aboutsummaryrefslogtreecommitdiff
path: root/qapi
AgeCommit message (Collapse)AuthorFilesLines
2015-10-29qstring: Make conversion from QObject * accept nullMarkus Armbruster1-3/+3
qobject_to_qstring() crashes on null, which is a trap for the unwary. Return null instead, and simplify a few callers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1444918537-18107-7-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-10-29qfloat qint: Make conversion from QObject * accept nullMarkus Armbruster1-10/+14
qobject_to_qfloat() and qobject_to_qint() crash on null, which is a trap for the unwary. Return null instead, and simplify a few callers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1444918537-18107-5-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-10-29qbool: Make conversion from QObject * accept nullMarkus Armbruster1-3/+3
qobject_to_qbool() crashes on null, which is a trap for the unwary. Return null instead, and simplify a few callers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1444918537-18107-3-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-10-23blockdev: Allow creation of BDS trees without BBMax Reitz1-4/+9
If the "id" field is missing from the options given to blockdev-add, just omit the BlockBackend and create the BlockDriverState tree alone. However, if "id" is missing, "node-name" must be specified; otherwise, the BDS tree would no longer be accessible. Many BDS options which are not parsed by bdrv_open() (like caching) cannot be specified for these BB-less BDS trees yet. A future patch will remove this limitation. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-23block: Remove host floppy supportMax Reitz1-5/+4
It has been deprecated as of 2.3, so we can now remove it. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-08qapi: add missing @Marc-André Lureau1-1/+1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-25utils: rename strtosz to use qemu prefixMarc-André Lureau1-2/+2
Not only it makes sense, but it gets rid of checkpatch warning: WARNING: consider using qemu_strtosz in preference to strtosz Also remove get rid of tabs to please checkpatch. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1442419377-9309-1-git-send-email-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-21qapi-introspect: Hide type namesMarkus Armbruster1-8/+4
To eliminate the temptation for clients to look up types by name (which are not ABI), replace all type names by meaningless strings. Reduces output of query-schema by 13 out of 85KiB. As a debugging aid, provide option -u to suppress the hiding. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1442401589-24189-27-git-send-email-armbru@redhat.com>
2015-09-21qapi: New QMP command query-qmp-schema for QMP introspectionMarkus Armbruster1-0/+277
qapi/introspect.json defines the introspection schema. It's designed for QMP introspection, but should do for similar uses, such as QGA. The introspection schema does not reflect all the rules and restrictions that apply to QAPI schemata. A valid QAPI schema has an introspection value conforming to the introspection schema, but the converse is not true. Introspection lowers away a number of schema details, and makes implicit things explicit: * The built-in types are declared with their JSON type. All integer types are mapped to 'int', because how many bits we use internally is an implementation detail. It could be pressed into external interface service as very approximate range information, but that's a bad idea. If we need range information, we better do it properly. * Implicit type definitions are made explicit, and given auto-generated names: - Array types, named by appending "List" to the name of their element type, like in generated C. - The enumeration types implicitly defined by simple union types, named by appending "Kind" to the name of their simple union type, like in generated C. - Types that don't occur in generated C. Their names start with ':' so they don't clash with the user's names. * All type references are by name. * The struct and union types are generalized into an object type. * Base types are flattened. * Commands take a single argument and return a single result. Dictionary argument or list result is an implicit type definition. The empty object type is used when a command takes no arguments or produces no results. The argument is always of object type, but the introspection schema doesn't reflect that. The 'gen': false directive is omitted as implementation detail. The 'success-response' directive is omitted as well for now, even though it's not an implementation detail, because it's not used by QMP. * Events carry a single data value. Implicit type definition and empty object type use, just like for commands. The value is of object type, but the introspection schema doesn't reflect that. * Types not used by commands or events are omitted. Indirect use counts as use. * Optional members