aboutsummaryrefslogtreecommitdiff
path: root/qapi
AgeCommit message (Collapse)AuthorFilesLines
2020-05-28qcow2: Expose bitmaps' size during measureEric Blake1-5/+11
It's useful to know how much space can be occupied by qcow2 persistent bitmaps, even though such metadata is unrelated to the guest-visible data. Report this value as an additional QMP field, present when measuring an existing image and output format that both support bitmaps. Update iotest 178 and 190 to updated output, as well as new coverage in 190 demonstrating non-zero values made possible with the recently-added qemu-img bitmap command (see 3b51ab4b). The new 'bitmaps size:' field is displayed automatically as part of 'qemu-img measure' any time it is present in QMP (that is, any time both the source image being measured and destination format support bitmaps, even if the measurement is 0 because there are no bitmaps present). If the field is absent, it means that no bitmaps can be copied (source, destination, or both lack bitmaps, including when measuring based on size rather than on a source image). This behavior is compatible with an upcoming patch adding 'qemu-img convert --bitmaps': that command will fail in the same situations where this patch omits the field. The addition of a new field demonstrates why we should always zero-initialize qapi C structs; while the qcow2 driver still fully populates all fields, the raw and crypto drivers had to be tweaked to avoid uninitialized data. Consideration was also given towards having a 'qemu-img measure --bitmaps' which errors out when bitmaps are not possible, and otherwise sums the bitmaps into the existing allocation totals rather than displaying as a separate field, as a potential convenience factor. But this was ultimately decided to be more complexity than necessary when the QMP interface was sufficient enough with bitmaps remaining a separate field. See also: https://bugzilla.redhat.com/1779904 Reported-by: Nir Soffer <nsoffer@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200521192137.1120211-3-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2020-05-25audio/jack: add JACK client audiodevGeoffrey McRae1-2/+54
This commit adds a new audiodev backend to allow QEMU to use JACK as both an audio sink and source. Signed-off-by: Geoffrey McRae <geoff@hostfission.com> Message-Id: <20200512101603.E3DB73A038E@moya.office.hostfission.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-20qemu-sockets: add abstract UNIX domain socket supportxiaoqiang zhao1-1/+7
unix_listen/connect_saddr now support abstract address types two aditional BOOL switches are introduced: tight: whether to set @addrlen to the minimal string length, or the maximum sun_path length. default is TRUE abstract: whether we use abstract address. default is FALSE cli example: -monitor unix:/tmp/unix.socket,abstract,tight=off OR -chardev socket,path=/tmp/unix.socket,id=unix1,abstract,tight=on Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-05-13qcow2: add zstd cluster compressionDenis Plotnikov1-1/+2
zstd significantly reduces cluster compression time. It provides better compression performance maintaining the same level of the compression ratio in comparison with zlib, which, at the moment, is the only compression method available. The performance test results: Test compresses and decompresses qemu qcow2 image with just installed rhel-7.6 guest. Image cluster size: 64K. Image on disk size: 2.2G The test was conducted with brd disk to reduce the influence of disk subsystem to the test results. The results is given in seconds. compress cmd: time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd] src.img [zlib|zstd]_compressed.img decompress cmd time ./qemu-img convert -O qcow2 [zlib|zstd]_compressed.img uncompressed.img compression decompression zlib zstd zlib zstd ------------------------------------------------------------ real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) user 65.0 15.8 5.3 2.5 sys 3.3 0.2 2.0 2.0 Both ZLIB and ZSTD gave the same compression ratio: 1.57 compressed image size in both cases: 1.4G Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> QAPI part: Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200507082521.29210-4-dplotnikov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-13qcow2: introduce compression type featureDenis Plotnikov1-2/+20
The patch adds some preparation parts for incompatible compression type feature to qcow2 allowing the use different compression methods for image clusters (de)compressing. It is implied that the compression type is set on the image creation and can be changed only later by image conversion, thus compression type defines the only compression algorithm used for the image, and thus, for all image clusters. The goal of the feature is to add support of other compression methods to qcow2. For example, ZSTD which is more effective on compression than ZLIB. The default compression is ZLIB. Images created with ZLIB compression type are backward compatible with older qemu versions. Adding of the compression type breaks a number of tests because now the compression type is reported on image creation and there are some changes in the qcow2 header in size and offsets. The tests are fixed in the following ways: * filter out compression_type for many tests * fix header size, feature table size and backing file offset affected tests: 031, 036, 061, 080 header_size +=8: 1 byte compression type 7 bytes padding feature_table += 48: incompatible feature compression type backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change) * add "compression type" for test output matching when it isn't filtered affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206, 242, 255, 274, 280 Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> QAPI part: Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-07migration/xbzrle: add encoding rateWei Wang1-1/+4
