aboutsummaryrefslogtreecommitdiff
path: root/qapi/migration.json
AgeCommit message (Collapse)AuthorFilesLines
2019-04-02qapi/migration.json: Rename COLOStatus last_mode to last-modeZhang Chen1-2/+2
Signed-off-by: Zhang Chen <chen.zhang@intel.com> Message-Id: <20190402085521.17973-1-chen.zhang@intel.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message rephrased] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-04-02qapi/migration.json: Fix ColoStatus member last_mode's versionZhang Chen1-1/+1
Signed-off-by: Zhang Chen <chen.zhang@intel.com> Message-Id: <20190326174510.13303-1-chen.zhang@intel.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Commit message tweaked as per Eric's review] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-03-25Migration/colo.c: Make user obtain the last COLO mode info after failoverZhang Chen1-1/+6
Add the last_colo_mode to save the status after failover. This patch can solve the issue that user want to get last colo mode use query_colo_status after failover. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25Migration/colo.c: Add new COLOExitReason to handle all failover stateZhang Chen1-6/+9
In this patch we add the processing state for COLOExitReason, because we have to identify COLO in the failover processing state or failover error state. In the way, we can handle all the failover state. We have improved the description of the COLOExitReason by the way. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25migration: add support for a "tls-authz" migration parameterDaniel P. Berrange1-1/+13
The QEMU instance that runs as the server for the migration data transport (ie the target QEMU) needs to be able to configure access control so it can prevent unauthorized clients initiating an incoming migration. This adds a new 'tls-authz' migration parameter that is used to provide the QOM ID of a QAuthZ subclass instance that provides the access control check. This is checked against the x509 certificate obtained during the TLS handshake. For example, when starting a QEMU for incoming migration, it is possible to give an example identity of the source QEMU that is intended to be connecting later: $QEMU \ -monitor stdio \ -incoming defer \ ...other args... (qemu) object_add tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\ endpoint=server,verify-peer=yes \ (qemu) object_add authz-simple,id=auth0,identity=CN=laptop.example.com,,\ O=Example Org,,L=London,,ST=London,,C=GB \ (qemu) migrate_incoming tcp:localhost:9000 Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25multifd: Drop x-Juan Quintela1-17/+17
We make it supported from now on. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-25multifd: Drop x-multifd-page-count parameterJuan Quintela1-12/+1
Libvirt don't want to expose (and explain it). From now on we measure the number of packages in bytes instead of pages, so it is the same independently of architecture. We choose the page size of x86. Notice that in the following patch we make this variable. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-03-06qapi/migration.json: Remove a variable that doesn't exist in exampleZhang Chen1-1/+1
Remove the "active" variable in example for query-colo-status. It is a doc bug from commit f56c0065 Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20190303145021.2962-6-chen.zhang@intel.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-06migration: Create socket-address parameterJuan Quintela1-1/+5
It will be used to store the uri parameters. We want this only for tcp, so we don't set it for other uris. We need it to know what port is migration running. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Removed DummyStruct as suggested by Eric & Markus --
2019-03-06migration: Introduce ignore-shared capabilityYury Kotov1-1/+4
We want to use local migration to update QEMU for running guests. In this case we don't need to migrate shared (file backed) RAM. So, add a capability to ignore such blocks during live migration. Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Message-Id: <20190215174548.2630-3-yury-kotov@yandex-team.ru> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-05migration: Add announce parametersDr. David Alan Gilbert1-3/+50
Add migration parameters that control RARP/GARP announcement timeouts. Based on earlier patches by myself and Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-01-23migration: introduce pages-per-secondXiao Guangrong1-1/+4
It introduces a new statistic, pages-per-second, as bandwidth or mbps is not enough to measure the performance of posting pages out as we have compression, xbzrle, which can significantly reduce the amount of the data size, instead, pages-per-second is the one we want Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com> Message-Id: <20190111063732.10484-2-xiaoguangrong@tencent.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> With typo's Eric spotted fixed
2018-12-14qapi: add conditions to REPLICATION type/commands on the schemaMarc-André Lureau1-4/+8
