aboutsummaryrefslogtreecommitdiff
path: root/net/tap-solaris.c
AgeCommit message (Collapse)AuthorFilesLines
2022-05-03Replace fcntl(O_NONBLOCK) with g_unix_set_fd_nonblocking()Marc-André Lureau1-1/+1
Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-04-06Remove qemu-common.h include from most unitsMarc-André Lureau1-1/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-04net: Added SetSteeringEBPF method for NetClientState.Andrew Melnychenko1-0/+5
For now, that method supported only by Linux TAP. Linux TAP uses TUNSETSTEERINGEBPF ioctl. Signed-off-by: Andrew Melnychenko <andrew@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-07-15net: detect errors from probing vnet hdr flag for TAP devicesDaniel P. Berrange1-1/+1
When QEMU sets up a tap based network device backend, it mostly ignores errors reported from various ioctl() calls it makes, assuming the TAP file descriptor is valid. This assumption can easily be violated when the user is passing in a pre-opened file descriptor. At best, the ioctls may fail with a -EBADF, but if the user passes in a bogus FD number that happens to clash with a FD number that QEMU has opened internally for another reason, a wide variety of errnos may result, as the TUNGETIFF ioctl number may map to a completely different command on a different type of file. By ignoring all these errors, QEMU sets up a zombie network backend that will never pass any data. Even worse, when QEMU shuts down, or that network backend is hot-removed, it will close this bogus file descriptor, which could belong to another QEMU device backend. There's no obvious guaranteed reliable way to detect that a FD genuinely is a TAP device, as opposed to a UNIX socket, or pipe, or something else. Checking the errno from probing vnet hdr flag though, does catch the big common cases. ie calling TUNGETIFF will return EBADF for an invalid FD, and ENOTTY when FD is a UNIX socket, or pipe which catches accidental collisions with FDs used for stdio, or monitor socket. Previously the example below where bogus fd 9 collides with the FD used for the chardev saw: $ ./x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hostnet0,fd=9 \ -chardev socket,id=charchannel0,path=/tmp/qga,server,nowait \ -monitor stdio -vnc :0 qemu-system-x86_64: -netdev tap,id=hostnet0,fd=9: TUNGETIFF ioctl() failed: Inappropriate ioctl for device TUNSETOFFLOAD ioctl() failed: Bad address QEMU 2.9.1 monitor - type 'help' for more information (qemu) Warning: netdev hostnet0 has no peer which gives a running QEMU with a zombie network backend. With this change applied we get an error message and QEMU immediately exits before carrying on and making a bigger disaster: $ ./x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hostnet0,fd=9 \ -chardev socket,id=charchannel0,path=/tmp/qga,server,nowait \ -monitor stdio -vnc :0 qemu-system-x86_64: -netdev tap,id=hostnet0,vhost=on,fd=9: Unable to query TUNGETIFF on FD 9: Inappropriate ioctl for device Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 20171027085548.3472-1-berrange@redhat.com [lv: to simplify, don't check on EINVAL with TUNGETIFF as it exists since v2.6.27] Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-07-07net/tap-solaris.c: Include qemu-common.h for TFR macroPeter Maydell1-0/+1
In commit a8d2532645cf5ce4 we cleaned up usage of the qemu-common.h header so that it was always included from .c files and never from other .h files. We missed adding it to net/tap-solaris.c (which previously was pulling it in via tap-int.h), which broke building on Solaris hosts. Fixes: a8d2532645cf5ce4 Reported-by: Michele Denber <denber@mindspring.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Michele Denber <denber@mindspring.com> Message-Id: <20200704092317.12943-1-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-08-16Clean up inclusion of sysemu/sysemu.hMarkus Armbruster1-1/+0
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Almost a third of its inclusions are actually superfluous. Delete them. Downgrade two more to qapi/qapi-types-run-state.h, and move one from char/serial.h to char/serial.c. hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and stubs/semihost.c define variables declared in sysemu/sysemu.h without including it. The compiler is cool with that, but include it anyway. This doesn't reduce actual use much, as it's still included into widely included headers. The next commit will tackle that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-27-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-11qemu-common: Move qemu_isalnum() etc. to qemu/ctype.hMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-3-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa1-0/+1
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster1-0/+1
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-04net: Clean up includesPeter Maydell1-1/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-11-git-send-email-peter.maydell@linaro.org
2015-06-19tap: fix non-linux buildMichael S. Tsirkin1-0/+10
tap_fd_set_vnet_le/tap_fd_set_vnet_be was missing, fix it up. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
2015-05-27tap-solaris: Convert tap_open() to ErrorMarkus Armbruster1-29/+30
Fixes inappropriate use of syslog(). Not fixed: leaks on error paths, suspicious non-fatal errors. FIXMEs added instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-14-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Permit incremental conversion of tap_open() to ErrorMarkus Armbruster1-1/+2
