aboutsummaryrefslogtreecommitdiff
path: root/net.c
AgeCommit message (Collapse)AuthorFilesLines
2010-12-09net/sock: option to specify local addressMike Ryan1-0/+4
Add an option to specify the host IP to send multicast packets from, when using a multicast socket for networking. The option takes an IP address and sets the IP_MULTICAST_IF socket option, which causes the packets to use that IP's interface as an egress. This is useful if the host machine has several interfaces with several virtual networks across disparate interfaces. Signed-off-by: Mike Ryan <mikeryan@ISI.EDU> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-27net: properly handle illegal fd/vhostfd from command lineJason Wang1-5/+11
When hanlding fd/vhostfd form command line through net_handle_fd_param(), we need to check mon and return value of strtol() otherwise we could get segmentation fault or invalid fd when user type an illegal fd/vhostfd. This patch is based on the suggestions from Luiz Capitulino <lcapitulino@redhat.com>. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-06net: delay freeing peer host deviceMichael S. Tsirkin1-7/+42
With -netdev, virtio devices present offload features to guest, depending on the backend used. Thus, removing host netdev peer while guest is active leads to guest-visible inconsistency and/or crashes. As a solution, while guest (NIC) peer device exists, we prevent the host peer from being deleted. This patch does this by adding peer_deleted flag in nic state: if host device is going away while guest device is around, set this flag and keep a shell of the host device around for as long as guest device exists. The link is put down so all packets will get discarded. At the moment, management can detect that device deletion is delayed by doing info net. As a next step, we shall add commands that control hotplug/unplug without removing the device, and an event to report that guest has responded to the hotplug event. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com>
2010-08-22QemuOpts: make most qemu_*_opts staticGerd Hoffmann1-7/+9
Switch tree to lookup-by-name using qemu_find_opts(). Also hook up virtfs options so qemu_find_opts works for them too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-01net: delete QemuOpts when net_client_init() fails.Yoshiaki Tamura1-0/+4
This fixes the following scenario using QMP. First, put a bogus argument "foo" to "type", which results in an error. {"execute": "netdev_add", "arguments": { "type": "foo", "id": "netdev1" } } Then, call it again with correct argument "user". {"execute": "netdev_add", "arguments": { "type": "user", "id": "netdev1" } } This results in "DuplicatedId" error. Because the first command was invalid, it should be able to reuse the same "id", and the second command should work. Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-06-30net: Fix VM start with '-net none'Amit Shah1-1/+1
Commit 50e32ea8f31035877decc10f1075aa0e619e09cb changed the behaviour for the return type of net_client_init() when a nic type with no init method was specified. 'none' is one such nic type. Instead of returning 0, which gets interpreted as an index into the nd_table[] array, we switched to returning -1, which signifies an error as well. That broke VM start with '-net none'. Testing was only done with the monitor command 'pci_add', which doesn't fail. The correct fix would still be to return 0+ values from net_client_init() only when the return value can be used as an index to refer to an entry in nd_table[]. With the current code, callers can erroneously poke into nd_table[0] when -net nic is used, which can lead to badness. However, this commit just returns to the previous behaviour before the offending commit. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-14Make netdev_del delete the netdev even when it's in useMarkus Armbruster1-4/+0
To hot-unplug guest and host part of a network device, you do: device_del NIC-ID netdev_del NETDEV-ID For PCI devices, device_del merely tells ACPI to unplug the device. The device goes away for real only after the guest processed the ACPI unplug event. You have to wait until then (e.g. by polling info pci) before you can unplug the netdev. Not good. Fix by removing the "in use" check from do_netdev_del(). Deleting a netdev while it's in use is safe; packets simply get routed to the bit bucket. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-10Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori1-2/+5
2010-06-09net: Fix hotplug with pci_addAmit Shah1-2/+5
