aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2018-03-05Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell3-228/+135
staging # gpg: Signature made Mon 05 Mar 2018 03:06:59 GMT # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: tap: setting error appropriately when calling net_init_tap_one() hw/net: Remove unnecessary header includes net: Add a new convenience option "--nic" to configure default/on-board NICs net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commands net: Remove the deprecated way of dumping network packets net: Make net_client_init() static net: Only show vhost-user in the help text if CONFIG_POSIX is defined net: List available netdevs with "-netdev help" net: Move error reporting from net_init_client/netdev to the calling site Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-05tap: setting error appropriately when calling net_init_tap_one()Jay Zhou1-5/+17
If netdev_add tap,id=net0,...,vhost=on failed in net_init_tap_one(), the followed up device_add virtio-net-pci,netdev=net0 will fail too, prints: TUNSETOFFLOAD ioctl() failed: Bad file descriptor TUNSETOFFLOAD ioctl() failed: Bad file descriptor The reason is that the fd of tap is closed when error occured after calling net_init_tap_one(). The fd should be closed when calling net_init_tap_one failed: - if tap_set_sndbuf() failed - if tap_set_sndbuf() succeeded but vhost failed to open or initialize with vhostforce flag on - with wrong vhost command line parameter The fd should not be closed just because vhost failed to open or initialize but without vhostforce flag. So the followed up device_add can fall back to userspace virtio successfully. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Add a new convenience option "--nic" to configure default/on-board NICsThomas Huth1-0/+78
The legacy "-net" option can be quite confusing for the users since most people do not expect to get a "vlan" hub between their emulated guest hardware and the host backend. But so far, we are also not able to get rid of "-net" completely, since it is the only way to configure on-board NICs that can not be instantiated via "-device" yet. It's also a little bit shorter to type "-net nic -net tap" instead of "-device xyz,netdev=n1 -netdev tap,id=n1". So what we need is a new convenience option that is shorter to type than the full -device + -netdev stuff, and which can be used to configure the on-board NICs that can not be handled via -device yet. Thus this patch now provides such a new option "--nic": It adds an entry in the nd_table to configure a on-board / default NIC, creates a host backend and connects the two directly, without a confusing "vlan" hub inbetween. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commandsThomas Huth1-94/+0
They are deprecated since QEMU v2.10, and so far nobody complained that these commands are still necessary for any reason - and since you can use 'netdev_add' and 'netdev_remove' instead, there also should not be any real reason. Since they are also standing in the way for the upcoming 'vlan' clean-up, it's now time to remove them. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Remove the deprecated way of dumping network packetsThomas Huth2-108/+3
"-net dump" has been marked as deprecated since QEMU v2.10, since it only works with the deprecated 'vlan' parameter (or hubs). Network dumping should be done with "-object filter-dump" nowadays instead. Since nobody complained so far about the deprecation message, let's finally get rid of "-net dump" now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Make net_client_init() staticThomas Huth1-1/+1
The function is only used within net.c, so there's no need that this is a global function. While we're at it, also remove the unused prototype compute_mcast_idx() (the function has been removed in commit d9caeb09b107e91122d10ba4a08a). Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: List available netdevs with "-netdev help"Thomas Huth1-1/+36
Other options like "-chardev" or "-device" feature a nice help text with the available devices when being called with "help" or "?". Since it is quite useful, especially if you want to see which network backends have been compiled into the QEMU binary, let's provide such a help text for "-netdev", too. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Move error reporting from net_init_client/netdev to the calling siteThomas Huth1-24/+5
It looks strange that net_init_client() and net_init_netdev() both take an "Error **errp" parameter, but then do the error reporting with "error_report_err(local_err)" on their own. Let's move the error reporting to the calling site instead to simplify this code a little bit. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-02qapi: Move qapi-schema.json to qapi/, rename generated filesMarkus Armbruster1-1/+1
