aboutsummaryrefslogtreecommitdiff
path: root/qapi-schema.json
AgeCommit message (Collapse)AuthorFilesLines
2017-09-19s390x: implement query-hotpluggable-cpusDavid Hildenbrand1-0/+16
CPU hotplug is only possible on a per core basis on s390x. So let's add possible_cpus and wire everything up properly. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-19-david@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-14qmp: introduce query-memory-size-summary commandVadim Galitsyn1-0/+32
Add a new query-memory-size-summary command which provides the following memory information in bytes: * base-memory - size of "base" memory specified with command line option -m. * plugged-memory - amount of memory that was hot-plugged. If target does not have CONFIG_MEM_HOTPLUG enabled, no value is reported. Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com> Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com> Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com> Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: qemu-devel@nongnu.org Message-Id: <20170829153022.27004-3-vadim.galitsyn@profitbricks.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixup comments as per Igor's review Added 'of' from Vadim's reply
2017-09-04qapi-schema: Improve section headingsMarkus Armbruster1-1/+1
The generated QEMU QMP reference is now structured as follows: 1.1 Introduction 1.2 Stability Considerations 1.3 Common data types 1.4 Socket data types 1.5 VM run state 1.6 Cryptography 1.7 Block devices 1.7.1 Block core (VM unrelated) 1.7.2 QAPI block definitions (vm unrelated) 1.8 Character devices 1.9 Net devices 1.10 Rocker switch device 1.11 TPM (trusted platform module) devices 1.12 Remote desktop 1.12.1 Spice 1.12.2 VNC 1.13 Input 1.14 Migration 1.15 Transactions 1.16 Tracing 1.17 QMP introspection 1.18 Miscellanea Section "1.18 Miscellanea" is still too big: it documents 134 symbols. Section "1.7.1 Block core (VM unrelated)" is also rather big: 128 symbols. All the others are of reasonable size. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-17-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi-schema: Move queries from common.json to qapi-schema.jsonMarkus Armbruster1-0/+103
query-version and query-commands are in common.json for no good reason. Several similar queries are in qapi-schema.json. Move them there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-16-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi-schema: Make block-core.json self-containedMarkus Armbruster1-14/+0
Except for block-core.json, the sub-schemas are self-contained: if they use a symbol defined in another sub-schema, they include that sub-schema. To check, feed the sub-schema to qapi2texi (or any other QAPI generator) along with the pragma from qapi-schema.json. Fix up things to make block-core.json self-contained, too. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-15-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi-schema: Fold event.json back into qapi-schema.jsonMarkus Armbruster1-1/+133
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-14-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi-schema: Collect TPM stuff in qapi/tpm.jsonMarkus Armbruster1-131/+1
Sadly, we don't have a TPM maintainer, not even a MAINTAINERS entry. Create one, and mark it orphaned. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-12-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi-schema: Collect transaction stuff in qapi/transaction.jsonMarkus Armbruster1-150/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-11-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi-schema: Collect migration stuff in qapi/migration.jsonMarkus Armbruster1-1055/+1
Cc: Juan Quintela <quintela@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-10-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-04qapi-schema: Collect UI stuff in qapi/ui.jsonMarkus Armbruster1-783/+1
UI stuff is remote desktop stuff (Spice, VNC) and input stuff (mouse, keyboard). Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-9-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-09-04qapi-schema: Collect net device stuff in qapi/net.jsonMarkus Armbruster1-674/+1
Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-8-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi-schema: Collect char device stuff in qapi/char.jsonMarkus Armbruster1-510/+1
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-7-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi-schema: Collect run state stuff in qapi/run-state.jsonMarkus Armbruster1-164/+1
Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-6-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi-schema: Collect sockets stuff in qapi/sockets.jsonMarkus Armbruster1-151/+1
