aboutsummaryrefslogtreecommitdiff
path: root/net/net.c
AgeCommit message (Collapse)AuthorFilesLines
2018-12-04net: drop too large packet earlyJason Wang1-11/+17
We try to detect and drop too large packet (>INT_MAX) in 1592a9947036 ("net: ignore packet size greater than INT_MAX") during packet delivering. Unfortunately, this is not sufficient as we may hit another integer overflow when trying to queue such large packet in qemu_net_queue_append_iov(): - size of the allocation may overflow on 32bit - packet->size is integer which may overflow even on 64bit Fixing this by moving the check to qemu_sendv_packet_async() which is the entrance of all networking codes and reduce the limit to NET_BUFSIZE to be more conservative. This works since: - For the callers that call qemu_sendv_packet_async() directly, they only care about if zero is returned to determine whether to prevent the source from producing more packets. A callback will be triggered if peer can accept more then source could be enabled. This is usually used by high speed networking implementation like virtio-net or netmap. - For the callers that call qemu_sendv_packet() that calls qemu_sendv_packet_async() indirectly, they often ignore the return value. In this case qemu will just the drop packets if peer can't receive. Qemu will copy the packet if it was queued. So it was safe for both kinds of the callers to assume the packet was sent. Since we move the check from qemu_deliver_packet_iov() to qemu_sendv_packet_async(), it would be safer to make qemu_deliver_packet_iov() static to prevent any external user in the future. This is a revised patch of CVE-2018-17963. Cc: qemu-stable@nongnu.org Cc: Li Qiang <liq3ea@163.com> Fixes: 1592a9947036 ("net: ignore packet size greater than INT_MAX") Reported-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20181204035347.6148-2-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-19net: ignore packet size greater than INT_MAXJason Wang1-1/+6
There should not be a reason for passing a packet size greater than INT_MAX. It's usually a hint of bug somewhere, so ignore packet size greater than INT_MAX in qemu_deliver_packet_iov() CC: qemu-stable@nongnu.org Reported-by: Daniel Shapira <daniel@twistlock.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-10-19filter: Add handle_event method for NetFilterClassZhang Chen1-0/+19
Filter needs to process the event of checkpoint/failover or other event passed by COLO frame. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-09-25net: Deprecate the "name" parameter of -netThomas Huth1-0/+4
In early times, network backends were specified by a "vlan" and "name" tuple. With the introduction of netdevs, the "name" was replaced by an "id" (which is supposed to be unique), but the "name" parameter stayed as an alias which could be used instead of "id". Unfortunately, we miss the duplication check for "name": $ qemu-system-x86_64 -net user,name=n1 -net user,name=n1 ... starts without an error, while "id" correctly complains: $ qemu-system-x86_64 -net user,id=n1 -net user,id=n1 qemu-system-x86_64: -net user,id=n1: Duplicate ID 'n1' for net Instead of trying to fix the code for the legacy "name" parameter, let's rather get rid of this old interface and deprecate the "name" parameter now - this will also be less confusing for the users in the long run. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-06-15net: Fix a potential segfaultLin Ma1-1/+3
If user forgets to provide any backend types for '-netdev' in qemu CLI, It triggers seg fault. e.g. Expected: $ qemu -netdev id=net0 qemu-system-x86_64: Parameter 'type' is missing Actual: $ qemu -netdev id=net0 Segmentation fault (core dumped) Fixes: 547203ead4327 ("net: List available netdevs with "-netdev help") Reviewed-by: Thomas Huth <thuth@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Lin Ma <lma@suse.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-05-14net: Remove the deprecated "vlan" parameterThomas Huth1-9/+3
It's been marked as deprecated since QEMU v2.9.0, so that should have been enough time for everybody to either just drop unnecessary "vlan=0" parameters, to switch to the modern -device + -netdev syntax for connecting guest NICs with host network backends, or to switch to the "hubport" netdev in case hubs are really wanted instead. Buglink: https://bugs.launchpad.net/qemu/+bug/658904 Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-05-14net: Fix memory leak in net_param_nic()Thomas Huth1-2/+4
The early exits in case of errors leak the memory allocated for nd_id. Fix it by using a "goto out" to the cleanup at the end of the function instead. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-26virtio_net: flush uncompleted TX on resetGreg Kurz1-1/+0
