Age | Commit message (Collapse) | Author | Files | Lines |
|
There are many Python 3.12 issues right now, but a particularly
problematic one when debugging them is that one cannot even use
minreqs.txt in a Python 3.12 virtual environment to test with
locked package versions.
Bump the mypy and wrapt versions to fix this, while remaining
within the realm of versions compatible with Python 3.7.
This requires a workaround for a mypy false positive
qemu/qmp/qmp_tui.py:350: error: Non-overlapping equality check (left operand type: "Literal[Runstate.DISCONNECTING]", right operand type: "Literal[Runstate.IDLE]") [comparison-overlap]
where mypy does not realize that self.disconnect() could change
the value of self.runstate.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
importlib.metadata is just as good as distlib.database and a bit more
battle-proven for "egg" based distributions, and in fact that is exactly
why mkvenv.py is not using distlib.database to find entry points: it
simply does not work for eggs.
The only disadvantage of importlib.metadata is that it is not available
by default before Python 3.8, so we need a fallback to pkg_resources
(again, just like for the case of finding entry points). Do so to
fix issues where incorrect egg metadata results in a JSONDecodeError.
While at it, reuse the new _get_version function to diagnose an incorrect
version of the package even if importlib.metadata is not available.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The version of pyflakes that is listed in python/tests/minreqs.txt
breaks on Python 3.8 with the following message:
AttributeError: 'FlakesChecker' object has no attribute 'CONSTANT'
Now that we do not support EOL'd Python versions anymore, we can
update to newer, fixed versions. It is a good time to do so, before
Python packages start dropping support for Python 3.7 as well!
The new mypy is also a bit smarter about which packages are actually
being used, so remove the now-unnecessary sections from setup.cfg.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230511035435.734312-27-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Python 3.6 was EOL 2021-12-31. Newer versions of upstream libraries have
begun dropping support for this version and it is becoming more
cumbersome to support. Avocado-framework and qemu.qmp each have their
own reasons for wanting to drop Python 3.6, but won't until QEMU does.
Versions of Python available in our supported build platforms as of today,
with optional versions available in parentheses:
openSUSE Leap 15.4: 3.6.15 (3.9.10, 3.10.2)
CentOS Stream 8: 3.6.8 (3.8.13, 3.9.16)
CentOS Stream 9: 3.9.13
Fedora 36: 3.10
Fedora 37: 3.11
Debian 11: 3.9.2
Alpine 3.14, 3.15: 3.9.16
Alpine 3.16, 3.17: 3.10.10
Ubuntu 20.04 LTS: 3.8.10
Ubuntu 22.04 LTS: 3.10.4
NetBSD 9.3: 3.9.13*
FreeBSD 12.4: 3.9.16
FreeBSD 13.1: 3.9.16
OpenBSD 7.2: 3.9.16
Note: Our VM tests install 3.9 explicitly for FreeBSD and 3.10 for
NetBSD; the default for "python" or "python3" in FreeBSD is
3.9.16. NetBSD does not appear to have a default meta-package, but
offers several options, the lowest of which is 3.7.15. "python39"
appears to be a pre-requisite to one of the other packages we request in
tests/vm/netbsd. pip, ensurepip and other Python essentials are
currently only available for Python 3.10 for NetBSD.
CentOS and OpenSUSE support parallel installation of multiple Python
interpreters, and binaries in /usr/bin will always use Python 3.6. However,
the newly introduced support for virtual environments ensures that all build
steps that execute QEMU Python code use a single interpreter.
Since it is safe to under our supported platform policy, bump our
minimum supported version of Python to 3.7.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230511035435.734312-24-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
distlib is usually not installed on Linux distribution, but it is vendored
into pip. Because the virtual environment has pip via ensurepip, we
can piggy-back on pip's vendored version. This could break if they move
our cheese in the future, but the fix would be simply to require distlib.
If it is debundled, as it is on msys, it is simply available directly.
