aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2014-09-04Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into ↵Peter Maydell2-1/+42
staging Net patches # gpg: Signature made Thu 04 Sep 2014 17:32:44 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/net-pull-request: virtio-net: purge outstanding packets when starting vhost net: complete all queued packets on VM stop net: invoke callback when purging queue virtio: don't call device on !vm_running virtio-net: don't run bh on vm stopped net: Forbid dealing with packets when VM is not running Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-04net: complete all queued packets on VM stopMichael S. Tsirkin1-1/+32
This completes all packets, ensuring that callbacks will not run when VM is stopped. Cc: qemu-stable@nongnu.org Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-04net: invoke callback when purging queueMichael S. Tsirkin1-0/+3
devices rely on packet callbacks eventually running, but we violate this rule whenever we purge the queue. To fix, invoke callbacks on all packets on purge. Set length to 0, this way callers can detect that this happened and re-queue if necessary. Cc: qemu-stable@nongnu.org Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-04net: Forbid dealing with packets when VM is not runningzhanghailiang1-0/+7
For all NICs(except virtio-net) emulated by qemu, Such as e1000, rtl8139, pcnet and ne2k_pci, Qemu can still receive packets when VM is not running. If this happened in *migration's* last PAUSE VM stage, but before the end of the migration, the new receiving packets will possibly dirty parts of RAM which has been cached in *iovec*(will be sent asynchronously) and dirty parts of new RAM which will be missed. This will lead serious network fault in VM. To avoid this, we forbid receiving packets in generic net code when VM is not running. Bug reproduction steps: (1) Start a VM which configured at least one NIC (2) In VM, open several Terminal and do *Ping IP -i 0.1* (3) Migrate the VM repeatedly between two Hosts And the *PING* command in VM will very likely fail with message: 'Destination HOST Unreachable', the NIC in VM will stay unavailable unless you run 'service network restart' Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-02slirp: Honour vlan/stack in hostfwd_remove commandsPeter Maydell1-2/+1
The hostfwd_add and hostfwd_remove monitor commands allow the user to optionally specify a vlan/stack tuple. hostfwd_add honours this, but hostfwd_remove does not (it looks up the tuple but then ignores the SlirpState it has looked up and always uses the first stack in the list anyway). Correct this to honour what the user requested. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-01tap-bsd: implement a FreeBSD only version of tap_openRoger Pau Monne1-1/+69
The current behaviour of tap_open for BSD systems differ greatly from it's Linux counterpart. Since FreeBSD supports interface renaming and tap device cloning by opening /dev/tap, implement a FreeBSD specific version of tap_open that behaves like it's Linux counterpart. This is specially important for toolstacks that use Qemu (like Xen libxl), in order to have a unified behaviour across suported platforms. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-18slirp: Give error message if hostfwd_add/remove for unrecognized vlan/stackPeter Maydell1-0/+1
If the user specified a (vlan ID, slirp stack name) tuple in a monitor hostfwd_add/remove command and we can't find it, give the user an error message rather than silently doing nothing. This brings this error case in slirp_lookup() into line with the other two. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-01net: add mmsghdr struct check for L2TPV3Gonglei2-3/+3
The mmsghdr struct is only introduced in Linux 2.6.32; add a configure check for it and disable L2TPV3 on hosts which are too old to provide it, rather than simply failing to compile. Reported-by: chenliang <chenliang88@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1404219488-11196-1-git-send-email-arei.gonglei@huawei.com [PMM: cleaned up commit message and corrected kernel version number] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-27net: move queue number into NICPeersJiri Pirko1-2/+2
It indicates the number of elements in ncs field and makes sense to have int inside NICPeers. Also in parse_netdev we do not need to access container and work with NICPeers only. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-27net: L2TPv3 transportAnton Ivanov4-0/+766
