aboutsummaryrefslogtreecommitdiff
path: root/net.c
AgeCommit message (Collapse)AuthorFilesLines
2011-08-20Use glib memory allocation and free functionsAnthony Liguori1-12/+12
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-04Merge remote-tracking branch 'mst/for_anthony' into stagingAnthony Liguori1-4/+15
2011-07-23net: Consistently use qemu_macaddr_default_if_unsetJan Kiszka1-8/+2
Drop the open-coded MAC assignment from net_init_nic and replace it with standard qemu_macaddr_default_if_unset which is also used by qdev. That avoid creating colliding MACs when instantiating NICs via different mechanisms. This change requires to store the MAC as MACAddr in NICInfo, and the remaining nd_table users need to be updated. Based on suggestion by Peter Maydell. CC: Markus Armbruster <armbru@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23net: Dump client type 'info network'Jan Kiszka1-3/+12
Include the client type name into the output of 'info network'. The result looks like this: (qemu) info network VLAN 0 devices: rtl8139.0: type=nic,model=rtl8139,macaddr=52:54:00:12:34:57 Devices not on any VLAN: virtio-net-pci.0: type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:56 \ network1: type=tap,fd=5 CC: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23net: Refactor net_client_typesJan Kiszka1-12/+18
Position entries of net_client_types according to the corresponding values of NET_CLIENT_TYPE_*. The array size is now defined by NET_CLIENT_TYPE_MAX. This will allow to obtain entries based on type value in later patches. At this chance rename NET_CLIENT_TYPE_SLIRP to NET_CLIENT_TYPE_USER for the sake of consistency. CC: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23net: Improve layout of 'info network'Jan Kiszka1-5/+9
Improve the layout when listing non-vlan clients via 'info network'. The result looks like this: (qemu) info network Devices not on any VLAN: orphan: net=10.0.2.0, restricted=n virtio-net-pci.0: model=virtio-net-pci,macaddr=52:54:00:12:34:56 \ network2: fd=5 e1000.0: model=e1000,macaddr=52:54:00:12:34:57 \ network1: net=10.0.2.0, restricted=n rtl8139.0: model=rtl8139,macaddr=52:54:00:12:34:58 ie. peers are grouped, orphans are listed as before. CC: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-19Fix netdev name lookup in -device, device_add, netdev_delMarkus Armbruster1-2/+8
qemu_find_netdev() looks up members of non_vlan_clients by name. It happily returns the first match. Trouble is the names need not be unique. non_vlan_clients contains host parts (netdevs) and guest parts (NICs). Netdevs have unique names: a netdev's name is a (mandatory) qemu_netdev_opts ID, and these are unique. NIC names are not unique. If a NIC has a qdev ID (which is unique), that's its name. Else, we make up a name. The made-up names are unique, but they can clash with qdev IDs. Even if NICs had unique names, they could still clash with netdev names. Callers of qemu_find_netdev(): * net_init_nic() wants a netdev. It happens to work because it runs before NICs get added to non_vlan_clients. * do_netdev_del() wants a netdev. If it gets a NIC, it complains and fails. Bug: a netdev with the same name that comes later in non_vlan_clients can't be deleted: $ qemu-system-x86_64 -nodefaults -vnc :0 -S -monitor stdio -netdev user,id=hostnet0 -device virtio-net-pci,netdev=hostnet0,id=virtio1 [...] (qemu) netdev_add user,id=virtio1 (qemu) info network Devices not on any VLAN: hostnet0: net=10.0.2.0, restricted=n peer=virtio1 virtio1: model=virtio-net-pci,macaddr=52:54:00:12:34:56 peer=hostnet0 virtio1: net=10.0.2.0, restricted=n (qemu) netdev_del virtio1 Device 'virtio1' not found * parse_netdev() wants a netdev. If it gets a NIC, it gets confused. With the test setup above: (qemu) device_add virtio-net-pci,netdev=virtio1 Property 'virtio-net-pci.netdev' can't take value 'virtio1', it's in use You can even connect two NICs to each other: $ qemu-system-x86_64 -nodefaults -vnc :0 -S -monitor stdio -device virtio-net-pci,id=virtio1 -device e1000,netdev=virtio1 [...] Devices not on any VLAN: virtio1: model=virtio-net-pci,macaddr=52:54:00:12:34:56 peer=e1000.0 e1000.0: model=e1000,macaddr=52:54:00:12:34:57 peer=virtio1 (qemu) q Segmentation fault (core dumped) * do_set_link() works fine for both netdevs and NICs. Whether it really makes sense for netdevs is debatable, but that's outside this patch's scope. Change qemu_find_netdev() to return only netdevs. This fixes the netdev_del and device_add/-device bugs demonstrated above. To avoid changing set_link, make do_set_link() search non_vlan_clients by hand instead of calling qemu_find_netdev(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19Fix automatically assigned network names for netdevMarkus Armbruster1-2/+7