Users may need to check the xbzrle encoding rate to know if the guest memory is xbzrle encoding-friendly, and dynamically turn off the encoding if the encoding rate is low. Signed-off-by: Yi Sun <yi.y.sun@intel.com> Signed-off-by: Wei Wang <wei.w.wang@intel.com> Message-Id: <1588208375-19556-1-git-send-email-wei.w.wang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07migration/throttle: Add cpu-throttle-tailslow migration parameterKeqian Zhu1-0/+48
At the tail stage of throttling, the Guest is very sensitive to CPU percentage while the @cpu-throttle-increment is excessive usually at tail stage. If this parameter is true, we will compute the ideal CPU percentage used by the Guest, which may exactly make the dirty rate match the dirty rate threshold. Then we will choose a smaller throttle increment between the one specified by @cpu-throttle-increment and the one generated by ideal CPU percentage. Therefore, it is compatible to traditional throttling, meanwhile the throttle increment won't be excessive at tail stage. This may make migration time longer, and is disabled by default. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Message-Id: <20200413101508.54793-1-zhukeqian1@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-04-30qapi: Assert non-input visitors see only valid narrow integersMarkus Armbruster1-0/+6
visit_type_intN() and visit_type_uintN() fail when the value is out of bounds. This is appropriate with an input visitor: the value comes from input, and input may be bad. It should never happen with the other visitors: the value comes from the caller, and callers must keep it within bounds. Assert that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200424084338.26803-10-armbru@redhat.com>
2020-04-30qapi: Assert output visitors see only valid enum valuesMarkus Armbruster1-9/+0
output_type_enum() fails when *obj is not a valid value of the enum type. Should not happen. Drop the check, along with its unit tests. This unmasks qapi_enum_lookup()'s assertion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200424084338.26803-9-armbru@redhat.com> [Commit message tweaked]
2020-04-30qapi: Fix Visitor contract for start_alternate()Markus Armbruster1-7/+0
The contract demands v->start_alternate() for input and dealloc visitors, but visit_start_alternate() actually requires it for input and clone visitors. Fix the contract, and delete superfluous qapi_dealloc_start_alternate(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200424084338.26803-8-armbru@redhat.com>
2020-04-30qapi: Assert incomplete object occurs only in dealloc visitorMarkus Armbruster1-0/+5
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200424084338.26803-7-armbru@redhat.com>
2020-04-30qobject: Eliminate qdict_iter(), use qdict_first(), qdict_next()Markus Armbruster1-10/+11
qdict_iter() has just three uses and no test coverage. Replace by qdict_first(), qdict_next() for more concise code and less type punning. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200415083048.14339-5-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2020-04-02qmp: fix leak on callbacks that return both value and errorMarc-André Lureau1-0/+2
Direct leak of 4120 byte(s) in 1 object(s) allocated from: #0 0x7fa114931887 in __interceptor_calloc (/lib64/libasan.so.6+0xb0887) #1 0x7fa1144ad8f0 in g_malloc0 (/lib64/libglib-2.0.so.0+0x588f0) #2 0x561e3c9c8897 in qmp_object_add /home/elmarco/src/qemu/qom/qom-qmp-cmds.c:291 #3 0x561e3cf48736 in qmp_dispatch /home/elmarco/src/qemu/qapi/qmp-dispatch.c:155 #4 0x561e3c8efb36 in monitor_qmp_dispatch /home/elmarco/src/qemu/monitor/qmp.c:145 #5 0x561e3c8f09ed in monitor_qmp_bh_dispatcher /home/elmarco/src/qemu/monitor/qmp.c:234 #6 0x561e3d08c993 in aio_bh_call /home/elmarco/src/qemu/util/async.c:136 #7 0x561e3d08d0a5 in aio_bh_poll /home/elmarco/src/qemu/util/async.c:164 #8 0x561e3d0a535a in aio_dispatch /home/elmarco/src/qemu/util/aio-posix.c:380 #9 0x561e3d08e3ca in aio_ctx_dispatch /home/elmarco/src/qemu/util/async.c:298 #10 0x7fa1144a776e in g_main_context_dispatch (/lib64/libglib-2.0.so.0+0x5276e) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200325184723.2029630-3-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-19Add rx-softmmuYoshinori Sato1-1/+3
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> [PMD: Squashed patches from Richard Henderson modifying qapi/common.json and tests/machine-none-test.c] Message-Id: <20200224141923.82118-21-ysato@users.sourceforge.jp> [PMD: Added @since 5.0 tag in SysEmuTarget] Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-03-17net: Complete qapi-fication of netdev_addEric Blake1-13/+1
