bdrv_prwv_co(). So we can just add a flag (BDRV_REQ_WRITE_COMPRESSED) and use bdrv_prwv_co() as a generic one. In the end we get coroutine oriented function for write compressed by using bdrv_co_pwritev/blk_co_pwritev with BDRV_REQ_WRITE_COMPRESSED flag. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05block: switch blk_write_compressed() to byte-based interfacePavel Butsykin1-2/+4
This is a preparatory patch, which continues the general trend of the transition to the byte-based interfaces. bdrv_check_request() and blk_check_request() are no longer used, thus we can remove them. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-08-11Update ancient copyright string in -version outputPeter Maydell1-1/+1
Currently the -version command line argument prints a string ending with "Copyright (c) 2003-2008 Fabrice Bellard". This is now some eight years out of date; abstract it out of the several places that print the string and update it to: Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers to reflect the work by all the QEMU Project contributors over the last decade. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1470309276-5012-1-git-send-email-peter.maydell@linaro.org
2016-08-08error: Strip trailing '\n' from error string arguments (again)Markus Armbruster1-2/+2
Commit 9af9e0f, 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they keep coming back. checkpatch.pl tries to flag them since commit 5d596c2, but it's not very good at it. Offenders tracked down with Coccinelle script scripts/coccinelle/err-bad-newline.cocci, an updated version of the script from commit 312fd5f. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1470224274-31522-2-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-07-13qemu-img: Use strerror() for generic resize errorMax Reitz1-1/+1
Emitting the plain error number is not very helpful. Use strerror() instead. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20160615153630.2116-2-mreitz@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-07-13qemu-img: Set the ID of the block job in img_commit()Alberto Garcia1-1/+1
img_commit() creates a block job without an ID. This is no longer allowed now that we require it to be unique and well-formed. We were solving this by having a fallback in block_job_create(), but now that we extended the API of commit_active_start() we can finally set an explicit ID and revert that change. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13commit: Add 'job-id' parameter to 'block-commit'Alberto Garcia1-1/+1
This patch adds a new optional 'job-id' parameter to 'block-commit', allowing the user to specify the ID of the block job to be created. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-06Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-07-06' into ↵Peter Maydell1-17/+15
staging QAPI patches for 2016-07-06 # gpg: Signature made Wed 06 Jul 2016 10:00:51 BST # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2016-07-06: replay: Use new QAPI cloning sockets: Use new QAPI cloning qapi: Add new clone visitor qapi: Add new visit_complete() function tests: Factor out common code in qapi output tests tests: Clean up test-string-output-visitor qmp-output-visitor: Favor new visit_free() function string-output-visitor: Favor new visit_free() function qmp-input-visitor: Favor new visit_free() function string-input-visitor: Favor new visit_free() function opts-visitor: Favor new visit_free() function qapi: Add new visit_free() function qapi: Add parameter to visit_end_* qemu-img: Don't leak errors when outputting JSON qapi: Improve use of qmp/types.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-06qapi: Add new visit_complete() functionEric Blake1-15/+15
Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06qmp-output-visitor: Favor new visit_free() functionEric Blake1-3/+3
Now that we have a polymorphic visit_free(), we no longer need qmp_output_visitor_cleanup(); however, we still need to expose the subtype for qmp_output_get_qobject(). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-10-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06qemu-img: Don't leak errors when outputting JSONEric Blake1-6/+4
If our JSON output ever encounters an error, we would just silently leak the error object. Instead, assert that our usage won't fail. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-3-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-05block: Convert bdrv_pwrite_zeroes() to BdrvChildKevin Wolf1-1/+1
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Switch discard length bounds to byte-basedEric Blake1-1/+2
