aboutsummaryrefslogtreecommitdiff
path: root/qapi/migration.json
AgeCommit message (Collapse)AuthorFilesLines
2021-02-12migration: dirty-bitmap: Allow control of bitmap persistencePeter Krempa1-1/+18
Bitmap's source persistence is transported over the migration stream and the destination mirrors it. In some cases the destination might want to persist bitmaps which are not persistent on the source (e.g. the result of merging bitmaps from a number of layers on the source when migrating into a squashed image) but currently it would need to create another set of persistent bitmaps and merge them. This patch adds a 'transform' property to the alias map which allows overriding the persistence of migrated bitmaps both on the source and destination sides. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Message-Id: <b20afb675917b86f6359ac3591166ac6d4233573.1613150869.git.pkrempa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: grammar tweaks, drop dead conditional] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-08migration: introduce snapshot-{save, load, delete} QMP commandsDaniel P. Berrangé1-0/+173
savevm, loadvm and delvm are some of the few HMP commands that have never been converted to use QMP. The reasons for the lack of conversion are that they blocked execution of the event thread, and the semantics around choice of disks were ill-defined. Despite this downside, however, libvirt and applications using libvirt have used these commands for as long as QMP has existed, via the "human-monitor-command" passthrough command. IOW, while it is clearly desirable to be able to fix the problems, they are not a blocker to all real world usage. Meanwhile there is a need for other features which involve adding new parameters to the commands. This is possible with HMP passthrough, but it provides no reliable way for apps to introspect features, so using QAPI modelling is highly desirable. This patch thus introduces new snapshot-{load,save,delete} commands to QMP that are intended to replace the old HMP counterparts. The new commands are given different names, because they will be using the new QEMU job framework and thus will have diverging behaviour from the HMP originals. It would thus be misleading to keep the same name. While this design uses the generic job framework, the current impl is still blocking. The intention that the blocking problem is fixed later. None the less applications using these new commands should assume that they are asynchronous and thus wait for the job status change event to indicate completion. In addition to using the job framework, the new commands require the caller to be explicit about all the block device nodes used in the snapshot operations, with no built-in default heuristics in use. Note that the existing "query-named-block-nodes" can be used to query what snapshots currently exist for block nodes. Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210204124834.774401-13-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: removed tests for now, the output ordering isn't deterministic
2021-02-08migration: Add blocker informationDr. David Alan Gilbert1-0/+6
Modify query-migrate so that it has a flag indicating if outbound migration is blocked, and if it is a list of reasons. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20210202135522.127380-2-dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08migration: Clean up signed vs. unsigned XBZRLE cache-sizeMarkus Armbruster1-2/+2
73af8dd8d7 "migration: Make xbzrle_cache_size a migration parameter" (v2.11.0) made the new parameter unsigned (QAPI type 'size', uint64_t in C). It neglected to update existing code, which continues to use int64_t. migrate_xbzrle_cache_size() returns the new parameter. Adjust its return type. QMP query-migrate-cache-size returns migrate_xbzrle_cache_size(). Adjust its return type. migrate-set-parameters passes the new parameter to xbzrle_cache_resize(). Adjust its parameter type. xbzrle_cache_resize() passes it on to cache_init(). Adjust its parameter type. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20210202141734.2488076-3-armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08migration: Fix migrate-set-parameters argument validationMarkus Armbruster1-14/+14
Commit 741d4086c8 "migration: Use proper types in json" (v2.12.0) switched MigrationParameters to narrower integer types, and removed the simplified qmp_migrate_set_parameters()'s argument checking accordingly. Good idea, except qmp_migrate_set_parameters() takes MigrateSetParameters, not MigrationParameters. Its job is updating migrate_get_current()->parameters (which *is* of type MigrationParameters) according to its argument. The integers now get truncated silently. Reproducer: ---> {'execute': 'query-migrate-parameters'} <--- {"return": {[...] "compress-threads": 8, [...]}} ---> {"execute": "migrate-set-parameters", "arguments": {"compress-threads": 257}} <--- {"return": {}} ---> {'execute': 'query-migrate-parameters'} <--- {"return": {[...] "compress-threads": 1, [...]}} Fix by resynchronizing MigrateSetParameters with MigrationParameters. Fixes: 741d4086c856320807a2575389d7c0505578270b Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20210202141734.2488076-2-armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08migration: introduce 'background-snapshot' migration capabilityAndrey Gruzdev1-1/+6
