aboutsummaryrefslogtreecommitdiff
path: root/qemu-char.c
AgeCommit message (Collapse)AuthorFilesLines
2013-08-26Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori1-1/+1
# By Alex Bligh (32) and others # Via Stefan Hajnoczi * stefanha/block: (42 commits) win32-aio: drop win32_aio_flush_cb() aio-win32: replace incorrect AioHandler->opaque usage with ->e aio / timers: remove dummy_io_handler_flush from tests/test-aio.c aio / timers: Remove legacy interface aio / timers: Switch entire codebase to the new timer API aio / timers: Add scripts/switch-timer-api aio / timers: Add test harness for AioContext timers aio / timers: convert block_job_sleep_ns and co_sleep_ns to new API aio / timers: Convert rtc_clock to be a QEMUClockType aio / timers: Remove main_loop_timerlist aio / timers: Rearrange timer.h & make legacy functions call non-legacy aio / timers: Add qemu_clock_get_ms and qemu_clock_get_ms aio / timers: Remove legacy qemu_clock_deadline & qemu_timerlist_deadline aio / timers: Remove alarm timers aio / timers: Add documentation and new format calls aio / timers: Use all timerlists in icount warp calculations aio / timers: Introduce new API timer_new and friends aio / timers: On timer modification, qemu_notify or aio_notify aio / timers: Convert mainloop to use timeout aio / timers: Convert aio_poll to use AioContext timers' deadline ... Message-id: 1377202298-22896-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-08-22aio / timers: Switch entire codebase to the new timer APIAlex Bligh1-1/+1
This is an autogenerated patch using scripts/switch-timer-api. Switch the entire code base to using the new timer API. Note this patch may introduce some line length issues. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-20Convert stderr message calling error_get_pretty() to error_report()Seiji Aguchi1-1/+1
Convert stderr messages calling error_get_pretty() to error_report(). Timestamp is prepended by -msg timstamp option with it. Per Markus's comment below, A conversion from fprintf() to error_report() is always an improvement, regardless of error_get_pretty(). http://marc.info/?l=qemu-devel&m=137513283408601&w=2 But, it is not reasonable to convert them at one time because fprintf() is used everwhere in qemu. So, it should be done step by step with avoiding regression. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-08-13qemu-char: fix infinite recursion connecting to monitor ptyJames Hogan1-1/+1
Since commit bd5c51e (qemu-char: don't issue CHR_EVENT_OPEN in a BH), an infinite recursion occurs when putting the monitor on a pty (-monitor pty) and connecting a terminal to the slave port. This is because of the qemu_chr_be_event(s, CHR_EVENT_OPENED) added to qemu_chr_be_generic_open(). This event is captured by monitor_event() which prints a welcome message to the character device. The flush of that welcome message retriggers another open event in pty_chr_state() because it checks s->connected, but only sets it to 1 after calling qemu_chr_be_generic_open(). I've fixed this by setting s->connected = 1 before the call to qemu_chr_be_generic_open() instead of after, so that the recursive pty_chr_state() doesn't call it again. An example snippet of repeating backtrace: ... #107486 0x007aec58 in monitor_flush (mon=0xf418b0) at qemu/monitor.c:288 #107487 0x007aee7c in monitor_puts (mon=0xf418b0, str=0x1176d07 "") at qemu/monitor.c:322 #107488 0x007aef20 in monitor_vprintf (mon=0xf418b0, fmt=0x8d4820 "QEMU %s monitor - type 'help' for more information\n", ap=0x7f432be0) at qemu/monitor.c:339 #107489 0x007aefac in monitor_printf (mon=0xf418b0, fmt=0x8d4820 "QEMU %s monitor - type 'help' for more information\n") at qemu/monitor.c:347 #107490 0x007ba4bc in monitor_event (opaque=0xf418b0, event=2) at qemu/monitor.c:4699 #107491 0x00684c28 in qemu_chr_be_event (s=0xf37788, event=2) at qemu/qemu-char.c:108 #107492 0x00684c70 in qemu_chr_be_generic_open (s=0xf37788) at qemu/qemu-char.c:113 #107493 0x006880a4 in pty_chr_state (chr=0xf37788, connected=1) at qemu/qemu-char.c:1145 #107494 0x00687fa4 in pty_chr_update_read_handler (chr=0xf37788) at qemu/qemu-char.c:1121 #107495 0x00687c9c in pty_chr_write (chr=0xf37788, buf=0x70b3c008 <Address 0x70b3c008 out of bounds>, len=538720) at qemu/qemu-char.c:1063 #107496 0x00684cc4 in qemu_chr_fe_write (s=0xf37788, buf=0x70b3c008 <Address 0x70b3c008 out of bounds>, len=538720) at qemu/qemu-char.c:118 ... Signed-off-by: James Hogan <james.hogan@imgtec.com> Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Message-id: 1375960178-10882-1-git-send-email-james.hogan@imgtec.com Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-30chardev: fix CHR_EVENT_OPENED events for mux chardevsMichael Roth1-0/+50