If the backend could not transmit a packet right away for some reason, the packet is queued for asynchronous sending. The corresponding vq element is tracked in the async_tx.elem field of the VirtIONetQueue, for later freeing when the transmission is complete. If a reset happens before completion, virtio_net_tx_complete() will push async_tx.elem back to the guest anyway, and we end up with the inuse flag of the vq being equal to -1. The next call to virtqueue_pop() is then likely to fail with "Virtqueue size exceeded". This can be reproduced easily by starting a guest with an hubport backend that is not connected to a functional network, eg, -device virtio-net-pci,netdev=hub0 -netdev hubport,id=hub0,hubid=0 and no other -netdev hubport,hubid=0 on the command line. The appropriate fix is to ensure that such an asynchronous transmission cannot survive a device reset. So for all queues, we first try to send the packet again, and eventually we purge it if the backend still could not deliver it. CC: qemu-stable@nongnu.org Reported-by: R. Nageswara Sastry <nasastry@in.ibm.com> Buglink: https://github.com/open-power-host-os/qemu/issues/37 Signed-off-by: Greg Kurz <groug@kaod.org> Tested-by: R. Nageswara Sastry <nasastry@in.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell1-123/+116
staging # gpg: Signature made Mon 05 Mar 2018 03:06:59 GMT # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: tap: setting error appropriately when calling net_init_tap_one() hw/net: Remove unnecessary header includes net: Add a new convenience option "--nic" to configure default/on-board NICs net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commands net: Remove the deprecated way of dumping network packets net: Make net_client_init() static net: Only show vhost-user in the help text if CONFIG_POSIX is defined net: List available netdevs with "-netdev help" net: Move error reporting from net_init_client/netdev to the calling site Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-05net: Add a new convenience option "--nic" to configure default/on-board NICsThomas Huth1-0/+78
The legacy "-net" option can be quite confusing for the users since most people do not expect to get a "vlan" hub between their emulated guest hardware and the host backend. But so far, we are also not able to get rid of "-net" completely, since it is the only way to configure on-board NICs that can not be instantiated via "-device" yet. It's also a little bit shorter to type "-net nic -net tap" instead of "-device xyz,netdev=n1 -netdev tap,id=n1". So what we need is a new convenience option that is shorter to type than the full -device + -netdev stuff, and which can be used to configure the on-board NICs that can not be handled via -device yet. Thus this patch now provides such a new option "--nic": It adds an entry in the nd_table to configure a on-board / default NIC, creates a host backend and connects the two directly, without a confusing "vlan" hub inbetween. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commandsThomas Huth1-94/+0
They are deprecated since QEMU v2.10, and so far nobody complained that these commands are still necessary for any reason - and since you can use 'netdev_add' and 'netdev_remove' instead, there also should not be any real reason. Since they are also standing in the way for the upcoming 'vlan' clean-up, it's now time to remove them. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Remove the deprecated way of dumping network packetsThomas Huth1-8/+1
"-net dump" has been marked as deprecated since QEMU v2.10, since it only works with the deprecated 'vlan' parameter (or hubs). Network dumping should be done with "-object filter-dump" nowadays instead. Since nobody complained so far about the deprecation message, let's finally get rid of "-net dump" now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Make net_client_init() staticThomas Huth1-1/+1
The function is only used within net.c, so there's no need that this is a global function. While we're at it, also remove the unused prototype compute_mcast_idx() (the function has been removed in commit d9caeb09b107e91122d10ba4a08a). Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: List available netdevs with "-netdev help"Thomas Huth1-1/+36
Other options like "-chardev" or "-device" feature a nice help text with the available devices when being called with "help" or "?". Since it is quite useful, especially if you want to see which network backends have been compiled into the QEMU binary, let's provide such a help text for "-netdev", too. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05net: Move error reporting from net_init_client/netdev to the calling siteThomas Huth1-24/+5
