aboutsummaryrefslogtreecommitdiff
path: root/qapi
AgeCommit message (Collapse)AuthorFilesLines
2020-02-17qapi: Split control.json off misc.jsonKevin Wolf4-215/+222
misc.json contains definitions that are related to the system emulator, so it can't be used for other tools like the storage daemon. This patch moves basic functionality that is shared between all tools (and mostly related to the monitor itself) into a new control.json, which could be used in tools as well. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200129102239.31435-3-kwolf@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15qapi: Delete all the "foo: dropped in n.n" notesPeter Maydell3-7/+0
A handful of QAPI doc comments include lines like "ppcemb: dropped in 3.1". The doc comment parser will just put these into whatever the preceding section was; sometimes that's "Notes", and sometimes it's some random other section, as with "NetClientDriver" where the "'dump': dropped in 2.12" line ends up in the "Since:" section. This tends to render wrongly, more so in the upcoming rST generator, but sometimes even in the Texinfo, as in the case of QKeyCode: ac_bookmarks since 2.10 altgr, altgr_r: dropped in 2.10 Since commit 3264ffced3 (v4.2.0), we have a better place to tell users about deprecated and deleted functionality -- qemu-deprecated.texi. These "dropped in" remarks all predate it, and other feature drops of that vintage are not documented anywhere, so moving these to qemu-deprecated.texi makes little sense. Drop them instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200213175647.17628-19-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15qapi/migration.json: Replace _this_ with *this*Peter Maydell1-2/+2
The MigrationInfo::setup-time documentation is the only place where we use _this_ inline markup for emphasis, commonly rendered in italics. We would like to switch the doc comments to rST format, but rST doesn't recognize that markup and emits literal underscores. Switch to *this* instead. Changes markup to strong emphasis with Texinfo, commonly rendered as bold. With rST, it will go right back to emphasis / italics. rST also uses **this** for strong (commonly rendered bold) where Texinfo uses *this*. We have one place in the doc comments which uses strong/bold markup, in qapi/introspect.json: Note: the QAPI schema is also used to help define *internal* When we switch to rST that will be rendered as emphasis / italics. Markus (who wrote that) thinks that using emphasis / italics there is an improvement, so we leave that markup alone. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200213175647.17628-18-peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15qapi: Add blank lines before bulleted listsPeter Maydell4-0/+5
We would like to switch the doc comments to rST format. rST insists on a blank line before and after a bulleted list, but our Texinfo doc generator did not. Add some extra blank lines in the doc comments so they're acceptable rST input. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200213175647.17628-17-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15qapi: Use explicit bulleted listsPeter Maydell5-125/+119
A JSON block comment like this: Returns: nothing on success If @node is not a valid block device, DeviceNotFound If @name is not found, GenericError with an explanation renders like this: Returns: nothing on success If node is not a valid block device, DeviceNotFound If name is not found, GenericError with an explanation because whitespace is not significant. Use an actual bulleted list, so that the formatting is correct. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200213175647.17628-14-peter.maydell@linaro.org> Message-Id: <20200213175647.17628-15-peter.maydell@linaro.org> Message-Id: <20200213175647.17628-16-peter.maydell@linaro.org> [Three commits squashed into one] Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15qapi/ui.json: Avoid `...' Texinfo style quotingPeter Maydell1-12/+12
Avoid Texinfo style quoting with `...', because we would like to switch the doc comments to rST format, and rST treats it as a syntax error. Use '...' instead, as we do in other doc comments. This looks OK in Texinfo, and rST formats it as paired-quotation-marks. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200213175647.17628-13-peter.maydell@linaro.org> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15qapi/ui.json: Put input-send-event body text in the right placePeter Maydell1-7/+7
In the doc comment for input-send-event, there is a multi-line chunk of text ("The @device...take precedence") which is intended to be the main body text describing the event. However it has been placed after the arguments and Returns: section, which means that the parser actually thinks that this text is part of the "Returns" section text. Move the body text up to the top so that the parser correctly classifies it as body. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200213175647.17628-12-peter.maydell@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15qapi: Remove hardcoded tabsPeter Maydell2-5/+5