As of bd5c51ee6c4f1c79cae5ad2516d711a27b4ea8ec, chardevs no longer use bottom-halves to issue CHR_EVENT_OPENED events. To maintain past semantics, we instead defer the CHR_EVENT_OPENED events toward the end of chardev initialization. For muxes, this isn't good enough, since a range of FEs must be able to attach to the mux prior to any CHR_EVENT_OPENED being issued, else each FE will immediately print it's initial output (prompts, banners, etc.) just prior to us switching to the next FE as part of initialization. The is new and confusing behavior for users, as they'll see output for things like the HMP monitor, even though their the current mux focus may be a guest serial port with potentially no output. We fix this by further deferring CHR_EVENT_OPENED events for FEs associated with muxes until after machine init by flagging mux chardevs with 'explicit_be_open', which suppresses emission of CHR_EVENT_OPENED events until we explicitly set the mux as opened later. Currently, we must defer till after machine init since we potentially associate FEs with muxes as part of realize (for instance, serial_isa_realizefn). Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Message-id: 1375207462-8141-1-git-send-email-mdroth@linux.vnet.ibm.com Cc: qemu-stable@nongnu.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29qapi: Rename ChardevBackend member "memory" to "ringbuf"Markus Armbruster1-5/+6
Commit 1da48c6 called the new member "memory" after commit 3949e59 standardized "ringbuf". Rename for consistency. However, member name "memory" is visible in QMP since 1.5. It's undocumented just like the driver name. Keep it working anyway. Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1374849874-25531-4-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29qemu-char: Register ring buffer driver with correct name "ringbuf"Markus Armbruster1-1/+4
The driver is new in 1.4, with the documented name "ringbuf". However, it's actual name is the completely undocumented "memory". Screwed up in commit 3949e59. Fix code to match documentation. Keep the undocumented name working as an alias for compatibility. Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1374849874-25531-3-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29Revert "chardev: Make the name of memory device consistent"Markus Armbruster1-8/+8
This reverts commit 6a85e60cb994bd95d1537aafbff65816f3de4637. Commit 51767e7 "qemu-char: Add new char backend CirMemCharDriver" introduced a memory ring buffer character device driver named "memory". Commit 3949e59 "qemu-char: Saner naming of memchar stuff & doc fixes" changed the driver name to "ringbuf", along with a whole bunch of other names, with the following rationale: Naming is a mess. The code calls the device driver CirMemCharDriver, the public API calls it "memory", "memchardev", or "memchar", and the special commands are named like "memchar-FOO". "memory" is a particularly unfortunate choice, because there's another character device driver called MemoryDriver. Moreover, the device's distinctive property is that it's a ring buffer, not that's in memory. This is what we released in 1.4.0. Unfortunately, the rename missed a critical instance of "memory": the actual driver name. Thus, the new device could be used only by an entirely undocumented name. The documented name did not work. Bummer. Commit 6a85e60 fixes this by changing the documentation to match the code. It also changes some, but not all related occurences of "ringbuf" to "memory". Left alone are identifiers in C code, HMP and QMP commands. The latter are external interface, so they can't be changed. The result is an inconsistent mess. Moreover, "memory" is a rotten name. The device's distinctive property is that it's a ring buffer, not that's in memory. User's don't care whether it's in RAM, flash, or carved into chocolate tablets by Oompa Loompas. Revert the commit. Next commit will fix just the bug. Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1374849874-25531-2-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-18char: io_channel_send: don't lose written bytesLaszlo Ersek1-22/+19
The g_io_channel_write_chars() documentation states, bytes_written: The number of bytes written. This can be nonzero even if the return value is not G_IO_STATUS_NORMAL. [...] io_channel_send() could lose such bytes before. Furthermore, the (status == G_IO_STATUS_EOF) condition used to evaluate to constant false whenever it was reached. When that condition actually held, it always led to -1 / EINVAL. This patch (almost) distinguishes G_IO_STATUS_EOF only when no bytes have been written, and then treats it as an error. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1373998781-29561-2-git-send-email-lersek@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-10qemu-char: Fix ringbuf option sizeMarkus Armbruster1-1/+1
Any attempt to use it trips an "opt->desc->type == QEMU_OPT_NUMBER" assertion. Broken in commit 1da48c65. Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-07-09trap signals for "-serial mon:stdio"Paolo Bonzini1-4/+9