It looks strange that net_init_client() and net_init_netdev() both take an "Error **errp" parameter, but then do the error reporting with "error_report_err(local_err)" on their own. Let's move the error reporting to the calling site instead to simplify this code a little bit. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster1-2/+2
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster1-1/+1
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09Include qapi/qmp/qdict.h exactly where neededMarkus Armbruster1-0/+1
This cleanup makes the number of objects depending on qapi/qmp/qdict.h drop from 4550 (out of 4743) to 368 in my "build everything" tree. For qapi/qmp/qobject.h, the number drops from 4552 to 390. While there, separate #include from file comment with a blank line. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster1-0/+2
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-01-29net: Allow hubports to connect to other netdevsThomas Huth1-1/+1
QEMU can emulate hubs to connect NICs and netdevs. This is currently primarily used for the mis-named 'vlan' feature of the networking subsystem. Now the 'vlan' feature has been marked as deprecated, since its name is rather confusing and the users often rather mis-configure their network when trying to use it. But while the 'vlan' parameter should be removed at one point in time, the basic idea of emulating a hub in QEMU is still good: It's useful for bundling up the output of multiple NICs into one single l2tp netdev for example. Now to be able to use the hubport feature without 'vlan's, there is one missing piece: The possibility to connect a hubport to a netdev, too. This patch adds this possibility by introducing a new "netdev=..." parameter to the hubports. To bundle up the output of multiple NICs into one socket netdev, you can now run QEMU with these parameters for example: qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \ -netdev hubport,hubid=1,id=h1,netdev=s1 \ -netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \ -netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3 For using the socket netdev, you have got to start another QEMU as the receiving side first, for example with network dumping enabled: qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \ -device ne2k_isa,netdev=s0 \ -object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat After the ppc64 guest tried to boot from both NICs, you can see in the dump file (using Wireshark, for example), that the output of both NICs (the e1000 and the virtio-net-pci) has been successfully transfered via the socket netdev in this case. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-22net: Remove the legacy "-net channel" parameterThomas Huth1-7/+0
It has never been documented, so hardly anybody knows about this parameter, and it is marked as deprecated since QEMU v2.6. Time to let it go now. Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-22net: remove unused compute_mcast_idx() functionMark Cave-Ayland1-5/+0
Now that all of the callers have been converted to compute the multicast index inline using new net CRC functions, this function can now be dropped. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-22net: introduce net_crc32_le() functionMark Cave-Ayland1-0/+22
This provides a standard ethernet CRC32 little-endian implementation. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-22net: move CRC32 calculation from compute_mcast_idx() into its own ↵Mark Cave-Ayland1-5/+11
net_crc32() function Separate out the standard ethernet CRC32 calculation into a new net_crc32() function, renaming the constant POLYNOMIAL to POLYNOMIAL_BE to make it clear that this is a big-endian CRC32 calculation. As part of the constant rename, remove the duplicate definition of POLYNOMIAL from eepro100.c and use the new POLYNOMIAL_BE constant instead. Once this is complete remove the existing CRC32 implementation from compute_mcast_idx() and call the new net_crc32() function in its place. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-19General warn report fixupsAlistair Francis1-2/+3
Tidy up some of the warn_report() messages after having converted them to use warn_report(). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <9cb1d23551898c9c9a5f84da6773e99871285120.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19Convert multi-line fprintf() to warn_report()Alistair Francis1-7/+7
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these commands: find ./* -type f -exec sed -i \ 'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + Indentation fixed up manually afterwards. Some of the lines were manually edited to reduce the line length to below 80 charecters. Some of the lines with newlines in the middle of the string were also manually edit to avoid checkpatch errrors. The #include lines were manually updated to allow the code to compile. Several of the warning messages can be improved after this patch, to keep this patch mechanical this has been moved into a later patch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Alexander Graf <agraf@suse.de> Cc: Jason Wang <jasowang@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-08net/net: Convert parse_host_port() to ErrorMao Zhongyi1-5/+17