The correct model type wasn't getting added when hotplugging nics with pci_add. Testcase: start VM with default nic type. In the qemu_monitor: (qemu) pci_add auto nic model=virtio This results in a nic hot-plug of the same nic type as the default. This was broken in 5294e2c774f120e10b44652ac143abda356f44eb Also changes the behaviour where no .init is defined for a net_client_type. Previously, 0 was returned, which indicated the init was successful and that 0 was the index into the nd_tables[] array. Return -1, indicating unsuccessful init, in such a case. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-06-01Monitor: Drop QMP documentation from codeLuiz Capitulino1-22/+0
Previous commit added QMP documentation to the qemu-monitor.hx file, it's is a copy of this information. While it's good to keep it near code, maintaining two copies of the same information is too hard and has little benefit as we don't expect client writers to consult the code to find how to use a QMP command. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-18monitor: Convert do_set_link() to QObject, QErrorMarkus Armbruster1-3/+4
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-18monitor: Use argument type 'b' for set_linkMarkus Armbruster1-8/+2
Second argument is now "on" or "off" instead of "up" or "down". Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-18monitor: New commands netdev_add, netdev_delMarkus Armbruster1-0/+55
Monitor commands to go with -netdev. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-18error: Convert net_client_init() to QErrorMarkus Armbruster1-20/+18
The conversion is shallow: client type init() methods aren't converted. Converting them is a big job for relatively little practical benefit, so leave it for later. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-18error: Drop extra messages after qemu_opts_set() and qemu_opts_parse()Markus Armbruster1-2/+0
Both functions report errors nicely enough now, no need for additional messages. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-10net: remove broken net_set_boot_mask() boot device validationEduardo Habkost1-19/+0
There are many problems with net_set_boot_mask(): 1) It is broken when using the device model instead of "-net nic". Example: $ qemu-system-x86_64 -device rtl8139,vlan=0,id=net0,mac=52:54:00:82:41:fd,bus=pci.0,addr=0x4 -net user,vlan=0,name=hostnet0 -vnc 0.0.0.0:0 -boot n Cannot boot from non-existent NIC $ 2) The mask was previously used to set which boot ROMs were supposed to be loaded, but this was changed long time ago. Now all ROM images are loaded, and SeaBIOS takes care of jumping to the right boot entry point depending on the boot settings. 3) Interpretation and validation of the boot parameter letters is done on the machine type code. Examples: PC accepts only a,b,c,d,n as valid boot device letters. mac99 accepts only a,b,c,d,e,f. As a side-effect of this change, qemu-kvm won't abort anymore if using "-boot n" on a machine with no network devices. Checking if the requested boot device is valid is now a task for the BIOS or the machine-type code. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-10net: remove NICInfo.bootable fieldEduardo Habkost1-1/+0
It is just set by net_set_boot_mask() and never used. The logic for rom loading changed a lot since this field was introduced. It is not needed anymore. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01tap: add vhost/vhostfd optionsMichael S. Tsirkin1-0/+8
This adds vhost binary option to tap, to enable vhost net accelerator. Default is off for now, we'll be able to make default on long term when we know it's stable. vhostfd option can be used by management, to pass in the fd. Assigning vhostfd implies vhost=on. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-16qemu-option: Move the implied first name into QemuOptsListMarkus Armbruster1-2/+2
We sometimes permit omitting the first option name, for example -device foo is short for -device driver=foo. The name to use ("driver" in the example) is passed as argument to qemu_opts_parse(). For each QemuOptsList, we use at most one such name. Move the name into QemuOptsList, and pass whether to permit the abbreviation. This ensures continued consistency, and simplifies the commit after next in this series.
2010-03-16error: Replace qemu_error() by error_report()Markus Armbruster1-14/+14
error_report() terminates the message with a newline. Strip it it from its arguments. This fixes a few error messages lacking a newline: net_handle_fd_param()'s "No file descriptor named %s found", and tap_open()'s "vnet_hdr=1 requested, but no kernel support for IFF_VNET_HDR available" (all three versions). There's one place that passes arguments without newlines intentionally: load_vmstate(). Fix it up.