Add new capability to 'qapi/migration.json' schema. Update migrate_caps_check() to validate enabled capability set against introduced one. Perform checks for required kernel features and compatibility with guest memory backends. Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210129101407.103458-2-andrey.gruzdev@virtuozzo.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-10qapi: Normalize version references x.y.0 to just x.yMarkus Armbruster1-8/+8
We use x.y most of the time, and x.y.0 sometimes. Normalize for consistency. Reported-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201118064158.3359056-1-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2020-11-01qapi: Add VFIO devices migration stats in Migration statsKirti Wankhede1-0/+17
Added amount of bytes transferred to the VM at destination by all VFIO devices Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-21qapi: Restrict Xen migration commands to migration.jsonPhilippe Mathieu-Daudé1-0/+41
Restricting xen-set-global-dirty-log and xen-load-devices-state commands migration.json pulls slightly less QAPI-generated code into user-mode and tools. Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201012121536.3381997-6-philmd@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-12migration/dirtyrate: present dirty rate only when querying the rate has ↵Chuan Zheng1-5/+3
completed Make dirty_rate field optional, present dirty rate only when querying the rate has completed. The qmp results is shown as follow: @unstarted: {"return":{"status":"unstarted","start-time":0,"calc-time":0},"id":"libvirt-12"} @measuring: {"return":{"status":"measuring","start-time":102931,"calc-time":1},"id":"libvirt-85"} @measured: {"return":{"status":"measured","dirty-rate":4,"start-time":150146,"calc-time":1},"id":"libvirt-15"} Signed-off-by: Chuan Zheng <zhengchuan@huawei.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Message-Id: <1601350938-128320-3-git-send-email-zhengchuan@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-09-29qapi: Fix doc comment indentation againPeter Maydell1-54/+54
In commit 26ec4e53f2 and similar commits we fixed the indentation for doc comments in our qapi json files to follow a new stricter standard for indentation, which permits only: @arg: description line 1 description line 2 or: @arg: line 1 line 2 but because the script updates that enforce this are not yet in the tree we have had a steady trickle of subsequent changes which didn't follow the new rules. Fix the latest round of mis-indented doc comments. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200925162316.21205-2-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Updated for commit 4c437254b807 and a83e24ba1a5] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-25migration/dirtyrate: Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() ↵Chuan Zheng1-0/+50
function Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function which could be called Signed-off-by: Chuan Zheng <zhengchuan@huawei.com> Message-Id: <1600237327-33618-12-git-send-email-zhengchuan@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> atomic function fixup Wording fixup in migration.json based on Eric's review
2020-09-25migration/dirtyrate: add DirtyRateStatus to denote calculation statusChuan Zheng1-0/+17
add DirtyRateStatus to denote calculating status. Signed-off-by: Chuan Zheng <zhengchuan@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Message-Id: <1600237327-33618-3-git-send-email-zhengchuan@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> atomic name fixup
2020-09-07qapi: Fix indentation, againPeter Maydell1-4/+4
In commit 26ec4e53f2 and similar commits we fixed the indentation for doc comments in our qapi json files to follow a new stricter standard for indentation, which permits only: @arg: description line 1 description line 2 or: @arg: line 1 line 2 Unfortunately since we didn't manage to get the script changes that enforced the new style in, a variety of commits (eg df4097aeaf71, 2e4457032105) introduced new doc text which doesn't follow the new stricter rules for indentation on multi-line doc comments. Bring those into line with the new rules. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200810195019.25427-3-peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-07qapi/migration.json: Fix indentationPeter Maydell1-30/+30
Commits 6a9ad1542065ca0bd54c6 and 9004db48c080632aef23 added some new text to qapi/migration.json which doesn't fit the stricter indentation requirements imposed by the rST documentation generator. Reindent those lines to the new standard. Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200810195019.25427-2-peter.maydell@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-08-21migration: Add block-bitmap-mapping parameterMax Reitz1-3/+101
This migration parameter allows mapping block node names and bitmap names to aliases for the purpose of block dirty bitmap migration. This way, management tools can use different node and bitmap names on the source and destination and pass the mapping of how bitmaps are to be transferred to qemu (on the source, the destination, or even both with arbitrary aliases in the migration stream). While touching this code, fix a bug where bitmap names longer than 255 bytes would fail an assertion in qemu_put_counted_string(). Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200820150725.68687-2-mreitz@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2020-08-03schemas: Add vim modelineAndrea Bolognani1-0/+1
