aboutsummaryrefslogtreecommitdiff
path: root/net/slirp.c
AgeCommit message (Collapse)AuthorFilesLines
2019-05-17net/slirp: fix the IPv6 prefix length error messageStefano Garzarella1-1/+2
Reword and add a missing parentheses at the end of the error message. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-03-07build-sys: link with slirp as an external projectMarc-André Lureau1-1/+1
Use the "system" libslirp if its present or requested. Else build with a static libslirp.a if slirp/ is checked out ("internal") or a submodule ("git"). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190212162524.31504-7-marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-03-07slirp: move sources to src/ subdirectoryMarc-André Lureau1-1/+1
Prepare for making slirp/ a standalone project. Remove some useless includes while at it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190212162524.31504-5-marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-03-07slirp: use libslirp migration codeMarc-André Lureau1-0/+55
slirp migration code uses QEMU vmstate so far, when building WITH_QEMU. Introduce slirp_state_{load,save,version}() functions to move the state saving handling to libslirp side. So far, the bitstream compatibility should remain equal with current QEMU, as this is effectively using the same code, with the same format etc. When libslirp is made standalone, we will need some mechanism to ensure bitstream compatibility regardless of the libslirp version installed. See the FIXME note in the code. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190212162524.31504-3-marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-03-06slirp: Mark pieces missing IPv6 supportSamuel Thibault1-0/+1
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-02-13char: allow specifying a GMainContext at opening timePaolo Bonzini1-1/+1
This will be needed by vhost-user-test, when each test switches to its own GMainLoop and GMainContext. Otherwise, for a reconnecting socket the initial connection will happen on the default GMainContext, and no one will be listening on it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190202110834.24880-1-pbonzini@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-02-07slirp: pass opaque to all callbacksMarc-André Lureau1-9/+16
This is friendlier for FFI bindings. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-02-07slirp: use polling callbacks, drop glib requirementMarc-André Lureau1-3/+69
It would be legitimate to use libslirp without glib. Let's add_poll/get_revents pair of callbacks to provide the same functionality. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-02-07slirp: replace global polling with per-instance & notifierMarc-André Lureau1-0/+24
Remove hard-coded dependency on slirp in main-loop, and use a "poll" notifier instead. The notifier is registered per slirp instance. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-02-07slirp: improve send_packet() callbackMarc-André Lureau1-4/+5
Use a more descriptive name for the callback. Reuse the SlirpWriteCb type. Wrap it to check that all data has been written. Return a ssize_t for potential error handling and data-loss reporting. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-02-07slirp: replace qemu_notify_event() with a callbackMarc-André Lureau1-0/+1
Introduce a SlirpCb callback to kick the main io-thread. Add an intermediary sodrop() function that will call SlirpCb.notify callback when sbdrop() returns true. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-02-07slirp: add unregister_poll_fd() callbackMarc-André Lureau1-0/+6
Add a counter-part to register_poll_fd() for completeness. (so far, register_poll_fd() is called only on struct socket fd) Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-02-07slirp: replace qemu_set_nonblock()Marc-André Lureau1-0/+6
Replace qemu_set_nonblock() with slirp_set_nonblock() qemu_set_nonblock() does some event registration with the main loop. Add a new callback register_poll_fd() for that reason. Always build the fd-register stub, to avoid #if WIN32. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-02-07slirp: add callbacks for timerMarc-André Lureau1-0/+21
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-02-07net/slirp: fix leaks on forwarding rule registration errorMarc-André Lureau1-0/+2
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-02-07net/slirp: free forwarding rules on cleanupMarc-André Lureau1-7/+18
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-02-07net/slirp: simplify checking for cmd: prefixMarc-André Lureau1-1/+1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-02-07slirp: generalize guestfwd with a callback based approachMarc-André Lureau1-4/+10
Instead of calling into QEMU chardev directly, and mixing it with slirp_add_exec() handling, add a new function slirp_add_guestfwd() which takes a write callback. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-01-14slirp: add clock_get_ns() callbackMarc-André Lureau1-0/+6
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-01-14slirp: drop <Vista compatibilityMarc-André Lureau1-22/+0
Since commit 12f8def0e02232d7c6416ad9b66640f973c531d1 (v2.9), qemu requires Vista. Let's remove some conditional code. Note that this introduces a missing declaration warning with mingw. warning: implicit declaration of function 'inet_ntop' See also: https://sourceforge.net/p/mingw-w64/mailman/message/36473782/ We could workaround it by declaring it ourself depending on __MINGW64_VERSION_*: WINSOCK_API_LINKAGE INT WSAAPI inet_pton(int Family, PCTSTR pszAddrString, PVOID pAddrBuf); Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-01-14net: do not depend on slirp internalsMarc-André Lureau1-1/+1
Only slirp/libslirp.h should be included. Instead of using some slirp declarations and utility functions directly, let's copy them in net/util.h. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-01-14slirp: add a callback to log guest errorsMarc-André Lureau1-0/+7