Signed-off-by: John Snow <jsnow@redhat.com>
[Move to toplevel. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When creating a virtual environment that inherits system packages,
script entry points (like "meson", "sphinx-build", etc) are not
re-generated with the correct shebang. When you are *inside* of the
venv, this is not a problem, but if you are *outside* of it, you will
not have a script that engages the virtual environment appropriately.
Add a mechanism that generates new entry points for pre-existing
packages so that we can use these scripts to run "meson",
"sphinx-build", "pip", unambiguously inside the venv.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230511035435.734312-9-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This command is to be used to add various packages (or ensure they're
already present) into the configure-provided venv in a modular fashion.
Examples:
mkvenv ensure --online --dir "${source_dir}/python/wheels/" "meson>=0.61.5"
mkvenv ensure --online "sphinx>=1.6.0"
mkvenv ensure "qemu.qmp==0.0.2"
It's designed to look for packages in three places, in order:
(1) In system packages, if the version installed is already good
enough. This way your distribution-provided meson, sphinx, etc are
always used as first preference.
(2) In a vendored packages directory. Here I am suggesting
qemu.git/python/wheels/ as that directory. This is intended to serve as
a replacement for vendoring the meson source for QEMU tarballs. It is
also highly likely to be extremely useful for packaging the "qemu.qmp"
package in source distributions for platforms that do not yet package
qemu.qmp separately.
(3) Online, via PyPI, ***only when "--online" is passed***. This is only
ever used as a fallback if the first two sources do not have an
appropriate package that meets the requirement. The ability to build
QEMU and run tests *completely offline* is not impinged.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230511035435.734312-7-jsnow@redhat.com>
[Use distlib to lookup distributions. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This script will be responsible for building a lightweight Python
virtual environment at configure time. It works with Python 3.6 or
newer.
It has been designed to:
- work *offline*, no PyPI required.
- work *quickly*, The fast path is only ~65ms on my machine.
- work *robustly*, with multiple fallbacks to keep things working.
- work *cooperatively*, using system packages where possible.
(You can use your distro's meson, no problem.)
Due to its unique position in the build chain, it exists outside of the
installable python packages in-tree and *must* be runnable without any
third party dependencies.
Under normal circumstances, the only dependency required to execute this
script is Python 3.6+ itself. The script is *faster* by several seconds
when setuptools and pip are installed in the host environment, which is
probably the case for a typical multi-purpose developer workstation.
In the event that pip/setuptools are missing or not usable, additional
dependencies may be required on some distributions which remove certain
Python stdlib modules to package them separately:
- Debian may require python3-venv to provide "ensurepip"
- NetBSD may require py310-expat to provide "pyexpat" *
(* Or whichever version is current for NetBSD.)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230511035435.734312-4-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pylint 2.17.x decided that SocketAddrT was a bad name for a Type Alias for some
reason. Sure, fine, whatever.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230511035435.734312-3-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The pipenv tool was nice in theory, but in practice it's just too hard
to update selectively, and it makes using it a pain. The qemu.qmp repo
dropped pipenv support a while back and it's been functioning just fine,
so I'm backporting that change here to qemu.git.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20230210003147.1309376-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-id: 20221203005234.620788-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Newer flake8 versions are a bit pickier about the config file, and my
in-line comment confuses the parser. Fix it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-id: 20221203005234.620788-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
typeshed (included in mypy) recently updated to improve the typing for
WriteTransport objects. I was working around this, but now there's a
version where I shouldn't work around it.
Unfortunately this creates some minor ugliness if I want to support both
pre- and post-0.950 versions. For now, for my sanity, just disable the
unused-ignores warning.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220526000921.1581503-2-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is the last vestige of the "aqmp" moniker surviving in the tree; remove it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-id: 20220330172812.3427355-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Now that we are fully switched over to the new QMP library, move it back
over the old namespace. This is being done primarily so that we may
upload this package simply as "qemu.qmp" without introducing confusion
over whether or not "aqmp" is a new protocol or not.
The trade-off is increased confusion inside the QEMU developer
tree. Sorry!
Note: the 'private' member "_aqmp" in legacy.py also changes to "_qmp";
not out of necessity, but just to remove any traces of the "aqmp"
name.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-id: 20220330172812.3427355-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
With the old library gone, there's nothing duplicated in the tree, so
the warning suppression can be removed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220330172812.3427355-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Thank you for your service!