Cc: "Daniel P. Berrange" <berrange@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503602048-12268-5-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04qapi-schema: Rocker doc section contains unrelated stuff, fixMarkus Armbruster1-3/+1
Bug: section "Rocker switch device" starts with the rocker stuff, but then has unrelated stuff, like ReplayMode, xen-load-devices-state, ... Cause: rocker.json is included in the middle of section "QMP commands". Fix: include it in a sane place, namely next to the other sub-schemas. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1503602048-12268-4-git-send-email-armbru@redhat.com>
2017-09-04qapi-schema: Document how generated documentation is orderedMarkus Armbruster1-11/+6
Documentation generated with qapi2texi.py is in source order, with included sub-schemas inserted at the first include directive (subsequent include directives have no effect). To get a sane and stable order, it's best to include each sub-schema just once, or include it first in qapi-schema.json. Document that. While there, drop a few redundant comments. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1503602048-12268-2-git-send-email-armbru@redhat.com>
2017-07-31docs: fix broken paths to docs/interop dirCleber Rosa1-2/+2
With the move of some docs to docs/interop on d59157e, a couple of references were not updated. Signed-off-by: Cleber Rosa <crosa@redhat.com> [PMD: fixed a typo and another reference of docs/interop/qmp-spec.txt] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-28ui: drop ac_search and ac_stopGerd Hoffmann1-4/+1
Both keys exist already: "ac_search" is "find" and "ac_stop" is "stop". Fixes: 37810e80553c19f0dac3644924895a9bf5c70785 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170728063415.27480-1-kraxel@redhat.com
2017-07-27ui: drop altgr and altgr_r QKeyCodesGerd Hoffmann1-1/+2
The right alt key (alt_r aka KEY_RIGHTALT) is used for AltGr. The altgr and altgr_r keys simply don't exist. Drop them. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170727104720.30061-1-kraxel@redhat.com
2017-07-27ui: add multimedia keysGerd Hoffmann1-1/+27
Add multimedia keys to QKeyCodes and to the keymaps. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170726152918.11995-5-kraxel@redhat.com
2017-07-24migration: Use JSON null instead of "" to reset parameter to defaultMarkus Armbruster1-2/+18
migrate-set-parameters sets migration parameters according to is arguments like this: * Present means "set the parameter to this value" * Absent means "leave the parameter unchanged" * Except for parameters tls_creds and tls_hostname, "" means "reset the parameter to its default value The first two are perfectly normal: presence of the parameter makes the command do something. The third one overloads the parameter with a second meaning. The overloading is *implicit*, i.e. it's not visible in the types. Works here, because "" is neither a valid TLS credentials ID, nor a valid host name. Pressing argument values the schema accepts, but are semantically invalid, into service to mean "reset to default" is not general, as suitable invalid values need not exist. I also find it ugly. To clean this up, we could add a separate flag argument to ask for "reset to default", or add a distinct value to @tls_creds and @tls_hostname. This commit implements the latter: add JSON null to the values of @tls_creds and @tls_hostname, deprecate "". Because we're so close to the 2.10 freeze, implement it in the stupidest way possible: have qmp_migrate_set_parameters() rewrite null to "" before anything else can see the null. The proper way to do it would be rewriting "" to null, but that requires fixing up code to work with null. Add TODO comments for that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-07-24migration: Unshare MigrationParameters struct for nowMarkus Armbruster1-8/+77
Commit de63ab6 "migrate: Share common MigrationParameters struct" reused MigrationParameters for the arguments of migrate-set-parameters, with the following rationale: It is rather verbose, and slightly error-prone, to repeat the same set of parameters for input (migrate-set-parameters) as for output (query-migrate-parameters), where the only difference is whether the members are optional. We can just document that the optional members will always be present on output, and then share a common struct between both commands. The next patch can then reduce the amount of code needed on input. I need to unshare them to correct a design flaw in a stupid, but minimally invasive way, in the next commit. We can restore the sharing when we redo that patch in a less stupid way. Add a suitable TODO comment. Note that I revert only the sharing part of commit de63ab6, not the part that made the members of query-migrate-parameters' result optional. The schema (and thus introspection) remains inaccurate for query-migrate-parameters. If we decide not to restore the sharing, we should revert that part, too. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-07-24migration: Clean up around tls_creds, tls_hostnameMarkus Armbruster1-6/+5