With mon:stdio you can exit the VM by switching to the monitor and sending the "quit" command. It is then useful to pass Ctrl-C to the VM instead of exiting. This in turn lets us stop tying the default signal handling behavior to -nographic, removing gratuitous differences between "-display none" and "-nographic". This patch changes behavior for "-display none -serial mon:stdio", as expected, but not for "-display none -serial stdio". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1372868986-25988-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-28Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori1-13/+32
# By Gerd Hoffmann (13) and Michael Tokarev (1) # Via Michael Tokarev * mjt/trivial-patches: doc: we use seabios, not bochs bios qemu-socket: don't leak opts on error qemu-char: report udp backend errors qemu-char: add -chardev mux support qemu-char: minor mux chardev fixes qemu-char: use ChardevBackendKind in CharDriver qemu-char: don't leak opts on error qemu-char: fix documentation for telnet+wait socket flags qemu-char: print notification to stderr qemu-char: use more specific error_setg_* variants qemu-char: check optional fields using has_* qemu-socket: catch monitor_get_fd failures qemu-socket: drop pointless allocation qemu-socket: zero-initialize SocketAddress Message-id: 1372443465-22384-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-28qemu-char: Fix ID reuse after chardev-remove for qapi-based initMarkus Armbruster1-0/+1
Commit 2c5f488 introduced qapi-based character device initialization as a new code path in qemu_chr_new_from_opts(). Unfortunately, it failed to store parameter opts in the new chardev. Therefore, qemu_chr_delete() doesn't delete it. Even though the device is gone, its options linger, and any attempt to create another one with the same ID fails. Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1372339512-28149-1-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-28qemu-char: report udp backend errorsGerd Hoffmann1-0/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-28qemu-char: add -chardev mux supportGerd Hoffmann1-0/+18
Allow to explicitly create mux chardevs on the command line, like you can using QMP. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-28qemu-char: minor mux chardev fixesGerd Hoffmann1-4/+3
mux failure path has a memory leak. creating a mux chardev can't fail though, so just assert() that instead of fixing an error path which never ever runs anyway ... Also fix bid being leaked while being at it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-28qemu-char: use ChardevBackendKind in CharDriverGerd Hoffmann1-2/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-28qemu-char: don't leak opts on errorGerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-28qemu-char: print notification to stderrGerd Hoffmann1-2/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-28qemu-char: use more specific error_setg_* variantsGerd Hoffmann1-2/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-28qemu-char: check optional fields using has_*Gerd Hoffmann1-2/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-21qemu-char: use bool in qemu_chr_open_socket and simplify code a bitliguang1-13/+6
Local variables is_* should be bool by usage. While at it, simplify the logic/code a bit. Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-14create qemu_openpty_raw() helper function and move it to a separate fileMichael Tokarev1-72/+5
In two places qemu uses openpty() which is very system-dependent, and in both places the pty is switched to raw mode as well. Make a wrapper function which does both steps, and move all the system-dependent complexity into a separate file, together with static/local implementations of openpty() and cfmakeraw() from qemu-char.c. It is in a separate file, not part of oslib-posix.c, because openpty() often resides in -lutil which is not linked to every program qemu builds. This change removes #including of <pty.h>, <termios.h> and other rather specific system headers out of qemu-common.h, which isn't a place for such specific headers really. This version has been verified to build correctly on Linux, OpenBSD, FreeBSD and OpenIndiana. On the latter it lets qemu to be built with gtk gui which were not possible there due to missing openpty() and cfmakeraw(). Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Tested-by: Andreas Färber <andreas.faerber@web.de>
2013-06-11qemu-char: remove a few needless #includesMichael Tokarev1-2/+0
This removes <syslog.h> since we don't use syslogging, and removes second, solaris-specific, include of <net/if.h> (which is included in a common part of the file) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-10qemu-char: don't issue CHR_EVENT_OPEN in a BHMichael Roth1-21/+17