have a default, which can only be null right now Instead of a mandatory "optional" flag, we have an optional default. No default means mandatory, default null means optional without default value. Non-null is available for optional with default (possible future extension). * Clients should *not* look up types by name, because type names are not ABI. Look up the command or event you're interested in, then follow the references. TODO Should we hide the type names to eliminate the temptation? New generator scripts/qapi-introspect.py computes an introspection value for its input, and generates a C variable holding it. It can generate awfully long lines. Marked TODO. A new test-qmp-input-visitor test case feeds its result for both tests/qapi-schema/qapi-schema-test.json and qapi-schema.json to a QmpInputVisitor to verify it actually conforms to the schema. New QMP command query-qmp-schema takes its return value from that variable. Its reply is some 85KiBytes for me right now. If this turns out to be too much, we have a couple of options: * We can use shorter names in the JSON. Not the QMP style. * Optionally return the sub-schema for commands and events given as arguments. Right now qmp_query_schema() sends the string literal computed by qmp-introspect.py. To compute sub-schema at run time, we'd have to duplicate parts of qapi-introspect.py in C. Unattractive. * Let clients cache the output of query-qmp-schema. It changes only on QEMU upgrades, i.e. rarely. Provide a command query-qmp-schema-hash. Clients can have a cache indexed by hash, and re-query the schema only when they don't have it cached. Even simpler: put the hash in the QMP greeting. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-21qapi: Introduce a first class 'any' typeMarkus Armbruster4-0/+35
It's first class, because unlike '**', it actually works, i.e. doesn't require 'gen': false. '**' will go away next. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-21qapi: Make output visitor return qnull() instead of NULLMarkus Armbruster1-2/+6
Before commit 1d10b44, it crashed. Since then, it returns NULL, with a FIXME comment. The FIXME is valid: code that assumes QObject * can't be null exists. I'm not aware of a way to feed this problematic return value to code that actually chokes on null in the current code, but the next few commits will create one, failing "make check". Commit 481b002 solved a very similar problem by introducing a special null QObject. Using this special null QObject is clearly the right way to resolve this FIXME, so do that, and update the test accordingly. However, the patch isn't quite right: it messes up the reference counting. After about SIZE_MAX visits, the reference counter overflows, failing the assertion in qnull_destroy_obj(). Because that's many orders of magnitude more visits of nulls than we expect, we take this patch despite its flaws, to get the QMP introspection stuff in without further delay. We'll want to fix it for real before the release. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1442401589-24189-21-git-send-email-armbru@redhat.com>
2015-09-15crypto: introduce new base module for TLS credentialsDaniel P. Berrange1-0/+21
Introduce a QCryptoTLSCreds class to act as the base class for storing TLS credentials. This will be later subclassed to provide handling of anonymous and x509 credential types. The subclasses will be user creatable objects, so instances can be created & deleted via 'object-add' and 'object-del' QMP commands respectively, or via the -object command line arg. If the credentials cannot be initialized an error will be reported as a QMP reply, or on stderr respectively. The idea is to make it possible to represent and manage TLS credentials independently of the network service that is using them. This will enable multiple services to use the same set of credentials and minimize code duplication. A later patch will convert the current VNC server TLS code over to use this object. The representation of credentials will be functionally equivalent to that currently implemented in the VNC server with one exception. The new code has the ability to (optionally) load a pre-generated set of diffie-hellman parameters, if the file dh-params.pem exists, whereas the current VNC server will always generate them on startup. This is beneficial for admins who wish to avoid the (small) time sink of generating DH parameters at startup and/or avoid depleting entropy. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-04qcow2: add option to clean unused cache entries after some timeAlberto Garcia1-1/+6
