aboutsummaryrefslogtreecommitdiff
path: root/qemu-char.c
AgeCommit message (Collapse)AuthorFilesLines
2014-02-17qmp: expose list of supported character device backendsMartin Kletzander1-0/+19
Introduce 'query-chardev-backends' QMP command which lists all supported character device backends. Signed-off-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-17Use error_is_set() only when necessaryMarkus Armbruster1-3/+3
error_is_set(&var) is the same as var != NULL, but it takes whole-program analysis to figure that out. Unnecessarily hard for optimizers, static checkers, and human readers. Dumb it down to obvious. Gets rid of several dozen Coverity false positives. Note that the obvious form is already used in many places. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-12-23misc: Use macro ARRAY_SIZE where possibleStefan Weil1-2/+1
This improves readability and simplifies the code. Cc: Anthony Liguori <aliguori@amazon.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-16char: add qemu_chr_fe_event()Marc-André Lureau1-0/+7
Teach the chardev frontend to send event. This is used by the Spice port chardev currently. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-10-10Merge remote-tracking branch 'amit/char-remove-watch-on-unplug' into stagingAnthony Liguori1-51/+31
# By Amit Shah # Via Amit Shah * amit/char-remove-watch-on-unplug: char: remove watch callback on chardev detach from frontend char: use common function to disable callbacks on chardev close char: move backends' io watch tag to CharDriverState Message-id: 20131004154802.GA25646@grmbl.mre Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-10-09Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori1-2/+2
# By Stefan Weil (5) and others # Via Michael Tokarev * mjt/trivial-patches: migration: Fix compiler warning ('caps' may be used uninitialized) util/path: Fix type which is longer than 8 bit for MinGW hw/9pfs: Fix errno value for xattr functions vl: Clean up unnecessary boot_order complications qemu-char: Fix potential out of bounds access to local arrays pci-ohci: Add missing 'break' in ohci_service_td sh4: Fix serial line access for Linux kernels later than 3.2 hw/alpha: Fix compiler warning (integer constant is too large) target-i386: Fix compiler warning (integer constant is too large) block: Remove unused assignment (fixes warning from clang) exec: cleanup DEBUG_SUBPAGE tests: Fix schema parser test for in-tree build tests: Update .gitignore for test-int128 and test-bitops .gitignore: ignore tests/qemu-iotests/socket_scm_helper Message-id: 1381051979-25742-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-05qemu-char: Fix potential out of bounds access to local arraysStefan Weil1-2/+2
Latest gcc-4.8 supports a new option -fsanitize=address which activates an AddressSanitizer. This AddressSanitizer stops the QEMU system emulation very early because two character arrays of size 8 are potentially written with 9 bytes. Commit 6ea314d91439741e95772dfbab98b4135e04bebb added the code. There is no obvious reason why width or height could need 8 characters, so reduce it to 7 characters which together with the terminating '\0' fit into the arrays. Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Alex Bennée <alex@bennee.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-10-01chardev: handle qmp_chardev_add(KIND_MUX) failureGerd Hoffmann1-1/+6
Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-12chardev: fix pty_chr_timerGerd Hoffmann1-8/+4
pty_chr_timer first calls pty_chr_update_read_handler(), then clears timer_tag (because it is a one-shot timer). This is the wrong order though. pty_chr_update_read_handler might re-arm time timer, and the new timer_tag gets overwitten in that case. This leads to crashes when unplugging a pty chardev: pty_chr_close thinks no timer is running -> timer isn't canceled -> pty_chr_timer gets called with stale CharDevState -> BOOM. This patch fixes the ordering. Kill the pointless goto while being at it. https://bugzilla.redhat.com/show_bug.cgi?id=994414 Cc: qemu-stable@nongnu.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-05char: remove watch callback on chardev detach from frontendAmit Shah1-0/+3
If a frontend device releases the chardev (via unplug), the chr handlers are set to NULL via qdev's exit callbacks invoking qemu_chr_add_handlers(). If the chardev had a pending operation, a callback will be invoked, which will try to access data in the just-released frontend, causing a segfault. Ensure the callbacks are disabled when frontends release chardevs. This was seen when a virtio-serial port was unplugged when heavy guest->host IO was in progress (causing a callback to be registered). In the window in which the throttling was active, unplugging ports caused a qemu segfault. https://bugzilla.redhat.com/show_bug.cgi?id=985205 CC: <qemu-stable@nongnu.org> Reported-by: Sibiao Luo <sluo@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2013-09-05char: use common function to disable callbacks on chardev closeAmit Shah1-43/+19