This transport allows to connect a QEMU nic to a static Ethernet over L2TPv3 tunnel. The transport supports all options present in the Linux kernel implementation. It allows QEMU to connect to any Linux host running kernel 3.3+, most routers and network devices as well as other QEMU instances. [Fixed up net_client_init1() switch statement to support -netdev --Stefan] Signed-off-by: Anton Ivanov <antivano@cisco.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-19Add the vhost-user netdev backend to the command lineNikolay Nikolaev3-3/+114
The supplied chardev id will be inspected for supported options. Only a socket backend, with a set path (i.e. a Unix socket) and optionally the server parameter set, will be allowed. Other options (nowait, telnet) will make the chardev unusable and the netdev will not be initialised. Additional checks for validity: - requires `-numa node,memdev=..` - requires `-device virtio-net-*` The `vhostforce` option is used to force vhost-net when we deal with non-MSIX guests. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-19Add new vhost-user netdev backendNikolay Nikolaev3-1/+159
Add a new QEMU netdev backend that is intended to invoke vhost_net with the vhost-user backend. It uses an Unix socket chardev to establish a communication with the 'slave' (client and server mode supported). At runtime the netdev will handle OPEN/CLOSE events from the chardev. Upon disconnection it will set link_down accordingly and notify virtio-net; the virtio-net interface will go down. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Add vhost-backend and VhostBackendTypeNikolay Nikolaev1-0/+1
Use vhost_set_backend_type to initialise a proper vhost_ops structure. In vhost_net_init and vhost_net_start_one call conditionally TAP related initialisation depending on the vhost backend type. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19vhost_net_init will use VhostNetOptions to get all its argumentsNikolay Nikolaev1-4/+13
vhost_dev_init will replace devfd and devpath with a single opaque argument. This is initialised with a file descriptor. When TAP is used (through vhost_net), open /dev/vhost-net and pass the fd as an opaque parameter in VhostNetOptions. The same applies to vhost-scsi - open /dev/vhost-scsi and pass the fd. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-11net: Export valid host network devices listHani Benhabiles1-14/+20
Signed-off-by: Hani Benhabiles <hani@linux.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15monitor: Add set_link arguments completion.Hani Benhabiles1-1/+1
Make it possible to query all net clients without specifying an ID when calling qemu_find_net_clients_except(). This also adds the add_completion_option() function which is to be used for other commands completions as well. Signed-off-by: Hani Benhabiles <hani@linux.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-28Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-04-28' ↵Peter Maydell1-0/+2
into staging trivial patches for 2014-04-28 # gpg: Signature made Mon 28 Apr 2014 05:56:01 BST using RSA key ID A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514 66A7 BEE5 9D74 A4C3 D7DB * remotes/mjt/tags/trivial-patches-2014-04-28: slirp/smb: Move ncalrpc directory to tmp po: add proper Language: tags to .po files po/Makefile: fix $SRC_PATH reference init_paths: fix minor memory leak virtfs-proxy-helper: fix call to accept net/net.c: remove unnecessary semicolon Add QEMU logo (SVG file) vl: avoid closing stdout with 'writeconfig' xilinx: Fix typo in comment (Marvel -> Marvell) vl: Eliminate a superfluous local variable vl: Remove useless 'continue' gitignore: cleanups #2 tests/.gitignore: Ignore test-rfifolock move test-* from .gitignore to tests/.gitignore configure: Improve help behavior vl: convert -m to QemuOpts qemu-option: introduce qemu_find_opts_singleton misc: Use cpu_physical_memory_read and cpu_physical_memory_write Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-04-28slirp/smb: Move ncalrpc directory to tmpMichael Buesch1-0/+2
The smbd forked by qemu still uses the default ncalrpc directory in /var/run/samba. This may lead to problems, if /var/run/samba does not exist (for example if /var/run is a tmpfs and the host smbd was not started). This leads to the following error message from samba and an unworkable smbd: Failed to create pipe directory /var/run/samba/ncalrpc - No such file or directory Fix this by pointing smbd to /tmp/qemu-smb.%d.%d/ncalrpc as ncalrpc directory. Smbd will create the actual ncalrpc subdirectory on its own. Signed-off-by: Michael Buesch <m@bues.ch> Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Applying this to -trivial because it _is_ rather trivial and because Jan does not reply for months)
2014-04-28net/net.c: remove unnecessary semicolonIgor Ryzhov1-1/+1