This adds a new 'cache-clean-interval' option that cleans all qcow2 cache entries that haven't been used in a certain interval, given in seconds. This allows setting a large L2 cache size so it can handle scenarios with lots of I/O and at the same time use little memory during periods of inactivity. This feature currently relies on MADV_DONTNEED to free that memory, so it is not useful in systems that don't follow that behavior. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: a70d12da60433df9360ada648b3f34b8f6f354ce.1438690126.git.berto@igalia.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2015-08-19qapi/qmp-event.c: Don't manually include os-win32.h/os-posix.hPeter Maydell1-8/+0
qmp-event.c already includes qemu-common.h, so manually including os-win32.h/os-posix.h is unnecessary (and potentially fragile, since it's duplicating the #ifdef logic that chooses which of the two we need). Remove the unnecessary include logic. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2015-07-07migration: create migration eventJuan Quintela1-0/+12
We have one argument that tells us what event has happened. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-07-02qmp: Add optional bool "unmap" to drive-mirrorFam Zheng1-1/+7
If specified as "true", it allows discarding on target sectors where source is not allocated. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-02qapi: Rename 'dirty-bitmap' mode to 'incremental'John Snow1-4/+4
If we wish to make differential backups a feature that's easy to access, it might be pertinent to rename the "dirty-bitmap" mode to "incremental" to make it clear what /type/ of backup the dirty-bitmap is helping us perform. This is an API breaking change, but 2.4 has not yet gone live, so we have this flexibility. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1433463642-21840-2-git-send-email-jsnow@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-25Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell1-1/+5
staging # gpg: Signature made Wed Jun 24 16:27:53 2015 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: virito-blk: drop duplicate check qemu-iotests: fix 051.out after qdev error message change iov: don't touch iov in iov_send_recv() raw-posix: Introduce hdev_is_sg() raw-posix: Use DPRINTF for DEBUG_FLOPPY raw-posix: DPRINTF instead of DEBUG_BLOCK_PRINT Fix migration in case of scsi-generic block: Use bdrv_is_sg() everywhere nvme: Fix memleak in nvme_dma_read_prp vvfat: add a label option util/hbitmap: Add an API to reset all set bits in hbitmap virtio-blk: Use blk_drain() to drain IO requests block-backend: Introduce blk_drain() throttle: Check current timers before updating any_timer_armed[] block: Let bdrv_drain_all() to call aio_poll() for each AioContext Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-23throttle: Fix typo in the documentation of block_set_io_throttleAlberto Garcia1-1/+1
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23vvfat: add a label optionWolfgang Bumiller1-1/+5
Until now the vvfat volume label was hardcoded to be "QEMU VVFAT", now you can pass a file.label=labelname option to the -drive to change it. The FAT structure defines the volume label to be limited to 11 bytes and is filled up spaces when shorter than that. The trailing spaces however aren't exposed to the user by operating systems. [Added missing comment '#' characters in block-core.json to fix build errors. --Stefan] Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Message-id: 1434706529-13895-2-git-send-email-w.bumiller@proxmox.com Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster2-2/+0
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster5-58/+58
These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qobject: Use 'bool' for qboolEric Blake2-2/+2
We require a C99 compiler, so let's use 'bool' instead of 'int' when dealing with boolean values. There are few enough clients to fix them all in one pass. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Alberto Garcia <berto@igalia.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-19qom: Make enum string tables const-correctDaniel P. Berrange3-5/+6
The enum string table parameters in various QOM/QAPI methods are declared 'const char *strings[]'. This results in const warnings if passed a variable that was declared as static const char * const strings[] = { .... }; Add the extra const annotation to the parameters, since neither the string elements, nor the array itself should ever be modified. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-12Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell1-2/+27
staging # gpg: Signature made Fri Jun 12 15:57:47 2015 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: qemu-iotests: expand test 093 to support group throttling throttle: Update throttle infrastructure copyright throttle: add the name of the ThrottleGroup to BlockDeviceInfo throttle: acquire the ThrottleGroup lock in bdrv_swap() throttle: Add throttle group support throttle: Add throttle group infrastructure tests throttle: Add throttle group infrastructure throttle: Extract timers from ThrottleState into a separate structure raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size Revert "iothread: release iothread around aio_poll" Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-12throttle: add the name of the ThrottleGroup to BlockDeviceInfoAlberto Garcia1-1/+3
