aboutsummaryrefslogtreecommitdiff
path: root/monitor.c
AgeCommit message (Collapse)AuthorFilesLines
2019-03-11monitor: deprecate acl_show, acl_reset, acl_policy, acl_add, acl_removeDaniel P. Berrangé1-0/+23
The various ACL related commands are obsolete now that the QAuthZ framework for authorization is fully integrated throughout QEMU network services. These only ever worked with VNC and were never used by libvirt. Mark it as deprecated with no direct replacement to be provided. Authorization is now provided by using 'object_add' together with the 'tls-authz' or 'sasl-authz' parameters to the VNC server, and equivalent for other network services. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190227145755.26556-3-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-26authz: delete existing ACL implementationDaniel P. Berrange1-60/+119
The 'qemu_acl' type was a previous non-QOM based attempt to provide an authorization facility in QEMU. Because it is non-QOM based it cannot be created via the command line and requires special monitor commands to manipulate it. The new QAuthZ subclasses provide a superset of the functionality in qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor commands are converted to use the new QAuthZSimple data type instead in order to provide temporary backwards compatibility. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2019-02-18qmp: Deprecate query-events in favor of query-qmp-schemaMarkus Armbruster1-0/+5
query-events doesn't reflect compile-time configuration. Instead of fixing that, deprecate the command in favor of query-qmp-schema. Libvirt prefers query-qmp-schema as of commit 22d7222ec0 "qemu: caps: Don't call 'query-events' when we probe events from QMP schema". It'll be in the next release. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190214152251.2073-18-armbru@redhat.com>
2019-02-18qapi: make query-cpu-definitions depend on specific targetsMarc-André Lureau1-22/+0
It depends on TARGET_PPC || TARGET_ARM || TARGET_I386 || TARGET_S390X. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190214152251.2073-15-armbru@redhat.com>
2019-02-18qapi: make query-cpu-model-expansion depend on s390 or x86Marc-André Lureau1-3/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190214152251.2073-14-armbru@redhat.com>
2019-02-18qapi: make query-gic-capabilities depend on TARGET_ARMMarc-André Lureau1-11/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190214152251.2073-13-armbru@redhat.com>
2019-02-18qapi: make s390 commands depend on TARGET_S390XMarc-André Lureau1-14/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190214152251.2073-11-armbru@redhat.com>
2019-02-18qapi: make rtc-reset-reinjection and SEV depend on TARGET_I386Marc-André Lureau1-31/+0
Move rtc-reset-reinjection and SEV in target.json and make them conditional on TARGET_I386. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190214152251.2073-10-armbru@redhat.com>
2019-02-18qapi: Generate QAPIEvent stuff into separate filesMarkus Armbruster1-1/+1
Having to include qapi-events.h just for QAPIEvent is suboptimal, but quite tolerable now. It'll become problematic when we have events conditional on the target, because then qapi-events.h won't be usable from target-independent code anymore. Avoid that by generating it into separate files. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190214152251.2073-6-armbru@redhat.com>
2019-02-05monitor: do not use QTAILQ_FOREACH_SAFE across critical sectionsPaolo Bonzini1-3/+2
monitor_qmp_requests_pop_any_with_lock cannot modify the monitor list concurrently with monitor_cleanup, since the dispatch bottom half runs in the main thread, but anyway it is a bit ugly to keep "next" live across critical sections of monitor_lock and Coverity complains (CID 1397072). Replace QTAILQ_FOREACH_SAFE with a while loop and QTAILQ_FIRST, it is cleaner and more future-proof. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-24qapi: Eliminate indirection through qmp_event_get_func_emit()Markus Armbruster1-3/+1