Add #if defined(CONFIG_REPLICATION) in generated code, and adjust the code accordingly. Made conditional: * xen-set-replication, query-xen-replication-status, xen-colo-do-checkpoint Before the patch, we first register the commands unconditionally in generated code (requires a stub), then conditionally unregister in qmp_unregister_commands_hack(). Afterwards, we register only when CONFIG_REPLICATION. The command fails exactly the same, with CommandNotFound. Improvement, because now query-qmp-schema is accurate, and we're one step closer to killing qmp_unregister_commands_hack(). * enum BlockdevDriver value "replication" in command blockdev-add * BlockdevOptions variant @replication and related structures. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20181213123724.4866-23-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-13qapi: break long lines at 'data' memberMarc-André Lureau1-1/+2
Let's break the line before 'data'. While at it, improve a bit indentation/spacing. (I removed some alignment which are not helping much readability and become quickly inconsistent) Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181208111606.8505-26-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-10-31qapi: Fix COLOStatus and query-colo-status since versionZhang Chen1-2/+2
This structure and command have missed qemu version 3.0, so fix it to since version 3.1. Signed-off-by: Zhang Chen <zhangckid@gmail.com> Message-Id: <20181022164118.5502-1-zhangckid@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-10-19qapi: Add new command to query colo statusZhang Chen1-0/+32
Libvirt or other high level software can use this command query colo status. You can test this command like that: {'execute':'query-colo-status'} Signed-off-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-10-19qapi/migration.json: Rename COLO unknown mode to none mode.Zhang Chen1-5/+5
Suggested by Markus Armbruster rename COLO unknown mode to none mode. Signed-off-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-10-19qmp event: Add COLO_EXIT event to notify users while exited COLOzhanghailiang1-0/+38
If some errors happen during VM's COLO FT stage, it's important to notify the users of this event. Together with 'x-colo-lost-heartbeat', Users can intervene in COLO's failover work immediately. If users don't want to get involved in COLO's failover verdict, it is still necessary to notify users that we exited COLO mode. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-09-26migration: show the statistics of compressionXiao Guangrong1-1/+25
Currently, it includes: pages: amount of pages compressed and transferred to the target VM busy: amount of count that no free thread to compress data busy-rate: rate of thread busy compressed-size: amount of bytes after compression compression-rate: rate of compressed size Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com> Message-Id: <20180906070101.27280-3-xiaoguangrong@tencent.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-08-22migration: do not wait for free threadXiao Guangrong1-0/+18
Instead of putting the main thread to sleep state to wait for free compression thread, we can directly post it out as normal page that reduces the latency and uses CPUs more efficiently A parameter, compress-wait-thread, is introduced, it can be enabled if the user really wants the old behavior Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-08-22migrate/cpu-throttle: Add max-cpu-throttle migration parameterLi Qiang1-3/+18
Currently, the default maximum CPU throttle for migration is 99(CPU_THROTTLE_PCT_MAX). This is too big and can make a remarkable performance effect for the guest. We see a lot of packets latency exceed 500ms when the CPU_THROTTLE_PCT_MAX reached. This patch set adds a new max-cpu-throttle parameter to limit the CPU throttle. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-08-22qapi/migration.json: fix the description for "query-migrate" outputjialina011-13/+12
In the return for command "query-migrate", time information like "total-time", "setup-time", "downtime", is not included in ram json-object. So fix the description in migration.json by unpacking those information from ram json-object. Signed-off-by: jialina01 <jialina01@baidu.com> Signed-off-by: chaiwen <chaiwen@baidu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-06-27migration: Create multifd_bytes ram_counterJuan Quintela1-1/+4
This will include how many bytes they are sent through multifd. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-15migration/postcopy: Add max-postcopy-bandwidth parameterDr. David Alan Gilbert1-3/+16
Limit the background transfer bandwidth during the postcopy phase to the value set on this new parameter. The default, 0, corresponds to the existing behaviour which is unlimited bandwidth. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20180613102642.23995-2-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-04migration: Don't activate block devices if using -SDr. David Alan Gilbert1-1/+5
Activating the block devices causes the locks to be taken on the backing file. If we're running with -S and the destination libvirt hasn't started the destination with 'cont', it's expecting the locks are still untaken. Don't activate the block devices if we're not going to autostart the VM; 'cont' already will do that anyway. This change is tied to the new migration capability 'late-block-activate' that defaults to off, keeping the old behaviour by default. bz: https://bugzilla.redhat.com/show_bug.cgi?id=1560854 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-05-29qapi: Change "since 2.13" annotations to "since 3.0"Peter Maydell1-8/+8