When CHR_EVENT_OPENED was initially added, it was CHR_EVENT_RESET, and it was issued as a bottom-half: 86e94dea5b740dad65446c857f6959eae43e0ba6 Which we basically used to print out a greeting/prompt for the monitor. AFAICT the only reason this was ever done in a BH was because in some cases we'd modify the chr_write handler for a new chardev backend *after* the site where we issued the reset (see: 86e94d:qemu_chr_open_stdio()) At some point this event was renamed to CHR_EVENT_OPENED, and we've maintained the use of this BH ever since. However, due to 9f939df955a4152aad69a19a77e0898631bb2c18, we schedule the BH via g_idle_add(), which is causing events to sometimes be delivered after we've already begun processing data from backends, leading to: known bugs: QMP: session negotation resets with OPENED event, in some cases this is causing new sessions to get sporadically reset potential bugs: hw/usb/redirect.c: can_read handler checks for dev->parser != NULL, which may be true if CLOSED BH has not been executed yet. In the past, OPENED quiesced outstanding CLOSED events prior to us reading client data. If it's delayed, our check may allow reads to occur even though we haven't processed the OPENED event yet, and when we do finally get the OPENED event, our state may get reset. qtest.c: can begin session before OPENED event is processed, leading to a spurious reset of the system and irq_levels gdbstub.c: may start a gdb session prior to the machine being paused To fix these, let's just drop the BH. Since the initial reasoning for using it still applies to an extent, work around that by deferring the delivery of CHR_EVENT_OPENED until after the chardevs have been fully initialized, toward the end of qmp_chardev_add() (or some cases, qemu_chr_new_from_opts()). This defers delivery long enough that we can be assured a CharDriverState is fully initialized before CHR_EVENT_OPENED is sent. Also, rather than requiring each chardev to do an explicit open, do it automatically, and allow the small few who don't desire such behavior to suppress the OPENED-on-init behavior by setting a 'explicit_be_open' flag. We additionally add missing OPENED events for stdio backends on w32, which were previously not being issued, causing us to not recieve the banner and initial prompts for qmp/hmp. Reported-by: Stefan Priebe <s.priebe@profihost.ag> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Message-id: 1370636393-21044-1-git-send-email-mdroth@linux.vnet.ibm.com Cc: qemu-stable@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-27chardev: fix "info chardev" outputGerd Hoffmann1-0/+3
Fill unset CharDriverState->filename with the backend name, so 'info chardev' will return at least the chardev type. Don't touch it in case the chardev init function filled it already, like the socket+pty chardevs do for example. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-27Revert "chardev: Get filename for new qapi backend"Gerd Hoffmann1-2/+0
Does not handle chardevs created via chardev-add monitor command. This reverts commit 2b220025993e76d4116781ca91a4fabc5ad9c722. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-22chardev: Get filename for new qapi backendLei Li1-0/+2
This patch sets the filename when the new qapi backend init from opts. The previous patch and discussions as link below: http://patchwork.ozlabs.org/patch/243896/ If anyone who have better idea to fix this please let me know your suggestions. Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Message-id: 1369132079-11377-3-git-send-email-lilei@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-22chardev: Make the name of memory device consistentLei Li1-8/+8
Now we have memory char device, but the backend name of it is a little confusion. We actually register it by 'memory', but the description in qemu-option, the name of open functions and the new api backend called it 'ringbuf'. It should keep consistent. This patch named it all to 'memory'. Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1369132079-11377-2-git-send-email-lilei@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-22glib: Fix some misuses of gsize/size_t typesPeter Crosthwaite1-1/+1
This unbreaks cross compile builds: configure --target-list="i386-softmmu" --cpu=i386 When building on a 64bit machine. Reported-by: David Holsgrove <david.holsgrove@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Message-id: 926326e96fd8685d74e9d5bf430fe4ad97a55289.1369191585.git.peter.crosthwaite@xilinx.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-20chardev: Make consistent with udp device for new qapi backendLei Li1-5/+5
When register and open a chardev udp, the backend name should be udp not dgram, and we do not have backend dgram in the chardev list. This patch makes the new qapi udp backend consistent with the original udp device. Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Message-id: 1369032665-18159-2-git-send-email-lilei@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-14portability: pty.h is glibc-specificPaolo Bonzini1-10/+0
This should fix building the GTK+ front-end on BSDs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1368533121-30796-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-25qemu-char: Set foo_tag = 0 when returning FALSE from callbacksHans de Goede1-0/+2