There are some stray hardcoded tabs in some of our json files; remove them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200213175647.17628-11-peter.maydell@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15qapi: Fix indent level on doc comments in json filesPeter Maydell20-670/+670
The current doc generation doesn't care much about indentation levels, but we would like to switch to an rST format, and rST does care about indentation. Make the doc comments more strongly consistent about indentation for multiline constructs like: @arg: description line 1 description line 2 Returns: line one line 2 so that there is always exactly one space after the colon, and subsequent lines align with the first. This commit is a purely whitespace change, and it does not alter the generated .texi files (because the texi generation code strips away all the extra whitespace). This does mean that we end up with some over-length lines. Note that when the documentation for an argument fits on a single line like this: @arg: one line only then stray extra spaces after the ':' don't affect the rST output, so I have not attempted to methodically fix them, though the preference is a single space here too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200213175647.17628-10-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15qapi: Fix incorrect "Not documented" claims in QMP documentationPeter Maydell1-118/+118
Some qapi doc comments have forgotten the ':' after the @argument, like this: # @filename Filename for the new image file # @size Size of the virtual disk in bytes The result is that these are parsed as part of the body text and appear as a run-on line: filename Filename for the new image file size Size of the virtual disk in bytes" followed by filename: string Not documented size: int Not documented in the 'Members' section. Correct the formatting. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200213175647.17628-9-peter.maydell@linaro.org> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15qapi/block-core.json: Use literal block for ascii artPeter Maydell1-7/+7
The ascii-art graph in the BlockLatencyHistogramInfo documentation doesn't render correctly, because the whitespace is collapsed. Use the '|' format that emits a literal 'example' block so the graph is displayed correctly. Strictly the Texinfo generated is still wrong because each line goes into its own @example environment, but it renders better than what we had before. Fixing this rendering is a necessary prerequisite for the upcoming rST generator, which otherwise complains about the inconsistent indentation in the ascii-art graph. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200213175647.17628-8-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-14qapi: Expand documentation for LostTickPolicyAndrea Bolognani1-11/+23
The current documentation is fairly terse and not easy to decode for someone who's not intimately familiar with the inner workings of timer devices. Expand on it by providing a somewhat verbose description of what behavior each policy will result in, as seen from both the guest OS and host point of view. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Message-Id: <20200211183744.210298-1-abologna@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-12ui: add show-cursor optionGerd Hoffmann1-0/+3
When enabled, this forces showing the mouse cursor, i.e. do not hide the pointer on mouse grabs. Defaults to off. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-02-07Merge remote-tracking branch ↵Peter Maydell1-1/+1
'remotes/kraxel/tags/audio-20200207-pull-request' into staging audio: bugfixes, mostly audio backend rewrite fallout # gpg: Signature made Fri 07 Feb 2020 07:45:44 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/audio-20200207-pull-request: audio: proper support for float samples in mixeng coreaudio: fix coreaudio playback audio/dsound: fix invalid parameters error audio: audio_generic_get_buffer_in should honor *size ossaudio: disable poll mode can't be reached ossaudio: prevent SIGSEGV in oss_enable_out audio: fix bug 1858488 audio: prevent SIGSEGV in AUD_get_buffer_size_out paaudio: remove unused variables audio: fix audio_generic_read audio: fix audio_generic_write audio/oss: fix buffer pos calculation Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-06audio: proper support for float samples in mixengKővágó, Zoltán1-1/+1
