aboutsummaryrefslogtreecommitdiff
path: root/qapi/migration.json
AgeCommit message (Collapse)AuthorFilesLines
2022-09-07qapi: fix examples of events missing timestampVictor Toso1-4/+23
I've used real timestamp and changing them one by one so they would not be all equal. Problem was noticed when using the example as a test case for Go bindings. Signed-off-by: Victor Toso <victortoso@redhat.com> Message-Id: <20220901085840.22520-11-victortoso@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2022-07-20Add dirty-sync-missed-zero-copy migration statLeonardo Bras1-1/+6
Signed-off-by: Leonardo Bras <leobras@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20220711211112.18951-3-leobras@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2022-07-20migration: Add postcopy-preempt capabilityPeter Xu1-1/+6
Firstly, postcopy already preempts precopy due to the fact that we do unqueue_page() first before looking into dirty bits. However that's not enough, e.g., when there're host huge page enabled, when sending a precopy huge page, a postcopy request needs to wait until the whole huge page that is sending to finish. That could introduce quite some delay, the bigger the huge page is the larger delay it'll bring. This patch adds a new capability to allow postcopy requests to preempt existing precopy page during sending a huge page, so that postcopy requests can be serviced even faster. Meanwhile to send it even faster, bypass the precopy stream by providing a standalone postcopy socket for sending requested pages. Since the new behavior will not be compatible with the old behavior, this will not be the default, it's enabled only when the new capability is set on both src/dst QEMUs. This patch only adds the capability itself, the logic will be added in follow up patches. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20220707185342.26794-2-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2022-07-20softmmu/dirtylimit: Implement dirty page rate limitHyman Huang(黄勇)1-0/+80
Implement dirtyrate calculation periodically basing on dirty-ring and throttle virtual CPU until it reachs the quota dirty page rate given by user. Introduce qmp commands "set-vcpu-dirty-limit", "cancel-vcpu-dirty-limit", "query-vcpu-dirty-limit" to enable, disable, query dirty page limit for virtual CPU. Meanwhile, introduce corresponding hmp commands "set_vcpu_dirty_limit", "cancel_vcpu_dirty_limit", "info vcpu_dirty_limit" so the feature can be more usable. "query-vcpu-dirty-limit" success depends on enabling dirty page rate limit, so just add it to the list of skipped command to ensure qmp-cmd-test run successfully. Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <4143f26706d413dd29db0b672fe58b3d3fbe34bc.1656177590.git.huangy81@chinatelecom.cn> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2022-06-22migration: Change zero_copy_send from migration parameter to migration ↵Leonardo Bras1-24/+9
capability When originally implemented, zero_copy_send was designed as a Migration paramenter. But taking into account how is that supposed to work, and how the difference between a capability and a parameter, it only makes sense that zero-copy-send would work better as a capability. Taking into account how recently the change got merged, it was decided that it's still time to make it right, and convert zero_copy_send into a Migration capability. Signed-off-by: Leonardo Bras <leobras@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: always define the capability, even on non-Linux but error if set; avoids build problems with the capability
2022-05-16Merge tag 'pull-migration-20220516a' of https://gitlab.com/dagrh/qemu into ↵Richard Henderson1-0/+24
staging Migration pull 2022-05-16 (This replaces the 28th April through 10th May sets) Compared to that last set it just has the Alpine uring check that Leo has added; although that's also now fixed upstream in Alpine. It contains: TLS test fixes from Dan Zerocopy migration feature from Leo Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAmKCY80ACgkQBRYzHrxb # /eeEEhAAoUogch7ifxFItr1EA0AU6Sgd3Dcn8wY9pm0NySVg7OcIpk1H++A3CgIh # bubJSwRmpIxGw+5q5w5OvBukFCGYMlAK7J8k1tZmaqdKS8wD0ZwhpPyqTWd14Q/v # xXSGOQfHMMvbBILiXPjSkfNw8yKJhZr+lW39uMz/kZRwZUmTcrdKAT3Q8PW+1DI9 # v3mNoFNXqtDlHcQ4nQ1TGk/RDO6oXDlTJwdnjoJT3Dopf8Jhl2etvZgVk2kOf4i5 # LmJbSVBr5FNOhJ6P4WL4OEQFOiXXquKdfuGTXIGGhkrW2WkPZulQwB6uO4Gv1wf2 # aj9bLDAFoPxFx2zYS6S/9L6rGeBMcTL9xHCfzyylM6YRjoscRdxXc67PClw71JUy # regsoSQej0FpmsGx0uuAsDjCELleVIjeYzuQo5OYOP1BCg/5unLIrMgkyQw7COJI # w+MIZq7IqvUTehU2yXpUGOqPkyDLBlib92dMRgqqG9r9UU7iL3BREbGW4ugW+GM2 # a9k8W9HjyDIIODsdXy1ugPHgjr/arHDAPgYosJMLvjTfdJDcIldAw6CbCcqhCDES # UOjMVN9VS+716nY2AqvtEHxf47YwqmeRb+tg4SQ0dHLH5Pvfe2bk1sbZiiQpcelt # Bd88yeBOpcmdzJVur2V4fEZXu5JB/qt/jeJeQa82hS3k93PWm/w= # =Axhk # -----END PGP SIGNATURE----- # gpg: Signature made Mon 16 May 2022 07:46:37 AM PDT # gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full] * tag 'pull-migration-20220516a' of https://gitlab.com/dagrh/qemu: multifd: Implement zero copy write in multifd migration (multifd-zero-copy) multifd: Send header packet