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 172df91f09c69c6f0440a697bbd1b3f95b077ee4.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12throttle: Add throttle group supportAlberto Garcia1-1/+24
The throttle group support use a cooperative round robin scheduling algorithm. The principles of the algorithm are simple: - Each BDS of the group is used as a token in a circular way. - The active BDS computes if a wait must be done and arms the right timer. - If a wait must be done the token timer will be armed so the token will become the next active BDS. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: f0082a86f3ac01c46170f7eafe2101a92e8fde39.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12qmp/hmp: add rocker device supportScott Feldman1-0/+286
Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-29qapi: add dirty bitmap statusJohn Snow1-2/+21
Bitmaps can be in a handful of different states with potentially more to come as we tool around with migration and persistence patches. Management applications may need to know why certain bitmaps are unavailable for various commands, e.g. busy in another operation, busy being migrated, etc. Right now, all we offer is BlockDirtyInfo's boolean member 'frozen'. Instead of adding more booleans, replace it by an enumeration member 'status' with values 'active' and 'frozen'. Then add new value 'disabled'. Incompatible change. Fine because the changed part hasn't been released so far. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-05-11Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-0/+14
pc, virtio enhancements Memory hot-unplug support for pc, MSI-X mapping update speedup for virtio-pci, misc refactorings and bugfixes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon May 11 08:23:43 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (28 commits) acpi: update expected files for memory unplug virtio-scsi: Move DEFINE_VIRTIO_SCSI_FEATURES to virtio-scsi virtio-net: Move DEFINE_VIRTIO_NET_FEATURES to virtio-net pci: Merge pci_nic_init() into pci_nic_init_nofail() acpi: add a missing backslash to the \_SB scope. qmp-event: add event notification for memory hot unplug error acpi: add hardware implementation for memory hot unplug acpi: fix "Memory device control fields" register acpi: extend aml_field() to support UpdateRule acpi, mem-hotplug: add unplug cb for memory device acpi, mem-hotplug: add unplug request cb for memory device acpi, mem-hotplug: add acpi_memory_slot_status() to get MemStatus docs: update documentation for memory hot unplug virtio: coding style tweak pci: remove hard-coded bar size in msix_init_exclusive_bar() virtio-pci: speedup MSI-X masking and unmasking virtio: introduce vector to virtqueues mapping virtio-ccw: using VIRTIO_NO_VECTOR instead of 0 for invalid virtqueue monitor: check return value of qemu_find_net_clients_except() monitor: replace the magic number 255 with MAX_QUEUE_NUM ... Conflicts: hw/s390x/s390-virtio-bus.c [PMM: fixed conflict in s390_virtio_scsi_properties and s390_virtio_net_properties arrays; since the result of the two conflicting patches is to empty the property arrays completely, the conflict resolution is to remove them entirely.] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-08docs: update BLOCK_IMAGE_CORRUPTED documentationAlberto Garcia1-1/+1
Label the "size" and "offset" fields in BLOCK_IMAGE_CORRUPTED as optional, and clarify that the latter refers to the host's offset into the image. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-05-05qapi: Drop inline nested struct in query-versionEric Blake1-7/+19
A future patch will be using a 'name':{dictionary} entry in the QAPI schema to specify a default value for an optional argument (see previous commit message for more details why); but existing use of inline nested structs conflicts with that goal. This patch fixes one of only two commands relying on nested types, by breaking the nesting into an explicit type; it means that the type is now boxed instead of unboxed in C code, but the QMP wire format is unaffected by this change. Prefer the safer g_new0() while making the conversion. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-05-05qapi: Use 'struct' instead of 'type' in schemaEric Blake4-37/+37
Referring to "type" as both a meta-type (built-in, enum, union, alternate, or struct) and a specific type (the name that the schema uses for declaring structs) is confusing. Do the bulk of the conversion to "struct" in qapi schema, with a fairly mechanical: for f in `find -name '*.json'; do sed -i "s/'type'/'struct'/"; done followed by manually filtering out the places where we have a 'type' embedded in 'data'. Then tweak a couple of tests whose output changes slightly due to longer lines. I also verified that the generated files for QMP and QGA (such as qmp-commands.h) are the same before and after, as assurance that I didn't leave in any accidental member name changes. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-05-05qapi: Use 'alternate' to replace anonymous unionEric Blake1-4/+2