2010-03-09qdev: Catch attempt to attach more than one device to a netdevMarkus Armbruster1-0/+1
Guest device and host netdev are peers, i.e. it's a 1:1 relation. However, we fail to enforce that: $ qemu -nodefaults --nographic -netdev user,id=net0 -device e1000,netdev=net0 -device virtio-net-pci,netdev=net0 -monitor stdio QEMU 0.12.50 monitor - type 'help' for more information (qemu) info network Devices not on any VLAN: net0: net=10.0.2.0, restricted=n peer=virtio-net-pci.0 e1000.0: model=e1000,macaddr=52:54:00:12:34:56 peer=net0 virtio-net-pci.0: model=virtio-net-pci,macaddr=52:54:00:12:34:57 peer=net0 It's all downhill from there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08qdev: Add a DEV_NVECTORS_UNSPECIFIED enum for unspecified nr of MSI vectorsAmit Shah1-2/+4
net.c used a constant to signify no MSI vectors were specified. Extend that to all qdev devices. Signed-off-by: Amit Shah <amit.shah@redhat.com> Reported-by: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-21Allow const QemuOptDescBlue Swirl1-1/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-20Fix warning on OpenBSDBlue Swirl1-1/+1
/src/qemu/net.c: In function `net_check_clients': /src/qemu/net.c:1287: warning: `has_nic' might be used uninitialized in this function /src/qemu/net.c:1287: warning: `has_host_dev' might be used uninitialized in this function Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-19net: Monitor command set_link finds only VLAN clients, fixMarkus Armbruster1-0/+1
Clients not associated with a VLAN exist since commit d80b9fc6. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19net: info network shows only VLAN clients, fixMarkus Armbruster1-2/+9
Clients not associated with a VLAN exist since commit d80b9fc6. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19net: net_check_clients() checks only VLAN clients, fixMarkus Armbruster1-0/+7
Clients not associated with a VLAN exist since commit d80b9fc6. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19net: Fix bogus "Warning: vlan 0 with no nics" with -deviceMarkus Armbruster1-7/+18
net_check_clients() prints this when an VLAN has host devices, but no guest devices. It uses VLANState members nb_guest_devs and nb_host_devs to keep track of these devices. However, -device does not update nb_guest_devs, only net_init_nic() does that, for -net nic. Check the VLAN clients directly, and remove the counters. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19net: net_check_clients() runs too early to see -device, fixMarkus Armbruster1-3/+1
Call it right after -device devices get created. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19net: Remove unused net_client_uninit()Markus Armbruster1-14/+0
Unused since commit 9ad4531e. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10don't dereference NULL after failed strdupJim Meyering1-1/+1
Most of these are obvious NULL-deref bug fixes, for example, the ones in these files: block/curl.c net.c slirp/misc.c and the first one in block/vvfat.c. The others in block/vvfat.c may not lead to an immediate segfault, but I traced the two schedule_rename(..., strdup(path)) uses, and a failed strdup would appear to trigger this assertion in handle_renames_and_mkdirs: assert(commit->path); The conversion to use qemu_strdup in envlist_to_environ is not technically needed, but does avoid a theoretical leak in the caller when strdup fails for one value, but later succeeds in allocating another buffer(plausible, if one string length is much larger than the others). The caller does not know the length of the returned list, and as such can only free pointers until it hits the first NULL. If there are non-NULL pointers beyond the first, their buffers would be leaked. This one is admittedly far-fetched. The two in linux-user/main.c are worth fixing to ensure that an OOM error is diagnosed up front, rather than letting it provoke some harder-to-diagnose secondary error, in case of exec failure, or worse, in case the exec succeeds but with an invalid list of command line options. However, considering how unlikely it is to encounter a failed strdup early in main, this isn't a big deal. Note that adding the required uses of qemu_strdup here and in envlist.c induce link failures because qemu_strdup is not currently in any library they're linked with. So for now, I've omitted those changes, as well as the fixes in target-i386/helper.c and target-sparc/helper.c. If you'd like to see