Signed-off-by: Igor Ryzhov <iryzhov@arccn.ru> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-04-25net: Don't use error_is_set() to suppress additional errorsMarkus Armbruster1-3/+3
Using error_is_set(errp) that way can sweep programming errors under the carpet when we get called incorrectly with an error set. qmp_query_rx_filter() breaks its loop when it detects an error. It needs to set another error when the loop completes normally. Return right away instead of merely breaking the loop. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-25net: Make qmp_query_rx_filter() with name argument more obviousMarkus Armbruster1-0/+4
With a client name, the QMP command is specified to return a list of one element. This isn't locally obvious in the code. Make it so. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-25net/net.c: Remove unnecessary semicolonIgor Ryzhov1-1/+1
Signed-off-by: Igor Ryzhov <iryzhov@arccn.ru> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-25tap: Avoid extra iterations while closing file fdPankaj Gupta1-10/+4
Avoid iterations for fd 0, 1 & 2 when we are closing file fds in child process. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-18net: Report error when device / hub combo is not found.Hani Benhabiles1-1/+3
Also convert nearby monitor_printf() call to error_report(). Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-03-25net: netmap_poll must update both read/write poll statePrasad Joshi1-2/+2
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-12Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into ↵Peter Maydell1-2/+5
staging Net patches # gpg: Signature made Wed 12 Mar 2014 13:48:20 GMT using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/net-pull-request: tap: avoid deadlocking rx Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-12tap: avoid deadlocking rxStefan Hajnoczi1-2/+5
The net subsystem has a control flow mechanism so peer NetClientStates can tell each other to stop sending packets. This is used to stop monitoring the tap file descriptor for incoming packets if the guest rx ring has no spare buffers. There is a corner case when tap_can_send() is true at the beginning of an event loop iteration but becomes false before the tap_send() fd handler is invoked. tap_send() will read the packet from the tap file descriptor and attempt to send it. The net queue will hold on to the packet and return 0, indicating that further I/O is not possible. tap then stops monitoring the file descriptor for reads. This is unlike the normal case where tap_can_send() is the same before and during the event loop iteration. The event loop would simply not monitor the file descriptor if tap_can_send() returns true. Upon next iteration it would check tap_can_send() again and begin monitoring if we can send. The deadlock happens because tap_send() explicitly disabled read_poll. This is done with the expectation that the peer will call qemu_net_queue_flush(). But hw/net/virtio-net.c does not monitor vm_running transitions and issue the flush. Hence we're left with a broken tap device. Cc: qemu-stable@nongnu.org Reported-by: Neil Skrypuch <neil@tembosocial.com> Tested-by: Neil Skrypuch <neil@tembosocial.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-12slirp smb with modern win guests when samba is also running on hostMichael Tokarev1-1/+2
After numerous reports that -smb (or -netdev user,smb=foo) not working with modern windows (win7 and vista are reported as non-working), I started digging myself. And found that indeed it doesn't work, and why. The thing is that modern win tries to connect to port 445 (microsoft-ds) first, and if that fails, it falls back to old port 139 (netbios-ssn). slirp code in qemu only redirects port 139, it does not touch port 445. So the prob is that if samba is also running on the host, guest will try to communicate using port 445, and that will succed, but ofcourse guest will not talk with our samba but with samba running on the host. If samba is not running on the host, guest will fall back to port 139, and will reach the redirecting rule and qemu will spawn smbd correctly. The solution is to redirect both ports (139 and 445), and the fix is a one-liner, adding second call to slirp_add_exec() at the end of net/slirp.c:slirp_smb() function (provided below). But it looks like that is not a proper fix really, since in theory we should redirect both ports to the SAME, single samba instance, but I'm not sure this is possible with slirp. Well, even if two smbd processes will be run on the same config dir, it should not be a problem. The one-liner (not exactly 1 since it touches previous line too) is like this: Signed-off-By: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2014-03-12qemu/slirp: Fix SMB security configuration on newer samba versionsMichael Buesch1-1/+2