The various schemas included in QEMU use a JSON-based format which is, however, strictly speaking not valid JSON. As a consequence, when vim tries to apply syntax highlight rules for JSON (as guessed from the file name), the result is an unreadable mess which mostly consist of red markers pointing out supposed errors in, well, pretty much everything. Using Python syntax highlighting produces much better results, and in fact these files already start with specially-formatted comments that instruct Emacs to process them as if they were Python files. This commit adds the equivalent special comments for vim. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Message-Id: <20200729185024.121766-1-abologna@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-05-07migration/xbzrle: add encoding rateWei Wang1-1/+4
Users may need to check the xbzrle encoding rate to know if the guest memory is xbzrle encoding-friendly, and dynamically turn off the encoding if the encoding rate is low. Signed-off-by: Yi Sun <yi.y.sun@intel.com> Signed-off-by: Wei Wang <wei.w.wang@intel.com> Message-Id: <1588208375-19556-1-git-send-email-wei.w.wang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07migration/throttle: Add cpu-throttle-tailslow migration parameterKeqian Zhu1-0/+48
At the tail stage of throttling, the Guest is very sensitive to CPU percentage while the @cpu-throttle-increment is excessive usually at tail stage. If this parameter is true, we will compute the ideal CPU percentage used by the Guest, which may exactly make the dirty rate match the dirty rate threshold. Then we will choose a smaller throttle increment between the one specified by @cpu-throttle-increment and the one generated by ideal CPU percentage. Therefore, it is compatible to traditional throttling, meanwhile the throttle increment won't be excessive at tail stage. This may make migration time longer, and is disabled by default. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Message-Id: <20200413101508.54793-1-zhukeqian1@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-17qapi: Mark deprecated QMP parts with feature 'deprecated'Markus Armbruster1-12/+24
Add feature 'deprecated' to the deprecated QMP commands, so their deprecation becomes visible in output of query-qmp-schema. Looks like this: {"name": "query-cpus", "ret-type": "[164]", "meta-type": "command", "arg-type": "0", ---> "features": ["deprecated"]} Management applications could conceivably use this for static checking. The deprecated commands are change, cpu-add, migrate-set-cache-size, migrate_set_downtime, migrate_set_speed, query-cpus, query-events, query-migrate-cache-size. The deprecated command arguments are block-commit arguments @base and @top, and block_set_io_throttle, blockdev-change-medium, blockdev-close-tray, blockdev-open-tray, eject argument @device. The deprecated command results are query-cpus-fast result @arch, query-block result @dirty-bitmaps, query-named-block-nodes result @encryption_key_missing and result @dirty-bitmaps's member @status. Same for query-block result @inserted, which mirrors query-named-block-nodes. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200317115459.31821-27-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2020-03-13migration/throttle: Add throttle-trig-thres migration parameterKeqian Zhu1-1/+15
Currently, if the bytes_dirty_period is more than the 50% of bytes_xfer_period, we start or increase throttling. If we make this percentage higher, then we can tolerate higher dirty rate during migration, which means less impact on guest. The side effect of higher percentage is longer migration time. We can make this parameter configurable to switch between mig- ration time first or guest performance first. The default value is 50 and valid range is 1 to 100. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Message-Id: <20200224023142.39360-1-zhukeqian1@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28multifd: Add zstd compression multifd supportJuan Quintela1-1/+3
Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28multifd: Add multifd-zstd-level parameterJuan Quintela1-3/+26
This parameter specifies the zstd compression level. The next patch will put it to use. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com>
2020-02-28multifd: Add zlib compression multifd supportJuan Quintela1-1/+2
Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28multifd: Add multifd-zlib-level parameterJuan Quintela1-3/+27
This parameter specifies the zlib compression level. The next patch will put it to use. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28multifd: Add multifd-compression parameterJuan Quintela1-3/+27
This will store the compression method to use. We start with none. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> --- Rename multifd-method to multifd-compression
2020-02-15qapi/migration.json: Replace _this_ with *this*Peter Maydell1-2/+2