This adds proper support for float samples in mixeng by adding a new audio format for it. Limitations: only native endianness is supported. None of the virtual sound cards support float samples (it looks like most of them only support 8 and 16 bit, only hda supports 32 bit), it is only used for the audio backends (i.e. host side). Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-id: 8a8b0b5698401b78d3c4c8ec90aef83b95babb06.1580672076.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-02-05nbd: Allow description when creating NBD blockdevEric Blake1-3/+6
Allow blockdevs to match the feature already present in qemu-nbd -D. Enhance iotest 223 to cover it. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20191114024635.11363-5-eblake@redhat.com>
2020-02-02tpm_spapr: Support TPM for ppc64 using CRQ based interfaceStefan Berger1-3/+3
Implement support for TPM on ppc64 by implementing the vTPM CRQ interface as a frontend. It can use the tpm_emulator driver backend with the external swtpm. The Linux vTPM driver for ppc64 works with this emulation. This TPM emulator also handles the TPM 2 case. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20200121152935.649898-4-stefanb@linux.ibm.com> [dwg: Use device_class_set_props(), tweak Kconfig] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-30qapi/block-core: add option for io_uringAarushi Mehta1-1/+3
Since io_uring is the actual name of the Linux API, we use it as enum value even though the QAPI schema conventions would prefer io-uring. Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20200120141858.587874-3-stefanha@redhat.com Message-Id: <20200120141858.587874-3-stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-01-24qapi/qmp: add ObjectPropertyInfo.default-valueMarc-André Lureau1-1/+6
Report the default value associated with a property. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-26-marcandre.lureau@redhat.com> [Report it as type "any", not string. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24pvpanic: implement crashloaded event handlingzhenwei pi1-2/+22
Handle bit 1 write, then post event to monitor. Suggested by Paolo, declear a new event, using GUEST_PANICKED could cause upper layers to react by shutting down or rebooting the guest. In advance for extention, add GuestPanicInformation in event message. Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20200114023102.612548-3-pizhenwei@bytedance.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-14qapi: Generate command registration stuff into separate filesMarkus Armbruster1-0/+1
Having to include qapi-commands.h just for qmp_init_marshal() is suboptimal. Generate it into separate files. This lets monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h include less. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20191120182551.23795-4-armbru@redhat.com> [Typos in docs/devel/qapi-code-gen.txt fixed] Reviewed-by: Eric Blake <eblake@redhat.com>
2020-01-07Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-3/+177
virtio, pci, pc: fixes, features Bugfixes all over the place. HMAT support. New flags for vhost-user-blk utility. Auto-tuning of seg max for virtio storage. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 06 Jan 2020 17:05:05 GMT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (32 commits) intel_iommu: add present bit check for pasid table entries intel_iommu: a fix to vtd_find_as_from_bus_num() virtio-net: delete also control queue when TX/RX deleted virtio: reset region cache when on queue deletion virtio-mmio: update queue size on guest write tests: add virtio-scsi and virtio-blk seg_max_adjust test virtio: make seg_max virtqueue size dependent hw: fix using 4.2 compat in 5.0 machine types for i440fx/q35 vhost-user-scsi: reset the device if supported vhost-user: add VHOST_USER_RESET_DEVICE to reset devices hw/pci/pci_host: Let pci_data_[read/write] use unsigned 'size' argument hw/pci/pci_host: Remove redundant PCI_DPRINTF() virtio-mmio: Clear v2 transport state on soft reset ACPI: add expected files for HMAT tests (acpihmat) tests/bios-tables-test: add test cases for ACPI HMAT tests/numa: Add case for QMP build HMAT hmat acpi: Build Memory Side Cache Information Structure(s) hmat acpi: Build System Locality Latency and Bandwidth Information Structure(s) hmat acpi: Build Memory Proximity Domain Attributes Structure(s) numa: Extend CLI to provide memory side cache information ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-06block: introduce compress filter driverAndrey Shinkevich1-4/+6
Allow writing all the data compressed through the filter driver. The written data will be aligned by the cluster size. Based on the QEMU current implementation, that data can be written to unallocated clusters only. May be used for a backup job. Suggested-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 1575288906-551879-2-git-send-email-andrey.shinkevich@virtuozzo.com [mreitz: Replace NULL bdrv_get_format_name() by "(no format)"] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-01-06blkdebug: Allow taking/unsharing permissionsMax Reitz1-1/+13