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220330172812.3427355-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
The next several commits copy some code from qemu.qmp to qemu.aqmp, then
delete qemu.qmp. In the interim, to prevent test failures, the duplicate
code detection needs to be silenced to prevent bisect problems with CI
testing.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20220330172812.3427355-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
This reverts commit 1e4d8b31be35e54b6429fea54f5ecaa0083f91e7.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20220204221804.2047468-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
When running QMP commands with very large response payloads, it is often
not easy to spot the info you want. If we can save the response to a
file then tools like 'grep' or 'jq' can be used to extract information.
For convenience of processing, we merge the QMP command and response
dictionaries together:
{
"arguments": {},
"execute": "query-kvm",
"return": {
"enabled": false,
"present": true
}
}
Example usage
$ ./scripts/qmp/qmp-shell-wrap -l q.log -p -- ./build/qemu-system-x86_64 -display none
Welcome to the QMP low-level shell!
Connected
(QEMU) query-kvm
{
"return": {
"enabled": false,
"present": true
}
}
(QEMU) query-mice
{
"return": [
{
"absolute": false,
"current": true,
"index": 2,
"name": "QEMU PS/2 Mouse"
}
]
}
$ jq --slurp '. | to_entries[] | select(.value.execute == "query-kvm") |
.value.return.enabled' < q.log
false
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220128161157.36261-3-berrange@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
With the current 'qmp-shell' tool developers must first spawn QEMU with
a suitable -qmp arg and then spawn qmp-shell in a separate terminal
pointing to the right socket.
With 'qmp-shell-wrap' developers can ignore QMP sockets entirely and
just pass the QEMU command and arguments they want. The program will
listen on a UNIX socket and tell QEMU to connect QMP to that.
For example, this:
# qmp-shell-wrap -- qemu-system-x86_64 -display none
Is roughly equivalent of running:
# qemu-system-x86_64 -display none -qmp qmp-shell-1234 &
# qmp-shell qmp-shell-1234
Except that 'qmp-shell-wrap' switches the socket peers around so that
it is the UNIX socket server and QEMU is the socket client. This makes
QEMU reliably go away when qmp-shell-wrap exits, closing the server
socket.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220128161157.36261-2-berrange@redhat.com
[Edited for rebase. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
We need a slightly newer version of mypy in order to use some features
of the asyncio server functions in the next commit.
(Note: pipenv is not really suited to upgrading individual packages; I
need to replace this tool with something better for the task. For now,
the miscellaneous updates not related to the mypy upgrade are simply
beyond my control. It's on my list to take care of soon.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20220201041134.1237016-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
|
|
In order to upload a QMP package to PyPI, I want to remove any scripts
that I am not 100% confident I want to support upstream, beyond our
castle walls.
Move most of our QMP utilities into the utils package so we can split
them out from the PyPI upload.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
|
|
setuptools is a package that replaces the python stdlib 'distutils'. It
is generally installed by all venv-creating tools "by default". It isn't
actually needed at runtime for the qemu package, so our own setup.cfg
does not mention it as a dependency.
However, tox will create virtual environments that include it, and will
upgrade it to the very latest version. the 'venv' tool will also include
whichever version your host system happens to have.
Unfortunately, setuptools version 60.0.0 and above include a hack to
forcibly overwrite python's built-in distutils. The pylint tool that we
use to run code analysis checks on this package relies on distutils and
suffers regressions when setuptools >= 60.0.0 is present at all, see
https://github.com/PyCQA/pylint/issues/5704
Instruct tox and the 'check-dev' targets to avoid setuptools packages
that are too new, for now. Pipenv is unaffected, because setuptools 60
does not offer Python 3.6 support, and our pipenv config is pinned
against Python 3.6.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20220121005221.142236-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Added pygments as optional dependency for AQMP TUI.
This is required for the upcoming syntax highlighting feature
in AQMP TUI.
The dependency has also been added in the devel optional group.