While reviewing some patches I found this problem where tcp_chr_accept does not clear listen_tag when returning FALSE, leading to a double g_source_remove of the underlying source. Not really a problem unless the id gets re-used in between, but still something we should fix. While at it I've also reviewed all the other code in qemu-char.c for similar problems and found that pty_chr_timer has the same problem. Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Message-id: 1366890782-10311-1-git-send-email-hdegoede@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22qemu-char: do not operate on sources from finalize callbacksPaolo Bonzini1-15/+40
Due to a glib bug, the finalize callback is called with the GMainContext lock held. Thus, any operation on the context from the callback will cause recursive locking and a deadlock. This happens, for example, when a client disconnects from a socket chardev. The fix for this is somewhat ugly, because we need to forego polymorphism and implement our own function to destroy IOWatchPoll sources. The right thing to do here would be child sources, but we support older glib versions that do not have them. Not coincidentially, glib developers found and fixed the deadlock as part of implementing child sources. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Message-id: 1366385529-10329-5-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22qemu-char: correct return value from chr_read functionsPaolo Bonzini1-6/+16
Even if a CharDriverState's source is blocked by the front-end, it must not be dropped. The IOWatchPoll that wraps it will take care of adding and removing it to the main loop. Only remove the source when the channel is closed; and in that case, make sure that the wrapping IOWatchPoll is removed too. These should just be theoretical bugs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366385529-10329-4-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22qemu-char: simplify pty pollingPaolo Bonzini1-24/+17
There is no need to use a timer and pty_chr_read to detect a connected pty. It is simpler to just call g_poll periodically and check for POLLHUP. It is done once per second, and only if the pty is disconnected, so it is cheap enough. Tested with "-monitor pty" and "-serial mon:pty", both of which work correctly and do not freeze QEMU. (How to test ptys? "socat -,raw,echo=0 /dev/pts/4,raw"). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366385529-10329-3-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22qemu-char: use consistent idiom for removing sourcesPaolo Bonzini1-9/+23
Always check that the source is active, and zero the tag afterwards. The occurrence in pty_chr_state will trigger with the next patch, the others are just theoretical. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366385529-10329-2-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-15Merge remote-tracking branch 'bonzini/hw-dirs' into stagingAnthony Liguori1-1/+1
* bonzini/hw-dirs: exec: remove useless declarations from memory-internal.h memory: move core typedefs to qemu/typedefs.h include: avoid useless includes of exec/ headers sysemu: avoid proliferation of include/ subdirectories tpm: reorganize headers and split hardware part configure: fix TPM logic acpi.h: make it self contained acpi: move declarations from pc.h to acpi.h hw: Add lost ARM core again Fix failure to create q35 machine Add linux-headers to QEMU_INCLUDES arm: fix location of some include files Conflicts: configure aliguori: trivial conflict in configure output Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-15sysemu: avoid proliferation of include/ subdirectoriesPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15qemu-char: another io_add_watch_poll fixPaolo Bonzini1-1/+4
After attaching the source, we have to remove the reference we hold to it, because we do not hold anymore a pointer to the source. If we do not do this, removing the source will not finalize it and will not drop the "real" I/O watch source. This showed up when backporting the new flow control patches to older versions of QEMU that still used select. The whole select then failed with EBADF (poll instead will reporting POLLNVAL on a single pollfd) and QEMU froze. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1365600207-21685-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-08qemu-char: really fix behavior on can_read = 0Paolo Bonzini1-4/+13
I misread the glib manual, g_source_remove does not let you re-attach the source later. This behavior (called "blocking" the source in glib) is present in glib's source code, but private and not available outside glib; hence, we have to resort to re-creating the source every time. In fact, g_source_remove and g_source_destroy are the same thing, except g_source_destroy is O(1) while g_source_remove scans a potentially very long list of GSources in the current main loop. Ugh. Better use g_source_destroy explicitly, and leave "tags" to those dummies who cannot track their pointers' lifetimes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1365426195-12596-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-05qemu-char: eliminate busy waiting on can_read returning zeroPaolo Bonzini1-43/+19