without flags if zero-copy-send is enabled multifd: multifd_send_sync_main now returns negative on error migration: Add migrate_use_tls() helper migration: Add zero-copy-send parameter for QMP/HMP for Linux QIOChannelSocket: Implement io_writev zero copy flag & io_flush for CONFIG_LINUX QIOChannel: Add flags on io_writev and introduce io_flush callback meson.build: Fix docker-test-build@alpine when including linux/errqueue.h tests: ensure migration status isn't reported as failed tests: add multifd migration tests of TLS with x509 credentials tests: add multifd migration tests of TLS with PSK credentials tests: convert multifd migration tests to use common helper tests: convert XBZRLE migration test to use common helper tests: add migration tests of TLS with x509 credentials tests: add migration tests of TLS with PSK credentials tests: add more helper macros for creating TLS x509 certs tests: fix encoding of IP addresses in x509 certs Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-16migration: Add zero-copy-send parameter for QMP/HMP for LinuxLeonardo Bras1-0/+24
Add property that allows zero-copy migration of memory pages on the sending side, and also includes a helper function migrate_use_zero_copy_send() to check if it's enabled. No code is introduced to actually do the migration, but it allow future implementations to enable/disable this feature. On non-Linux builds this parameter is compiled-out. Signed-off-by: Leonardo Bras <leobras@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20220513062836.965425-5-leobras@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2022-05-16qapi: Stop using whitespace for alignment in commentsAndrea Bolognani1-4/+4
Perfectly aligned things look pretty, but keeping them that way as the schema evolves requires churn, and in some cases newly-added lines are not aligned properly. Overall, trying to align things is just not worth the trouble. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Message-Id: <20220503073737.84223-8-abologna@redhat.com> Message-Id: <20220503073737.84223-9-abologna@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Two patches squashed together] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2022-05-16qapi: Drop unnecessary empty lines in commentsAndrea Bolognani1-7/+0
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20220503073737.84223-5-abologna@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2022-05-16qapi: Add missing separators between sectionsAndrea Bolognani1-0/+4
This only affects readability. The generated documentation doesn't change. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20220503073737.84223-4-abologna@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2022-04-21qapi: Fix documentation for query-xen-replication-statusAndrea Bolognani1-1/+1
The correct return type is ReplicationStatus, not ReplicationResult. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Message-Id: <20220420153408.243584-3-abologna@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2022-04-05qapi: Fix calc-dirty-rate exampleMarkus Armbruster1-1/+1
The example shows {"command": ...}, which is wrong. Fix it to {"execute": ...}. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20220401082028.3583296-1-armbru@redhat.com> Reviewed-by: Victor Toso <victortoso@redhat.com>
2022-04-05qapi: fix example of query-colo-status commandVictor Toso1-1/+1
The example output is missing the mandatory member @last-mode in the return value. Fix it. Signed-off-by: Victor Toso <victortoso@redhat.com> Message-Id: <20220331190633.121077-7-victortoso@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2022-03-31qapi: fix example of UNPLUG_PRIMARY eventVictor Toso1-1/+3
Example output lacks mandatory member @timestamp. Provide it. Example output is not properly formatted. Fixing it by: - Adding '<-' to signalize it is receiving the data; - Breaking lines similar to the other examples. Signed-off-by: Victor Toso <victortoso@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-Id: <20220328140604.41484-8-victortoso@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2022-02-28qapi/migration: Fix examples document wrong field name for argumentsFabian Holler1-5/+5
The examples for the snapshot-* and calc-dirty-rate commands document that arguments for the commands are passed in a 'data' field. This is wrong, passing them in a "data" field results in the error: {"error": {"class": "GenericError", "desc": "QMP input member 'data' is unexpected"}} Arguments are expected to be passed in an field called "arguments". Replace "data" with "arguments" in the snapshot-* and calc-dirty-rate command examples. Signed-off-by: Fabian Holler <fabian.holler@simplesurance.de> Message-Id: <20220222170116.63105-1-fabian.holler@simplesurance.de> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2022-01-28migration: Tally pre-copy, downtime and post-copy bytes independentlyDavid Edmondson1-1/+12
Provide information on the number of bytes copied in the pre-copy, downtime and post-copy phases of migration. Signed-off-by: David Edmondson <david.edmondson@oracle.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2021-11-09docs: fix 'sample-pages' option tagHyman Huang(黄勇)1-1/+1