This deduplicates code used a lot of times. CC: <qemu-stable@nongnu.org> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2013-09-05char: move backends' io watch tag to CharDriverStateAmit Shah1-38/+39
All the backends implement an io watcher tag for callbacks. Move it to CharDriverState from each backend's struct to make accessing the tag from backend-neutral functions easier. This will be used later to cancel a callback on chardev detach from a frontend. CC: <qemu-stable@nongnu.org> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2013-08-26Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori1-1/+1
# By Alex Bligh (32) and others # Via Stefan Hajnoczi * stefanha/block: (42 commits) win32-aio: drop win32_aio_flush_cb() aio-win32: replace incorrect AioHandler->opaque usage with ->e aio / timers: remove dummy_io_handler_flush from tests/test-aio.c aio / timers: Remove legacy interface aio / timers: Switch entire codebase to the new timer API aio / timers: Add scripts/switch-timer-api aio / timers: Add test harness for AioContext timers aio / timers: convert block_job_sleep_ns and co_sleep_ns to new API aio / timers: Convert rtc_clock to be a QEMUClockType aio / timers: Remove main_loop_timerlist aio / timers: Rearrange timer.h & make legacy functions call non-legacy aio / timers: Add qemu_clock_get_ms and qemu_clock_get_ms aio / timers: Remove legacy qemu_clock_deadline & qemu_timerlist_deadline aio / timers: Remove alarm timers aio / timers: Add documentation and new format calls aio / timers: Use all timerlists in icount warp calculations aio / timers: Introduce new API timer_new and friends aio / timers: On timer modification, qemu_notify or aio_notify aio / timers: Convert mainloop to use timeout aio / timers: Convert aio_poll to use AioContext timers' deadline ... Message-id: 1377202298-22896-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-08-22aio / timers: Switch entire codebase to the new timer APIAlex Bligh1-1/+1
This is an autogenerated patch using scripts/switch-timer-api. Switch the entire code base to using the new timer API. Note this patch may introduce some line length issues. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-20Convert stderr message calling error_get_pretty() to error_report()Seiji Aguchi1-1/+1
Convert stderr messages calling error_get_pretty() to error_report(). Timestamp is prepended by -msg timstamp option with it. Per Markus's comment below, A conversion from fprintf() to error_report() is always an improvement, regardless of error_get_pretty(). http://marc.info/?l=qemu-devel&m=137513283408601&w=2 But, it is not reasonable to convert them at one time because fprintf() is used everwhere in qemu. So, it should be done step by step with avoiding regression. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-08-13qemu-char: fix infinite recursion connecting to monitor ptyJames Hogan1-1/+1
Since commit bd5c51e (qemu-char: don't issue CHR_EVENT_OPEN in a BH), an infinite recursion occurs when putting the monitor on a pty (-monitor pty) and connecting a terminal to the slave port. This is because of the qemu_chr_be_event(s, CHR_EVENT_OPENED) added to qemu_chr_be_generic_open(). This event is captured by monitor_event() which prints a welcome message to the character device. The flush of that welcome message retriggers another open event in pty_chr_state() because it checks s->connected, but only sets it to 1 after calling qemu_chr_be_generic_open(). I've fixed this by setting s->connected = 1 before the call to qemu_chr_be_generic_open() instead of after, so that the recursive pty_chr_state() doesn't call it again. An example snippet of repeating backtrace: ... #107486 0x007aec58 in monitor_flush (mon=0xf418b0) at qemu/monitor.c:288 #107487 0x007aee7c in monitor_puts (mon=0xf418b0, str=0x1176d07 "") at qemu/monitor.c:322 #107488 0x007aef20 in monitor_vprintf (mon=0xf418b0, fmt=0x8d4820 "QEMU %s monitor - type 'help' for more information\n", ap=0x7f432be0) at qemu/monitor.c:339 #107489 0x007aefac in monitor_printf (mon=0xf418b0, fmt=0x8d4820 "QEMU %s monitor - type 'help' for more information\n") at qemu/monitor.c:347 #107490 0x007ba4bc in monitor_event (opaque=0xf418b0, event=2) at qemu/monitor.c:4699 #107491 0x00684c28 in qemu_chr_be_event (s=0xf37788, event=2) at qemu/qemu-char.c:108 #107492 0x00684c70 in qemu_chr_be_generic_open (s=0xf37788) at qemu/qemu-char.c:113 #107493 0x006880a4 in pty_chr_state (chr=0xf37788, connected=1) at qemu/qemu-char.c:1145 #107494 0x00687fa4 in pty_chr_update_read_handler (chr=0xf37788) at qemu/qemu-char.c:1121 #107495 0x00687c9c in pty_chr_write (chr=0xf37788, buf=0x70b3c008 <Address 0x70b3c008 out of bounds>, len=538720) at qemu/qemu-char.c:1063 #107496 0x00684cc4 in qemu_chr_fe_write (s=0xf37788, buf=0x70b3c008 <Address 0x70b3c008 out of bounds>, len=538720) at qemu/qemu-char.c:118 ... Signed-off-by: James Hogan <james.hogan@imgtec.com> Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Message-id: 1375960178-10882-1-git-send-email-james.hogan@imgtec.com Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-30chardev: fix CHR_EVENT_OPENED events for mux chardevsMichael Roth1-0/+50