The qapi_event_send_FOO() functions emit events like this: QMPEventFuncEmit emit; emit = qmp_event_get_func_emit(); if (!emit) { return; } qmp = qmp_event_build_dict("FOO"); [put event arguments into @qmp...] emit(QAPI_EVENT_FOO, qmp); The value of qmp_event_get_func_emit() depends only on the program: * In qemu-system-FOO, it's always monitor_qapi_event_queue. * In tests/test-qmp-event, it's always event_test_emit. * In all other programs, it's always null. This is exactly the kind of dependence the linker is supposed to resolve; we don't actually need an indirection. Note that things would fall apart if we linked more than one QAPI schema into a single program: each set of qapi_event_send_FOO() uses its own event enumeration, yet they share a single emit function. Which takes the event enumeration as an argument. Which one if there's more than one? More seriously: how does this work even now? qemu-system-FOO wants QAPIEvent, and passes a function taking that to qmp_event_set_func_emit(). test-qmp-event wants test_QAPIEvent, and passes a function taking that to qmp_event_set_func_emit(). It works by type trickery, of course: typedef void (*QMPEventFuncEmit)(unsigned event, QDict *dict); void qmp_event_set_func_emit(QMPEventFuncEmit emit); QMPEventFuncEmit qmp_event_get_func_emit(void); We use unsigned instead of the enumeration type. Relies on both enumerations boiling down to unsigned, which happens to be true for the compilers we use. Clean this up as follows: * Generate qapi_event_send_FOO() that call PREFIX_qapi_event_emit() instead of the value of qmp_event_set_func_emit(). * Generate a prototype for PREFIX_qapi_event_emit() into qapi-events.h. * PREFIX_ is empty for qapi/qapi-schema.json, and test_ for tests/qapi-schema/qapi-schema-test.json. It's qga_ for qga/qapi-schema.json, and doc-good- for tests/qapi-schema/doc-good.json, but those don't define any events. * Rename monitor_qapi_event_queue() to qapi_event_emit() instead of passing it to qmp_event_set_func_emit(). This takes care of qemu-system-FOO. * Rename event_test_emit() to test_qapi_event_emit() instead of passing it to qmp_event_set_func_emit(). This takes care of tests/test-qmp-event. * Add a qapi_event_emit() that does nothing to stubs/monitor.c. This takes care of all other programs that link code emitting QMP events. * Drop qmp_event_set_func_emit(), qmp_event_get_func_emit(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20181218182234.28876-3-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [Commit message typos fixed]
2019-01-11qemu/queue.h: leave head structs anonymous unless necessaryPaolo Bonzini1-2/+2
Most list head structs need not be given a name. In most cases the name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV or reverse iteration, but this does not apply to lists of other kinds, and even for QTAILQ in practice this is only rarely needed. In addition, we will soon reimplement those macros completely so that they do not need a name for the head struct. So clean up everything, not giving a name except in the rare case where it is necessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-16Merge remote-tracking branch 'remotes/pmaydell/tags/pull-misc-20181214' into ↵Peter Maydell1-1/+7
staging miscellaneous patches: * checkpatch.pl: Enforce multiline comment syntax * Rename cpu_physical_memory_write_rom() to address_space_write_rom() * disas, monitor, elf_ops: Use address_space_read() to read memory * Remove load_image() in favour of load_image_size() * Fix some minor memory leaks in arm boards/devices * virt: fix broken indentation # gpg: Signature made Fri 14 Dec 2018 14:41:20 GMT # gpg: using RSA key 3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-misc-20181214: (22 commits) virt: Fix broken indentation target/arm: Create timers in realize, not init tests/test-arm-mptimer: Don't leak string memory hw/sd/sdhci: Don't leak memory region in sdhci_sysbus_realize() hw/arm/mps2-tz.c: Free mscname string in make_dma() target/arm: Free name string in ARMCPRegInfo hashtable entries include/hw/loader.h: Document load_image_size() hw/core/loader.c: Remove load_image() device_tree.c: Don't use load_image() hw/block/tc58128.c: Don't use load_image() hw/i386/multiboot.c: Don't use load_image() hw/i386/pc.c: Don't use load_image() hw/pci/pci.c: Don't use load_image() hw/smbios/smbios.c: Don't use load_image() hw/ppc/ppc405_boards: Don't use load_image() hw/ppc/mac_newworld, mac_oldworld: Don't use load_image() elf_ops.h: Use address_space_write() to write memory monitor: Use address_space_read() to read memory disas.c: Use address_space_read() to read memory Rename cpu_physical_memory_write_rom() to address_space_write_rom() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-14monitor: Use address_space_read() to read memoryPeter Maydell1-1/+7