Sometimes it is useful to be able to add a node to the block graph that takes or unshare a certain set of permissions for debugging purposes. This patch adds this capability to blkdebug. (Note that you cannot make blkdebug release or share permissions that it needs to take or cannot share, because this might result in assertion failures in the block layer. But if the blkdebug node has no parents, it will not take any permissions and share everything by default, so you can then freely choose what permissions to take and share.) Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20191108123455.39445-4-mreitz@redhat.com Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-01-05numa: Extend CLI to provide memory side cache informationLiu Jingqi1-2/+79
Add -numa hmat-cache option to provide Memory Side Cache Information. These memory attributes help to build Memory Side Cache Information Structure(s) in ACPI Heterogeneous Memory Attribute Table (HMAT). Before using hmat-cache option, enable HMAT with -machine hmat=on. Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-4-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2020-01-05numa: Extend CLI to provide memory latency and bandwidth informationLiu Jingqi1-2/+91
Add -numa hmat-lb option to provide System Locality Latency and Bandwidth Information. These memory attributes help to build System Locality Latency and Bandwidth Information Structure(s) in ACPI Heterogeneous Memory Attribute Table (HMAT). Before using hmat-lb option, enable HMAT with -machine hmat=on. Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Liu Jingqi <jingqi.liu@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-3-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2020-01-05numa: Extend CLI to provide initiator information for numa nodesTao Xu1-1/+9
In ACPI 6.3 chapter 5.2.27 Heterogeneous Memory Attribute Table (HMAT), The initiator represents processor which access to memory. And in 5.2.27.3 Memory Proximity Domain Attributes Structure, the attached initiator is defined as where the memory controller responsible for a memory proximity domain. With attached initiator information, the topology of heterogeneous memory can be described. Add new machine property 'hmat' to enable all HMAT specific options. Extend CLI of "-numa node" option to indicate the initiator numa node-id. In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report the platform's HMAT tables. Before using initiator option, enable HMAT with -machine hmat=on. Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jingqi Liu <jingqi.liu@intel.com> Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20191213011929.2520-2-tao3.xu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-12-18qapi: better document NVMe blockdev @device parameterDaniel P. Berrangé1-1/+5
Mention that this is a PCI device address & give the format it is expected in. Also mention that it must be first unbound from any host kernel driver. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-11-18bitmap: Enforce maximum bitmap name lengthEric Blake1-1/+1
We document that for qcow2 persistent bitmaps, the name cannot exceed 1023 bytes. It is inconsistent if transient bitmaps do not have to abide by the same limit, and it is unlikely that any existing client even cares about using bitmap names this long. It's time to codify that ALL bitmaps managed by qemu (whether persistent in qcow2 or not) have a documented maximum length. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20191114024635.11363-3-eblake@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-11-01target/arm/monitor: Introduce qmp_query_cpu_model_expansionAndrew Jones1-3/+3
Add support for the query-cpu-model-expansion QMP command to Arm. We do this selectively, only exposing CPU properties which represent optional CPU features which the user may want to enable/disable. Additionally we restrict the list of queryable cpu models to 'max', 'host', or the current type when KVM is in use. And, finally, we only implement expansion type 'full', as Arm does not yet have a "base" CPU type. More details and example queries are described in a new document (docs/arm-cpu-features.rst). Note, certainly more features may be added to the list of advertised features, e.g. 'vfp' and 'neon'. The only requirement is that we can detect invalid configurations and emit failures at QMP query time. For 'vfp' and 'neon' this will require some refactoring to share a validation function between the QMP query and the CPU realize functions. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Beata Michalska <beata.michalska@linaro.org> Message-id: 20191031142734.8590-2-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-29migration: add new migration state wait-unplugJens Freimann1-1/+4