Added mypy 'ignore_missing_imports' for pygments since it does
not have any type stubs.
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-5-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Add an entry point for aqmp-tui. This will allow it to be run from
the command line using "aqmp-tui localhost:1234"
More options available in the TUI can be found using "aqmp-tui -h"
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-4-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Added AQMP TUI.
Implements the follwing basic features:
1) Command transmission/reception.
2) Shows events asynchronously.
3) Shows server status in the bottom status bar.
4) Automatic retries on disconnects and error conditions.
Also added type annotations and necessary pylint/mypy configurations.
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-3-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Added dependencies for the upcoming AQMP TUI under the optional
'tui' group.
The same dependencies have also been added under the devel group
since no work around has been found for optional groups to imply
other optional groups.
Signed-off-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-Id: <20210823220746.28295-2-niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
I'm not exposing this via the Makefile help, it's not likely to be
useful to passersby. Switch the avocado runner to the 'legacy' runner
for now, as the new runner seems to obscure coverage reports, again.
Usage is to enter your venv of choice and then:
`make check-coverage && xdg-open htmlcov/index.html`.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-28-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Avocado v90 includes improved support for running async unit tests. The
workaround that existed prior to v90 causes the unit tests to fail
afterwards, however, so upgrade our minimum version pin to the very
latest and greatest.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-25-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
mypy handles this better -- but we only need the workaround because
pylint under Python 3.6 does not understand that a MutableMapping really
does have a .get() method attached.
We could remove this again once 3.7 is our minimum.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-19-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
too-many-function-args seems prone to failure when considering
things like Method Resolution Order, which mypy gets correct. When
dealing with multiple inheritance, pylint doesn't seem to understand
which method will actually get called, while mypy does.
Remove the less powerful, redundant check.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-17-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
'T' is a common TypeVar name, allow its use.
See also https://github.com/PyCQA/pylint/issues/3401 -- In the future,
we might be able to have a separate list of acceptable names for
TypeVars exclusively.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210915162955.333025-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
For now, it's empty! Soon, it won't be.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210915162955.333025-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
We're not ready to enforce f-strings everywhere, so just silence this
new warning.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210916182248.721529-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
A few new annoyances. Of note is the new warning for an unspecified
encoding when opening a text file, which actually does indicate a
potentially real problem; see
https://www.python.org/dev/peps/pep-0597/#motivation
Use LC_CTYPE to determine an encoding to use for interpreting QEMU's
terminal output. Note that Python states: "language code and encoding
may be None if their values cannot be determined" -- use a platform
default as a backup.
Notes: Passing encoding=None will generate a suppressed warning on
Python 3.10+ that 'None' should not be passed as the encoding
argument. This behavior may be deprecated in the future and the default
switched to be a ubiquitous UTF-8. Opting in to the locale default will
be done by passing the encoding 'locale', but that isn't available in
3.6 through 3.9. Presumably this warning will be unsuppressed some time
prior to the actual switch and we can re-investigate these issues at
that time if necessary.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210916182248.721529-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Pylint prior to 2.8.3 (We pin at >= 2.8.0) includes function and method
signatures as part of its duplicate checking algorithm. This check does
not listen to pragmas, so the only way to disable it is to turn it off
completely or increase the minimum duplicate lines so that it doesn't
trigger for functions with long, multi-line signatures.
When we decide to upgrade to pylint 2.8.3 or greater, we will be able to
use 'ignore-signatures = true' to the config instead.
I'd prefer not to keep us on the very bleeding edge of pylint if I can
help it -- 2.8.3 came out only three days ago at time of writing.
See: https://github.com/PyCQA/pylint/pull/4474
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210809090114.64834-3-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
|
|
Currently tox tests against the installed interpreters, however if any
supported interpreter is absent then it will return fail. It seems not
reasonable to expect developers to have all supported interpreters
installed on their systems. Luckily tox can be configured to skip
missing interpreters.