Currently monitor.c reads physical memory using cpu_physical_memory_read(). This effectively hard-codes assuming that all CPUs have the same view of physical memory. Switch to address_space_read() instead, which lets us use the AddressSpace for the CPU we're reading memory for (falling back to address_space_memory if there is no CPU, as happens with the "none" board). As a bonus, this allows us to detect failures to read memory. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181122172653.3413-3-peter.maydell@linaro.org
2018-12-14qapi: add conditions to REPLICATION type/commands on the schemaMarc-André Lureau1-5/+0
Add #if defined(CONFIG_REPLICATION) in generated code, and adjust the code accordingly. Made conditional: * xen-set-replication, query-xen-replication-status, xen-colo-do-checkpoint Before the patch, we first register the commands unconditionally in generated code (requires a stub), then conditionally unregister in qmp_unregister_commands_hack(). Afterwards, we register only when CONFIG_REPLICATION. The command fails exactly the same, with CommandNotFound. Improvement, because now query-qmp-schema is accurate, and we're one step closer to killing qmp_unregister_commands_hack(). * enum BlockdevDriver value "replication" in command blockdev-add * BlockdevOptions variant @replication and related structures. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20181213123724.4866-23-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-13cutils: Fix qemu_strtosz() & friends to reject non-finite sizesDavid Hildenbrand1-1/+1
qemu_strtosz() & friends reject NaNs, but happily accept infinities. They shouldn't. Fix that. The fix makes use of qemu_strtod_finite(). To avoid ugly casts, change the @end parameter of qemu_strtosz() & friends from char ** to const char **. Also, add two test cases, testing that "inf" and "NaN" are properly rejected. While at it, also fixup the function documentation. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181121164421.20780-3-david@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-12monitor: Remove "x-oob", offer capability "oob" unconditionallyPeter Xu1-18/+5
Out-of-band command execution was introduced in commit cf869d53172. Unfortunately, we ran into a regression, and had to turn it into an experimental option for 2.12 (commit be933ffc23). http://lists.gnu.org/archive/html/qemu-devel/2018-03/msg06231.html The regression has since been fixed (commit 951702f39c7 "monitor: bind dispatch bh to iohandler context"). A thorough re-review of OOB commands led to a few more issues, which have also been addressed. This patch partly reverts be933ffc23 (monitor: new parameter "x-oob"), and makes QMP monitors again offer capability "oob" whenever they can provide it, i.e. when the monitor's character device is capable of running in an I/O thread. Some trivial touch-up in the test code is required to make sure qmp-test won't break. Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20181009062718.1914-4-peterx@redhat.com> [Conflict with "monitor: check if chardev can switch gcontext for OOB" resolved, commit message updated] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-12monitor: Suspend monitor instead dropping commandsPeter Xu1-29/+23
When a QMP client sends in-band commands more quickly that we can process them, we can either queue them without limit (QUEUE), drop commands when the queue is full (DROP), or suspend receiving commands when the queue is full (SUSPEND). None of them is ideal: * QUEUE lets a misbehaving client make QEMU eat memory without bounds. Not such a hot idea. * With DROP, the client has to cope with dropped in-band commands. To inform the client, we send a COMMAND_DROPPED event then. The event is flawed by design in two ways: it's ambiguous (see commit d621cfe0a17), and it brings back the "eat memory without bounds" problem. * With SUSPEND, the client has to manage the flow of in-band commands to keep the monitor available for out-of-band commands. We currently DROP. Switch to SUSPEND. Managing the flow of in-band commands to keep the monitor available for out-of-band commands isn't really hard: just count the number of "outstanding" in-band commands (commands sent minus replies received), and if it exceeds the limit, hold back additional ones until it drops below the limit again. Note that we need to be careful pairing the suspend with a resume, or else the monitor will hang, possibly forever. And here since we need to make sure both: (1) popping request from the req queue, and (2) reading length of the req queue will be in the same critical section, we let the pop function take the corresponding queue lock when there is a request, then we release the lock from the caller. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20181009062718.1914-2-peterx@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-12monitor: avoid potential dead-lock when cleaning upMarc-André Lureau1-0/+3
When a monitor is connected to a Spice chardev, the monitor cleanup can dead-lock: #0 0x00007f43446637fd in __lll_lock_wait () at /lib64/libpthread.so.0 #1 0x00007f434465ccf4 in pthread_mutex_lock () at /lib64/libpthread.so.0 #2 0x0000556dd79f22ba in qemu_mutex_lock_impl (mutex=0x556dd81c9220 <monitor_lock>, file=0x556dd7ae3648 "/home/elmarco/src/qq/monitor.c", line=645) at /home/elmarco/src/qq/util/qemu-thread-posix.c:66 #3 0x0000556dd7431bd5 in monitor_qapi_event_queue (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x556dd9abc850, errp=0x7fffb7bbddd8) at /home/elmarco/src/qq/monitor.c:645 #4 0x0000556dd79d476b in qapi_event_send_spice_disconnected (server=0x556dd98ee760, client=0x556ddaaa8560, errp=0x556dd82180d0 <error_abort>) at qapi/qapi-events-ui.c:149 #5 0x0000556dd7870fc1 in channel_event (event=3, info=0x556ddad1b590) at /home/elmarco/src/qq/ui/spice-core.c:235 #6 0x00007f434560a6bb in reds_handle_channel_event (reds=<optimized out>, event=3, info=0x556ddad1b590) at reds.c:316 #7 0x00007f43455f393b in main_dispatcher_self_handle_channel_event (info=0x556ddad1b590, event=3, self=0x556dd9a7d8c0) at main-dispatcher.c:197 #8 0x00007f43455f393b in main_dispatcher_channel_event (self=0x556dd9a7d8c0, event=event@entry=3, info=0x556ddad1b590) at main-dispatcher.c:197 #9 0x00007f4345612833 in red_stream_push_channel_event (s=s@entry=0x556ddae2ef40, event=event@entry=3) at red-stream.c:414 #10 0x00007f434561286b in red_stream_free (s=0x556ddae2ef40) at red-stream.c:388 #11 0x00007f43455f9ddc in red_channel_client_finalize (object=0x556dd9bb21a0) at red-channel-client.c:347 #12 0x00007f434b5f9fb9 in g_object_unref () at /lib64/libgobject-2.0.so.0 #13 0x00007f43455fc212 in red_channel_client_push (rcc=0x556dd9bb21a0) at red-channel-client.c:1341 #14 0x0000556dd76081ba in spice_port_set_fe_open (chr=0x556dd9925e20, fe_open=0) at /home/elmarco/src/qq/chardev/spice.c:241 #15 0x0000556dd796d74a in qemu_chr_fe_set_open (be=0x556dd9a37c00, fe_open=0) at /home/elmarco/src/qq/chardev/char-fe.c:340 #16 0x0000556dd796d4d9 in qemu_chr_fe_set_handlers (b=0x556dd9a37c00, fd_can_read=0x0, fd_read=0x0, fd_event=0x0, be_change=0x0, opaque=0x0, context=0x0, set_open=true) at /home/elmarco/src/qq/chardev/char-fe.c:280 #17 0x0000556dd796d359 in qemu_chr_fe_deinit (b=0x556dd9a37c00, del=false) at /home/elmarco/src/qq/chardev/char-fe.c:233 #18 0x0000556dd7432240 in monitor_data_destroy (mon=0x556dd9a37c00) at /home/elmarco/src/qq/monitor.c:786 #19 0x0000556dd743b968 in monitor_cleanup () at /home/elmarco/src/qq/monitor.c:4683 #20 0x0000556dd75ce776 in main (argc=3, argv=0x7fffb7bbe458, envp=0x7fffb7bbe478) at /home/elmarco/src/qq/vl.c:4660 Because spice code tries to emit a "disconnected" signal on the monitors. Fix this dead-lock by releasing the monitor lock for flush/destroy. monitor_lock protects mon_list, monitor_qapi_event_state and monitor_destroyed. monitor_flush() and monitor_data_destroy() don't access any of those variables. monitor_cleanup()'s loop is safe because it uses QTAILQ_FOREACH_SAFE(), and no further monitor can be added after calling monitor_cleanup() thanks to monitor_destroyed check in monitor_list_append(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20181205203737.9011-8-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-12monitor: prevent inserting new monitors after cleanupMarc-André Lureau1-2/+17