We've had all the required pieces for doing a type-safe representation of netdev_add as a flat union for quite some time now (since 0e55c381f6 in v2.7.0, released in 2016), but did not make the final switch to using it because of concern about whether a command-line regression in accepting "1" in place of 1 for integer arguments would be problematic. Back then, we did not have the deprecation cycle to allow us to make progress. But now that we have waited so long, other problems have crept in: for example, our desire to add qemu-storage-daemon is hampered by the inability to express net objects, and we are unable to introspect what we actually accept. Additionally, our round-trip through QemuOpts silently eats any argument that expands to an array, rendering dnssearch, hostfwd, and guestfwd useless through QMP: {"execute": "netdev_add", "arguments": { "id": "netdev0", "type": "user", "dnssearch": [ { "str": "8.8.8.8" }, { "str": "8.8.4.4" } ]}} So without further ado, let's turn on proper QAPI. netdev_add() was a trivial wrapper around net_client_init(), which did a few steps prior to calling net_client_init1(); with this patch, we now skip directly to net_client_init1(). In addition to fixing array parameters, the following additional differences occur: - {"execute": "netdev_add", "arguments": {"type": "help"}} no longer attempts to print help to stdout and exit. Bug fix, broken in 547203ead4 'net: List available netdevs with "-netdev help"', v2.12.0. - {"execute": "netdev_add", "arguments': {... "ipv6-net": "..." }} no longer attempts to desugar the undocumented ipv6-net magic string into the proper "ipv6-prefix" and "ipv6-prefixlen". Undocumented misfeature, introduced in commit 7aac531ef2 "qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addresses", v2.6.0. - {'execute':'netdev_add', 'arguments':{'id':'net2', 'type':'hubport', 'hubid':"2"}} {"error": {"class": "GenericError", "desc": "Invalid parameter type for 'hubid', expected: integer"}} Used to succeed: since our command line treats everything as strings, our not-so-round-trip conversion from QAPI -> QemuOpts -> QAPI lost the original typing and turned everything into a string; now that we skip the QemuOpts, the JSON input has to match the exact QAPI type. But this stricter QMP is desirable, and introspection is sufficient for any affected applications to make sure they use it correctly. In qmp_netdev_add(), we still have to create a QemuOpts object so that qmp_netdev_del() will be able to remove a hotplugged network device; but the opts->head remains empty since we now manage all parsing through the QAPI object rather than QemuOpts; a separate patch will address the abuse of QemuOpts as a witness for whether a NetClientState is a netdev. In the meantime, our argument that we are okay requires auditing all uses of option group "netdev": - qemu_netdev_opts: option group definition, empty .desc[] - CLI (CLI netdev parsing ends before monitors start, so while monitors can mess with CLI netdevs, CLI cannot mess with monitor netdevs): - main() case QEMU_OPTION_netdev: store CLI definition - main() case QEMU_OPTION_readconfig, case QEMU_OPTION_writeconfig: similar, dealing only with CLI - net_init_clients(): Pass CLI to net_client_init() - Monitor: - hmp_netdev_add(): straightforward parse into net_client_init() - qmp_netdev_add(): subject of this patch, used to add full object to option group, now just adds bare-bones id - qmp_netdev_del(), netdev_del_completion(): check the option group solely for id, as a 'is this a netdev' predicate Reported-by: Alex Kirillov <lekiravi@yandex-team.ru> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200317201711.322764-2-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message typo fixed] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-17qmp: constify QmpCommand and listMarc-André Lureau2-5/+5
Since 0b69f6f72ce47a37a749b056b6d5ec64c61f11e8 "qapi: remove qmp_unregister_command()", the command list can be declared const. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-Id: <20200316171824.2319695-1-marcandre.lureau@redhat.com> [Rebased] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-17qapi: Mark deprecated QMP parts with feature 'deprecated'Markus Armbruster6-57/+115
Add feature 'deprecated' to the deprecated QMP commands, so their deprecation becomes visible in output of query-qmp-schema. Looks like this: {"name": "query-cpus", "ret-type": "[164]", "meta-type": "command", "arg-type": "0", ---> "features": ["deprecated"]} Management applications could conceivably use this for static checking. The deprecated commands are change, cpu-add, migrate-set-cache-size, migrate_set_downtime, migrate_set_speed, query-cpus, query-events, query-migrate-cache-size. The deprecated command arguments are block-commit arguments @base and @top, and block_set_io_throttle, blockdev-change-medium, blockdev-close-tray, blockdev-open-tray, eject argument @device. The deprecated command results are query-cpus-fast result @arch, query-block result @dirty-bitmaps, query-named-block-nodes result @encryption_key_missing and result @dirty-bitmaps's member @status. Same for query-block result @inserted, which mirrors query-named-block-nodes. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200317115459.31821-27-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2020-03-17qapi: Replace qmp_dispatch()'s TODO comment by an explanationMarkus Armbruster1-1/+5