The character backend refactoring introduced an undesirable busy wait. The busy wait happens if can_read returns zero and there is data available on the character device's file descriptor. Then, the I/O watch will fire continuously and, with TCG, the CPU thread will never run. 1) Char backend asks front end if it can write 2) Front end says no 3) poll() finds the char backend's descriptor is available 4) Goto (1) What we really want is this (note that step 3 avoids the busy wait): 1) Char backend asks front end if it can write 2) Front end says no 3) poll() goes on without char backend's descriptor 4) Goto (1) until qemu_chr_accept_input() called 5) Char backend asks front end if it can write 6) Front end says yes 7) poll() finds the char backend's descriptor is available 8) Backend handler called After this patch, the IOWatchPoll source and the watch source are separated. The IOWatchPoll is simply a hook that runs during the prepare phase on each main loop iteration. The hook adds/removes the actual source depending on the return value from can_read. A simple reproducer is qemu-system-i386 -serial mon:stdio ... followed by banging on the terminal as much as you can. :) Without this patch, emulation will hang. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1365177573-11817-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-05chardev: drop the Memory chardev driverLuiz Capitulino1-64/+0
It's not used anymore since the last commit. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-04qemu-char: Call fe_claim / fe_release when not using qdev chr propertiesHans de Goede1-1/+9
chardev-frontends need to explictly check, increase and decrement the avail_connections "property" of the chardev when they are not using a qdev-chardev-property for the chardev. This fixes things like: qemu-kvm -chardev stdio,id=foo -device isa-serial,chardev=foo \ -mon chardev=foo Working, where they should fail. Most of the changes here are due to old hardware emulation code which is using serial_hds directly rather then a qdev-chardev-property. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Message-id: 1364412581-3672-3-git-send-email-hdegoede@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-04qemu-char: Add qemu_chr_fe_claim / _release helper functionsHans de Goede1-0/+23
Add qemu_chr_fe_claim / _release helper functions for properly dealing with avail_connections. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Message-id: 1364412581-3672-2-git-send-email-hdegoede@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-02Merge remote-tracking branch 'luiz/queue/qmp' into stagingAnthony Liguori1-4/+7
# By Stefan Hajnoczi # Via Luiz Capitulino * luiz/queue/qmp: chardev: clear O_NONBLOCK on SCM_RIGHTS file descriptors qemu-socket: set passed fd non-blocking in socket_connect() net: ensure "socket" backend uses non-blocking fds oslib-posix: rename socket_set_nonblock() to qemu_set_nonblock()
2013-04-02chardev: clear O_NONBLOCK on SCM_RIGHTS file descriptorsStefan Hajnoczi1-0/+3
When we receive a file descriptor over a UNIX domain socket the O_NONBLOCK flag is preserved. Clear the O_NONBLOCK flag and rely on QEMU file descriptor users like migration, SPICE, VNC, block layer, and others to set non-blocking only when necessary. This change ensures we don't accidentally expose O_NONBLOCK in the QMP API. QMP clients should not need to get the non-blocking state "correct". A recent real-world example was when libvirt passed a non-blocking TCP socket for migration where we expected a blocking socket. The source QEMU produced a corrupted migration stream since its code did not cope with non-blocking sockets. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-04-02oslib-posix: rename socket_set_nonblock() to qemu_set_nonblock()Stefan Hajnoczi1-4/+4
The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets. Rename to qemu_set_nonblock() just like qemu_set_cloexec(). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-04-02qemu-char: rewrite io_channel_send_all and drop the '_all' suffixAnthony Liguori1-16/+20
The current code is oddly written and have equally odd semantics. Despite the '_all' suffix, upon EAGAIN the result will be a partial write but instead of returning the partial write, we return EAGAIN. Change the behavior to write as much as we can until we get an EAGAIN returning a partial write if we do. Reported-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1364575190-731-1-git-send-email-aliguori@us.ibm.com
2013-03-27qemu-char: add_handlers: Don't re-send the be_open event on unregisterHans de Goede1-1/+1
Resending the be_open event only is useful when a frontend is registering, not when it is unregistering. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Message-id: 1364292483-16564-9-git-send-email-hdegoede@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2024-12-28 19:03:49 +0000