commit f78d4ed701 has fixed qemu tag, making 'sample-pages' option tag involved by accident, which introduced since 6.1 in commit 7afa08cd8fd. revert this line. Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2021-11-06docs: fix qemu incorrect tagHyman Huang(黄勇)1-5/+5
The patchset merged in 71864eadd9a ("migration/dirtyrate: introduce struct and adjust DirtyRateStat") was targeting QEMU 6.1 but got merged later, so correct the tag for 6.2. Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2021-11-01migration/dirtyrate: implement dirty-bitmap dirtyrate calculationHyman Huang(黄勇)1-2/+4
introduce dirty-bitmap mode as the third method of calc-dirty-rate. implement dirty-bitmap dirtyrate calculation, which can be used to measuring dirtyrate in the absence of dirty-ring. introduce "dirty_bitmap:-b" option in hmp calc_dirty_rate to indicate dirty bitmap method should be used for calculation. Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2021-11-01migration/dirtyrate: implement dirty-ring dirtyrate calculationHyman Huang(黄勇)1-2/+14
use dirty ring feature to implement dirtyrate calculation. introduce mode option in qmp calc_dirty_rate to specify what method should be used when calculating dirtyrate, either page-sampling or dirty-ring should be passed. introduce "dirty_ring:-r" option in hmp calc_dirty_rate to indicate dirty ring method should be used for calculation. Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn> Message-Id: <7db445109bd18125ce8ec86816d14f6ab5de6a7d.1624040308.git.huangy81@chinatelecom.cn> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2021-11-01migration/dirtyrate: introduce struct and adjust DirtyRateStatHyman Huang(黄勇)1-0/+30
introduce "DirtyRateMeasureMode" to specify what method should be used to calculate dirty rate, introduce "DirtyRateVcpu" to store dirty rate for each vcpu. use union to store stat data of specific mode Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn> Message-Id: <661c98c40f40e163aa58334337af8f3ddf41316a.1624040308.git.huangy81@chinatelecom.cn> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2021-10-29qapi: Mark unstable QMP parts with feature 'unstable'Markus Armbruster1-6/+29
Add special feature 'unstable' everywhere the name starts with 'x-', except for InputBarrierProperties member x-origin and MemoryBackendProperties member x-use-canonical-path-for-ramblock-id, because these two are actually stable. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Acked-by: John Snow <jsnow@redhat.com> Message-Id: <20211028102520.747396-3-armbru@redhat.com>
2021-08-26qapi: make 'if' condition strings simple identifiersMarc-André Lureau1-5/+5
Change the 'if' condition strings to be C-agnostic. It will accept '[A-Z][A-Z0-9_]*' identifiers. This allows to express configuration conditions in other languages (Rust or Python for ex) or other more suitable forms. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: John Snow <jsnow@redhat.com> Message-Id: <20210804083105.97531-11-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Rebased with semantic conflict in redefined-event.json] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-06-08migration/dirtyrate: make sample page count configurableHyman Huang(黄勇)1-3/+12
introduce optional sample-pages argument in calc-dirty-rate, making sample page count per GB configurable so that more accurate dirtyrate can be calculated. Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn> Message-Id: <3103453a3b2796f929269c99a6ad81a9a7f1f405.1623027729.git.huangy81@chinatelecom.cn> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Wrapped a couple of long lines
2021-05-13migration: Drop redundant query-migrate result @blockedMarkus Armbruster1-6/+0
Result @blocked is redundant. Unfortunately, we realized this too close to the release to risk dropping it, so we deprecated it instead, in commit e11ce6c06. Since it was deprecated from the start, we can delete it without the customary grace period. Do so. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210429140424.2802929-1-armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-04-20migration: Deprecate redundant query-migrate result @blockedMarkus Armbruster1-2/+7
Result @blocked is true when and only when result @blocked-reasons is present. It's always non-empty when present. @blocked is redundant. It was introduced in commit 3af8554bd0 "migration: Add blocker information", and has not been released. This gives us a chance to fix the interface with minimal fuss. Unfortunately, we're already too close to the release to risk dropping it. Deprecate it instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 20210420051907.891470-1-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-18migrate: remove QMP/HMP commands for speed, downtime and cache sizeDaniel P. Berrangé1-98/+0