Convert the trivial ones immediately: tap-aix and tap-haiku. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-11-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Convert tap_set_sndbuf() to ErrorMarkus Armbruster1-2/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-8-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-01tap: multiqueue supportJason Wang1-1/+2
Recently, linux support multiqueue tap which could let userspace call TUNSETIFF for a signle device many times to create multiple file descriptors as independent queues. User could also enable/disabe a specific queue through TUNSETQUEUE. The patch adds the generic infrastructure to create multiqueue taps. To achieve this a new parameter "queues" were introduced to specify how many queues were expected to be created for tap by qemu itself. Alternatively, management could also pass multiple pre-created tap file descriptors separated with ':' through a new parameter fds like -netdev tap,id=hn0,fds="X:Y:..:Z". Multiple vhost file descriptors could also be passed in this way. Each TAPState were still associated to a tap fd, which mean multiple TAPStates were created when user needs multiqueue taps. Since each TAPState contains one NetClientState, with the multiqueue nic support, an N peers of NetClientState were built up. A new parameter, mq_required were introduce in tap_open() to create multiqueue tap fds. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01tap: introduce a helper to get the name of an interfaceJason Wang1-0/+4
This patch introduces a helper tap_get_ifname() to get the device name of tap device. This is needed when ifname is unspecified in the command line and qemu were asked to create tap device by itself. In this situation, the name were allocated by kernel, so if multiqueue is asked, we need to fetch its name after creating the first queue. Only linux has this support since it's the only platform that supports multiqueue tap. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01tap: add Linux multiqueue supportJason Wang1-0/+11
This patch add basic multiqueue support for Linux. When multiqueue is needed, we will first check whether kernel support multiqueue tap before creating more queues. Two new functions tap_fd_enable() and tap_fd_disable() were introduced to enable and disable a specific queue. Since the multiqueue is only supported in Linux, return error on other platforms. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19net: reorganize headersPaolo Bonzini1-1/+1
Move public headers to include/net, and leave private headers in net/. Put the virtio headers in include/net/tap.h, removing the multiple copies that existed. Leave include/net/tap.h as the interface for NICs, and net/tap_int.h as the interface for OS-specific parts of the tap backend. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-23convert net_init_tap() to NetClientOptionsLaszlo Ersek1-1/+1
Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06fix typo: delete redundant semicolonDong Xu Wang1-1/+1
Double semicolons should be single. Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-09-07tap: add APIs for vnet header lengthMichael S. Tsirkin1-0/+9
Add APIs to control host header length. First user will be vhost-net. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-31Fix a warning on OpenSolarisBlue Swirl1-0/+1
Add a missing #include statement to avoid a warning: /src/qemu/net/tap-solaris.c: In function 'tap_open': /src/qemu/net/tap-solaris.c:189: warning: implicit declaration of function 'error_report' Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-16error: Replace qemu_error() by error_report()Markus Armbruster1-2/+2
error_report() terminates the message with a newline. Strip it it from its arguments. This fixes a few error messages lacking a newline: net_handle_fd_param()'s "No file descriptor named %s found", and tap_open()'s "vnet_hdr=1 requested, but no kernel support for IFF_VNET_HDR available" (all three versions). There's one place that passes arguments without newlines intentionally: load_vmstate(). Fix it up.
2009-12-13tap: Compilation fix for SolarisAndreas Färber1-0/+1
Avoid an unresolved symbol error for TFR, which is defined in sysemu.h. Based on patch by Palle Lyckegaard. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Palle Lyckegaard <palle@lyckegaard.dk> Cc: Ben Taylor <bentaylor.solx86@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-03net: fix vnet_hdr handling in solaris tap codeMark McLoughlin1-0/+11
Print an error if the user specifies vnet_hdr=1 on the cmdline. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30net: move UFO support detection to tap-linux.cMark McLoughlin1-0/+5
Only supported on Linux Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30net: move tap_set_offload() code into tap-linux.cMark McLoughlin1-0/+5
TUNSETOFFLOAD is only available on Linux Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30net: move tap_probe_vnet_hdr() to tap-linux.cMark McLoughlin1-0/+5
Only Linux has support for IFF_VNET_HDR Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30net: move tap_set_sndbuf() to tap-linux.cMark McLoughlin1-0/+5
TUNSETSNDBUF is only available on linux Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30net: move solaris code to net/tap-solaris.cMark McLoughlin1-0/+185
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>