This patch adds a new migration state called wait-unplug. It is entered after the SETUP state if failover devices are present. It will transition into ACTIVE once all devices were succesfully unplugged from the guest. So if a guest doesn't respond or takes long to honor the unplug request the user will see the migration state 'wait-unplug'. In the migration thread we query failover devices if they're are still pending the guest unplug. When all are unplugged the migration continues. If one device won't unplug migration will stay in wait_unplug state. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20191029114905.6856-9-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29qapi: add failover negotiated eventJens Freimann1-0/+19
This event is sent to let libvirt know that VIRTIO_NET_F_STANDBY feature is enabled. The primary device this virtio-net (standby) device is associated with, is now hotplugged by the virtio-net device. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-7-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com>
2019-10-29qapi: add unplug primary eventJens Freimann1-0/+19
This event is emitted when we sent a request to unplug a failover primary device from the Guest OS and it includes the device id of the primary device. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-6-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com>
2019-10-29qapi: Fix doc comment checking for commands and eventsMarkus Armbruster1-2/+0
When a command's 'data' is an object, its doc comment describes the arguments defined there. When 'data' names a type, the doc comment does not describe arguments. Instead, the doc generator inserts a pointer to the named type. An event's doc comment works the same. We don't actually check doc comments for commands and events. Instead, QAPISchema._def_command() forwards the doc comment to the implicit argument type, where it gets checked. Works because the check only cares for the implicit argument type's members. Not only is this needlessly hard to understand, it actually falls apart in two cases: * When 'data' is empty, there is nothing to forward to, and the doc comment remains unchecked. Demonstrated by test doc-bad-event-arg. * When 'data' names a type, we can't forward, as the type has its own doc comment. The command or event's doc comment remains unchecked. Demonstrated by test doc-bad-boxed-command-arg. The forwarding goes back to commit 069fb5b250 "qapi: Prepare for requiring more complete documentation", put to use in commit 816a57cd6e "qapi: Fix detection of bogus member documentation". That fix was incomplete. To fix this, make QAPISchemaCommand and QAPISchemaEvent check doc comments, and drop the forwarding of doc comments to implicit argument types. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20191024110237.30963-12-armbru@redhat.com>
2019-10-25qapi: add support for blkreplay driverPavel Dovgalyuk1-2/+16
This patch adds support for blkreplay driver to the blockdev options. Now blkreplay can be used with -blockdev command line option in the following format: -blockdev driver=blkreplay,image=file-node-name,node-name=replay-node-name This option makes possible implementation of the better command line support for record/replay invocations. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-10-22qapi: Allow introspecting fix for savevm's cooperation with blockdevPeter Krempa1-1/+8
'savevm' was buggy as it considered all monitor-owned block device nodes for snapshot. With the introduction of -blockdev, the common usage made all nodes including protocol and backing file nodes be monitor-owned and thus considered for snapshot. This is a problem since the 'file' protocol nodes can't have internal snapshots and it does not make sense to take snapshot of nodes representing backing files. This was fixed by commit 05f4aced658a02b02. Clients need to be able to detect whether this fix is present. Since savevm does not have an QMP alternative, add the feature for the 'human-monitor-command' backdoor which is used to call this command in modern use. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20191018081454.21369-6-armbru@redhat.com>
2019-10-22qapi: Add feature flags to commandsPeter Krempa1-1/+5
Similarly to features for struct types introduce the feature flags also for commands. This will allow notifying management layers of fixes and compatible changes in the behaviour of a command which may not be detectable any other way. The changes were heavily inspired by commit 6a8c0b51025. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20191018081454.21369-3-armbru@redhat.com>