The generic 'migrate_set_parameters' command handle all types of param. Only the QMP commands were documented in the deprecations page, but the rationale for deprecating applies equally to HMP, and the replacements exist. Furthermore the HMP commands are just shims to the QMP commands, so removing the latter breaks the former unless they get re-implemented. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-02-12migration: dirty-bitmap: Allow control of bitmap persistencePeter Krempa1-1/+18
Bitmap's source persistence is transported over the migration stream and the destination mirrors it. In some cases the destination might want to persist bitmaps which are not persistent on the source (e.g. the result of merging bitmaps from a number of layers on the source when migrating into a squashed image) but currently it would need to create another set of persistent bitmaps and merge them. This patch adds a 'transform' property to the alias map which allows overriding the persistence of migrated bitmaps both on the source and destination sides. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Message-Id: <b20afb675917b86f6359ac3591166ac6d4233573.1613150869.git.pkrempa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: grammar tweaks, drop dead conditional] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-08migration: introduce snapshot-{save, load, delete} QMP commandsDaniel P. Berrangé1-0/+173
savevm, loadvm and delvm are some of the few HMP commands that have never been converted to use QMP. The reasons for the lack of conversion are that they blocked execution of the event thread, and the semantics around choice of disks were ill-defined. Despite this downside, however, libvirt and applications using libvirt have used these commands for as long as QMP has existed, via the "human-monitor-command" passthrough command. IOW, while it is clearly desirable to be able to fix the problems, they are not a blocker to all real world usage. Meanwhile there is a need for other features which involve adding new parameters to the commands. This is possible with HMP passthrough, but it provides no reliable way for apps to introspect features, so using QAPI modelling is highly desirable. This patch thus introduces new snapshot-{load,save,delete} commands to QMP that are intended to replace the old HMP counterparts. The new commands are given different names, because they will be using the new QEMU job framework and thus will have diverging behaviour from the HMP originals. It would thus be misleading to keep the same name. While this design uses the generic job framework, the current impl is still blocking. The intention that the blocking problem is fixed later. None the less applications using these new commands should assume that they are asynchronous and thus wait for the job status change event to indicate completion. In addition to using the job framework, the new commands require the caller to be explicit about all the block device nodes used in the snapshot operations, with no built-in default heuristics in use. Note that the existing "query-named-block-nodes" can be used to query what snapshots currently exist for block nodes. Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210204124834.774401-13-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: removed tests for now, the output ordering isn't deterministic
2021-02-08migration: Add blocker informationDr. David Alan Gilbert1-0/+6
Modify query-migrate so that it has a flag indicating if outbound migration is blocked, and if it is a list of reasons. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20210202135522.127380-2-dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08migration: Clean up signed vs. unsigned XBZRLE cache-sizeMarkus Armbruster1-2/+2
73af8dd8d7 "migration: Make xbzrle_cache_size a migration parameter" (v2.11.0) made the new parameter unsigned (QAPI type 'size', uint64_t in C). It neglected to update existing code, which continues to use int64_t. migrate_xbzrle_cache_size() returns the new parameter. Adjust its return type. QMP query-migrate-cache-size returns migrate_xbzrle_cache_size(). Adjust its return type. migrate-set-parameters passes the new parameter to xbzrle_cache_resize(). Adjust its parameter type. xbzrle_cache_resize() passes it on to cache_init(). Adjust its parameter type. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20210202141734.2488076-3-armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08migration: Fix migrate-set-parameters argument validationMarkus Armbruster1-14/+14
Commit 741d4086c8 "migration: Use proper types in json" (v2.12.0) switched MigrationParameters to narrower integer types, and removed the simplified qmp_migrate_set_parameters()'s argument checking accordingly. Good idea, except qmp_migrate_set_parameters() takes MigrateSetParameters, not MigrationParameters. Its job is updating migrate_get_current()->parameters (which *is* of type MigrationParameters) according to its argument. The integers now get truncated silently. Reproducer: ---> {'execute': 'query-migrate-parameters'} <--- {"return": {[...] "compress-threads": 8, [...]}} ---> {"execute": "migrate-set-parameters", "arguments": {"compress-threads": 257}} <--- {"return": {}} ---> {'execute': 'query-migrate-parameters'} <--- {"return": {[...] "compress-threads": 1, [...]}} Fix by resynchronizing MigrateSetParameters with MigrationParameters. Fixes: 741d4086c856320807a2575389d7c0505578270b Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20210202141734.2488076-2-armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08migration: introduce 'background-snapshot' migration capabilityAndrey Gruzdev1-1/+6