Move qapi-schema.json to qapi/, so it's next to its modules, and all files get generated to qapi/, not just the ones generated for modules. Consistently name the generated files qapi-MODULE.EXT: qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch]. This gets rid of the temporary hacks in scripts/qapi/commands.py, scripts/qapi/events.py, and scripts/qapi/common.py. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-28-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> [eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster7-8/+5
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-01vhost-user: fix memory leaklinzhecheng1-0/+1
g_free() was moved from vhost_net_cleanup in commit e6bcb1b, so we should free net after vhost_net_cleanup Signed-off-by: linzhecheng <linzhecheng@huawei.com> Reviewed-by: Marc-André Lureau < marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-02-13net/can: support for connecting to Linux host SocketCAN interface.Pavel Pisa2-0/+287
Connection to the real host CAN bus network through SocketCAN network interface is available only for Linux host system. Mechanism is generic, support for another CAN API and operating systems can be implemented in future. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-13net/can: simple messages transport implementation for QEMUPavel Pisa4-0/+253
The CanBusState state structure is created for each emulated CAN channel. Individual clients/emulated CAN interfaces or host interface connection registers to the bus by CanBusClientState structure. The CAN core is prepared to support connection to the real host CAN bus network. The commit with such support for Linux SocketCAN follows. Implementation is as simple as possible. There is no state to be migrated, and messages prioritization and queuing are not considered for now. But it is intended to be extended when need arises. Development repository and more documentation at https://gitlab.fel.cvut.cz/canbus/qemu-canbus The work is based on Jin Yang GSoC 2013 work funded by Google and mentored in frame of RTEMS project GSoC slot donated to QEMU. Rewritten for QEMU-2.0+ versions and architecture cleanup by Pavel Pisa (Czech Technical University in Prague). Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster2-1/+2
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09Include qapi/qmp/qdict.h exactly where neededMarkus Armbruster3-0/+4
This cleanup makes the number of objects depending on qapi/qmp/qdict.h drop from 4550 (out of 4743) to 368 in my "build everything" tree. For qapi/qmp/qobject.h, the number drops from 4552 to 390. While there, separate #include from file comment with a blank line. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09Drop superfluous includes of qapi/qmp/qerror.hMarkus Armbruster3-3/+0
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-6-armbru@redhat.com>
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster4-2/+3
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-09Drop superfluous includes of qapi-types.h and test-qapi-types.hMarkus Armbruster2-2/+0
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-4-armbru@redhat.com>
2018-01-29net: Allow netdevs to be used with 'hostfwd_add' and 'hostfwd_remove'Thomas Huth1-10/+23
It does not make much sense to limit these commands to the legacy 'vlan' concept only, they should work with the modern netdevs, too. So now it is possible to use this command with one, two or three parameters. With one parameter, the command installs a hostfwd rule on the default "user" network: hostfwd_add tcp:... With two parameters, the command installs a hostfwd rule on a netdev (that's the new way of using this command): hostfwd_add netdev_id tcp:... With three parameters, the command installs a rule on a 'vlan' (aka hub): hostfwd_add hub_id name tcp:... Same applies to the hostfwd_remove command now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-29net: Allow hubports to connect to other netdevsThomas Huth3-8/+24
QEMU can emulate hubs to connect NICs and netdevs. This is currently primarily used for the mis-named 'vlan' feature of the networking subsystem. Now the 'vlan' feature has been marked as deprecated, since its name is rather confusing and the users often rather mis-configure their network when trying to use it. But while the 'vlan' parameter should be removed at one point in time, the basic idea of emulating a hub in QEMU is still good: It's useful for bundling up the output of multiple NICs into one single l2tp netdev for example. Now to be able to use the hubport feature without 'vlan's, there is one missing piece: The possibility to connect a hubport to a netdev, too. This patch adds this possibility by introducing a new "netdev=..." parameter to the hubports. To bundle up the output of multiple NICs into one socket netdev, you can now run QEMU with these parameters for example: qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \ -netdev hubport,hubid=1,id=h1,netdev=s1 \ -netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \ -netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3 For using the socket netdev, you have got to start another QEMU as the receiving side first, for example with network dumping enabled: qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \ -device ne2k_isa,netdev=s0 \ -object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat After the ppc64 guest tried to boot from both NICs, you can see in the dump file (using Wireshark, for example), that the output of both NICs (the e1000 and the virtio-net-pci) has been successfully transfered via the socket netdev in this case. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-29colo: compare the packet based on the tcp sequence numberMao Zhongyi4-119/+250