The smb.conf automatically generated by qemu's -smb option fails on current samba, because smbd rejects the security=share option with the following warning: > WARNING: Ignoring invalid value 'share' for parameter 'security' Which makes it fall back to security=user without guest login. This results in being unable to login to the samba server from the guest OS. This fixes it by selecting 'user' explicitly and mapping unknown users to guest logins. Signed-off-by: Michael Buesch <m@bues.ch> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2014-02-25net: remove implicit peer from offload APIStefan Hajnoczi1-18/+18
The virtio_net offload APIs are used on the NIC's peer (i.e. the tap device). The API was defined to implicitly use nc->peer, saving the caller the trouble. This wasn't ideal because: 1. There are callers who have the peer but not the NIC. Currently they are forced to bypass the API and access peer->info->... directly. 2. The rest of the net.h API uses nc, not nc->peer, so it is inconsistent. This patch pushes nc->peer back up to callers. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25net: Disable netmap backend when not supportedVincenzo Maffione1-42/+13
This patch fixes configure so that the netmap backend is not compiled in if the host doesn't support an API version >= 11. A version upper bound (15) has been added so that the netmap API can be extended with some minor features without requiring QEMU code modifications. Moreover, some changes have been done to net/netmap.c in order to reflect the current netmap API/ABI (11). The NETMAP_WITH_LIBS macro makes possible to include some utilities (e.g. netmap ring macros, D(), RD() and other high level functions) through the netmap headers. In this way we get rid of the D and RD macro definitions in the QEMU code, and we open the way for further code simplifications that will be introduced by future patches. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25net: add offloading support to netmap backendVincenzo Maffione1-1/+67
Whit this patch, the netmap backend supports TSO/UFO/CSUM offloadings, and accepts the virtio-net header, similarly to what happens with TAP. The offloading callbacks in the NetClientInfo interface have been implemented. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25net: make tap offloading callbacks staticVincenzo Maffione2-12/+12
Since TAP offloadings are manipulated through a new API, it's not necessary to export them in include/net/tap.h anymore. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25net: TAP uses NetClientInfo offloading callbacksVincenzo Maffione2-43/+55
The TAP NetClientInfo structure is inizialized with the TAP-specific functions that manipulates offloading features. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25net: extend NetClientInfo for offloadingVincenzo Maffione1-0/+55
Some new callbacks have been added to generalize the operations done by virtio-net and vmxnet3 frontends to manipulate TAP offloadings. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25net: change vnet-hdr TAP prototypesVincenzo Maffione2-7/+7
The tap_has_vnet_hdr() and tap_has_vnet_hdr_len() functions used to return int, even though they only return true/false values. This patch changes the prototypes to return bool. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-17Use error_is_set() only when necessaryMarkus Armbruster1-6/+6
error_is_set(&var) is the same as var != NULL, but it takes whole-program analysis to figure that out. Unnecessarily hard for optimizers, static checkers, and human readers. Dumb it down to obvious. Gets rid of several dozen Coverity false positives. Note that the obvious form is already used in many places. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-27tap-linux: Get features once and use it many timesKusanagi Kouichi1-6/+8
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-01-27net: Use g_strdup_printf instead of snprintf.Hani Benhabiles1-4/+1
assign_name() in net/net.c is using snprintf + g_strdup to get the same result as g_strdup_printf. Signed-off-by: Hani Benhabiles <kroosec@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-23misc: Use macro ARRAY_SIZE where possibleStefan Weil1-1/+1
This improves readability and simplifies the code. Cc: Anthony Liguori <aliguori@amazon.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-09net: Update netdev peer on link changeVlad Yasevich1-9/+17