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200317115459.31821-25-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2020-03-17qapi: Simplify how qmp_dispatch() gets the request IDMarkus Armbruster1-11/+12
We convert the request object to a QDict twice: first in qmp_dispatch() to get the request ID, and then again in qmp_dispatch_check_obj(), which converts to QDict, then checks and returns it. We can't get the request ID from the latter, because it's null when the qdict flunks the checks. Move the checked conversion to QDict from qmp_dispatch_check_obj() to qmp_dispatch(), and drop the duplicate there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200317115459.31821-24-armbru@redhat.com>
2020-03-17qapi: Simplify how qmp_dispatch() deals with QCO_NO_SUCCESS_RESPMarkus Armbruster1-12/+13
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200317115459.31821-23-armbru@redhat.com>
2020-03-17qapi: Inline do_qmp_dispatch() into qmp_dispatch()Markus Armbruster1-49/+41
Both functions check @request is a QDict, and both have code for QCO_NO_SUCCESS_RESP. This wasn't the case back when they were created. It's a sign of muddled responsibilities. Inline. The next commits will clean up some more. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200317115459.31821-22-armbru@redhat.com>
2020-03-17qapi: Add feature flags to struct membersMarkus Armbruster1-1/+5
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200317115459.31821-21-armbru@redhat.com>
2020-03-17qapi: Add feature flags to remaining definitionsMarkus Armbruster1-11/+9
In v4.1.0, we added feature flags just to struct types (commit 6a8c0b5102^..f3ed93d545), to satisfy an immediate need (commit c9d4070991 "file-posix: Add dynamic-auto-read-only QAPI feature"). In v4.2.0, we added them to commands (commit 23394b4c39 "qapi: Add feature flags to commands") to satisfy another immediate need (commit d76744e65e "qapi: Allow introspecting fix for savevm's cooperation with blockdev"). Add them to the remaining definitions: enumeration types, union types, alternate types, and events. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200317115459.31821-13-armbru@redhat.com>
2020-03-17qapi: Belatedly update doc comment for @wait deprecationMarkus Armbruster1-0/+1
Commit a9b305ba29 "socket: allow wait=false for client socket" deprecated use of @wait for client socket chardevs, but neglected to update char.json's doc comment. Make up for that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200317115459.31821-3-armbru@redhat.com>
2020-03-16qapi/audio: add documentation for AudioFormatVolker Rümelin1-0/+14
The review for patch ed2a4a7941 "audio: proper support for float samples in mixeng" suggested this would be a good idea. Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Tested-by: John Arbuckle <programmingkidx@gmail.com> Message-id: 20200308193321.20668-1-vr_qemu@t-online.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-03-13migration/throttle: Add throttle-trig-thres migration parameterKeqian Zhu1-1/+15
Currently, if the bytes_dirty_period is more than the 50% of bytes_xfer_period, we start or increase throttling. If we make this percentage higher, then we can tolerate higher dirty rate during migration, which means less impact on guest. The side effect of higher percentage is longer migration time. We can make this parameter configurable to switch between mig- ration time first or guest performance first. The default value is 50 and valid range is 1 to 100. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Message-Id: <20200224023142.39360-1-zhukeqian1@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-11qapi: Add '@allow-write-only-overlay' feature for 'blockdev-snapshot'Peter Krempa1-1/+8
Anounce that 'blockdev-snapshot' command's permissions allow changing of the backing file if the 'consistent_read' permission is not required. This is useful for libvirt to allow late opening of the backing chain during a blockdev-mirror. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200310113831.27293-8-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06block/rbd: Add support for ceph namespacesFlorian Florensa1-0/+3
Starting from ceph Nautilus, RBD has support for namespaces, allowing for finer grain ACLs on images inside a pool, and tenant isolation. In the rbd cli tool documentation, the new image-spec and snap-spec are : - [pool-name/[namespace-name/]]image-name - [pool-name/[namespace-name/]]image-name@snap-name When using an non namespace's enabled qemu, it complains about not finding the image called namespace-name/image-name, thus we only need to parse the image once again to find if there is a '/' in its name, and if there is, use what is before it as the name of the namespace to later pass it to rados_ioctx_set_namespace. rados_ioctx_set_namespace if called with en empty string or a null pointer as the namespace parameters pretty much does nothing, as it then defaults to the default namespace. The namespace is extracted inside qemu_rbd_parse_filename, stored in the qdict, and used in qemu_rbd_connect to make it work with both qemu-img, and qemu itself. Signed-off-by: Florian Florensa <fflorensa@online.net> Message-Id: <20200110111513.321728-2-fflorensa@online.net> Reviewed-by: Jason Dillaman <dillaman@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06qemu-storage-daemon: Add --monitor optionKevin Wolf2-1/+6