As of bd5c51ee6c4f1c79cae5ad2516d711a27b4ea8ec, chardevs no longer use bottom-halves to issue CHR_EVENT_OPENED events. To maintain past semantics, we instead defer the CHR_EVENT_OPENED events toward the end of chardev initialization. For muxes, this isn't good enough, since a range of FEs must be able to attach to the mux prior to any CHR_EVENT_OPENED being issued, else each FE will immediately print it's initial output (prompts, banners, etc.) just prior to us switching to the next FE as part of initialization. The is new and confusing behavior for users, as they'll see output for things like the HMP monitor, even though their the current mux focus may be a guest serial port with potentially no output. We fix this by further deferring CHR_EVENT_OPENED events for FEs associated with muxes until after machine init by flagging mux chardevs with 'explicit_be_open', which suppresses emission of CHR_EVENT_OPENED events until we explicitly set the mux as opened later. Currently, we must defer till after machine init since we potentially associate FEs with muxes as part of realize (for instance, serial_isa_realizefn). Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Message-id: 1375207462-8141-1-git-send-email-mdroth@linux.vnet.ibm.com Cc: qemu-stable@nongnu.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29qapi: Rename ChardevBackend member "memory" to "ringbuf"Markus Armbruster1-5/+6
Commit 1da48c6 called the new member "memory" after commit 3949e59 standardized "ringbuf". Rename for consistency. However, member name "memory" is visible in QMP since 1.5. It's undocumented just like the driver name. Keep it working anyway. Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1374849874-25531-4-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29qemu-char: Register ring buffer driver with correct name "ringbuf"Markus Armbruster1-1/+4
The driver is new in 1.4, with the documented name "ringbuf". However, it's actual name is the completely undocumented "memory". Screwed up in commit 3949e59. Fix code to match documentation. Keep the undocumented name working as an alias for compatibility. Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1374849874-25531-3-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29Revert "chardev: Make the name of memory device consistent"Markus Armbruster1-8/+8
This reverts commit 6a85e60cb994bd95d1537aafbff65816f3de4637. Commit 51767e7 "qemu-char: Add new char backend CirMemCharDriver" introduced a memory ring buffer character device driver named "memory". Commit 3949e59 "qemu-char: Saner naming of memchar stuff & doc fixes" changed the driver name to "ringbuf", along with a whole bunch of other names, with the following rationale: Naming is a mess. The code calls the device driver CirMemCharDriver, the public API calls it "memory", "memchardev", or "memchar", and the special commands are named like "memchar-FOO". "memory" is a particularly unfortunate choice, because there's another character device driver called MemoryDriver. Moreover, the device's distinctive property is that it's a ring buffer, not that's in memory. This is what we released in 1.4.0. Unfortunately, the rename missed a critical instance of "memory": the actual driver name. Thus, the new device could be used only by an entirely undocumented name. The documented name did not work. Bummer. Commit 6a85e60 fixes this by changing the documentation to match the code. It also changes some, but not all related occurences of "ringbuf" to "memory". Left alone are identifiers in C code, HMP and QMP commands. The latter are external interface, so they can't be changed. The result is an inconsistent mess. Moreover, "memory" is a rotten name. The device's distinctive property is that it's a ring buffer, not that's in memory. User's don't care whether it's in RAM, flash, or carved into chocolate tablets by Oompa Loompas. Revert the commit. Next commit will fix just the bug. Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1374849874-25531-2-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-18char: io_channel_send: don't lose written bytesLaszlo Ersek1-22/+19