Previous patches have led up to the point where I create the new meta-type "'alternate':'Foo'". See the previous patches for documentation; I intentionally split as much work into earlier patches to minimize the size of this patch, but a lot of it is churn due to testsuite fallout after updating to the new type. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-04-28qmp: Add dirty bitmap status field in query-blockJohn Snow1-1/+4
Add the "frozen" status booleans, to inform clients when a bitmap is occupied doing a task. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1429314609-29776-13-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28qmp: add block-dirty-bitmap-clearJohn Snow1-0/+14
Add bdrv_clear_dirty_bitmap and a matching QMP command, qmp_block_dirty_bitmap_clear that enables a user to reset the bitmap attached to a drive. This allows us to reset a bitmap in the event of a full drive backup. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1429314609-29776-12-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28qmp: Add support of "dirty-bitmap" sync mode for drive-backupJohn Snow1-4/+10
For "dirty-bitmap" sync mode, the block job will iterate through the given dirty bitmap to decide if a sector needs backup (backup all the dirty clusters and skip clean ones), just as allocation conditions of "top" sync mode. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1429314609-29776-11-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28block: Add bitmap successorsJohn Snow1-0/+1
A bitmap successor is an anonymous BdrvDirtyBitmap that is intended to be created just prior to a sensitive operation (e.g. Incremental Backup) that can either succeed or fail, but during the course of which we still want a bitmap tracking writes. On creating a successor, we "freeze" the parent bitmap which prevents its deletion, enabling, anonymization, or creating a bitmap with the same name. On success, the parent bitmap can "abdicate" responsibility to the successor, which will inherit its name. The successor will have been tracking writes during the course of the backup operation. The parent will be safely deleted. On failure, we can "reclaim" the successor from the parent, unifying them such that the resulting bitmap describes all writes occurring since the last successful backup, for instance. Reclamation will thaw the parent, but not explicitly re-enable it. BdrvDirtyBitmap operations that target a single bitmap are protected by assertions that the bitmap is not frozen and/or disabled. BdrvDirtyBitmap operations that target a group of bitmaps, such as bdrv_{set,reset}_dirty will ignore frozen/disabled drives with a conditional instead. Internal functions that enable/disable dirty bitmaps have assertions added to them to prevent modifying frozen bitmaps. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1429314609-29776-10-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28qmp: Add block-dirty-bitmap-add and block-dirty-bitmap-removeJohn Snow1-0/+55
The new command pair is added to manage a user created dirty bitmap. The dirty bitmap's name is mandatory and must be unique for the same device, but different devices can have bitmaps with the same names. The granularity is an optional field. If it is not specified, we will choose a default granularity based on the cluster size if available, clamped to between 4K and 64K to mirror how the 'mirror' code was already choosing granularity. If we do not have cluster size info available, we choose 64K. This code has been factored out into a helper shared with block/mirror. This patch also introduces the 'block_dirty_bitmap_lookup' helper, which takes a device name and a dirty bitmap name and validates the lookup, returning NULL and setting errp if there is a problem with either field. This helper will be re-used in future patches in this series. The types added to block-core.json will be re-used in future patches in this series, see: 'qapi: Add transaction support to block-dirty-bitmap-{add, enable, disable}' Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1429314609-29776-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28qmp: Ensure consistent granularity typeJohn Snow1-1/+1
We treat this field with a variety of different types everywhere in the code. Now it's just uint32_t. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1429314609-29776-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28qapi: Add optional field "name" to block dirty bitmapFam Zheng1-1/+3