Optional MigrationParameters members tls_creds and tls_hostname can't actually be absent outside qmp_migrate_set_parameters() since commit 4af245d (v2.9.0). Note that commit 4af245d reverted the part of commit de63ab6 (v2.8.0) that made tls_creds and tls_hostname absent instead of "" in the value of query-migrate-parameters, even though commit de63ab6 called that a mistake. What a mess. Drop the redundant tests for presence, and update documentation. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-20vnc: Clarify documentation of QMP command changeMarkus Armbruster1-2/+1
QMP command { "execute": "change", "arguments": { "device": "vnc", "target": "password", "arg": PWD } } behaves just like { "execute": "change-vnc-password", "arguments": { "password", "arg": PWD } } Their documentation differs, however. According to change-vnc-password's documentation, "an empty password [...] will set the password to the empty string", while change's documentation claims "no future logins will be allowed". The former is actually correct. Replace the incorrect claim by a reference to change-vnc-password. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 1500448182-21376-1-git-send-email-armbru@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-07-17qmp: Include parent type on 'qom-list-types' outputEduardo Habkost1-1/+3
Include name of parent type of each type on 'qom-list-types' output. Without this, there's no way to figure out the parents of a given type without making additional 'qom-list-types' queries. In addition to the test case for the new feature, update the abstract-interface test case to use the new field and avoid the "qom-list-types implements=object" trick. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170707122215.8819-4-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-07-17qmp: Include 'abstract' field on 'qom-list-types' outputEduardo Habkost1-1/+4
A client may be interested in getting the list of both abstract and non-abstract types. Instead of requiring them to make multiple queries with different filter arguments, just return an 'abstract' field in 'qom-list-types'. In addition to the new test code for validating this field, update the abstract-interfaces test case to query for all 'interface' subtypes (including abstract ones), and to look at the 'abstract' field directly. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170707122215.8819-3-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-07-14char: chardevice hotswapAnton Nefedov1-0/+40
This patch adds a possibility to change a char device without a frontend removal. Ideally, it would have to happen transparently to a frontend, i.e. frontend would continue its regular operation. However, backends are not stateless and are set up by the frontends via qemu_chr_fe_<> functions, and it's not (generally) possible to replay that setup entirely in a backend code, as different chardevs respond to the setup calls differently, so do frontends work differently basing on those setup responses. Moreover, some frontend can generally get and save the backend pointer (qemu_chr_fe_get_driver()), and it will become invalid after backend change. So, a frontend which would like to support chardev hotswap has to register a "backend change" handler, and redo its backend setup there. Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <1499342940-56739-4-git-send-email-anton.nefedov@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-11block: rip out all traces of password promptingDaniel P. Berrange1-9/+1
Now that qcow & qcow2 are wired up to get encryption keys via the QCryptoSecret object, nothing is relying on the interactive prompting for passwords. All the code related to password prompting can thus be ripped out. Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-17-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-29Add chardev-send-break monitor commandStefan Fritsch1-0/+20
Sending a break on a serial console can be useful for debugging the guest. But not all chardev backends support sending breaks (only telnet and mux do). The chardev-send-break command allows to send a break even if using other backends. Signed-off-by: Stefan Fritsch <sf@sfritsch.de> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170611074817.13621-1-sf@sfritsch.de> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Use 'send a break' in all 3 pieces of text as suggested by eblake
