| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Python 3.5 and above do not print a warning when logging is not
configured. As a library, it's best practice to leave logging
configuration to the client executable.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514055403.18902-22-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
Add method to hard-kill vm, without any quit commands.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200217150246.29180-19-vsementsov@virtuozzo.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
With a QEMU bug, it can happen that the QEMU process doesn't react to a
'quit' QMP command. If we got an exception during previous QMP
communication (e.g. iotests Timeout expiring), we could also be in an
inconsistent state where after sending 'quit' we immediately read an old
response and close the socket even though the 'quit' command wasn't
processed yet. Both cases would lead to a hanging test.
Fix this by waiting for the QEMU process to exit after sending 'quit'
with a timeout, and if it doesn't happen within three seconds, send
SIGKILL.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200313083617.8326-3-kwolf@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
QEMUMachine writes some messages to the default logger.
But it sometimes hard to read the output if we have requests to
more than one VM.
This patch adds a label to the logger in the debug mode.
Signed-off-by: Oksana Vohchana <ovoshcha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200316103203.10046-1-ovoshcha@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
|
|
Currently the QEMU Python module limits the QEMUMachine class to
use the first serial console.
Some machines/guest might use another console than the first one as
the 'boot console'. For example the Raspberry Pi uses the second
(AUX) console.
To be able to use the Nth console as default, we simply need to
connect all the N - 1 consoles to the null chardev.
Add an index argument, so we can use a specific serial console as
default.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200120235159.18510-5-f4bug@amsat.org>
[PMD: zero-initialize _console_index in __init__()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
In case qemu process dies the "monitor.cmd" returns None which gets
passed to the "__negotiate_capabilities" and leads to unhandled
exception. Let's only check the resp in case it has a value.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200120071202.30646-1-ldoktor@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
On ppc64le, the accel.kvm_available() check may wrongly
return False because the host arch (as returned by os.uname[4])
and the target arch (ppc64) mismatch. In order to solve this
it is added an ppc64le -> ppc64 mapping which is used as an
fallback verification.
Fixes: 53a049d7d78e5ccf6d4c0d7
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200205203250.30526-5-wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
The `error` and `timeout` attributes in QEMUMonitorProtocol are
not used, so this delete them.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191227134101.244496-6-wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
This implement the __enter__ and __exit__ functions on
QEMUMonitorProtocol class so that it can be used on 'with'
statement and the resources will be free up on block end:
with QEMUMonitorProtocol(socket_path) as qmp:
qmp.connect()
qmp.command('query-status')
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20200204141111.3207-5-wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
Currently the timeout of QEMUMonitorProtocol.accept() is
hard-coded to 15.0 seconds. This added the parameter `timeout`
so the value can be configured by the user.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20200204141111.3207-4-wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
This clean up the pylint-3 report on qmp:
************* Module qemu.qmp
python/qemu/qmp.py:1:0: C0111: Missing module docstring (missing-docstring)
python/qemu/qmp.py:17:0: C0111: Missing class docstring (missing-docstring)
python/qemu/qmp.py:21:0: C0111: Missing class docstring (missing-docstring)
python/qemu/qmp.py:25:0: C0111: Missing class docstring (missing-docstring)
python/qemu/qmp.py:29:0: C0111: Missing class docstring (missing-docstring)
python/qemu/qmp.py:33:0: C0111: Missing class docstring (missing-docstring)
python/qemu/qmp.py:33:0: R0205: Class 'QEMUMonitorProtocol' inherits from object, can be safely removed from bases in python3 (useless-object-inheritance)
python/qemu/qmp.py:80:4: R1710: Either all return statements in a function should return an expression, or none of them should. (inconsistent-return-statements)
python/qemu/qmp.py:131:4: R1710: Either all return statements in a function should return an expression, or none of them should. (inconsistent-return-statements)
python/qemu/qmp.py:159:4: R1710: Either all return statements in a function should return an expression, or none of them should. (inconsistent-return-statements)
python/qemu/qmp.py:245:4: C0111: Missing method docstring (missing-docstring)
python/qemu/qmp.py:249:4: C0111: Missing method docstring (missing-docstring)
python/qemu/qmp.py:252:4: C0111: Missing method docstring (missing-docstring)
python/qemu/qmp.py:255:4: C0111: Missing method docstring (missing-docstring)
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191227134101.244496-3-wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
The socket.error is deprecated from Python 3.3, instead it is
made a link to OSError. This change replaces the occurences
of socket.error with OSError.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20191227134101.244496-2-wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
__init_.py import some sub-modules unnecessarily. So let's
clean it up.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Suggested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191216191438.93418-6-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
|
|
This adds a method to check if the tcg accelerator is enabled
in the QEMU binary.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191216191438.93418-5-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
|
|
Currently kvm_available() checks for the presence of kvm module
and, if target and host arches don't mismatch. This patch adds
an 3rd checking: if QEMU binary was compiled with kvm
support.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191216191438.93418-4-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
|
|
Since commit cbe6d6365a48 the command `qemu -accel help` returns
the list of accelerators enabled in the QEMU binary. This adds
the list_accel() method which return that same list.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20191216191438.93418-3-wainersm@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
|
|
This creates the 'accel' Python module to be the home for
utilities that deal with accelerators. Also moved kvm_available()
from __init__.py to this new module.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191216191438.93418-2-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
|
|
The QEMUMachine VM has a monitor setup on which an QMP
connection is always attempted on _post_launch() (executed
by launch()). In case the QEMU process immediatly exits
then the qmp.accept() (used to establish the connection) stalls
until it reaches timeout and consequently an exception raises.