If a network client doesn't have a name, we make one up, with assign_name(). assign_name() creates a name MODEL.NUM, where MODEL is the client's model, and NUM is the number of MODELs that already exist. Bug: it misses clients that are not on a VLAN, i.e. netdevs and the NICs using them: $ qemu-system-x86_64 -nodefaults -vnc :0 -S -monitor stdio -netdev user,id=hostnet0 -net nic,netdev=hostnet0 -netdev user,id=hostnet1 -net nic,netdev=hostnet1 QEMU 0.14.50 monitor - type 'help' for more information (qemu) info network Devices not on any VLAN: hostnet0: net=10.0.2.0, restricted=n peer=e1000.0 hostnet1: net=10.0.2.0, restricted=n peer=e1000.0 e1000.0: model=e1000,macaddr=52:54:00:12:34:56 peer=hostnet0 e1000.0: model=e1000,macaddr=52:54:00:12:34:57 peer=hostnet1 Fix that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-24Strip trailing '\n' from error_report()'s first argumentMarkus Armbruster1-1/+1
error_report() prepends location, and appends a newline. The message constructed from the arguments should not contain a newline. Fix the obvious offenders. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-06-22net: Warn about "-net nic" options which were ignoredPeter Maydell1-0/+15
Diagnose the case where the user asked for a NIC via "-net nic" but the board didn't instantiate that NIC (for example where the user asked for two NICs but the board only supports one). Note that this diagnostic doesn't apply to NICs created through -device, because those are always instantiated. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-22net: Don't warn about the default network setupPeter Maydell1-0/+12
Don't warn about the default network setup that you get if no command line -net options are specified. There are two cases that we would otherwise complain about: (1) board doesn't support a NIC but the implicit "-net nic" requested one (2) CONFIG_SLIRP not set, so the implicit "-net nic" sets up a nic that isn't connected to anything Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-22Revert "net: Improve the warnings for dubious command line option combinations"Peter Maydell1-31/+0
This reverts commit f68b9d672b90dedc79aeb9b44607f484dbe46a6b. That attempt at diagnosing unused -net nic options failed to account for NICs created via -device; back it out cleanly in preparation for implementing in a different manner. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-04-15Remove unused sysemu.h include directivesBlue Swirl1-1/+0
Remove unused sysemu.h include directives to speed up build with the following patches. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-01net: Improve the warnings for dubious command line option combinationsPeter Maydell1-0/+31
Improve the warnings we give if the user specified a combination of -net options which don't make much sense: * Don't warn about anything if the config is the implicit default "-net user -net nic" rather than one specified by the user (this will only kick in for boards with no NIC or if CONFIG_SLIRP is not set) * Diagnose the case where the user asked for NICs which the board didn't instantiate (for example where the user asked for two NICs but the board only supports one) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-01Fix net_check_clients warnings: make it per vlan.Tristan Gingold1-1/+2
Signed-off-by: Tristan Gingold <gingold@adacore.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-06net: Add the missing option declaration of "vhostforce"Jason Wang1-1/+5
Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-06net: remove parse_host_src_port() functionJuan Quintela1-41/+0
It was deprecated, and it has no users. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-06net: Use iov helper functionsBenjamin Poirier1-22/+6
Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-05net: fix qemu_can_send_packet logicVincent Palatin1-3/+3
If any of the clients is not ready to receive (ie it has a can_receive callback and can_receive() returns false), we don't want to start sending, else this client may miss/discard the packet. I got this behaviour with the following setup : the emulated machine is using an USB-ethernet adapter, it is connected to the network using SLIRP and I'm dumping the traffic in a .pcap file. As per the following command line : -net nic,model=usb,vlan=1 -net user,vlan=1 -net dump,vlan=1,file=/tmp/pkt.pcap Every time that two packets are coming in a row from the host, the usb-net code will receive the first one, then returns 0 to can_receive call since it has a 1 packet long queue. But as the dump code is always ready to receive, qemu_can_send_packet will return true and the next packet will discard the previous one in the usb-net code. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-20net: notify peer about link status changeMichael S. Tsirkin1-0/+11