Add new capability to 'qapi/migration.json' schema. Update migrate_caps_check() to validate enabled capability set against introduced one. Perform checks for required kernel features and compatibility with guest memory backends. Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210129101407.103458-2-andrey.gruzdev@virtuozzo.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-10qapi: Normalize version references x.y.0 to just x.yMarkus Armbruster1-8/+8
We use x.y most of the time, and x.y.0 sometimes. Normalize for consistency. Reported-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201118064158.3359056-1-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2020-11-01qapi: Add VFIO devices migration stats in Migration statsKirti Wankhede1-0/+17
Added amount of bytes transferred to the VM at destination by all VFIO devices Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-21qapi: Restrict Xen migration commands to migration.jsonPhilippe Mathieu-Daudé1-0/+41
Restricting xen-set-global-dirty-log and xen-load-devices-state commands migration.json pulls slightly less QAPI-generated code into user-mode and tools. Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201012121536.3381997-6-philmd@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-12migration/dirtyrate: present dirty rate only when querying the rate has ↵Chuan Zheng1-5/+3
completed Make dirty_rate field optional, present dirty rate only when querying the rate has completed. The qmp results is shown as follow: @unstarted: {"return":{"status":"unstarted","start-time":0,"calc-time":0},"id":"libvirt-12"} @measuring: {"return":{"status":"measuring","start-time":102931,"calc-time":1},"id":"libvirt-85"} @measured: {"return":{"status":"measured","dirty-rate":4,"start-time":150146,"calc-time":1},"id":"libvirt-15"} Signed-off-by: Chuan Zheng <zhengchuan@huawei.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Message-Id: <1601350938-128320-3-git-send-email-zhengchuan@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-09-29qapi: Fix doc comment indentation againPeter Maydell1-54/+54
In commit 26ec4e53f2 and similar commits we fixed the indentation for doc comments in our qapi json files to follow a new stricter standard for indentation, which permits only: @arg: description line 1 description line 2 or: @arg: line 1 line 2 but because the script updates that enforce this are not yet in the tree we have had a steady trickle of subsequent changes which didn't follow the new rules. Fix the latest round of mis-indented doc comments. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-2-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Updated for commit 4c437254b807 and a83e24ba1a5] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-25migration/dirtyrate: Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() ↵Chuan Zheng1-0/+50
function Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function which could be called Signed-off-by: Chuan Zheng <zhengchuan@huawei.com> Message-Id: <1600237327-33618-12-git-send-email-zhengchuan@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> atomic function fixup Wording fixup in migration.json based on Eric's review
2020-09-25migration/dirtyrate: add DirtyRateStatus to denote calculation statusChuan Zheng1-0/+17
add DirtyRateStatus to denote calculating status. Signed-off-by: Chuan Zheng <zhengchuan@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Message-Id: <1600237327-33618-3-git-send-email-zhengchuan@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> atomic name fixup
2020-09-07qapi: Fix indentation, againPeter Maydell1-4/+4
In commit 26ec4e53f2 and similar commits we fixed the indentation for doc comments in our qapi json files to follow a new stricter standard for indentation, which permits only: @arg: description line 1 description line 2 or: @arg: line 1 line 2 Unfortunately since we didn't manage to get the script changes that enforced the new style in, a variety of commits (eg df4097aeaf71, 2e4457032105) introduced new doc text which doesn't follow the new stricter rules for indentation on multi-line doc comments. Bring those into line with the new rules. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200810195019.25427-3-peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-07qapi/migration.json: Fix indentationPeter Maydell1-30/+30
Commits 6a9ad1542065ca0bd54c6 and 9004db48c080632aef23 added some new text to qapi/migration.json which doesn't fit the stricter indentation requirements imposed by the rST documentation generator. Reindent those lines to the new standard. Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200810195019.25427-2-peter.maydell@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-08-21migration: Add block-bitmap-mapping parameterMax Reitz1-3/+101
