aboutsummaryrefslogtreecommitdiff
path: root/net/hub.c
AgeCommit message (Collapse)AuthorFilesLines
2018-12-04net: hub: suppress warnings of no host network for qtestJason Wang1-1/+2
If we want to qtest through hub, it would be much more simpler and safer to configure the hub without host network. So silent this warnings for qtest. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20181204035347.6148-3-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-14net: Get rid of 'vlan' terminology and use 'hub' instead in the source filesThomas Huth1-4/+3
'vlan' is very confusing since it does not mean something like IEEE 802.1Q, but rather emulated hubs, so let's switch to that terminology instead. Buglink: https://bugs.launchpad.net/qemu/+bug/658904 Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-29net: Allow hubports to connect to other netdevsThomas Huth1-6/+21
QEMU can emulate hubs to connect NICs and netdevs. This is currently primarily used for the mis-named 'vlan' feature of the networking subsystem. Now the 'vlan' feature has been marked as deprecated, since its name is rather confusing and the users often rather mis-configure their network when trying to use it. But while the 'vlan' parameter should be removed at one point in time, the basic idea of emulating a hub in QEMU is still good: It's useful for bundling up the output of multiple NICs into one single l2tp netdev for example. Now to be able to use the hubport feature without 'vlan's, there is one missing piece: The possibility to connect a hubport to a netdev, too. This patch adds this possibility by introducing a new "netdev=..." parameter to the hubports. To bundle up the output of multiple NICs into one socket netdev, you can now run QEMU with these parameters for example: qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \ -netdev hubport,hubid=1,id=h1,netdev=s1 \ -netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \ -netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3 For using the socket netdev, you have got to start another QEMU as the receiving side first, for example with network dumping enabled: qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \ -device ne2k_isa,netdev=s0 \ -object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat After the ppc64 guest tried to boot from both NICs, you can see in the dump file (using Wireshark, for example), that the output of both NICs (the e1000 and the virtio-net-pci) has been successfully transfered via the socket netdev in this case. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-19General warn report fixupsAlistair Francis1-4/+2
Tidy up some of the warn_report() messages after having converted them to use warn_report(). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <9cb1d23551898c9c9a5f84da6773e99871285120.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19Convert multi-line fprintf() to warn_report()Alistair Francis1-5/+4
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these commands: find ./* -type f -exec sed -i \ 'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + Indentation fixed up manually afterwards. Some of the lines were manually edited to reduce the line length to below 80 charecters. Some of the lines with newlines in the middle of the string were also manually edit to avoid checkpatch errrors. The #include lines were manually updated to allow the code to compile. Several of the warning messages can be improved after this patch, to keep this patch mechanical this has been moved into a later patch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Alexander Graf <agraf@suse.de> Cc: Jason Wang <jasowang@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19Convert single line fprintf(.../n) to warn_report()Alistair Francis1-1/+2
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using this command: find ./* -type f -exec sed -i \ 's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \ {} + Some of the lines were manually edited to reduce the line length to below 80 charecters. The #include lines were manually updated to allow the code to compile. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips] Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-19qapi: Change Netdev into a flat unionEric Blake1-11/+11
This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19net: use Netdev instead of NetClientOptions in client initKővágó, Zoltán1-3/+3
This way we no longer need NetClientOptions and can convert Netdev into a flat union. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <93ffdfed7054529635e6acb935150d95dc173a12.1441627176.git.DirtY.iCE.hu@gmail.com> [rework net_client_init1() to pass Netdev by copying from NetdevLegacy, rather than merging the two types - which means that we still need NetClientOptions after all. Rebase to qapi changes. The bulk of the patch is mechanical, replacing 'opts' by 'netdev->opts', while net_client_init1() takes care of converting between legacy and modern types.] Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-2-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-18qapi: Don't special-case simple union wrappersEric Blake1-1/+1
Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-04net: Clean up includesPeter Maydell1-0/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-11-git-send-email-peter.maydell@linaro.org
2015-11-02net: Convert to new qapi union layoutEric Blake1-2/+2
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for net-related code. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-18-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-05-27net: Permit incremental conversion of init functions to ErrorMarkus Armbruster1-1/+1
Error reporting for netdev_add is broken: the net_client_init_fun[] report the actual errors with (at best) error_report(), and their caller net_client_init1() makes up a generic error on top. For command line and HMP, this produces an mildly ugly error cascade. In QMP, the actual errors go to stderr, and the generic error becomes the command's error reply. To fix this, we need to convert the net_client_init_fun[] to Error. To permit fixing them one by one, add an Error ** parameter to the net_client_init_fun[]. If the call fails without returning an Error, make up the same generic Error as before. But if it returns one, use that instead. Since none of them does so far, no functional change. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-3-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27net: Improve error message for -net hubport a bitMarkus Armbruster1-4/+1
Type "hubport" is valid only with -netdev. Unfortunately, that's detected late and the error message doesn't explain why: $ qemu-system-i386 -net hubport,id=foo,hubid=0 qemu-system-i386: -net hubport,id=foo,hubid=0: Device 'hubport' could not be initialized Improve the error message to "Parameter 'type' expects a net type". Not fixed: -net hubport without the parameters required by -netdev hubport still asks for those parameters: $ qemu-system-i386 -net hubport qemu-system-i386: -net hubport: Parameter 'hubid' is missing Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-2-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-06net: remove the wrong comment in net_init_hubport()Jason Wang1-1/+0
Not only nic could be the one to peer. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-id: 1422860798-17495-2-git-send-email-jasowang@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-06monitor: print hub port name during info networkJason Wang1-1/+4
Signed-off-by: Jason Wang <jasowang@redhat.com> Message-id: 1422860798-17495-1-git-send-email-jasowang@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-19Add the vhost-user netdev backend to the command lineNikolay Nikolaev1-0/+1
The supplied chardev id will be inspected for supported options. Only a socket backend, with a set path (i.e. a Unix socket) and optionally the server parameter set, will be allowed. Other options (nowait, telnet) will make the chardev unusable and the netdev will not be initialised. Additional checks for validity: - requires `-numa node,memdev=..` - requires `-device virtio-net-*` The `vhostforce` option is used to force vhost-net when we deal with non-MSIX guests. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-09-06net: Rename send_queue to incoming_queueJan Kiszka1-1/+1
Each networking client has a queue for packets that could not yet be delivered to that client. Calling this queue "send_queue" is highly confusing as it has nothing to to with packets send from this client but to it. Avoid this confusing by renaming it to "incoming_queue". Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27net: fix qemu_flush_queued_packets() in presence of a hubLuigi Rizzo1-0/+14
When frontend and backend are connected through a hub as below (showing only one direction), and the frontend (or in general, all output ports of the hub) cannot accept more traffic, the backend queues packets in queue-A. When the frontend (or in general, one output port) becomes ready again, quemu tries to flush packets from queue-B, which is unfortunately empty. e1000.0 <--[queue B]-- hub0port0(hub)hub0port1 <--[queue A]-- tap.0 To fix this i propose to introduce a new function net_hub_flush() which is called when trying to flush a queue connected to a hub. Signed-off-by: Luigi Rizzo <rizzo@iet.unipi.it> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-19Merge remote-tracking branch 'bonzini/header-dirs' into stagingAnthony Liguori1-3/+3
* bonzini/header-dirs: (45 commits) janitor: move remaining public headers to include/ hw: move executable format header files to hw/ fpu: move public header file to include/fpu softmmu: move remaining include files to include/ subdirectories softmmu: move include files to include/sysemu/ misc: move include files to include/qemu/ qom: move include files to include/qom/ migration: move include files to include/migration/ monitor: move include files to include/monitor/ exec: move include files to include/exec/ block: move include files to include/block/ qapi: move include files to include/qobject/ janitor: add guards to headers qapi: make struct Visitor opaque qapi: remove qapi/qapi-types-core.h qapi: move inclusions of qemu-common.h from headers to .c files ui: move files to ui/ and include/ui/ qemu-ga: move qemu-ga files to qga/ net: reorganize headers net: move net.c to net/ ... Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19monitor: move include files to include/monitor/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19net: reorganize headersPaolo Bonzini1-1/+1