qemu makes it possible to disable link at tap which is not communicated to the guest but causes all packets to be dropped. This works for virtio userspace, as qemu stops giving it packets, but not for virtio-net connected to vhost-net as that does not get notified about this change. Notify peer when this happens, which will then be used by the follow-up patch to stop/start vhost-net. Note: it might be a good idea to make peer link status match tap in this case, so the guest gets an event and updates the carrier state. For now stay bug for bug compatible with what we used to have in userspace. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: pradeep <psuriset@linux.vnet.ibm.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-12-09net/sock: option to specify local addressMike Ryan1-0/+4
Add an option to specify the host IP to send multicast packets from, when using a multicast socket for networking. The option takes an IP address and sets the IP_MULTICAST_IF socket option, which causes the packets to use that IP's interface as an egress. This is useful if the host machine has several interfaces with several virtual networks across disparate interfaces. Signed-off-by: Mike Ryan <mikeryan@ISI.EDU> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-27net: properly handle illegal fd/vhostfd from command lineJason Wang1-5/+11
When hanlding fd/vhostfd form command line through net_handle_fd_param(), we need to check mon and return value of strtol() otherwise we could get segmentation fault or invalid fd when user type an illegal fd/vhostfd. This patch is based on the suggestions from Luiz Capitulino <lcapitulino@redhat.com>. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-06net: delay freeing peer host deviceMichael S. Tsirkin1-7/+42
With -netdev, virtio devices present offload features to guest, depending on the backend used. Thus, removing host netdev peer while guest is active leads to guest-visible inconsistency and/or crashes. As a solution, while guest (NIC) peer device exists, we prevent the host peer from being deleted. This patch does this by adding peer_deleted flag in nic state: if host device is going away while guest device is around, set this flag and keep a shell of the host device around for as long as guest device exists. The link is put down so all packets will get discarded. At the moment, management can detect that device deletion is delayed by doing info net. As a next step, we shall add commands that control hotplug/unplug without removing the device, and an event to report that guest has responded to the hotplug event. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com>
2010-08-22QemuOpts: make most qemu_*_opts staticGerd Hoffmann1-7/+9
Switch tree to lookup-by-name using qemu_find_opts(). Also hook up virtfs options so qemu_find_opts works for them too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-01net: delete QemuOpts when net_client_init() fails.Yoshiaki Tamura1-0/+4
This fixes the following scenario using QMP. First, put a bogus argument "foo" to "type", which results in an error. {"execute": "netdev_add", "arguments": { "type": "foo", "id": "netdev1" } } Then, call it again with correct argument "user". {"execute": "netdev_add", "arguments": { "type": "user", "id": "netdev1" } } This results in "DuplicatedId" error. Because the first command was invalid, it should be able to reuse the same "id", and the second command should work. Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-06-30net: Fix VM start with '-net none'Amit Shah1-1/+1
Commit 50e32ea8f31035877decc10f1075aa0e619e09cb changed the behaviour for the return type of net_client_init() when a nic type with no init method was specified. 'none' is one such nic type. Instead of returning 0, which gets interpreted as an index into the nd_table[] array, we switched to returning -1, which signifies an error as well. That broke VM start with '-net none'. Testing was only done with the monitor command 'pci_add', which doesn't fail. The correct fix would still be to return 0+ values from net_client_init() only when the return value can be used as an index to refer to an entry in nd_table[]. With the current code, callers can erroneously poke into nd_table[0] when -net nic is used, which can lead to badness. However, this commit just returns to the previous behaviour before the offending commit. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-14Make netdev_del delete the netdev even when it's in useMarkus Armbruster1-4/+0