Sector-based limits are awkward to think about; in our on-going quest to move to byte-based interfaces, convert max_discard and discard_alignment. Rename them, using 'pdiscard' as an aid to track which remaining discard interfaces need conversion, and so that the compiler will help us catch the change in semantics across any rebased code. The BlockLimits type is now completely byte-based; and in iscsi.c, sector_limits_lun2qemu() is no longer needed. pdiscard_alignment is made unsigned (we use power-of-2 alignments as bitmasks, where unsigned is easier to think about) while leaving max_pdiscard signed (since we still have an 'int' interface); this is comparable to what commit cf081fc did for write zeroes limits. We may later want to make everything an unsigned 64-bit limit - but that requires a bigger code audit. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-05block: Switch transfer length bounds to byte-basedEric Blake1-4/+4
Sector-based limits are awkward to think about; in our on-going quest to move to byte-based interfaces, convert max_transfer_length and opt_transfer_length. Rename them (dropping the _length suffix) so that the compiler will help us catch the change in semantics across any rebased code, and improve the documentation. Use unsigned values, so that we don't have to worry about negative values and so that bit-twiddling is easier; however, we are still constrained by 2^31 of signed int in most APIs. When a value comes from an external source (iscsi and raw-posix), sanitize the results to ensure that opt_transfer is a power of 2. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-05qemu-img: fix failed autotestsDenis V. Lunev1-1/+1
There are 9 iotests failed on Ubuntu 15.10 at the moment. The problem is that options parsing in qemu-img is broken by the following commit: commit 10985131e337a0c52c5bd1e191fd7867a6ff8d02 Author: Denis V. Lunev <den@openvz.org> Date: Fri Jun 17 17:44:13 2016 +0300 qemu-img: move common options parsing before commands processing This strange command line reports error ./qemu-img create -f qcow2 TEST_DIR/t.qcow2 -- 1024 qemu-img: Invalid image size specified! while original code parses it successfully. The problem is that getopt_long state should be reset. This could be done using this assignment according to the manual: optind = 0 Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Eric Blake <eblake@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-06-28trace: enable tracing in qemu-imgDenis V. Lunev1-1/+18
The command will work this way: qemu-img --trace "qcow2*" create -f qcow2 1.img 64G [Quote "qcow2*" to protect against shell globbing as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1466174654-30130-8-git-send-email-den@openvz.org Suggested by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-28qemu-img: move common options parsing before commands processingDenis V. Lunev1-13/+26
This is necessary to enable creation of common qemu-img options which will be specified before command. The patch also enables '-V' alias to '--version' (exactly like in other block utilities) and documents this change. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1466174654-30130-7-git-send-email-den@openvz.org CC: Paolo Bonzini <pbonzini@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-16qemu-img bench: Fix uninitialised writethrough modeKevin Wolf1-1/+1
If no -t option is specified, bool writethrough stayed uninitialised. Initialise it as false, which makes cache=writeback the default cache mode. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-08Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell1-0/+329
Block layer patches # gpg: Signature made Wed 08 Jun 2016 09:31:38 BST # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: (31 commits) qemu-img bench: Add --flush-interval qemu-img bench: Implement -S (step size) qemu-img bench: Make start offset configurable qemu-img bench: Sequential writes qemu-img bench block: Don't emulate natively supported pwritev flags blockdev: clean up error handling in do_open_tray block: Fix bdrv_all_delete_snapshot() error handling qcow2: avoid extra flushes in qcow2 raw-posix: Fetch max sectors for host block device block: assert that bs->request_alignment is a power of 2 migration/block: Convert saving to BlockBackend migration/block: Convert load to BlockBackend block: Kill bdrv_co_write_zeroes() vmdk: Convert to bdrv_co_pwrite_zeroes() raw_bsd: Convert to bdrv_co_pwrite_zeroes() raw-posix: Convert to bdrv_co_pwrite_zeroes() qed: Convert to bdrv_co_pwrite_zeroes() gluster: Convert to bdrv_co_pwrite_zeroes() blkreplay: Convert to bdrv_co_pwrite_zeroes() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-08qemu-img bench: Add --flush-intervalKevin Wolf1-9/+86