2017-06-28migration: add "return-path" capabilityPeter Xu1-1/+4
When this capability is enabled, QEMU will use the return path even for precopy migration. This is helpful at least in one case when destination failed to load the image while source quited without confirmation. With return path, source will wait for the last response from destination, and if destination fails, it'll fail the migration on source, then the guest can be run again on the source (rather than assuming to be good, then the guest will be lost after source quits). It needs to be enabled explicitly on source, otherwise disabled. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1498472935-14461-1-git-send-email-peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-05-30Merge remote-tracking branch 'armbru/tags/pull-qapi-2017-05-23' into stagingStefan Hajnoczi1-2/+0
QAPI patches for 2017-05-23 # gpg: Signature made Tue 23 May 2017 12:33:32 PM BST # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * armbru/tags/pull-qapi-2017-05-23: qapi-schema: Remove obsolete note from ObjectTypeInfo block: Use QDict helpers for --force-share shutdown: Expose bool cause in SHUTDOWN and RESET events shutdown: Add source information to SHUTDOWN and RESET shutdown: Preserve shutdown cause through replay shutdown: Prepare for use of an enum in reset/shutdown_request shutdown: Simplify shutdown_signal sockets: Plug memory leak in socket_address_flatten() scripts/qmp/qom-set: fix the value argument passed to srv.command() Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-23qapi-schema: Remove obsolete note from ObjectTypeInfoEduardo Habkost1-2/+0
The "This command is experimental" note in ObjectTypeInfo is obsolete since 2012. Commit 5192082097549c5b3aa7c913c6853d97a68172cb removed the warning from the qom-list-types command documentation, but we forgot to remove the warning from ObjectTypeInfo. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170516205351.12101-1-ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-18migration: Create block capabilityJuan Quintela1-3/+25
Create one capability for block migration and one parameter for incremental block migration. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> --- - address all Markus comments - use Markus and Eric text descriptions - change logic another time - improve text messages
2017-05-11numa: add '-numa cpu,...' option for property based node mappingIgor Mammedov1-2/+19
legacy cpu to node mapping is using cpu index values to map VCPU to node with help of '-numa node,nodeid=node,cpus=x[-y]' option. However cpu index is internal concept and QEMU users have to guess /reimplement qemu's logic/ to map it to a concrete cpu socket/core/thread to make sane CPUs placement across numa nodes. This patch allows to map cpu objects to numa nodes using the same properties as used for cpus with -device/device_add (socket-id/core-id/thread-id/node-id). At present valid properties/values to address CPUs could be fetched using hotpluggable-cpus monitor/qmp command, it will require user to start qemu twice when creating domain to fetch possible CPUs for a machine type/-smp layout first and then the second time with numa explicit mapping for actual usage. The first step results could be saved and reused to set/change mapping later as far as machine type/-smp stays the same. Proposed impl. supports exact and wildcard matching to simplify CLI and allow to set mapping for a specific cpu or group of cpu objects specified by matched properties. For example: # exact mapping x86 -numa cpu,node-id=x,socket-id=y,core-id=z,thread-id=n # exact mapping SPAPR -numa cpu,node-id=x,core-id=y # wildcard mapping, all cpu objects that match socket-id=y # are mapped to node-id=x -numa cpu,node-id=x,socket-id=y Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1494415802-227633-18-git-send-email-imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-11QMP: include CpuInstanceProperties into query_cpus output outputIgor Mammedov1-1/+5
if board supports CpuInstanceProperties, report them for each CPU thread listed. Main motivation for this is to provide these properties introspection via QMP interface for using in test cases to verify numa node to cpu mapping, which includes not only boards that support cpu hotplug and have this info in query-hotpluggable-cpus (pc/spapr) but also for boards that don't not support hotpluggable-cpus but support numa mapping (virt-arm). Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1494415802-227633-12-git-send-email-imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-11numa: Allow setting NUMA distance for different NUMA nodesHe Chen1-2/+28