To hot-unplug guest and host part of a network device, you do: device_del NIC-ID netdev_del NETDEV-ID For PCI devices, device_del merely tells ACPI to unplug the device. The device goes away for real only after the guest processed the ACPI unplug event. You have to wait until then (e.g. by polling info pci) before you can unplug the netdev. Not good. Fix by removing the "in use" check from do_netdev_del(). Deleting a netdev while it's in use is safe; packets simply get routed to the bit bucket. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-10Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori1-2/+5
2010-06-09net: Fix hotplug with pci_addAmit Shah1-2/+5
The correct model type wasn't getting added when hotplugging nics with pci_add. Testcase: start VM with default nic type. In the qemu_monitor: (qemu) pci_add auto nic model=virtio This results in a nic hot-plug of the same nic type as the default. This was broken in 5294e2c774f120e10b44652ac143abda356f44eb Also changes the behaviour where no .init is defined for a net_client_type. Previously, 0 was returned, which indicated the init was successful and that 0 was the index into the nd_tables[] array. Return -1, indicating unsuccessful init, in such a case. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-06-01Monitor: Drop QMP documentation from codeLuiz Capitulino1-22/+0
Previous commit added QMP documentation to the qemu-monitor.hx file, it's is a copy of this information. While it's good to keep it near code, maintaining two copies of the same information is too hard and has little benefit as we don't expect client writers to consult the code to find how to use a QMP command. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-18monitor: Convert do_set_link() to QObject, QErrorMarkus Armbruster1-3/+4
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-18monitor: Use argument type 'b' for set_linkMarkus Armbruster1-8/+2
Second argument is now "on" or "off" instead of "up" or "down". Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-18monitor: New commands netdev_add, netdev_delMarkus Armbruster1-0/+55
Monitor commands to go with -netdev. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-18error: Convert net_client_init() to QErrorMarkus Armbruster1-20/+18
The conversion is shallow: client type init() methods aren't converted. Converting them is a big job for relatively little practical benefit, so leave it for later. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-18error: Drop extra messages after qemu_opts_set() and qemu_opts_parse()Markus Armbruster1-2/+0
Both functions report errors nicely enough now, no need for additional messages. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-04-10net: remove broken net_set_boot_mask() boot device validationEduardo Habkost1-19/+0
There are many problems with net_set_boot_mask(): 1) It is broken when using the device model instead of "-net nic". Example: $ qemu-system-x86_64 -device rtl8139,vlan=0,id=net0,mac=52:54:00:82:41:fd,bus=pci.0,addr=0x4 -net user,vlan=0,name=hostnet0 -vnc 0.0.0.0:0 -boot n Cannot boot from non-existent NIC $ 2) The mask was previously used to set which boot ROMs were supposed to be loaded, but this was changed long time ago. Now all ROM images are loaded, and SeaBIOS takes care of jumping to the right boot entry point depending on the boot settings. 3) Interpretation and validation of the boot parameter letters is done on the machine type code. Examples: PC accepts only a,b,c,d,n as valid boot device letters. mac99 accepts only a,b,c,d,e,f. As a side-effect of this change, qemu-kvm won't abort anymore if using "-boot n" on a machine with no network devices. Checking if the requested boot device is valid is now a task for the BIOS or the machine-type code. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-10net: remove NICInfo.bootable fieldEduardo Habkost1-1/+0
It is just set by net_set_boot_mask() and never used. The logic for rom loading changed a lot since this field was introduced. It is not needed anymore. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01tap: add vhost/vhostfd optionsMichael S. Tsirkin1-0/+8
This adds vhost binary option to tap, to enable vhost net accelerator. Default is off for now, we'll be able to make default on long term when we know it's stable. vhostfd option can be used by management, to pass in the fd. Assigning vhostfd implies vhost=on. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-16qemu-option: Move the implied first name into QemuOptsListMarkus Armbruster1-2/+2
We sometimes permit omitting the first option name, for example -device foo is short for -device driver=foo. The name to use ("driver" in the example) is passed as argument to qemu_opts_parse(). For each QemuOptsList, we use at most one such name. Move the name into QemuOptsList, and pass whether to permit the abbreviation. This ensures continued consistency, and simplifies the commit after next in this series.