Packet size some time different or when network is busy. Based on same payload size, but TCP protocol can not guarantee send the same one packet in the same way, like that: We send this payload: ------------------------------ | header |1|2|3|4|5|6|7|8|9|0| ------------------------------ primary: ppkt1: ---------------- | header |1|2|3| ---------------- ppkt2: ------------------------ | header |4|5|6|7|8|9|0| ------------------------ secondary: spkt1: ------------------------------ | header |1|2|3|4|5|6|7|8|9|0| ------------------------------ In the original method, ppkt1 and ppkt2 are different in size and spkt1, so they can't compare and trigger the checkpoint. I have tested FTP get 200M and 1G file many times, I found that the performance was less than 1% of the native. Now I reconstructed the comparison of TCP packets based on the TCP sequence number. first of all, ppkt1 and spkt1 have the same starting sequence number, so they can compare, even though their length is different. And then ppkt1 with a smaller payload length is used as the comparison length, if the payload is same, send out the ppkt1 and record the offset(the length of ppkt1 payload) in spkt1. The next comparison, ppkt2 and spkt1 can be compared from the recorded position of spkt1. like that: ---------------- | header |1|2|3| ppkt1 ---------|-----| | | ---------v-----v-------------- | header |1|2|3|4|5|6|7|8|9|0| spkt1 ---------------|\------------| | \offset | ---------v-------------v | header |4|5|6|7|8|9|0| ppkt2 ------------------------ In this way, the performance can reach native 20% in my multiple tests. Cc: Zhang Chen <zhangckid@gmail.com> Cc: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Zhang Chen <zhangckid@gmail.com> Reviewed-by: Zhang Chen <zhangckid@gmail.com> Tested-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-29colo: modified the payload compare functionMao Zhongyi1-44/+44
Modified the function colo_packet_compare_common to prepare for the tcp packet comparison in the next patch. Cc: Zhang Chen <zhangckid@gmail.com> Cc: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Zhang Chen <zhangckid@gmail.com> Reviewed-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-22net: Remove the legacy "-net channel" parameterThomas Huth2-41/+0
It has never been documented, so hardly anybody knows about this parameter, and it is marked as deprecated since QEMU v2.6. Time to let it go now. Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-22net: remove unused compute_mcast_idx() functionMark Cave-Ayland1-5/+0
Now that all of the callers have been converted to compute the multicast index inline using new net CRC functions, this function can now be dropped. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-22net: introduce net_crc32_le() functionMark Cave-Ayland1-0/+22
This provides a standard ethernet CRC32 little-endian implementation. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-22net: move CRC32 calculation from compute_mcast_idx() into its own ↵Mark Cave-Ayland1-5/+11
net_crc32() function Separate out the standard ethernet CRC32 calculation into a new net_crc32() function, renaming the constant POLYNOMIAL to POLYNOMIAL_BE to make it clear that this is a big-endian CRC32 calculation. As part of the constant rename, remove the duplicate definition of POLYNOMIAL from eepro100.c and use the new POLYNOMIAL_BE constant instead. Once this is complete remove the existing CRC32 implementation from compute_mcast_idx() and call the new net_crc32() function in its place. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-18misc: remove headers implicitly includedPhilippe Mathieu-Daudé1-1/+0
applied using ./scripts/clean-includes Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Ben Warren <ben@skyportsystems.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-11-20colo-compare: fix the dangerous assignmentMao Zhongyi1-1/+1
Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Zhang Chen <zhangckid@gmail.com> Cc: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Fixes: 8ec14402029d783720f4312ed8a925548e1dad61 Reported-by: Peter Maydell <peter.maydell@linaro.org> Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-11-13net/socket: fix coverity issueJens Freimann1-1/+1
This fixes coverity issue CID1005339. Make sure that saddr is not used uninitialized if the mcast parameter is NULL. Cc: qemu-stable@nongnu.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jens Freimann <jfreimann@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-11-13colo: Consolidate the duplicate code chunk into a routineMao Zhongyi2-8/+11