Cc: berrange@redhat.com Cc: kraxel@redhat.com Cc: pbonzini@redhat.com Cc: jasowang@redhat.com Cc: armbru@redhat.com Cc: eblake@redhat.com Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-04qapi: Mechanically convert FOO_lookup[...] to FOO_str(...)Markus Armbruster1-2/+2
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503564371-26090-14-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-07-17net/net.c: Add vnet_hdr support in SocketReadStateZhang Chen1-4/+32
We add a flag to decide whether net_fill_rstate() need read the vnet_hdr_len or not. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-07-17net: Add vnet_hdr_len arguments in NetClientStateZhang Chen1-0/+1
Add vnet_hdr_len arguments in NetClientState that make other module get real vnet_hdr_len easily. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-05-23hmp / net: Mark host_net_add/remove as deprecatedThomas Huth1-0/+13
The netdev_add and netdev_del commands should be used nowadays instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-02-22net: Flatten simple union NetLegacyOptionsMarkus Armbruster1-22/+22
Simple unions are simpler than flat unions in the schema, but more complicated in C and on the QMP wire: there's extra indirection in C and extra nesting on the wire, both pointless. They're best avoided in new code. NetLegacyOptions isn't new, but it's only used internally, not in QMP. Convert it to a flat union. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487709988-14322-3-git-send-email-armbru@redhat.com>
2017-02-15net: Mark 'vlan' parameter as deprecatedThomas Huth1-0/+6
The 'vlan' parameter is a continuous source of confusion for the users, many people mix it up with the more common term VLAN (the link layer packet encapsulation), and even if they realize that the QEMU 'vlan' is rather some kind of network hub emulation, there is still a high risk that they configure their QEMU networking in a wrong way with this parameter (e.g. by hooking NICs together, so they get a 'loopback' between one and the other NIC). Thus at one point in time, we should finally get rid of the 'vlan' feature in QEMU. Let's do a first step in this direction by declaring the 'vlan' parameter as deprecated and informing the users to use the 'netdev' parameter instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-11-15net: fix sending of data with -net socket, listen backendDaniel P. Berrange1-3/+2
The use of -net socket,listen was broken in the following commit commit 16a3df403b10c4ac347159e39005fd520b2648bb Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Date: Fri May 13 15:35:19 2016 +0800 net/net: Add SocketReadState for reuse codes This function is from net/socket.c, move it to net.c and net.h. Add SocketReadState to make others reuse net_fill_rstate(). suggestion from jason. This refactored the state out of NetSocketState into a separate SocketReadState. This refactoring requires that a callback is provided to be triggered upon completion of a packet receive from the guest. The patch only registered this callback in the codepaths hit by -net socket,connect, not -net socket,listen. So as a result packets sent by the guest in the latter case get dropped on the floor. This bug is hidden because net_fill_rstate() silently does nothing if the callback is not set. This patch adds in the middle callback registration and also adds an assert so that QEMU aborts if there are any other codepaths hit which are missing the callback. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27net: limit allocation in nc_sendv_compatPeter Lieven1-2/+6
we only need to allocate enough memory to hold the packet. This might be less than NET_BUFSIZE. Additionally fail early if the packet is larger than NET_BUFSIZE. Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27net: hmp_host_net_remove: Del the -net option of the removed host_netShmulik Ladkani1-0/+1
Upon hmp_host_net_remove(), the appropriate -net client is deleted (according to the given vlan_id and device id), as well as the corresponsing hub port. However, the relevant '-net' option that was added by former hmp_host_net_add() call is still present in "net" options group. This makes the following legit HMP sequence erroneous: (qemu) host_net_add tap id=n1,ifname=tap1,script=no,downscript=no,vlan=1 (qemu) host_net_remove 1 n1 (qemu) host_net_add tap id=n1,ifname=tap1,script=no,downscript=no,vlan=1 Duplicate ID 'n1' for net Fix, by deleting the stored '-net' option associated with the given device id. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-08-18net/net: properly handle multiple packets in net_fill_rstate()Zhang Chen1-4/+4