2010-03-16error: Replace qemu_error() by error_report()Markus Armbruster1-14/+14
error_report() terminates the message with a newline. Strip it it from its arguments. This fixes a few error messages lacking a newline: net_handle_fd_param()'s "No file descriptor named %s found", and tap_open()'s "vnet_hdr=1 requested, but no kernel support for IFF_VNET_HDR available" (all three versions). There's one place that passes arguments without newlines intentionally: load_vmstate(). Fix it up.
2010-03-09qdev: Catch attempt to attach more than one device to a netdevMarkus Armbruster1-0/+1
Guest device and host netdev are peers, i.e. it's a 1:1 relation. However, we fail to enforce that: $ qemu -nodefaults --nographic -netdev user,id=net0 -device e1000,netdev=net0 -device virtio-net-pci,netdev=net0 -monitor stdio QEMU 0.12.50 monitor - type 'help' for more information (qemu) info network Devices not on any VLAN: net0: net=10.0.2.0, restricted=n peer=virtio-net-pci.0 e1000.0: model=e1000,macaddr=52:54:00:12:34:56 peer=net0 virtio-net-pci.0: model=virtio-net-pci,macaddr=52:54:00:12:34:57 peer=net0 It's all downhill from there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08qdev: Add a DEV_NVECTORS_UNSPECIFIED enum for unspecified nr of MSI vectorsAmit Shah1-2/+4
net.c used a constant to signify no MSI vectors were specified. Extend that to all qdev devices. Signed-off-by: Amit Shah <amit.shah@redhat.com> Reported-by: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-21Allow const QemuOptDescBlue Swirl1-1/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-20Fix warning on OpenBSDBlue Swirl1-1/+1
/src/qemu/net.c: In function `net_check_clients': /src/qemu/net.c:1287: warning: `has_nic' might be used uninitialized in this function /src/qemu/net.c:1287: warning: `has_host_dev' might be used uninitialized in this function Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-19net: Monitor command set_link finds only VLAN clients, fixMarkus Armbruster1-0/+1
Clients not associated with a VLAN exist since commit d80b9fc6. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19net: info network shows only VLAN clients, fixMarkus Armbruster1-2/+9
Clients not associated with a VLAN exist since commit d80b9fc6. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19net: net_check_clients() checks only VLAN clients, fixMarkus Armbruster1-0/+7
Clients not associated with a VLAN exist since commit d80b9fc6. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19net: Fix bogus "Warning: vlan 0 with no nics" with -deviceMarkus Armbruster1-7/+18
net_check_clients() prints this when an VLAN has host devices, but no guest devices. It uses VLANState members nb_guest_devs and nb_host_devs to keep track of these devices. However, -device does not update nb_guest_devs, only net_init_nic() does that, for -net nic. Check the VLAN clients directly, and remove the counters. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19net: net_check_clients() runs too early to see -device, fixMarkus Armbruster1-3/+1
Call it right after -device devices get created. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19net: Remove unused net_client_uninit()Markus Armbruster1-14/+0
Unused since commit 9ad4531e. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>