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-01-14slirp: use a callback structure to interface with qemuMarc-André Lureau1-1/+5
This will bring slirp a bit forward to the state of an independent project. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-01-14slirp: remove Monitor dependency, return a string for infoMarc-André Lureau1-3/+4
There is nothing performance-sensitive in returning an allocated string for info, and handling the monitor_printf() on the caller side. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-01-14slirp: use a dedicated field for chardev pointerMarc-André Lureau1-4/+4
Let's not mix command line and chardev pointers. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-01-14slirp: associate slirp_output callback with the Slirp contextMarc-André Lureau1-2/+3
Let's make the slirp interface a bit more library-like. Associate the slirp_output() with a Slirp context. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-01-11qemu/queue.h: leave head structs anonymous unless necessaryPaolo Bonzini1-1/+1
Most list head structs need not be given a name. In most cases the name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV or reverse iteration, but this does not apply to lists of other kinds, and even for QTAILQ in practice this is only rarely needed. In addition, we will soon reimplement those macros completely so that they do not need a name for the head struct. So clean up everything, not giving a name except in the rare case where it is necessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-21slirp: Implement RFC2132 TFTP server nameFam Zheng1-2/+10
This new usernet option can be used to add data for option 66 (tftp server name) in the BOOTP reply, which is useful in PXE based automatic OS install such as OpenBSD. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2018-10-21slirp: Add sanity check for str option lengthFam Zheng1-0/+9
When user provides a long domainname or hostname that doesn't fit in the DHCP packet, we mustn't overflow the response packet buffer. Instead, report errors, following the g_warning() in the slirp->vdnssearch branch. Also check the strlen against 256 when initializing slirp, which limit is also from the protocol where one byte represents the string length. This gives an early error before the warning which is harder to notice or diagnose. Reported-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Fam Zheng <famz@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2018-10-03chardev: mark the calls that allow an implicit mux monitorMarc-André Lureau1-1/+5
This is mostly for readability of the code. Let's make it clear which callers can create an implicit monitor when the chardev is muxed. This will also enforce a safer behaviour, as we don't really support creating monitor anywhere/anytime at the moment. Add an assert() to make sure the programmer explicitely wanted that behaviour. There are documented cases, such as: -serial/-parallel/-virtioconsole and to less extent -debugcon. Less obvious and questionable ones are -gdb, SLIRP -guestfwd and Xen console. Add a FIXME note for those, but keep the support for now. Other qemu_chr_new() callers either have a fixed parameter/filename string or do not need it, such as -qtest: * qtest.c: qtest_init() Afaik, only used by tests/libqtest.c, without mux. I don't think we support it outside of qemu testing: drop support for implicit mux monitor (qemu_chr_new() call: no implicit mux now). * hw/ All with literal @filename argument that doesn't enable mux monitor. * tests/ All with @filename argument that doesn't enable mux monitor. On a related note, the list of monitor creation places: - the chardev creators listed above: all from command line (except perhaps Xen console?) - -gdb & hmp gdbserver will create a "GDB monitor command" chardev that is wired to an HMP monitor. - -mon command line option From this short study, I would like to think that a monitor may only be created in the main thread today, though I remain skeptical :) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-09-25net/slirp: Deprecate the [hub_id name] parameter tupleThomas Huth1-0/+2
The "name" in the [hub_id name] parameter tuple is the same as a "netdev_id" (which should be unique), so specifying the hub_id here is just redundant (it was likely just necessary in the past when the network subsystem was still using "vlans" only and when it did not use unique "id"s yet). Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-08-31net: Remove the deprecated -tftp, -bootp, -redir and -smb optionsThomas Huth1-103/+29
These options likely do not work as expected as soon as the user tries to use more than one network interface at once. The parameters have been marked as deprecated since QEMU v2.6, so users had plenty of time to move their scripts to the new syntax. Time to remove the old parameters now. Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Acked-by: Peter Krempa <pkrempa@redhat.com> Acked-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-31net/slirp: Convert atoi to qemu_strtoi to allow error checkingNia Alarie1-1/+3
Signed-off-by: Nia Alarie <nia.alarie@gmail.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2018-05-31slirp: Add domainname option to slirp's DHCP serverBenjamin Drung1-3/+9
This patch will allow the user to include the domainname option in replies from the built-in DHCP server. Signed-off-by: Benjamin Drung <benjamin.drung@profitbricks.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2018-05-14net: Get rid of 'vlan' terminology and use 'hub' instead in the source filesThomas Huth1-4/+4
'vlan' is very confusing since it does not mean something like IEEE 802.1Q, but rather emulated hubs, so let's switch to that terminology instead. Buglink: https://bugs.launchpad.net/qemu/+bug/658904 Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-02-09Include qapi/qmp/qdict.h exactly where neededMarkus Armbruster1-0/+2