Move public headers to include/net, and leave private headers in net/. Put the virtio headers in include/net/tap.h, removing the multiple copies that existed. Leave include/net/tap.h as the interface for NICs, and net/tap_int.h as the interface for OS-specific parts of the tap backend. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-18net, hub: fix the indent in the commentsZhi Yong Wu1-1/+1
Remove some redundant blanks in the comments of net_hub_id_for_client(). Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-10-08net: consolidate NetClientState header files into onePaolo Bonzini1-0/+1
This patch doesn't seem much useful alone, I must admit. However, it makes sense as part of the upcoming directory reorganization, where I want to have include/net/tap.h as the net<->hw interface for tap. Then having both net/tap.h and include/net/tap.h does not work. "Fixed" by moving all the init functions to a single header file net/clients.h. The patch also adopts a uniform style for including net/*.h files from net/*.c, without the net/ path. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-09-14net: broadcast hub packets if at least one port can receiveStefan Hajnoczi1-3/+3
In commit 60c07d933c66c4b30a83b7ccbc8a0cb3df1b2d0e ("net: fix qemu_can_send_packet logic") the "VLAN" broadcast behavior was changed to queue packets if any net client cannot receive. It turns out that this was not actually the right fix and just hides the real bug that hw/usb/dev-network.c:usbnet_receive() clobbers its receive buffer when called multiple times in a row. The commit also introduced a new bug that "VLAN" packets would not be sent if one of multiple net clients was down. The hw/usb/dev-network.c bug has since been fixed, so this patch reverts broadcast behavior to send packets as long as one net client can receive. Packets simply get queued for the net clients that are temporarily unable to receive. Reported-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-08-01hub: add the support for hub own flow controlZhi Yong Wu1-3/+24
Only when all other hub port's *peer* .can_receive() all return 1, the source hub port .can_receive() return 1. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01net: Make "info network" output more readable infoZhi Yong Wu1-2/+4
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01net: Rename VLANClientState to NetClientStateStefan Hajnoczi1-13/+13
The vlan feature is no longer part of net core. Rename VLANClientState to NetClientState because net clients are not explicitly associated with a vlan at all, instead they have a peer net client to which they are connected. This patch is a mechanical search-and-replace except for a few whitespace fixups where changing VLANClientState to NetClientState misaligned whitespace. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01net: Convert qdev_prop_vlan to peer with hubZhi Yong Wu1-0/+25
Instead of using VLANState use net/hub.h to support the vlan qdev property. The vlan qdev property becomes an alias for the peer qdev property but is represented as a VLAN ID number. When a VLAN ID is selected the device will really peer with a hub port. Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01net: Drop vlan argument to qemu_new_net_client()Stefan Hajnoczi1-1/+1
Since hubs are now used to implement the 'vlan' feature and the vlan argument is always NULL, remove the argument entirely and update all net clients that use qemu_new_net_client(). Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01hub: Check that hubs are configured correctlyStefan Hajnoczi1-0/+45
Checks can be performed to make sure that hubs have at least one NIC and one host device, warning the user if this is not the case. Configurations which do not meet this rule tend to be broken but just emit a warning. This patch preserves compatibility with the checks performed by net core on vlans. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01net: Look up 'vlan' net clients using hubsStefan Hajnoczi1-0/+23
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01net: Use hubs for the vlan featureStefan Hajnoczi1-3/+3
Stop using the special-case vlan code in net.c. Instead use the hub net client to implement the vlan feature. The next patch will remove vlan code from net.c completely. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01net: Add a hub net clientStefan Hajnoczi1-0/+223
The vlan feature can be implemented in terms of hubs. By introducing a hub net client it becomes possible to remove the special case vlan code from net.c and push the vlan feature out of generic networking code. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
generated by cgit v1.1 at 2024-11-02 22:28:24 +0000