This options allows to flush the image periodically during write tests. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-08qemu-img bench: Implement -S (step size)Kevin Wolf1-4/+21
With this new option, qemu-img bench can be told to advance the current offset after each request by a different value than the buffer size. This is useful for controlling the conditions for cluster allocation in image formats (e.g. qcow2 cluster allocation with COW in front of the request, or COW areas that aren't overwritten immediately). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-08qemu-img bench: Make start offset configurableKevin Wolf1-3/+20
This patch adds an option the specify the offset of the first request made by qemu-img bench. This allows to benchmark misaligned requests. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-08qemu-img bench: Sequential writesKevin Wolf1-5/+33
This extends qemu-img bench with an option that makes it use sequential writes instead of reads for the test run. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-08qemu-img benchKevin Wolf1-0/+190
This adds a qemu-img command that allows doing some simple benchmarks for the block layer without involving guest devices and a real VM. For the start, this implements only a test of sequential reads. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-07Makefile: Derive "PKGVERSION" from "git describe" by defaultFam Zheng1-0/+1
Currently, if not specified in "./configure", QEMU_PKGVERSION will be empty. Write a rule in Makefile to generate a value from "git describe" combined with a possible git tree cleanness suffix, and write into a new header. $ cat qemu-version.h #define QEMU_PKGVERSION "-v2.6.0-557-gd6550e9-dirty" Include the header in .c files where the macro is referenced. It's not necessary to include it in all files, otherwise each time the content of the file changes, all sources have to be recompiled. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <1464774261-648-3-git-send-email-famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-25blockjob: Remove BlockJob.bsKevin Wolf1-1/+1
There is a single remaining user in qemu-img, and another one in a test case, both of which can be trivially converted to using BlockJob.blk instead. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-05-25block: Rename blk_write_zeroes()Eric Blake1-2/+2
Commit 983a1600 changed the semantics of blk_write_zeroes() to be byte-based rather than sector-based, but did not change the name, which is an open invitation for other code to misuse the function. Renaming to pwrite_zeroes() makes it more in line with other byte-based interfaces, and will help make it easier to track which remaining write_zeroes interfaces still need conversion. Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-05-20Use &error_fatal when initializing crypto on qemu-{img,io,nbd}Eduardo Habkost1-4/+1
In addition to making the code simpler, this will replace the long error messages: cannot initialize crypto: Unable to initialize GNUTLS library: [...] cannot initialize crypto: Unable to initialize gcrypt with shorter messages: Unable to initialize GNUTLS library: [...] Unable to initialize gcrypt Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-05-12qemu-img: check block status of backing file when converting.Ren Kimura1-2/+13
When converting images, check the block status of its backing file chain to avoid needlessly reading zeros. Signed-off-by: Ren Kimura <rkx1209dev@gmail.com> Message-id: 1461773098-20356-1-git-send-email-rkx1209dev@gmail.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-05-12qemu-img: Switch to byte-based block accessEric Blake1-9/+19
Sector-based blk_write() should die; switch to byte-based blk_pwrite() instead. Likewise for blk_read(). Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-12block: Switch blk_*write_zeroes() to byte interfaceEric Blake1-1/+2
Sector-based blk_write() should die; convert the one-off variant blk_write_zeroes() to use an offset/count interface instead. Likewise for blk_co_write_zeroes() and blk_aio_write_zeroes(). Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-28qom: -object error messages lost location, restore itMarkus Armbruster1-28/+11