The g_io_channel_write_chars() documentation states, bytes_written: The number of bytes written. This can be nonzero even if the return value is not G_IO_STATUS_NORMAL. [...] io_channel_send() could lose such bytes before. Furthermore, the (status == G_IO_STATUS_EOF) condition used to evaluate to constant false whenever it was reached. When that condition actually held, it always led to -1 / EINVAL. This patch (almost) distinguishes G_IO_STATUS_EOF only when no bytes have been written, and then treats it as an error. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1373998781-29561-2-git-send-email-lersek@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-10qemu-char: Fix ringbuf option sizeMarkus Armbruster1-1/+1
Any attempt to use it trips an "opt->desc->type == QEMU_OPT_NUMBER" assertion. Broken in commit 1da48c65. Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-07-09trap signals for "-serial mon:stdio"Paolo Bonzini1-4/+9
With mon:stdio you can exit the VM by switching to the monitor and sending the "quit" command. It is then useful to pass Ctrl-C to the VM instead of exiting. This in turn lets us stop tying the default signal handling behavior to -nographic, removing gratuitous differences between "-display none" and "-nographic". This patch changes behavior for "-display none -serial mon:stdio", as expected, but not for "-display none -serial stdio". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1372868986-25988-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-28Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori1-13/+32
# By Gerd Hoffmann (13) and Michael Tokarev (1) # Via Michael Tokarev * mjt/trivial-patches: doc: we use seabios, not bochs bios qemu-socket: don't leak opts on error qemu-char: report udp backend errors qemu-char: add -chardev mux support qemu-char: minor mux chardev fixes qemu-char: use ChardevBackendKind in CharDriver qemu-char: don't leak opts on error qemu-char: fix documentation for telnet+wait socket flags qemu-char: print notification to stderr qemu-char: use more specific error_setg_* variants qemu-char: check optional fields using has_* qemu-socket: catch monitor_get_fd failures qemu-socket: drop pointless allocation qemu-socket: zero-initialize SocketAddress Message-id: 1372443465-22384-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-28qemu-char: Fix ID reuse after chardev-remove for qapi-based initMarkus Armbruster1-0/+1
Commit 2c5f488 introduced qapi-based character device initialization as a new code path in qemu_chr_new_from_opts(). Unfortunately, it failed to store parameter opts in the new chardev. Therefore, qemu_chr_delete() doesn't delete it. Even though the device is gone, its options linger, and any attempt to create another one with the same ID fails. Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1372339512-28149-1-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-28qemu-char: report udp backend errorsGerd Hoffmann1-0/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-28qemu-char: add -chardev mux supportGerd Hoffmann1-0/+18
Allow to explicitly create mux chardevs on the command line, like you can using QMP. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-28qemu-char: minor mux chardev fixesGerd Hoffmann1-4/+3
mux failure path has a memory leak. creating a mux chardev can't fail though, so just assert() that instead of fixing an error path which never ever runs anyway ... Also fix bid being leaked while being at it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-28qemu-char: use ChardevBackendKind in CharDriverGerd Hoffmann1-2/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-28qemu-char: don't leak opts on errorGerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-28qemu-char: print notification to stderrGerd Hoffmann1-2/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-28qemu-char: use more specific error_setg_* variantsGerd Hoffmann1-2/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-28qemu-char: check optional fields using has_*Gerd Hoffmann1-2/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-21qemu-char: use bool in qemu_chr_open_socket and simplify code a bitliguang1-13/+6
Local variables is_* should be bool by usage. While at it, simplify the logic/code a bit. Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-14create qemu_openpty_raw() helper function and move it to a separate fileMichael Tokarev1-72/+5
In two places qemu uses openpty() which is very system-dependent, and in both places the pty is switched to raw mode as well. Make a wrapper function which does both steps, and move all the system-dependent complexity into a separate file, together with static/local implementations of openpty() and cfmakeraw() from qemu-char.c. It is in a separate file, not part of oslib-posix.c, because openpty() often resides in -lutil which is not linked to every program qemu builds. This change removes #including of <pty.h>, <termios.h> and other rather specific system headers out of qemu-common.h, which isn't a place for such specific headers really. This version has been verified to build correctly on Linux, OpenBSD, FreeBSD and OpenIndiana. On the latter it lets qemu to be built with gtk gui which were not possible there due to missing openpty() and cfmakeraw(). Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Tested-by: Andreas Färber <andreas.faerber@web.de>