Consolidate the code that extract the ip address(src,dst) and port number(src,dst) of the packet into a separate routine extract_ip_and_port() since the same chunk of code is called from two place. Cc: Zhang Chen <zhangckid@gmail.com> Cc: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-11-13colo-compare: Fix commentsMao Zhongyi1-3/+5
Cc: Zhang Chen <zhangckid@gmail.com> Cc: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Signed-off-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-11-13colo-compare: compare the packet in a specified ConnectionMao Zhongyi1-5/+8
A package from pri_indev or sec_indev only belongs to a particular Connection, so we only need to compare the package in the specified Connection's primary_list and secondary_list, rather than for each the whole Connection list to compare. This is time-consuming and unnecessary. Less checkpoint more efficiency. Cc: Zhang Chen <zhangckid@gmail.com> Cc: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-11-13colo-compare: Insert packet into the suitable position of packet queue directlyMao Zhongyi1-18/+22
Currently, a packet from pri_dev or sec_dev is fristly pushed at the tail of the primary or secondary packet queue then sorted by the tcp sequence number. Now, this patch use g_queue_insert_sorted to insert the packet directly into the suitable position to avoid ordering all packets each time when a new packet is comming, thereby increasing efficiency. In addition, consolidate the code that add a packet to the list of Connection (primary or secondary) into a separate routine colo_insert_packet() since the same chunk of code is called from two place. Cc: Zhang Chen <zhangckid@gmail.com> Cc: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Signed-off-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-11-13net: fix check for number of parameters to -netdev socketJens Freimann1-2/+2
Since commit 0f8c289ad "net: fix -netdev socket,fd= for UDP sockets" we allow more than one parameter for -netdev socket. But now we run into an assert when no parameter at all is specified > qemu-system-x86_64 -netdev socket socket.c:729: net_init_socket: Assertion `sock->has_udp' failed. Fix this by reverting the change of the if condition done in 0f8c289ad. Cc: Jason Wang <jasowang@redhat.com> Cc: qemu-stable@nongnu.org Fixes: 0f8c289ad539feb5135c545bea947b310a893f4b Reported-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Signed-off-by: Jens Freimann <jfreimann@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-10-16filter-mirror: segfault when specifying non existent deviceEduardo Otubo1-0/+6
When using filter-mirror like the example below where the interface 'ndev0' does not exist on the host, QEMU crashes into segmentation fault. $ qemu-system-x86_64 -S -machine pc -netdev user,id=ndev0 -object filter-mirror,id=test-object,netdev=ndev0 This happens because the function filter_mirror_setup() does not check if the device actually exists and still keep on processing calling qemu_chr_find(). This patch fixes this issue. Signed-off-by: Eduardo Otubo <otubo@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-09-24slirp: Add explanation for hostfwd parsing failureDr. David Alan Gilbert1-1/+12
e.g. ./x86_64-softmmu/qemu-system-x86_64 -nographic -netdev 'user,id=vnet,hostfwd=:555.0.0.0:0-:22' qemu-system-x86_64: -netdev user,id=vnet,hostfwd=:555.0.0.0:0-:22: Invalid host forwarding rule ':555.0.0.0:0-:22' (Bad host address) Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-09-22buildsys: Move vde libs to per objectFam Zheng1-0/+2
Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170907083552.17725-3-famz@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-09-19General warn report fixupsAlistair Francis2-6/+5
Tidy up some of the warn_report() messages after having converted them to use warn_report(). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <9cb1d23551898c9c9a5f84da6773e99871285120.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19Convert multi-line fprintf() to warn_report()Alistair Francis2-12/+11
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these commands: find ./* -type f -exec sed -i \ 'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + Indentation fixed up manually afterwards. Some of the lines were manually edited to reduce the line length to below 80 charecters. Some of the lines with newlines in the middle of the string were also manually edit to avoid checkpatch errrors. The #include lines were manually updated to allow the code to compile. Several of the warning messages can be improved after this patch, to keep this patch mechanical this has been moved into a later patch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Alexander Graf <agraf@suse.de> Cc: Jason Wang <jasowang@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19Convert single line fprintf(.../n) to warn_report()Alistair Francis1-1/+2