qemu_opts_foreach() runs its callback with the error location set to the option's location. Any errors the callback reports use the option's location automatically. Commit 90998d5 moved the actual error reporting from "inside" qemu_opts_foreach() to after it. Here's a typical hunk: if (qemu_opts_foreach(qemu_find_opts("object"), - object_create, - object_create_initial, NULL)) { + user_creatable_add_opts_foreach, + object_create_initial, &err)) { + error_report_err(err); exit(1); } Before, object_create() reports from within qemu_opts_foreach(), using the option's location. Afterwards, we do it after qemu_opts_foreach(), using whatever location happens to be current there. Commonly a "none" location. This is because Error objects don't have location information. Problematic. Reproducer: $ qemu-system-x86_64 -nodefaults -display none -object secret,id=foo,foo=bar qemu-system-x86_64: Property '.foo' not found Note no location. This commit restores it: qemu-system-x86_64: -object secret,id=foo,foo=bar: Property '.foo' not found Note that the qemu_opts_foreach() bug just fixed could mask the bug here: if the location it leaves dangling hasn't been clobbered, yet, it's the correct one. Reported-by: Eric Blake <eblake@redhat.com> Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1461767349-15329-4-git-send-email-armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Paragraph on Error added to commit message]
2016-04-12block: initialize qcrypto API at startupDaniel P. Berrange1-0/+6
Any programs which call the qcrypto APIs should ensure that qcrypto_init() has been called before anything else which can use crypto. Essentially this means right at the start of the main method before initializing anything else. This is important because some versions of gnutls/gcrypt require explicit initialization before use. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Alex Bligh <alex@alex.org.uk> Tested-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-12qemu-img: fix formatting of error messageDaniel P. Berrange1-1/+1
The error_reportf_err() will not automatically append a ': ' before adding its suffix, so we must include that in the message we pass it, otherwise we get a badly formatted message lacking whitespace: qemu-img: Could not open 'driver=nbd,host=127.0.0.1,port=6666,tls-creds=tls0'Failed to connect socket: Connection refused Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30qemu-img: Fix preallocation with -S 0 for convertMax Reitz1-11/+15
When passing -S 0 to qemu-img convert, the target image is supposed to be fully allocated. Right now, this is not the case if the source image contains areas which bdrv_get_block_status() reports as being zero. This patch changes a zeroed area's status from BLK_ZERO to BLK_DATA before invoking convert_write() if -S 0 has been specified. In addition, the check whether convert_read() actually needs to do anything (basically only if the current area is a BLK_DATA area) is pulled out of that function to the caller. If -S 0 has been specified, zeroed areas need to be written as data to the output, thus they then have to be accounted when calculating the progress made. This patch changes the reference output for iotest 122; contrary to what it assumed, -S 0 really should allocate everything in the output, not just areas that are filled with zeros (as opposed to being zeroed). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block: Remove BDRV_O_CACHE_WBKevin Wolf1-1/+1
The previous patches have successively made blk->enable_write_cache the true source for the information whether a writethrough mode must be implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage we're carrying around, so now's the time to remove it. At the same time, we remove the 'cache.writeback' option parsing on the BDS level as the only effect was setting the BDRV_O_CACHE_WB flag. This change requires test cases that explicitly enabled the option to drop it. Other than that and the change of the error message when writethrough is enabled on the BDS level (from "Can't set writethrough mode" to "doesn't support the option"), there should be no change in behaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30qemu-img: Call blk_set_enable_write_cache() explicitlyKevin Wolf1-32/+44
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30qemu-img: Expand all BDRV_O_FLAGS usesKevin Wolf1-12/+11
It always only set the BDRV_O_CACHE_WB flag, which is going to go away. In order to make the next changes more local for better reviewability this patches expands the macro. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30qemu-img/qemu-io: don't prompt for passwords if not requiredDaniel P. Berrange1-1/+2
The qemu-img/qemu-io tools prompt for disk encryption passwords regardless of whether any are actually required. Adding a check on bdrv_key_required() avoids this prompt for disk formats which have been converted to the QCryptoSecret APIs. This is just a temporary hack to ensure the block I/O tests continue to work after each patch, since the last patch will completely delete all the password prompting code. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.1 at 2024-12-30 20:01:02 +0000