2019-10-18Merge remote-tracking branch ↵Peter Maydell1-0/+12
'remotes/kraxel/tags/audio-20191018-pull-request' into staging audio: bugfixes, pa connection and stream naming. audio: 5.1/7.1 support for alsa, pa and usb-audio. # gpg: Signature made Fri 18 Oct 2019 08:41:26 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/audio-20191018-pull-request: paaudio: fix channel order for usb-audio 5.1 and 7.1 streams usbaudio: change playback counters to 64 bit usb-audio: support more than two channels of audio usb-audio: do not count on avail bytes actually available audio: basic support for multichannel audio audio: replace shift in audio_pcm_info with bytes_per_frame audio: support more than two channels in volume setting paaudio: get/put_buffer functions audio: make mixeng optional audio: add mixing-engine option (documentation) audio: paaudio: ability to specify stream name audio: paaudio: fix connection and stream name audio: fix parameter dereference before NULL check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-18audio: add mixing-engine option (documentation)Kővágó, Zoltán1-0/+6
This will allow us to disable mixeng when we use a decent backend. Disabling mixeng have a few advantages: * we no longer convert the audio output from one format to another, when the underlying audio system would just convert it to a third format. We no longer convert, only the underlying system, when needed. * the underlying system probably has better resampling and sample format converting methods anyway... * we may support formats that the mixeng currently does not support (S24 or float samples, more than two channels) * when using an audio server (like pulseaudio) different sound card outputs will show up as separate streams, even if we use only one backend Disadvantages: * audio capturing no longer works (wavcapture, and vnc audio extension) * some backends only support a single playback stream or very picky about the audio format. In this case we can't disable mixeng. Originally thw two main use cases of the disabled option was: using unsupported audio formats (5.1 and 7.1 audio) and having different pulseaudio streams per audio frontend. Since we can have multiple -audiodevs, the latter is not that important, so currently you only need this option if you want to use 5.1 or 7.1 audio (implemented in a later patch), otherwise it's probably better to stick to the old and tried mixeng, since it's less picky about the backends. The ideal solution would be to port as much as possible to gstreamer, but this is currently out of scope: https://wiki.qemu.org/Internships/ProjectIdeas/AudioGStreamer Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Message-id: 5765186a7aadd51a72bc7d3e804307f0ee8a34ce.1570996490.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-10-18audio: paaudio: ability to specify stream nameKővágó, Zoltán1-0/+6
This can be used to identify stream in tools like pavucontrol when one creates multiple -audiodevs or runs multiple qemu instances. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-id: 2d6e337c474ac84172d0809e6959c26b21d48120.1568157545.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-10-17dirty-bitmaps: remove deprecated autoload parameterJohn Snow1-5/+1
This parameter has been deprecated since 2.12.0 and is eligible for removal. Remove this parameter as it is actually completely ignored; let's not give false hope. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20191002232411.29968-1-jsnow@redhat.com
2019-10-10block/backup: use backup-top instead of write notifiersVladimir Sementsov-Ogievskiy1-1/+7
Drop write notifiers and use filter node instead. = Changes = 1. Add filter-node-name argument for backup qmp api. We have to do it in this commit, as 257 needs to be fixed. 2. There are no more write notifiers here, so is_write_notifier parameter is dropped from block-copy paths. 3. To sync with in-flight requests at job finish we now have drained removing of the filter, we don't need rw-lock. 4. Block-copy is now using BdrvChildren instead of BlockBackends 5. As backup-top owns these children, we also move block-copy state into backup-top's ownership. = Iotest changes = 56: op-blocker doesn't shoot now, as we set it on source, but then check on filter, when trying to start second backup. To keep the test we instead can catch another collision: both jobs will get 'drive0' job-id, as job-id parameter is unspecified. To prevent interleaving with file-posix locks (as they are dependent on config) let's use another target for second backup. Also, it's obvious now that we'd like to drop this op-blocker at all and add a test-case for two backups from one node (to different destinations) actually works. But not in these series. 141: Output changed: prepatch, "Node is in use" comes from bdrv_has_blk check inside qmp_blockdev_del. But we've dropped block-copy blk objects, so no more blk objects on source bs (job blk is on backup-top filter bs). New message is from op-blocker, which is the next check in qmp_blockdev_add. 257: The test wants to emulate guest write during backup. They should go to filter node, not to original source node, of course. Therefore we need to specify filter node name and use it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20191001131409.14202-6-vsementsov@virtuozzo.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-10qapi: query-blockstat: add driver specific file-posix statsAnton Nefedov1-0/+38