This adds and parses the --monitor option, so that a QMP monitor can be used in the storage daemon. The monitor offers commands defined in the QAPI schema at storage-daemon/qapi/qapi-schema.json. The --monitor options currently allows to create multiple monitors with the same ID. This part of the interface is considered unstable. We will reject such configurations as soon as we have a design for the monitor subsystem to perform these checks. (In the system emulator, we depend on QemuOpts rejecting duplicate IDs.) Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-21-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06monitor: Add allow_hmp parameter to monitor_init()Kevin Wolf1-1/+2
Add a new parameter allow_hmp to monitor_init() so that the storage daemon can disable HMP. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-20-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06monitor: Create QAPIfied monitor_init()Kevin Wolf1-0/+36
This adds a new QAPI-based monitor_init() function. The existing monitor_init_opts() is rewritten to simply put its QemuOpts parameter into a visitor and pass the resulting QAPI object to monitor_init(). This will cause some change in those error messages for the monitor options in the system emulator that are now generated by the visitor rather than explicitly checked in monitor_init_opts(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-17-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06qapi: Create 'pragma' moduleKevin Wolf3-25/+26
We want to share the whitelists between the system emulator schema and the storage daemon schema, so move all the pragmas from the main schema file into a separate file that can be included from both. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-16-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06qemu-storage-daemon: Add --export optionKevin Wolf1-0/+27
Add a --export option to qemu-storage-daemon to export a block node. For now, only NBD exports are implemented. Apart from the 'type' option (which is the implied key), it maps the arguments for nbd-server-add to the command line. Example: --export nbd,device=disk,name=test-export,writable=on Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-12-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06blockdev-nbd: Boxed argument type for nbd-server-addKevin Wolf1-4/+14
Move the arguments of nbd-server-add to a new struct BlockExportNbd and convert the command to 'boxed': true. This makes it easier to share code with the storage daemon. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-11-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06qemu-storage-daemon: Add --nbd-server optionKevin Wolf1-0/+24
Add a --nbd-server option to qemu-storage-daemon to start the built-in NBD server right away. It maps the arguments for nbd-server-start to the command line, with the exception that it uses SocketAddress instead of SocketAddressLegacy: New interfaces shouldn't use legacy types, and the additional nesting would be nasty on the command line. Example (only with required options): --nbd-server addr.type=inet,addr.host=localhost,addr.port=10809 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-10-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06qapi: Flatten object-addKevin Wolf1-3/+9
Mapping object-add to the command line as is doesn't result in nice syntax because of the nesting introduced with 'props'. This becomes nicer and more consistent with device_add and netdev_add when we accept properties for the object on the top level instead. 'props' is still accepted after this patch, but marked as deprecated. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-8-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06block: Move sysemu QMP commands to QAPI block moduleKevin Wolf2-386/+386
QMP commands that are related to the system emulator and don't make sense in the context of tools such as qemu-storage-daemon should live in qapi/block.json rather than qapi/block-core.json. Move them there. The associated data types are actually also used in code shared with the tools, so they stay in block-core.json. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-6-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06block: Move common QMP commands to block-core QAPI moduleKevin Wolf2-284/+283
block-core is for everything that isn't related to the system emulator. Internal snapshots, the NBD server and quorum events make sense in the tools, too, so move them to block-core. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-5-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-02-28multifd: Add zstd compression multifd supportJuan Quintela1-1/+3
Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28multifd: Add multifd-zstd-level parameterJuan Quintela1-3/+26
This parameter specifies the zstd compression level. The next patch will put it to use. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com>
2020-02-28multifd: Add zlib compression multifd supportJuan Quintela1-1/+2
Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28multifd: Add multifd-zlib-level parameterJuan Quintela1-3/+27