This field will be set for user created dirty bitmap. Also pass in an error pointer to bdrv_create_dirty_bitmap, so when a name is already taken on this BDS, it can report an error message. This is not global check, two BDSes can have dirty bitmap with a common name. Implemented bdrv_find_dirty_bitmap to find a dirty bitmap by name, will be used later when other QMP commands want to reference dirty bitmap by name. Add bdrv_dirty_bitmap_make_anon. This unsets the name of dirty bitmap. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1429314609-29776-3-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28block: add 'node-name' field to BLOCK_IMAGE_CORRUPTEDAlberto Garcia1-6/+11
Since this event can occur in nodes that cannot have a device name associated, include also a field with the node name. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 147cec5b3594f4bec0cb41c98afe5fcbfb67567c.1428485266.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28block/null: Latency simulation by adding new option "latency-ns"Fam Zheng1-1/+4
Aio context switch should just work because the requests will be drained, so the scheduled timer(s) on the old context will be freed. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1427852740-24315-2-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-27qmp-event: add event notification for memory hot unplug errorZhu Guihua1-0/+14
When memory hot unplug fails, this patch adds support to send QMP event to notify mgmt about this failure. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-03-27block: Document blockdev-add's immaturityMarkus Armbruster1-0/+4
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1426858337-21423-1-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-19block: Fix blockdev-backup not to use funky error classMarkus Armbruster1-3/+0
Error classes are a leftover from the days of "rich" error objects. New code should always use ERROR_CLASS_GENERIC_ERROR. Commit b7b9d39..7c6a4ab added uses of ERROR_CLASS_DEVICE_NOT_FOUND. Replace them. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-19raw-posix: Deprecate host floppy passthroughMarkus Armbruster1-0/+2
Raise your hand if you have a physical floppy drive in a computer you've powered on in 2015. Okay, I see we got a few weirdos in the audience. That's okay, weirdos are welcome here. Kidding aside, media change detection doesn't fully work, isn't going to be fixed, and floppy passthrough just isn't earning its keep anymore. Deprecate block driver host_floppy now, so we can drop it after a grace period. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-16block: Fix block-set-write-threshold not to use funky error classMarkus Armbruster1-4/+0
Error classes are a leftover from the days of "rich" error objects. New code should always use ERROR_CLASS_GENERIC_ERROR. Commit e246211 added a use of ERROR_CLASS_DEVICE_NOT_FOUND. Replace it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qcow2: Add refcount_bits to format-specific infoMax Reitz1-1/+4
Add the bit width of every refcount entry to the format-specific information. In contrast to lazy_refcounts and the corrupt flag, this should be always emitted, even for compat=0.10 although it does not support any refcount width other than 16 bits. This is because if a boolean is optional, one normally assumes it to be false when omitted; but if an integer is not specified, it is rather difficult to guess its value. This new field breaks some test outputs, fix them. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block: add event when disk usage exceeds thresholdFrancesco Romani1-1/+50
Managing applications, like oVirt (http://www.ovirt.org), make extensive use of thin-provisioned disk images. To let the guest run smoothly and be not unnecessarily paused, oVirt sets a disk usage threshold (so called 'high water mark') based on the occupation of the device, and automatically extends the image once the threshold is reached or exceeded. In order to detect the crossing of the threshold, oVirt has no choice but aggressively polling the QEMU monitor using the query-blockstats command. This lead to unnecessary system load, and is made even worse under scale: deployments with hundreds of VMs are no longer rare. To fix this, this patch adds: * A new monitor command `block-set-write-threshold', to set a mark for a given block device. * A new event `BLOCK_WRITE_THRESHOLD', to report if a block device usage exceeds the threshold. * A new `write_threshold' field into the `BlockDeviceInfo' structure, to report the configured threshold. This will allow the managing application to use smarter and more efficient monitoring, greatly reducing the need of polling. [Updated qemu-iotests 067 output to add the new 'write_threshold' property. --Stefan] [Changed g_assert_false() to !g_assert() to fix the build on older glib versions. --Kevin] Signed-off-by: Francesco Romani <fromani@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1421068273-692-1-git-send-email-fromani@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.1 at 2024-12-26 09:43:32 +0000