The MigrationInfo::setup-time documentation is the only place where we use _this_ inline markup for emphasis, commonly rendered in italics. We would like to switch the doc comments to rST format, but rST doesn't recognize that markup and emits literal underscores. Switch to *this* instead. Changes markup to strong emphasis with Texinfo, commonly rendered as bold. With rST, it will go right back to emphasis / italics. rST also uses **this** for strong (commonly rendered bold) where Texinfo uses *this*. We have one place in the doc comments which uses strong/bold markup, in qapi/introspect.json: Note: the QAPI schema is also used to help define *internal* When we switch to rST that will be rendered as emphasis / italics. Markus (who wrote that) thinks that using emphasis / italics there is an improvement, so we leave that markup alone. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200213175647.17628-18-peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15qapi: Remove hardcoded tabsPeter Maydell1-3/+3
There are some stray hardcoded tabs in some of our json files; remove them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200213175647.17628-11-peter.maydell@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-15qapi: Fix indent level on doc comments in json filesPeter Maydell1-99/+99
The current doc generation doesn't care much about indentation levels, but we would like to switch to an rST format, and rST does care about indentation. Make the doc comments more strongly consistent about indentation for multiline constructs like: @arg: description line 1 description line 2 Returns: line one line 2 so that there is always exactly one space after the colon, and subsequent lines align with the first. This commit is a purely whitespace change, and it does not alter the generated .texi files (because the texi generation code strips away all the extra whitespace). This does mean that we end up with some over-length lines. Note that when the documentation for an argument fits on a single line like this: @arg: one line only then stray extra spaces after the ':' don't affect the rST output, so I have not attempted to methodically fix them, though the preference is a single space here too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200213175647.17628-10-peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-10-29migration: add new migration state wait-unplugJens Freimann1-1/+4
This patch adds a new migration state called wait-unplug. It is entered after the SETUP state if failover devices are present. It will transition into ACTIVE once all devices were succesfully unplugged from the guest. So if a guest doesn't respond or takes long to honor the unplug request the user will see the migration state 'wait-unplug'. In the migration thread we query failover devices if they're are still pending the guest unplug. When all are unplugged the migration continues. If one device won't unplug migration will stay in wait_unplug state. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20191029114905.6856-9-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29qapi: add unplug primary eventJens Freimann1-0/+19
This event is emitted when we sent a request to unplug a failover primary device from the Guest OS and it includes the device id of the primary device. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-6-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com>
2019-09-12migration: Add validate-uuid capabilityYury Kotov1-1/+4
This capability realizes simple source validation by UUID. It's useful for live migration between hosts. Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Message-Id: <20190903162246.18524-2-yury-kotov@yandex-team.ru> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-04-02qapi/migration.json: Rename COLOStatus last_mode to last-modeZhang Chen1-2/+2
Signed-off-by: Zhang Chen <chen.zhang@intel.com> Message-Id: <20190402085521.17973-1-chen.zhang@intel.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message rephrased] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-04-02qapi/migration.json: Fix ColoStatus member last_mode's versionZhang Chen1-1/+1
Signed-off-by: Zhang Chen <chen.zhang@intel.com> Message-Id: <20190326174510.13303-1-chen.zhang@intel.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Commit message tweaked as per Eric's review] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-03-25Migration/colo.c: Make user obtain the last COLO mode info after failoverZhang Chen1-1/+6
Add the last_colo_mode to save the status after failover. This patch can solve the issue that user want to get last colo mode use query_colo_status after failover. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25Migration/colo.c: Add new COLOExitReason to handle all failover stateZhang Chen1-6/+9
In this patch we add the processing state for COLOExitReason, because we have to identify COLO in the failover processing state or failover error state. In the way, we can handle all the failover state. We have improved the description of the COLOExitReason by the way. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25migration: add support for a "tls-authz" migration parameterDaniel P. Berrange1-1/+13
The QEMU instance that runs as the server for the migration data transport (ie the target QEMU) needs to be able to configure access control so it can prevent unauthorized clients initiating an incoming migration. This adds a new 'tls-authz' migration parameter that is used to provide the QOM ID of a QAuthZ subclass instance that provides the access control check. This is checked against the x509 certificate obtained during the TLS handshake. For example, when starting a QEMU for incoming migration, it is possible to give an example identity of the source QEMU that is intended to be connecting later: $QEMU \ -monitor stdio \ -incoming defer \ ...other args... (qemu) object_add tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\ endpoint=server,verify-peer=yes \ (qemu) object_add authz-simple,id=auth0,identity=CN=laptop.example.com,,\ O=Example Org,,L=London,,ST=London,,C=GB \ (qemu) migrate_incoming tcp:localhost:9000 Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25multifd: Drop x-Juan Quintela1-17/+17