the above discussion (or anything else) in the commit log, just let me know and I'll be happy to adjust. >From 9af42864fd1ea666bd25e2cecfdfae74c20aa8c7 Mon Sep 17 00:00:00 2001 From: Jim Meyering <meyering@redhat.com> Date: Mon, 8 Feb 2010 18:29:29 +0100 Subject: [PATCH] don't dereference NULL after failed strdup Handle failing strdup by replacing each use with qemu_strdup, so as not to dereference NULL or trigger a failing assertion. * block/curl.c (curl_open): s/\bstrdup\b/qemu_strdup/ * block/vvfat.c (init_directories): Likewise. (get_cluster_count_for_direntry, check_directory_consistency): Likewise. * net.c (parse_host_src_port): Likewise. * slirp/misc.c (fork_exec): Likewise. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12default devices: networkGerd Hoffmann1-1/+4
Add a default_net variable which specified whenever a default network should be created. It is cleared in case any -net option is specified and it is also added to the new -nodefaults switch. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: print correct error for '-netdev ""'Mark McLoughlin1-5/+11
Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: add qemu_foreach_nic()Mark McLoughlin1-0/+20
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: remove VLANClientState members now in NetClientInfoMark McLoughlin1-25/+20
Add a NetClientInfo pointer to VLANClientState and use that for the typecode and function pointers. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: remove qemu_new_vlan_client()Mark McLoughlin1-44/+0
... and VLANClientState::opaque and qemu_find_vlan_client(). All of these are now unused Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: move parse_macaddr() to net/util.[ch]Mark McLoughlin1-33/+2
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: introduce NICState and qemu_new_nic()Mark McLoughlin1-0/+21
Common state for all NICs. The opaque member will replace the opaque member in VLANClientState since only NICs need it. The conf member will allow us to iterate over NICs, access the MAC addr for the NIC and send a packet from each NIC in qemu_announce_self(). Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: introduce qemu_new_net_client()Mark McLoughlin1-21/+49
A replacement for qemu_new_vlan_client(), using NetClientInfo to replace most arguments. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: clean up includes in net.cMark McLoughlin1-70/+3
This is probably a little drastic, but the includes in this file are now totally out of control when compared with what includes are actually needed. This may break the build on e.g. *BSD, but it will be easily fixed by re-instating an include. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: move dump backend code from net.c to net/dump.cMark McLoughlin1-126/+1
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: move socket backend code from net.c to net/socket.cMark McLoughlin1-529/+1
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: move vde code from net.c to net/vde.cMark McLoughlin1-101/+1
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: move slirp code from net.c to net/slirp.cMark McLoughlin1-712/+6
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-29Add support for GNU/kFreeBSDAurelien Jarno1-4/+1
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-09net: disable receiving if client returns zeroMark McLoughlin1-11/+38
If a receiver returns zero, that means its queue is full and it will notify us when room is available using qemu_flush_queued_packets(). Take note of that and disable that receiver until it flushes its queue. This is a first step towards allowing can_receive() handlers to return true even if no buffer space is available. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30net: move AIX code into net/tap-aix.cMark McLoughlin1-2/+0
Okay, this makes the tap options available on AIX even though there's no support, but if we want to do it right we should have not compile the tap code at all on AIX using e.g. CONFIG_TAP. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30net: split all the tap code out into net/tap.cMark McLoughlin1-691/+1
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30net: move tap-linux.h under net/Mark McLoughlin1-1/+1
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30net: move more stuff into net/tap-win32.c, add net/tap.hMark McLoughlin1-64/+11
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2024-12-28 02:59:25 +0000