A block driver can provide a callback to report driver-specific statistics. file-posix driver now reports discard statistics Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-id: 20190923121737.83281-10-anton.nefedov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-10qapi: add unmap to BlockDeviceStatsAnton Nefedov1-6/+23
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20190923121737.83281-3-anton.nefedov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-10qapi: group BlockDeviceStats fieldsAnton Nefedov1-11/+15
Make the stat fields definition slightly more readable. Also reorder total_time_ns stats read-write-flush as done elsewhere. Cosmetic change only. Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190923121737.83281-2-anton.nefedov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-28qapi: Clean up member name case checkingMarkus Armbruster1-1/+1
QAPISchemaMember.check_clash() checks for member names that map to the same c_name(). Takes care of rejecting duplicate names. It also checks a naming rule: no uppercase in member names. That's a rather odd place to do it. Enforcing naming rules is check_name_str()'s job. qapi-code-gen.txt specifies the name case rule applies to the name as it appears in the schema. check_clash() checks c_name(name) instead. No difference, as c_name() leaves alone case, but unclean. Move the name case check into check_name_str(), less the c_name(). New argument @permit_upper suppresses it. Pass permit_upper=True for definitions (which are not members), and when the member's owner is whitelisted with pragma name-case-whitelist. Bonus: name-case-whitelist now applies to a union's inline base, too. Update qapi/qapi-schema.json pragma to whitelist union CpuInfo instead of CpuInfo's implicit base type's name q_obj_CpuInfo-base. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20190927134639.4284-6-armbru@redhat.com>
2019-09-28qmp-dispatch: Use CommandNotFound error for disabled commandsMichal Privoznik1-2/+3
If a command is disabled an error is reported. But due to usage of error_setg() the class of the error is GenericError which does not help callers in distinguishing this case from a case where a qmp command fails regularly due to other reasons. We used to use class CommandDisabled until the great error simplification (commit de253f1491 for QMP and commit 93b91c59db for qemu-ga, both v1.2.0). Use CommandNotFound error class, which is close enough. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Message-Id: <faeb030e6a1044f0fd88208edfdb1c5fafe5def9.1567171655.git.mprivozn@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Test update squashed in, commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-09-24make check-unit: use after free in test-opts-visitorAndrey Shinkevich1-4/+22
In the struct OptsVisitor, the 'repeated_opts' member points to a list in the 'unprocessed_opts' hash table after the list has been destroyed. A subsequent call to visit_type_int() references the deleted list. It results in use-after-free issue reproduced by running the test case under the Valgrind: valgrind tests/test-opts-visitor. A new mode ListMode::LM_TRAVERSED is declared to mark the list traversal completed. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Message-Id: <1565024586-387112-1-git-send-email-andrey.shinkevich@virtuozzo.com>
2019-09-19cutils: Move size_to_str() from "qemu-common.h" to "qemu/cutils.h"Philippe Mathieu-Daudé1-1/+1
"qemu/cutils.h" contains various qemu_strtosz_*() functions useful to convert strings to size. It seems natural to have the opposite usage (from size to string) there too. The function definition is already in util/cutils.c. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20190903120555.7551-1-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-09-12migration: Add validate-uuid capabilityYury Kotov1-1/+4
This capability realizes simple source validation by UUID. It's useful for live migration between hosts. Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Message-Id: <20190903162246.18524-2-yury-kotov@yandex-team.ru> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
generated by cgit v1.1 at 2024-09-29 01:51:38 +0000