This migration parameter allows mapping block node names and bitmap names to aliases for the purpose of block dirty bitmap migration. This way, management tools can use different node and bitmap names on the source and destination and pass the mapping of how bitmaps are to be transferred to qemu (on the source, the destination, or even both with arbitrary aliases in the migration stream). While touching this code, fix a bug where bitmap names longer than 255 bytes would fail an assertion in qemu_put_counted_string(). Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200820150725.68687-2-mreitz@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2020-08-03schemas: Add vim modelineAndrea Bolognani1-0/+1
The various schemas included in QEMU use a JSON-based format which is, however, strictly speaking not valid JSON. As a consequence, when vim tries to apply syntax highlight rules for JSON (as guessed from the file name), the result is an unreadable mess which mostly consist of red markers pointing out supposed errors in, well, pretty much everything. Using Python syntax highlighting produces much better results, and in fact these files already start with specially-formatted comments that instruct Emacs to process them as if they were Python files. This commit adds the equivalent special comments for vim. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Message-Id: <20200729185024.121766-1-abologna@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-05-07migration/xbzrle: add encoding rateWei Wang1-1/+4
Users may need to check the xbzrle encoding rate to know if the guest memory is xbzrle encoding-friendly, and dynamically turn off the encoding if the encoding rate is low. Signed-off-by: Yi Sun <yi.y.sun@intel.com> Signed-off-by: Wei Wang <wei.w.wang@intel.com> Message-Id: <1588208375-19556-1-git-send-email-wei.w.wang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07migration/throttle: Add cpu-throttle-tailslow migration parameterKeqian Zhu1-0/+48
At the tail stage of throttling, the Guest is very sensitive to CPU percentage while the @cpu-throttle-increment is excessive usually at tail stage. If this parameter is true, we will compute the ideal CPU percentage used by the Guest, which may exactly make the dirty rate match the dirty rate threshold. Then we will choose a smaller throttle increment between the one specified by @cpu-throttle-increment and the one generated by ideal CPU percentage. Therefore, it is compatible to traditional throttling, meanwhile the throttle increment won't be excessive at tail stage. This may make migration time longer, and is disabled by default. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Message-Id: <20200413101508.54793-1-zhukeqian1@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-17qapi: Mark deprecated QMP parts with feature 'deprecated'Markus Armbruster1-12/+24
Add feature 'deprecated' to the deprecated QMP commands, so their deprecation becomes visible in output of query-qmp-schema. Looks like this: {"name": "query-cpus", "ret-type": "[164]", "meta-type": "command", "arg-type": "0", ---> "features": ["deprecated"]} Management applications could conceivably use this for static checking. The deprecated commands are change, cpu-add, migrate-set-cache-size, migrate_set_downtime, migrate_set_speed, query-cpus, query-events, query-migrate-cache-size. The deprecated command arguments are block-commit arguments @base and @top, and block_set_io_throttle, blockdev-change-medium, blockdev-close-tray, blockdev-open-tray, eject argument @device. The deprecated command results are query-cpus-fast result @arch, query-block result @dirty-bitmaps, query-named-block-nodes result @encryption_key_missing and result @dirty-bitmaps's member @status. Same for query-block result @inserted, which mirrors query-named-block-nodes. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200317115459.31821-27-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2020-03-13migration/throttle: Add throttle-trig-thres migration parameterKeqian Zhu1-1/+15
Currently, if the bytes_dirty_period is more than the 50% of bytes_xfer_period, we start or increase throttling. If we make this percentage higher, then we can tolerate higher dirty rate during migration, which means less impact on guest. The side effect of higher percentage is longer migration time. We can make this parameter configurable to switch between mig- ration time first or guest performance first. The default value is 50 and valid range is 1 to 100. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Message-Id: <20200224023142.39360-1-zhukeqian1@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28multifd: Add zstd compression multifd supportJuan Quintela1-1/+3
Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28multifd: Add multifd-zstd-level parameterJuan Quintela1-3/+26
This parameter specifies the zstd compression level. The next patch will put it to use. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com>