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using this command: find ./* -type f -exec sed -i \ 's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \ {} + Some of the lines were manually edited to reduce the line length to below 80 charecters. The #include lines were manually updated to allow the code to compile. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips] Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-08colo-compare: Use IOThread to Check old packet regularly and Process ↵Wang Yong1-38/+45
pactkets of the primary Remove the task which check old packet in the comparing thread, then use IOthread context timer to handle it. Process pactkets in the IOThread which arrived over the socket. we use iothread_get_g_main_context to create a new g_main_loop in the IOThread.then the packets from the primary and the secondary are processed in the IOThread. Finally remove the colo-compare thread using the IOThread instead. Reviewed-by: Zhang Chen<zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Wang Yong <wang.yong155@zte.com.cn> Signed-off-by: Wang Guang <wang.guang55@zte.com.cn> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-08net/colo-compare.c: Fix comments and schemeZhang Chen1-28/+31
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-08net/colo-compare.c: Adjust net queue pop order for performanceZhang Chen1-2/+2
The packet_enqueue() use g_queue_push_tail() to enqueue net packet, so it is more efficent way use g_queue_pop_head() to get packet for compare. That will improve the success rate of comparison. In my test the performance of ftp put 1000M file will increase 10% Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-08net/colo-compare.c: Optimize unpredictable tcp options comparisonZhang Chen1-12/+27
When network is busy, some tcp options(like sack) will unpredictable occur in primary side or secondary side. it will make packet size not same, but the two packet's payload is identical. colo just care about packet payload, so we skip the option field. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-08net/socket: Improve -net socket error reportingMao Zhongyi1-48/+44
When -net socket fails, it first reports a specific error, then a generic one, like this: $ ./x86_64-softmmu/qemu-system-x86_64 -net socket,mcast=230.0.0.1:1234,listen qemu-system-x86_64: -net socket,mcast=230.0.0.1:1234,listen: exactly one of listen=, connect=, mcast= or udp= is required qemu-system-x86_64: -net socket,mcast=230.0.0.1:1234,listen: Device 'socket' could not be initialized Convert net_socket_*_init() to Error to get rid of the superfluous second error message. After the patch, the effect like this: $ ./x86_64-softmmu/qemu-system-x86_64 -net socket,mcast=230.0.0.1:1234,listen qemu-system-x86_64: -net socket,mcast=230.0.0.1:1234,listen: exactly one of listen=, connect=, mcast= or udp= is requireda This also fixes a few silent failures to report an error. Cc: jasowang@redhat.com Cc: armbru@redhat.com Cc: berrange@redhat.com Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-08net/net: Convert parse_host_port() to ErrorMao Zhongyi2-12/+32
Cc: berrange@redhat.com Cc: kraxel@redhat.com Cc: pbonzini@redhat.com Cc: jasowang@redhat.com Cc: armbru@redhat.com Cc: eblake@redhat.com Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-08net/socket: Convert several helper functions to ErrorMao Zhongyi1-32/+50
Currently, net_socket_mcast_create(), net_socket_fd_init_dgram() and net_socket_fd_init() use the function such as fprintf(), perror() to report an error message. Now, convert these functions to Error. Cc: jasowang@redhat.com Cc: armbru@redhat.com Cc: berrange@redhat.com Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-08net/socket: Don't treat odd socket type as SOCK_STREAMMao Zhongyi1-3/+3
In net_socket_fd_init(), the 'default' case is odd: it warns, then continues as if the socket type was SOCK_STREAM. The comment explains "this could be a eg. a pty", but that makes no sense. If @fd really was a pty, getsockopt() would fail with ENOTSOCK. If @fd was a socket, but neither SOCK_DGRAM nor SOCK_STREAM. It should not be treated as if it was SOCK_STREAM. Turn this case into an Error. If there is a genuine reason to support something like SOCK_RAW, it should be explicitly handled. Cc: jasowang@redhat.com Cc: armbru@redhat.com Cc: berrange@redhat.com Cc: armbru@redhat.com Cc: eblake@redhat.com Suggested-by: Markus Armbruster <armbru@redhat.com> Suggested-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-08net/filter-rewriter.c: Fix rewirter checksum bug when use virtio-netZhang Chen1-2/+4
Because vnet_hdr have a offset to net packet, we must add it when use virtio-net. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-04qapi: Change data type of the FOO_lookup generated for enum FOOMarc-André Lureau1-1/+1
Currently, a FOO_lookup is an array of strings terminated by a NULL sentinel. A future patch will generate enums with "holes". NULL-termination will cease to work then. To prepare for that, store the length in the FOO_lookup by wrapping it in a struct and adding a member for the length. The sentinel will be dropped next. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com> [Basically redone] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com> [Rebased]
generated by cgit v1.1 at 2024-12-28 13:13:22 +0000