This changed the tox setup so that missing interpreters are skipped by
default. On the CI, however, we still want to enforce it tests
against all supported. This way on CI the
--skip-missing-interpreters=false option is passed to tox.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210630184546.456582-1-wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
|
|
flake8 is a little eager to check everything it can. Limit it to
checking inside the qemu namespace directory only. Update setup.cfg now
that the exclude patterns are no longer necessary.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
tox is already testing the most recent versions. Let's use pipenv to
test the oldest versions we claim to support. This matches the stylistic
choice to have pipenv always test our oldest supported Python version, 3.6.
The effect of this is that the python-check-pipenv CI job on gitlab will
now test against much older versions of these linters, which will help
highlight incompatible changes that might otherwise go unnoticed.
Update instructions for adding and bumping versions in setup.cfg. The
reason for deleting the line that gets added to Pipfile is largely just
to avoid having the version minimums specified in multiple places in
config checked into the tree.
(This patch was written by deleting Pipfile and Pipfile.lock, then
explicitly installing each dependency manually at a specific
version. Then, I restored the prior Pipfile and re-ran `pipenv lock
--dev --keep-outdated` to re-add the qemu dependency back to the pipenv
environment while keeping the "old" packages. It's annoying, yes, but I
think the improvement to test coverage is worthwhile.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
These suppressions only apply to a small handful of places. Instead of
disabling them globally, disable them just in the cases where we
need. The design of the machine class grew quite organically with tons
of constructor and class instance variables -- there's little chance of
meaningfully refactoring it in the near term, so just suppress the
warnings for that class.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
https://www.python.org/dev/peps/pep-0561/#specification
Create 'py.typed' files in each subpackage that indicate to mypy that
this is a typed module, so that users of any of these packages can use
mypy to check their code as well.
Note: Theoretically it's possible to ditch MANIFEST.in in favor of using
package_data in setup.cfg, but I genuinely could not figure out how to
get it to include things from the *source root* into the *package root*;
only how to include things from each subpackage. I tried!
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
now 'qmp-shell' should be available from the command line when
installing the python package.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-42-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Remove the shebang, and add a package-defined entry point instead. Now,
it can be accessed using 'qemu-ga-client' from the command line after
installing the package.
The next commit adds a forwarder shim that allows the running of this
script without needing to install the package again.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
The 'fuse' command will be unavailable if 'fusepy' is not installed. It
will simply not load and subsequently be unavailable as a subcommand.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-20-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
In preparation for moving qom-fuse over to the python package, we need
some new dependencies to support it.
Add an optional 'fusepy' dependency that users of the package can opt
into with e.g. "pip install qemu[fuse]" which installs the requirements
necessary to obtain the additional functionality.
Add the same fusepy dependency to the 'devel' extras group --
unfortunately I do not see a way for optional groups to imply other
optional groups at present, so the dependency is repeated. The
development group needs to include the full set of dependencies for the
purpose of static analysis of all features offered by this library.
Lastly, add the [fuse] extras group to tox's configuration as a
workaround so that if a stale tox environment is found when running
`make check-tox`, tox will know to rebuild its environments.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-17-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Because fusepy does not have type hints, add some targeted warning
suppressions.
Namely, we need to allow subclassing something of an unknown type (in
qom_fuse.py), and we need to allow missing imports (recorded against
fuse itself) because mypy will be unable to import fusepy (even when
installed) as it has no types nor type stubs available.
Note: Until now, it was possible to run invocations like 'mypy qemu/'
from ./python and have that work. However, these targeted suppressions
require that you run 'mypy -p qemu/' instead. The correct, canonical
invocation is recorded in ./python/tests/mypy.sh and all of the various
CI invocations always use this correct form.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
fd and fh are fine: we often use these for "file descriptor" or "file
handle" accordingly. It is rarely the case that you need to enforce a
more semantically meaningful name beyond "This is the file we are using
right now."
While we're here: add comments for all of the non-standard pylint
names. (And the underscore.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Add the 'qom', 'qom-set', 'qom-get', 'qom-list', and 'qom-tree' scripts
to the qemu.qmp package. When you install this package, these scripts
will become available on your command line.
(e.g. when inside of a venv, `cd python && pip install .` will add
'qom', 'qom-set', etc to your $PATH.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|