When a link change occurs on a backend (like tap), we currently do not propage such change to the nic. As a result, when someone turns off a link on a tap device, for instance, then a guest doesn't see that change and continues to try to send traffic or run DHCP even though the lower-layer is disconnected. This is OK when the network is set up as a HUB since the the guest may be connected to other HUB ports too, but when it's set up as a netdev, it makes thinkgs worse. The patch addresses this by setting the peers link down only when the peer is not a HUBPORT device. With this patch, in the following config -netdev tap,id=net0 -device e1000,mac=XXXXX,netdev=net0 when net0 link is turned off, the guest e1000 shows lower-layer link down. This allows guests to boot much faster in such configurations. With windows guest, it also allows the network to recover properly since windows will not configure the link-local IPv4 address, and when the link is turned on, the proper address address is configured. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-09net: Adding netmap network backendVincenzo Maffione4-0/+447
This patch adds support for a network backend based on netmap. netmap is a framework for high speed packet I/O. You can use it to build extremely fast traffic generators, monitors, software switches or network middleboxes. Its companion software switch VALE lets you interconnect virtual machines. netmap and VALE are implemented as a non-intrusive kernel module, support NICs from multiple vendors, are part of standard FreeBSD distributions and available in source format for Linux too. To compile QEMU with netmap support, use the following configure options: ./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys where "/path/to/netmap" contains the netmap source code, available at http://info.iet.unipi.it/~luigi/netmap/ The same webpage contains more information about the netmap project (together with papers and presentations). Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-08net: fix qemu_flush_queued_packets() in presence of a hubSergey Fedorov1-1/+0
Do not return after net_hub_flush(). Always flush callee network client incoming queue. Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-08net: disallow to specify multicast MAC addressDmitry Krivenok1-0/+6
[Assigning a multicast MAC address to a NIC leads to confusing behavior. Reject multicast MAC addresses so users are alerted to their error straight away. The "net/eth.h" in6_addr rename prevents a name collision with <netinet/in.h> on Linux. -- Stefan] Signed-off-by: Dmitry V. Krivenok <krivenok.dmitry@gmail.com> Reviewed-by: Amos Kong <kongjianjun@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-10-02net: call socket_set_fast_reuse instead of setting SO_REUSEADDRSebastian Ottlik1-9/+10
SO_REUSEADDR should be avoided on Windows but is desired on other operating systems. So instead of setting it we call socket_set_fast_reuse that will result in the appropriate behaviour on all operating systems. An exception to this rule are multicast sockets where it is sensible to have multiple sockets listen on the same ip and port and we should set SO_REUSEADDR on windows. Signed-off-by: Sebastian Ottlik <ottlik@fzi.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2013-09-06net: Rename send_queue to incoming_queueJan Kiszka2-8/+8
Each networking client has a queue for packets that could not yet be delivered to that client. Calling this queue "send_queue" is highly confusing as it has nothing to to with packets send from this client but to it. Avoid this confusing by renaming it to "incoming_queue". Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06tap: Use numbered tap/tun devices on all *BSD OS'sBrad Smith1-11/+0
The following patch simplifies the *BSD tap/tun code and makes use of numbered tap/tun interfaces on all *BSD OS's. NetBSD has a patch in their pkgsrc tree to make use of this feature and DragonFly also supports this as well. Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22aio / timers: Switch entire codebase to the new timer APIAlex Bligh1-1/+1
This is an autogenerated patch using scripts/switch-timer-api. Switch the entire code base to using the new timer API. Note this patch may introduce some line length issues. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22aio / timers: Untangle include filesAlex Bligh2-0/+2
include/qemu/timer.h has no need to include main-loop.h and doing so causes an issue for the next patch. Unfortunately various files assume including timers.h will pull in main-loop.h. Untangle this mess. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-27misc: Use g_assert_not_reached for code which is expected to be unreachableStefan Weil1-1/+1
The macro g_assert_not_reached is a better self documenting replacement for assert(0) or assert(false). Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
generated by cgit v1.1 at 2024-12-28 15:31:40 +0000