We make it supported from now on. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25multifd: Drop x-multifd-page-count parameterJuan Quintela1-12/+1
Libvirt don't want to expose (and explain it). From now on we measure the number of packages in bytes instead of pages, so it is the same independently of architecture. We choose the page size of x86. Notice that in the following patch we make this variable. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-06qapi/migration.json: Remove a variable that doesn't exist in exampleZhang Chen1-1/+1
Remove the "active" variable in example for query-colo-status. It is a doc bug from commit f56c0065 Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20190303145021.2962-6-chen.zhang@intel.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-06migration: Create socket-address parameterJuan Quintela1-1/+5
It will be used to store the uri parameters. We want this only for tcp, so we don't set it for other uris. We need it to know what port is migration running. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Removed DummyStruct as suggested by Eric & Markus --
2019-03-06migration: Introduce ignore-shared capabilityYury Kotov1-1/+4
We want to use local migration to update QEMU for running guests. In this case we don't need to migrate shared (file backed) RAM. So, add a capability to ignore such blocks during live migration. Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Message-Id: <20190215174548.2630-3-yury-kotov@yandex-team.ru> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-05migration: Add announce parametersDr. David Alan Gilbert1-3/+50
Add migration parameters that control RARP/GARP announcement timeouts. Based on earlier patches by myself and Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-01-23migration: introduce pages-per-secondXiao Guangrong1-1/+4
It introduces a new statistic, pages-per-second, as bandwidth or mbps is not enough to measure the performance of posting pages out as we have compression, xbzrle, which can significantly reduce the amount of the data size, instead, pages-per-second is the one we want Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com> Message-Id: <20190111063732.10484-2-xiaoguangrong@tencent.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> With typo's Eric spotted fixed
2018-12-14qapi: add conditions to REPLICATION type/commands on the schemaMarc-André Lureau1-4/+8
Add #if defined(CONFIG_REPLICATION) in generated code, and adjust the code accordingly. Made conditional: * xen-set-replication, query-xen-replication-status, xen-colo-do-checkpoint Before the patch, we first register the commands unconditionally in generated code (requires a stub), then conditionally unregister in qmp_unregister_commands_hack(). Afterwards, we register only when CONFIG_REPLICATION. The command fails exactly the same, with CommandNotFound. Improvement, because now query-qmp-schema is accurate, and we're one step closer to killing qmp_unregister_commands_hack(). * enum BlockdevDriver value "replication" in command blockdev-add * BlockdevOptions variant @replication and related structures. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20181213123724.4866-23-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-13qapi: break long lines at 'data' memberMarc-André Lureau1-1/+2
Let's break the line before 'data'. While at it, improve a bit indentation/spacing. (I removed some alignment which are not helping much readability and become quickly inconsistent) Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181208111606.8505-26-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-10-31qapi: Fix COLOStatus and query-colo-status since versionZhang Chen1-2/+2
This structure and command have missed qemu version 3.0, so fix it to since version 3.1. Signed-off-by: Zhang Chen <zhangckid@gmail.com> Message-Id: <20181022164118.5502-1-zhangckid@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-10-19qapi: Add new command to query colo statusZhang Chen1-0/+32
Libvirt or other high level software can use this command query colo status. You can test this command like that: {'execute':'query-colo-status'} Signed-off-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-10-19qapi/migration.json: Rename COLO unknown mode to none mode.Zhang Chen1-5/+5
Suggested by Markus Armbruster rename COLO unknown mode to none mode. Signed-off-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-10-19qmp event: Add COLO_EXIT event to notify users while exited COLOzhanghailiang1-0/+38
If some errors happen during VM's COLO FT stage, it's important to notify the users of this event. Together with 'x-colo-lost-heartbeat', Users can intervene in COLO's failover work immediately. If users don't want to get involved in COLO's failover verdict, it is still necessary to notify users that we exited COLO mode. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
generated by cgit v1.1 at 2024-12-30 20:33:10 +0000