This patch is going to add SLIT table support in QEMU, and provides additional option `dist` for command `-numa` to allow user set vNUMA distance by QEMU command. With this patch, when a user wants to create a guest that contains several vNUMA nodes and also wants to set distance among those nodes, the QEMU command would like: ``` -numa node,nodeid=0,cpus=0 \ -numa node,nodeid=1,cpus=1 \ -numa node,nodeid=2,cpus=2 \ -numa node,nodeid=3,cpus=3 \ -numa dist,src=0,dst=1,val=21 \ -numa dist,src=0,dst=2,val=31 \ -numa dist,src=0,dst=3,val=41 \ -numa dist,src=1,dst=2,val=21 \ -numa dist,src=1,dst=3,val=31 \ -numa dist,src=2,dst=3,val=21 \ ``` Signed-off-by: He Chen <he.chen@linux.intel.com> Message-Id: <1493260558-20728-1-git-send-email-he.chen@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-09sockets: Limit SocketAddressLegacy to external interfacesMarkus Armbruster1-6/+7
SocketAddressLegacy is a simple union, and simple unions are awkward: they have their variant members wrapped in a "data" object on the wire, and require additional indirections in C. SocketAddress is the equivalent flat union. Convert all users of SocketAddressLegacy to SocketAddress, except for existing external interfaces. See also commit fce5d53..9445673 and 85a82e8..c5f1ae3. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Minor editing accident fixed, commit message and a comment tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-09sockets: Rename SocketAddressFlat to SocketAddressMarkus Armbruster1-7/+7
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-6-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
2017-05-09sockets: Rename SocketAddress to SocketAddressLegacyMarkus Armbruster1-6/+8
The next commit will rename SocketAddressFlat to SocketAddress, and the commit after that will replace most uses of SocketAddressLegacy by SocketAddress, replacing most of this commit's renames right back. Note that checkpatch emits a few "line over 80 characters" warnings. The long lines are all temporary; the SocketAddressLegacy replacement will shorten them again. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-04chardev: Basic support for TN3270Jing Liu1-0/+3
This introduces basic support for TN3270, which needs to negotiate three Telnet options during handshake: - End of Record - Binary Transmission - Terminal-Type As a basic implementation, this simply ignores NOP and Interrupt Process(IP) commands. More work should be done for them later. For more details, please refer to RFC 854 and 1576. Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com> Signed-off-by: Yang Chen <bjcyang@linux.vnet.ibm.com> Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Acked-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-04-21ram: Add page-size to output in 'info migrate'Chao Fan1-1/+4
The number of dirty pages is output in 'pages' in the command 'info migrate', so add page-size to calculate the number of dirty pages in bytes. Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-04-03qapi-schema: SocketAddressFlat variants 'vsock' and 'fd'Markus Armbruster1-11/+8
Note that the new variants are impossible in qemu_gluster_glfs_init(), because the gconf->server can only come from qemu_gluster_parse_uri() or qemu_gluster_parse_json(), and neither can create anything but 'inet' or 'unix'. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1490895797-29094-7-git-send-email-armbru@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-03-28rbd: Reject -blockdev server.*.{numeric, to, ipv4, ipv6}Markus Armbruster1-7/+14
We use InetSocketAddress in the QAPI schema. However, the code doesn't use inet_connect_saddr(), but formats "host" and "port" into a configuration string for rados_conf_set(). Thus, members "numeric", "to", "ipv4" and "ipv6" are silently ignored. Not nice. Example: -blockdev rbd,node-name=nn,pool=p,image=i,server.0.host=h0,server.0.port=12345,server.0.ipv4=off Factor a suitable InetSocketAddressBase out of InetSocketAddress, and use that. "numeric", "to", "ipv4" and "ipv6" are now rejected. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-id: 1490691368-32099-2-git-send-email-armbru@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-03-16Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20170316' ↵Peter Maydell1-0/+4