We're going to make the next release be 3.0, not 2.13; change the annotations in our json appropriately. Changes produced with sed -i -e 's/2\.13/3.0/g' qapi/*.json Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20180522104000.9044-2-peter.maydell@linaro.org
2018-05-15migration: Textual fixups for blocktimeDr. David Alan Gilbert1-4/+5
Blank lines and comments as suggested by Eric. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180427111502.9822-1-dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-05-15migration/qmp: add command migrate-pausePeter Xu1-0/+16
It pauses an ongoing migration. Currently it only supports postcopy. Note that this command will work on either side of the migration. Basically when we trigger this on one side, it'll interrupt the other side as well since the other side will get notified on the disconnect event. However, it's still possible that the other side is not notified, for example, when the network is totally broken, or due to some firewall configuration changes. In that case, we will also need to run the same command on the other side so both sides will go into the paused state. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180502104740.12123-24-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> --- s/2.12/2.13/
2018-05-15qmp/migration: new command migrate-recoverPeter Xu1-0/+20
The first allow-oob=true command. It's used on destination side when the postcopy migration is paused and ready for a recovery. After execution, a new migration channel will be established for postcopy to continue. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180502104740.12123-21-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> --- s/2.12/2.13/
2018-05-15migration: new state "postcopy-recover"Peter Xu1-1/+3
Introducing new migration state "postcopy-recover". If a migration procedure is paused and the connection is rebuilt afterward successfully, we'll switch the source VM state from "postcopy-paused" to the new state "postcopy-recover", then we'll do the resume logic in the migration thread (along with the return path thread). This patch only do the state switch on source side. Another following up patch will handle the state switching on destination side using the same status bit. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180502104740.12123-10-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> --- s/2.11/2.13/
2018-05-15qmp: hmp: add migrate "resume" optionPeter Xu1-1/+4
It will be used when we want to resume one paused migration. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180502104740.12123-8-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> --- s/2.12/2.13/
2018-05-15migration: new postcopy-pause statePeter Xu1-1/+4
Introducing a new state "postcopy-paused", which can be used when the postcopy migration is paused. It is targeted for postcopy network failure recovery. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180502104740.12123-3-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-04-25migration: add postcopy total blocktime into query-migrateAlexey Perevalov1-1/+10
Postcopy total blocktime is available on destination side only. But query-migrate was possible only for source. This patch adds ability to call query-migrate on destination. To be able to see postcopy blocktime, need to request postcopy-blocktime capability. The query-migrate command will show following sample result: {"return": "postcopy-vcpu-blocktime": [115, 100], "status": "completed", "postcopy-blocktime": 100 }} postcopy_vcpu_blocktime contains list, where the first item is the first vCPU in QEMU. This patch has a drawback, it combines states of incoming and outgoing migration. Ongoing migration state will overwrite incoming state. Looks like better to separate query-migrate for incoming and outgoing migration or add parameter to indicate type of migration. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <1521742647-25550-7-git-send-email-a.perevalov@samsung.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-04-25migration: introduce postcopy-blocktime capabilityAlexey Perevalov1-1/+5
Right now it could be used on destination side to enable vCPU blocktime calculation for postcopy live migration. vCPU blocktime - it's time since vCPU thread was put into interruptible sleep, till memory page was copied and thread awake. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <1521742647-25550-2-git-send-email-a.perevalov@samsung.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-03-13qapi: add dirty-bitmaps migration capabilityVladimir Sementsov-Ogievskiy1-1/+5
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 20180313180320.339796-7-vsementsov@virtuozzo.com
2018-02-14migration: improve documentation of postcopy-ramGreg Kurz1-4/+6
This capability must have the same value on both source and destination, otherwise migration fails (commit 875fcd013ab6 "migration: incoming postcopy advise sanity checks"). Let's write it down in various places where postcopy-ram is documented. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <151801810352.29167.4832480228518630626.stgit@bahia.lan> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-01-23migration: Revert postcopy-blocktime commit setPeter Maydell1-15/+2