When network is busy, we will receive multiple packets at one time. In that situation, we should keep trying to do the receiving instead of finalizing only the first packet. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-19net: Use correct type for bool flagEric Blake1-6/+6
is_netdev is only used as a bool, so make it one. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19qapi: Change Netdev into a flat unionEric Blake1-48/+85
This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19net: use Netdev instead of NetClientOptions in client initKővágó, Zoltán1-7/+11
This way we no longer need NetClientOptions and can convert Netdev into a flat union. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <93ffdfed7054529635e6acb935150d95dc173a12.1441627176.git.DirtY.iCE.hu@gmail.com> [rework net_client_init1() to pass Netdev by copying from NetdevLegacy, rather than merging the two types - which means that we still need NetClientOptions after all. Rebase to qapi changes. The bulk of the patch is mechanical, replacing 'opts' by 'netdev->opts', while net_client_init1() takes care of converting between legacy and modern types.] Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-2-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06qapi: Add new visit_complete() functionEric Blake1-6/+5
Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06string-output-visitor: Favor new visit_free() functionEric Blake1-1/+1
Now that we have a polymorphic visit_free(), we no longer need string_output_visitor_cleanup(); however, we still need to expose the subtype for string_output_get_string(). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-9-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06opts-visitor: Favor new visit_free() functionEric Blake1-3/+2
Now that we have a polymorphic visit_free(), we no longer need opts_visitor_cleanup(); which in turn means we no longer need to return a subtype from opts_visitor_new() nor a public upcast function. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-6-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-28net: fix qemu_announce_self not emitting packetsPeter Lieven1-1/+1
commit fefe2a78 accidently dropped the code path for injecting raw packets. This feature is needed for sending gratuitous ARPs after an incoming migration has completed. The result is increased network downtime for vservers where the network card is not virtio-net with the VIRTIO_NET_F_GUEST_ANNOUNCE feature. Fixes: fefe2a78abde932e0f340b21bded2c86def1d242 Cc: qemu-stable@nongnu.org Cc: hongyang.yang@easystack.cn Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-01net/net: Add SocketReadState for reuse codesZhang Chen1-0/+70
This function is from net/socket.c, move it to net.c and net.h. Add SocketReadState to make others reuse net_fill_rstate(). suggestion from jason. v4: - move 'rs->finalize = finalize' to rs_init() v3: - remove SocketReadState init callback - put finalize callback to net_fill_rstate() v2: - rename ReadState to SocketReadState - add SocketReadState init and finalize callback v1: - init patch Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-01net: vl: Move default_net to vl.cEduardo Habkost1-23/+0
All handling of defaults (default_* variables) is inside vl.c, move default_net there too, so we can more easily refactor that code later. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-04-06net: fix OptsVisitor memory leakPaolo Bonzini1-0/+1
Fixes 96a1616("qapi-dealloc: Reduce use outside of generated code") Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-04-06net: Allocating Large sized arrays to heapPooja Dhannawat1-4/+9
nc_sendv_compat has a huge stack usage of 69680 bytes approx. Moving large arrays to heap to reduce stack usage. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Pooja Dhannawat <dhannawatpooja1@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-04-06util: Improved qemu_hexmap() to include an ascii dump of the bufferIsaac Lozano1-29/+1
qemu_hexdump() in util/hexdump.c has been changed to give also include a ascii dump of the buffer. Also, calls to hex_dump() in net/net.c have been replaced with calls to qemu_hexdump(). This takes care of two misc BiteSized Tasks. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Isaac Lozano <109lozanoi@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-31Fix ipv6 options according to documentationSamuel Thibault1-7/+7
The options names were fixed in the qapi layer, but not in the command-line options. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Eric Blake <eblake@redhat.com>
generated by cgit v1.1 at 2024-12-27 06:39:05 +0000