That behavior is undesirable when, for instance, it needs to
gather information from the QEMU binary ($ qemu -cpu list) or a
test which launches the VM expecting its failure.
This patch adds the set_qmp_monitor() method to QEMUMachine that
allows turn off the creation of the monitor machinery on VM launch.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191211185536.16962-2-wainersm@redhat.com>
[Cleber: trivial indentation fix]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
|
|
Currently, the console socket on QEMUMachine is closed after the QMP
command to gracefully exit QEMU is executed. Because of a possible
deadlock (QEMU waiting for the socket to become writable) let's close
the console socket earlier.
Reference: <20190607034214.GB22416@habkost.net>
Reference: https://bugs.launchpad.net/qemu/+bug/1829779
From: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190911023558.4880-2-crosa@redhat.com>
|
|
iotests.py itself does not store socket files, but machine.py and
qtest.py do. iotests.py needs to pass the respective path to them, and
they need to adhere to it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
We've got a separate option to configure the accelerator nowadays, which
is shorter to type and the preferred way of specifying an accelerator.
Use it in the source and examples to show that it is the favored option.
(However, do not touch the places yet which also specify other machine
options or multiple accelerators - these are currently still better
handled with one single "-machine" statement instead)
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190904052739.22123-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
If a test has issued a quit command already (which may be useful to do
explicitly because the test wants to show its effects),
QEMUMachine.shutdown() should not do so again. Otherwise, the VM may
well return an ECONNRESET which will lead QEMUMachine.shutdown() to
killing it, which then turns into a "qemu received signal 9" line.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Since we're out in a new module, do a quick cursory pass of some of the
more obvious style issues.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190627212816.27298-3-jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
It's not obvious that something named __init__.py actually houses
important code that isn't relevant to python packaging glue. Move the
QEMUMachine and related error classes out into their own module.
Adjust users to the new import location.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190627212816.27298-2-jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Before, event_match didn't always recurse if the event value was not a
dictionary, and would instead check for equality immediately.
By delaying equality checking to post-recursion, we can allow leaf
values like "5" to match "None" and take advantage of the generic
None-returns-True clause.
This makes the matching a little more obviously consistent at the
expense of being able to check for explicit None values, which is
probably not that important given what this function is used for.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190528183857.26167-1-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Instead of event_wait which looks for a single event, add an events_wait
which can look for any number of events simultaneously. However, it
will still only return one at a time, whichever happens first.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190523170643.20794-4-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
The set_console() utility function either adds a device based on the
explicitly given device type, or adds a known good type of device
based on the machine type.
But, for a number of machine types, it may be impossible or
inconvenient to add the devices by means of "-device" command line
options, and then it may better to just use the "-serial" option and
let QEMU itself, based on the machine type, set the device
accordingly.
To achieve that, the behavior of set_console() now flags the intention
to add a console device on launch(), and if no explicit device type is
given the "-serial" option is going to be added to the QEMU command
line, instead of raising exceptions.
Based on testing with different machine types, the CONSOLE_DEV_TYPES
is not necessary anymore, so it's being removed, as is the logic to
use it.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-13-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
into staging
Python queue, 2019-02-22
Python:
* introduce "python" directory with module namespace
* log QEMU launch command line on qemu.QEMUMachine
Acceptance Tests:
* initrd 4GiB+ test
* migration test
* multi vm support in test class
* bump Avocado version and drop ":avocado: enable"
# gpg: Signature made Fri 22 Feb 2019 19:37:07 GMT
# gpg: using RSA key 657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
Acceptance tests: expect boot to extract 2GiB+ initrd with linux-v4.16
Acceptance tests: use linux-3.6 and set vm memory to 4GiB
tests.acceptance: adds simple migration test
tests.acceptance: adds multi vm capability for acceptance tests
scripts/qemu.py: log QEMU launch command line
Introduce a Python module structure
Acceptance tests: drop usage of ":avocado: enable"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Even when the launch of QEMU succeeds, it's useful to have the command
line recorded.
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190202005610.24048-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
|
|
This is a simple move of Python code that wraps common QEMU
functionality, and are used by a number of different tests
and scripts.
By treating that code as a real Python module, we can more easily:
* reuse code
* have a proper place for the module's own unittests
* apply a more consistent style
* generate documentation
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190206162901.19082-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
|