This cleanup makes the number of objects depending on qapi/qmp/qdict.h drop from 4550 (out of 4743) to 368 in my "build everything" tree. For qapi/qmp/qobject.h, the number drops from 4552 to 390. While there, separate #include from file comment with a blank line. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-01-29net: Allow netdevs to be used with 'hostfwd_add' and 'hostfwd_remove'Thomas Huth1-10/+23
It does not make much sense to limit these commands to the legacy 'vlan' concept only, they should work with the modern netdevs, too. So now it is possible to use this command with one, two or three parameters. With one parameter, the command installs a hostfwd rule on the default "user" network: hostfwd_add tcp:... With two parameters, the command installs a hostfwd rule on a netdev (that's the new way of using this command): hostfwd_add netdev_id tcp:... With three parameters, the command installs a rule on a 'vlan' (aka hub): hostfwd_add hub_id name tcp:... Same applies to the hostfwd_remove command now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-22net: Remove the legacy "-net channel" parameterThomas Huth1-34/+0
It has never been documented, so hardly anybody knows about this parameter, and it is marked as deprecated since QEMU v2.6. Time to let it go now. Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-24slirp: Add explanation for hostfwd parsing failureDr. David Alan Gilbert1-1/+12
e.g. ./x86_64-softmmu/qemu-system-x86_64 -nographic -netdev 'user,id=vnet,hostfwd=:555.0.0.0:0-:22' qemu-system-x86_64: -netdev user,id=vnet,hostfwd=:555.0.0.0:0-:22: Invalid host forwarding rule ':555.0.0.0:0-:22' (Bad host address) Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-08-03slirp: fill error when failing to initialize user networkHervé Poussineau1-40/+94
With "-netdev user,id=net0,dns=1.2.3.4" error was: qemu-system-i386: -netdev user,id=net0,dns=1.2.3.4: Device 'user' could not be initialized Error is now: qemu-system-i386: -netdev user,id=net0,dns=1.2.3.4: DNS doesn't belong to network Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-07-14char: add backend hotswap handlerAnton Nefedov1-1/+1
Frontends should have an interface to setup the handler of a backend change. The interface will be used in the next commits Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1499342940-56739-3-git-send-email-anton.nefedov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-02char: move CharBackend handling in char-fe unitMarc-André Lureau1-1/+1
Move all the frontend struct and methods to a seperate unit. This avoids accidentally mixing backend and frontend calls, and helps with readabilty. Make qemu_chr_replay() a macro shared by both char and char-fe. Export qemu_chr_write(), and use a macro for qemu_chr_write_all() (nb: yes, CharBackend is for char frontend :) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02chardev: move headers to include/chardevMarc-André Lureau1-1/+1
So they are all in one place. The following patch will move serial & parallel declarations to the respective headers. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-04-29slirp/smb: Replace constant strings by glib stringDr. David Alan Gilbert1-13/+17
gcc 7 (on fedora 26) objects to many of the snprintf's in the smb path and command creation because it can't figure out that the smb_dir (i.e. the /tmp dir for the configuration) is known to be short. Replace all these fixed length buffers by g_str* functions that dynamically allocate and use g_dir_make_tmp to make the directory. (It's fairly new glib but we have a compat function for it). Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: allow host port 0 for hostfwdVincent Bernat1-1/+1
The OS will allocate automatically a free port. This is useful if you want to be sure to not get any port conflict. You still have to figure out which port you got, for example with "lsof" (this could be exposed in the monitor if needed). Example of use: $ qemu-system-x86_64 -net user,hostfwd=127.0.0.1:0-:22 ... Then, get your port with: $ lsof -np 1474 | grep LISTEN qemu-syst 31777 bernat 12u IPv4 [...] TCP 127.0.0.1:35145 (LISTEN) Signed-off-by: Vincent Bernat <vincent@bernat.im> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-01-27char: rename CharDriverState ChardevMarc-André Lureau1-1/+1
Pick a uniform chardev type name. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-02slirp: fix CharDriver breakagePaolo Bonzini1-2/+1
SLIRP expects a CharBackend as the third argument to slirp_add_exec, but net/slirp.c was passing a CharDriverState. Fix this to restore guestfwd functionality. Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: remove explicit_fe_open, use a set_handlers argumentMarc-André Lureau1-1/+1
No need to keep explicit_fe_open around if it affects only a qemu_chr_fe_set_handlers(). Use an additional argument instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: replace qemu_chr_claim/release with qemu_chr_fe_init/deinitMarc-André Lureau1-1/+0
Now that all front end use qemu_chr_fe_init(), we can move chardev claiming in init(), and add a function deinit() to release the chardev and cleanup handlers. The qemu_chr_fe_claim_no_fail() for property are gone, since the property will raise an error instead. In other cases, where there is already an error path, an error is raised instead. Finally, other cases are handled by &error_abort in qemu_chr_fe_init(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: use qemu_chr_fe* functions with CharBackend argumentMarc-André Lureau1-3/+4
This also switches from qemu_chr_add_handlers() to qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now takes the focus when fe_open (qemu_chr_add_handlers() did take the focus) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-10-02 01:07:29 +0000