2013-06-11qemu-char: remove a few needless #includesMichael Tokarev1-2/+0
This removes <syslog.h> since we don't use syslogging, and removes second, solaris-specific, include of <net/if.h> (which is included in a common part of the file) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-10qemu-char: don't issue CHR_EVENT_OPEN in a BHMichael Roth1-21/+17
When CHR_EVENT_OPENED was initially added, it was CHR_EVENT_RESET, and it was issued as a bottom-half: 86e94dea5b740dad65446c857f6959eae43e0ba6 Which we basically used to print out a greeting/prompt for the monitor. AFAICT the only reason this was ever done in a BH was because in some cases we'd modify the chr_write handler for a new chardev backend *after* the site where we issued the reset (see: 86e94d:qemu_chr_open_stdio()) At some point this event was renamed to CHR_EVENT_OPENED, and we've maintained the use of this BH ever since. However, due to 9f939df955a4152aad69a19a77e0898631bb2c18, we schedule the BH via g_idle_add(), which is causing events to sometimes be delivered after we've already begun processing data from backends, leading to: known bugs: QMP: session negotation resets with OPENED event, in some cases this is causing new sessions to get sporadically reset potential bugs: hw/usb/redirect.c: can_read handler checks for dev->parser != NULL, which may be true if CLOSED BH has not been executed yet. In the past, OPENED quiesced outstanding CLOSED events prior to us reading client data. If it's delayed, our check may allow reads to occur even though we haven't processed the OPENED event yet, and when we do finally get the OPENED event, our state may get reset. qtest.c: can begin session before OPENED event is processed, leading to a spurious reset of the system and irq_levels gdbstub.c: may start a gdb session prior to the machine being paused To fix these, let's just drop the BH. Since the initial reasoning for using it still applies to an extent, work around that by deferring the delivery of CHR_EVENT_OPENED until after the chardevs have been fully initialized, toward the end of qmp_chardev_add() (or some cases, qemu_chr_new_from_opts()). This defers delivery long enough that we can be assured a CharDriverState is fully initialized before CHR_EVENT_OPENED is sent. Also, rather than requiring each chardev to do an explicit open, do it automatically, and allow the small few who don't desire such behavior to suppress the OPENED-on-init behavior by setting a 'explicit_be_open' flag. We additionally add missing OPENED events for stdio backends on w32, which were previously not being issued, causing us to not recieve the banner and initial prompts for qmp/hmp. Reported-by: Stefan Priebe <s.priebe@profihost.ag> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Message-id: 1370636393-21044-1-git-send-email-mdroth@linux.vnet.ibm.com Cc: qemu-stable@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-27chardev: fix "info chardev" outputGerd Hoffmann1-0/+3
Fill unset CharDriverState->filename with the backend name, so 'info chardev' will return at least the chardev type. Don't touch it in case the chardev init function filled it already, like the socket+pty chardevs do for example. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-27Revert "chardev: Get filename for new qapi backend"Gerd Hoffmann1-2/+0
Does not handle chardevs created via chardev-add monitor command. This reverts commit 2b220025993e76d4116781ca91a4fabc5ad9c722. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-22chardev: Get filename for new qapi backendLei Li1-0/+2
This patch sets the filename when the new qapi backend init from opts. The previous patch and discussions as link below: http://patchwork.ozlabs.org/patch/243896/ If anyone who have better idea to fix this please let me know your suggestions. Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Message-id: 1369132079-11377-3-git-send-email-lilei@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-22chardev: Make the name of memory device consistentLei Li1-8/+8
Now we have memory char device, but the backend name of it is a little confusion. We actually register it by 'memory', but the description in qemu-option, the name of open functions and the new api backend called it 'ringbuf'. It should keep consistent. This patch named it all to 'memory'. Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1369132079-11377-2-git-send-email-lilei@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-22glib: Fix some misuses of gsize/size_t typesPeter Crosthwaite1-1/+1