into staging migration/next for 20170316 # gpg: Signature made Thu 16 Mar 2017 08:21:51 GMT # gpg: using RSA key 0xF487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * remotes/juanquintela/tags/migration/20170316: postcopy: Check for shared memory RAMBlocks: qemu_ram_is_shared vmstate: fix failed iotests case 68 and 91 migration/block: Avoid invoking blk_drain too frequently migration: use "" as the default for tls-creds/hostname Change the method to calculate dirty-pages-rate Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-16migration: use "" as the default for tls-creds/hostnameDaniel P. Berrange1-0/+4
The tls-creds parameter has a default value of NULL indicating that TLS should not be used. Setting it to non-NULL enables use of TLS. Once tls-creds are set to a non-NULL value via the monitor, it isn't possible to set them back to NULL again, due to current implementation limitations. The empty string is not a valid QObject identifier, so this switches to use "" as the default, indicating that TLS will not be used The tls-hostname parameter has a default value of NULL indicating the the hostname from the migrate connection URI should be used. Again, once tls-hostname is set non-NULL, to override the default hostname for x509 cert validation, it isn't possible to reset it back to NULL via the monitor. The empty string is not a valid hostname, so this switches to use "" as the default, indicating that the migrate URI hostname should be used. Using "" as the default for both, also means that the monitor commands "info migrate_parameters" / "query-migrate-parameters" will report existance of tls-creds/tls-parameters even when set to their default values. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-03-16qapi2texi: Implement boxed argument documentationMarkus Armbruster1-1/+1
This replaces manual references like "For the arguments, see the documentation of ..." by a generated reference "Arguments: the members of ...". Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1489582656-31133-25-git-send-email-armbru@redhat.com>
2017-03-16qapi: The #optional tag is redundant, dropMarkus Armbruster1-190/+188
We traditionally mark optional members #optional in the doc comment. Before commit 3313b61, this was entirely manual. Commit 3313b61 added some automation because its qapi2texi.py relied on #optional to determine whether a member is optional. This is no longer the case since the previous commit: the only thing qapi2texi.py still does with #optional is stripping it out. We still reject bogus qapi-schema.json and six places for qga/qapi-schema.json. Thus, you can't actually rely on #optional to see whether something is optional. Yet we still make people add it manually. That's just busy-work. Drop the code to check, fix up and strip out #optional, along with all instances of #optional. To keep it out, add code to reject it, to be dropped again once the dust settles. No change to generated documentation. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1489582656-31133-18-git-send-email-armbru@redhat.com>
2017-03-16qapi2texi: Fix up output around #optionalMarkus Armbruster1-3/+3
We use tag #optional to mark optional members, like this: # @name: #optional The name of the guest texi_body() strips #optional, but not whitespace around it. For the above, we get in qemu-qmp-qapi.texi @item @code{'name'} (optional) The name of the guest @end table The extra space can lead to artifacts in output, e.g in qemu-qmp-ref.7.pod =item C<'name'> (optional) The name of the guest and then in qemu-qmp-ref.7 .IX Item "name (optional)" .Vb 1 \& The name of the guest .Ve instead of intended plain .IX Item "name (optional)" The name of the guest Get rid of these artifacts by removing whitespace around #optional along with it. This turns three minus signs in qapi-schema.json into markup, because they're now at the beginning of the line. Drop them, they're unwanted there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1489582656-31133-11-git-send-email-armbru@redhat.com>
2017-03-16qapi: Have each QAPI schema declare its name rule violationsMarkus Armbruster1-1/+10
qapi.py has a hardcoded white-list of type names that may violate the rule on use of upper and lower case. Add a new pragma directive 'name-case-whitelist', and use it to replace the hard-coded white-list. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1489582656-31133-7-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-03-16qapi: Have each QAPI schema declare its returns white-listMarkus Armbruster1-0/+12
qapi.py has a hardcoded white-list of command names that may violate the rules on permitted return types. Add a new pragma directive 'returns-whitelist', and use it to replace the hard-coded white-list. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1489582656-31133-6-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
generated by cgit v1.1 at 2024-12-26 05:17:47 +0000