This reverts commits ca6011c migration: add postcopy total blocktime into query-migrate 5f32dc8 migration: add blocktime calculation into migration-test 2f7dae9 migration: postcopy_blocktime documentation 3be98be migration: calculate vCPU blocktime on dst side 01a87f0 migration: add postcopy blocktime ctx into MigrationIncomingState 31bf06a migration: introduce postcopy-blocktime capability as they don't build on ppc32 due to trying to do atomic accesses on types that are larger than the host pointer type. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-15migration: add postcopy total blocktime into query-migrateAlexey Perevalov1-1/+10
Postcopy total blocktime is available on destination side only. But query-migrate was possible only for source. This patch adds ability to call query-migrate on destination. To be able to see postcopy blocktime, need to request postcopy-blocktime capability. The query-migrate command will show following sample result: {"return": "postcopy-vcpu-blocktime": [115, 100], "status": "completed", "postcopy-blocktime": 100 }} postcopy_vcpu_blocktime contains list, where the first item is the first vCPU in QEMU. This patch has a drawback, it combines states of incoming and outgoing migration. Ongoing migration state will overwrite incoming state. Looks like better to separate query-migrate for incoming and outgoing migration or add parameter to indicate type of migration. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: introduce postcopy-blocktime capabilityAlexey Perevalov1-1/+5
Right now it could be used on destination side to enable vCPU blocktime calculation for postcopy live migration. vCPU blocktime - it's time since vCPU thread was put into interruptible sleep, till memory page was copied and thread awake. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: Use proper types in jsonJuan Quintela1-10/+10
We use int for everything (int64_t), and then we check that value is between 0 and 255. Change it to the valid types. This change only happens for HMP. QMP always use bytes and similar. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-11-21migration, xen: Fix block image lock issue on live migrationAnthony PERARD1-1/+5
When doing a live migration of a Xen guest with libxl, the images for block devices are locked by the original QEMU process, and this prevent the QEMU at the destination to take the lock and the migration fail. >From QEMU point of view, once the RAM of a domain is migrated, there is two QMP commands, "stop" then "xen-save-devices-state", at which point a new QEMU is spawned at the destination. Release locks in "xen-save-devices-state" so the destination can takes them, if it's a live migration. This patch add the "live" parameter to "xen-save-devices-state" which default to true so older version of libxenlight can work with newer version of QEMU. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-29migration: Make xbzrle_cache_size a migration parameterJuan Quintela1-3/+23
Right now it is a variable in MigrationState instead of a MigrationParameter. The change allows to set it as the rest of the Migration parameters, from the command line, with query_migration_paramters, set_migrate_parameters, etc. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-23qapi: Fix grammar in x-multifd-page-count descriptionsJuan Quintela1-3/+3
Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: migrate-continueDr. David Alan Gilbert1-0/+17
A new qmp command allows the caller to continue from a given paused state. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: Add 'pre-switchover' and 'device' statusesDr. David Alan Gilbert1-1/+7
Add two statuses for use when the 'pause-before-switchover' capability is enabled. 'pre-switchover' is the state that we wait in for management to allow us to continue. 'device' is the state we enter while serialising the devices after management gives us the OK. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23migration: Add 'pause-before-switchover' capabilityDr. David Alan Gilbert1-1/+4
When 'pause-before-switchover' is enabled, the outgoing migration will pause before invalidating the block devices and serializing the device state. At this point the management layer gets the chance to clean up any device jobs or other device users before the migration completes. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-09-22migration: Create x-multifd-page-count parameterJuan Quintela1-3/+14
Indicates how many pages we are going to send in each batch to a multifd thread. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> -- Be consistent with defaults and documentation Use new DEFINE_PROP_* Rename x-multifd-group to x-multifd-page-count
2017-09-22migration: Create x-multifd-channels parameterJuan Quintela1-3/+21
Indicates the number of channels that we will create. By default we create 2 channels. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> -- Catch inconsistent defaults (eric). Improve comment stating that number of threads is the same than number of sockets Use new DEFIN_PROP_* Rename x-multifd-threads to x-multifd-threads
2017-09-22migration: Add multifd capabilityJuan Quintela1-1/+3
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> -- Use new DEFINE_PROP
2017-09-04qapi-schema: Collect migration stuff in qapi/migration.jsonMarkus Armbruster1-0/+1085
Cc: Juan Quintela <quintela@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-10-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>