This unbreaks cross compile builds: configure --target-list="i386-softmmu" --cpu=i386 When building on a 64bit machine. Reported-by: David Holsgrove <david.holsgrove@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Message-id: 926326e96fd8685d74e9d5bf430fe4ad97a55289.1369191585.git.peter.crosthwaite@xilinx.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-20chardev: Make consistent with udp device for new qapi backendLei Li1-5/+5
When register and open a chardev udp, the backend name should be udp not dgram, and we do not have backend dgram in the chardev list. This patch makes the new qapi udp backend consistent with the original udp device. Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Message-id: 1369032665-18159-2-git-send-email-lilei@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-14portability: pty.h is glibc-specificPaolo Bonzini1-10/+0
This should fix building the GTK+ front-end on BSDs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1368533121-30796-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-25qemu-char: Set foo_tag = 0 when returning FALSE from callbacksHans de Goede1-0/+2
While reviewing some patches I found this problem where tcp_chr_accept does not clear listen_tag when returning FALSE, leading to a double g_source_remove of the underlying source. Not really a problem unless the id gets re-used in between, but still something we should fix. While at it I've also reviewed all the other code in qemu-char.c for similar problems and found that pty_chr_timer has the same problem. Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Message-id: 1366890782-10311-1-git-send-email-hdegoede@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22qemu-char: do not operate on sources from finalize callbacksPaolo Bonzini1-15/+40
Due to a glib bug, the finalize callback is called with the GMainContext lock held. Thus, any operation on the context from the callback will cause recursive locking and a deadlock. This happens, for example, when a client disconnects from a socket chardev. The fix for this is somewhat ugly, because we need to forego polymorphism and implement our own function to destroy IOWatchPoll sources. The right thing to do here would be child sources, but we support older glib versions that do not have them. Not coincidentially, glib developers found and fixed the deadlock as part of implementing child sources. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Message-id: 1366385529-10329-5-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22qemu-char: correct return value from chr_read functionsPaolo Bonzini1-6/+16
Even if a CharDriverState's source is blocked by the front-end, it must not be dropped. The IOWatchPoll that wraps it will take care of adding and removing it to the main loop. Only remove the source when the channel is closed; and in that case, make sure that the wrapping IOWatchPoll is removed too. These should just be theoretical bugs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366385529-10329-4-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22qemu-char: simplify pty pollingPaolo Bonzini1-24/+17
There is no need to use a timer and pty_chr_read to detect a connected pty. It is simpler to just call g_poll periodically and check for POLLHUP. It is done once per second, and only if the pty is disconnected, so it is cheap enough. Tested with "-monitor pty" and "-serial mon:pty", both of which work correctly and do not freeze QEMU. (How to test ptys? "socat -,raw,echo=0 /dev/pts/4,raw"). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366385529-10329-3-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22qemu-char: use consistent idiom for removing sourcesPaolo Bonzini1-9/+23
Always check that the source is active, and zero the tag afterwards. The occurrence in pty_chr_state will trigger with the next patch, the others are just theoretical. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366385529-10329-2-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-15Merge remote-tracking branch 'bonzini/hw-dirs' into stagingAnthony Liguori1-1/+1
* bonzini/hw-dirs: exec: remove useless declarations from memory-internal.h memory: move core typedefs to qemu/typedefs.h include: avoid useless includes of exec/ headers sysemu: avoid proliferation of include/ subdirectories tpm: reorganize headers and split hardware part configure: fix TPM logic acpi.h: make it self contained acpi: move declarations from pc.h to acpi.h hw: Add lost ARM core again Fix failure to create q35 machine Add linux-headers to QEMU_INCLUDES arm: fix location of some include files Conflicts: configure aliguori: trivial conflict in configure output Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2024-12-24 01:27:18 +0000