This parameter specifies the zlib compression level. The next patch will put it to use. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28multifd: Add multifd-compression parameterJuan Quintela1-3/+27
This will store the compression method to use. We start with none. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> --- Rename multifd-method to multifd-compression
2020-02-20qapi: Allow getting flat output from 'query-named-block-nodes'Peter Krempa1-1/+6
When a management application manages node names there's no reason to recurse into backing images in the output of query-named-block-nodes. Add a parameter to the command which will return just the top level structs. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Message-Id: <4470f8c779abc404dcf65e375db195cd91a80651.1579509782.git.pkrempa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [mreitz: Fixed coding style] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-02-18commit: Expose on-error option in QMPKevin Wolf1-0/+4
Now that the error handling in the common block job is fixed, we can expose the on-error option in QMP instead of hard-coding it as 'report' in qmp_block_commit(). This fulfills the promise that the old comment in that function made, even if a bit later than expected: "This will be part of the QMP command, if/when the BlockdevOnError change for blkmirror makes it in". Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200214200812.28180-7-kwolf@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-02-18qapi: Document meaning of 'ignore' BlockdevOnError for jobsKevin Wolf1-1/+4
It is not obvious what 'ignore' actually means for block jobs: It could be continuing the job and returning success in the end despite the error (no block job does this). It could also mean continuing and returning failure in the end (this is what stream does). And it can mean retrying the failed request later (this is what backup, commit and mirror do). This (somewhat inconsistent) behaviour was introduced and described for stream and mirror in commit 32c81a4a6ec. backup and commit were introduced later and use the same model as mirror. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200214200812.28180-2-kwolf@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-02-17qapi: Split control.json off misc.jsonKevin Wolf4-215/+222
misc.json contains definitions that are related to the system emulator, so it can't be used for other tools like the storage daemon. This patch moves basic functionality that is shared between all tools (and mostly related to the monitor itself) into a new control.json, which could be used in tools as well. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200129102239.31435-3-kwolf@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15qapi: Delete all the "foo: dropped in n.n" notesPeter Maydell3-7/+0
A handful of QAPI doc comments include lines like "ppcemb: dropped in 3.1". The doc comment parser will just put these into whatever the preceding section was; sometimes that's "Notes", and sometimes it's some random other section, as with "NetClientDriver" where the "'dump': dropped in 2.12" line ends up in the "Since:" section. This tends to render wrongly, more so in the upcoming rST generator, but sometimes even in the Texinfo, as in the case of QKeyCode: ac_bookmarks since 2.10 altgr, altgr_r: dropped in 2.10 Since commit 3264ffced3 (v4.2.0), we have a better place to tell users about deprecated and deleted functionality -- qemu-deprecated.texi. These "dropped in" remarks all predate it, and other feature drops of that vintage are not documented anywhere, so moving these to qemu-deprecated.texi makes little sense. Drop them instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200213175647.17628-19-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15qapi/migration.json: Replace _this_ with *this*Peter Maydell1-2/+2
The MigrationInfo::setup-time documentation is the only place where we use _this_ inline markup for emphasis, commonly rendered in italics. We would like to switch the doc comments to rST format, but rST doesn't recognize that markup and emits literal underscores. Switch to *this* instead. Changes markup to strong emphasis with Texinfo, commonly rendered as bold. With rST, it will go right back to emphasis / italics. rST also uses **this** for strong (commonly rendered bold) where Texinfo uses *this*. We have one place in the doc comments which uses strong/bold markup, in qapi/introspect.json: Note: the QAPI schema is also used to help define *internal* When we switch to rST that will be rendered as emphasis / italics. Markus (who wrote that) thinks that using emphasis / italics there is an improvement, so we leave that markup alone. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200213175647.17628-18-peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15qapi: Add blank lines before bulleted listsPeter Maydell4-0/+5
We would like to switch the doc comments to rST format. rST insists on a blank line before and after a bulleted list, but our Texinfo doc generator did not. Add some extra blank lines in the doc comments so they're acceptable rST input. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200213175647.17628-17-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
generated by cgit v1.1 at 2024-11-03 12:45:05 +0000