monitor_cleanup() is one of the last things main() calls before it returns. In the following patch, monitor_cleanup() will release the monitor_lock during flushing. There may be pending commands to insert new monitors, which would modify the mon_list during iteration, and the clean-up could thus miss those new insertions. Add a monitor_destroyed global to check if monitor_cleanup() has been already called. In this case, don't insert the new monitor in the list, but free it instead. A cleaner solution would involve the main thread telling other threads to terminate, waiting for their termination. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20181205203737.9011-7-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-12monitor: check if chardev can switch gcontext for OOBMarc-André Lureau1-2/+3
Not all backends are able to switch gcontext. Those backends cannot drive a OOB monitor (the monitor would then be blocking on main thread). For example, ringbuf, spice, or more esoteric input chardevs like braille or MUX. We already forbid MUX because not all frontends are ready to run outside main loop. Replace that by a context-switching feature check. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181205203737.9011-5-marcandre.lureau@redhat.com> [Error condition simplified, commit message adjusted accordingly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-12monitor: accept chardev input from iothreadMarc-André Lureau1-10/+19
Chardev backends may not handle safely IO events from concurrent threads (may not handle I/O events from concurrent threads safely, only the write path is since commit > 9005b2a7589540a3733b3abdcfbccfe7746cd1a1). Better to wake up the chardev from the monitor IO thread if it's being used as the chardev context. Unify code paths by using a BH in all cases. Drop the now redundant aio_notify() call. Clean up control flow not to rely on mon->use_io_thread implying monitor_is_qmp(mon). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20181205203737.9011-3-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-12monitor: inline ambiguous helper functionsMarc-André Lureau1-12/+2
The function were not named with "mon_iothread", or following the AIO vs GMainContext distinction. Inline them instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20181205203737.9011-2-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-11-06monitor: delay monitor iothread creationWolfgang Bumiller1-14/+21
Commit d32749deb615 moved the call to monitor_init_globals() to before os_daemonize(), making it an unsuitable place to spawn the monitor iothread as it won't be inherited over the fork() in os_daemonize(). We now spawn the thread the first time we instantiate a monitor which actually has use_io_thread == true. Instantiation of monitors happens only after os_daemonize(). We still need to create the qmp_dispatcher_bh when not using iothreads, so this now still happens in monitor_init_globals(). Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Fixes: d32749deb615 ("monitor: move init global earlier") Message-Id: <20180925081507.11873-3-w.bumiller@proxmox.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Peter Xu <peterx@redhat.com> [This fixes a crash on shutdown with --daemonize] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-11-06monitor: guard iothread access by mon->use_io_threadWolfgang Bumiller1-1/+1
monitor_resume() and monitor_suspend() both want to "kick" the I/O thread if it is there, but in monitor_suspend() lacked the use_io_thread flag condition. This is required when we later only spawn the thread on first use. Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20180925081507.11873-2-w.bumiller@proxmox.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-10-18tcg: distribute tcg_time into TCG contextsEmilio G. Cota1-3/+10
When we implemented per-vCPU TCG contexts, we forgot to also distribute the tcg_time counter, which has remained as a global accessed without any serialization, leading to potentially missed counts. Fix it by distributing the field over the TCG contexts, embedding it into TCGProfile with a field called "cpu_exec_time", which is more descriptive than "tcg_time". Add a function to query this value directly, and for completeness, fill in the field in tcg_profile_snapshot, even though its callers do not use it. Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181010144853.13005-5-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-05qdev-monitor: print help to stdoutMarc-André Lureau1-3/+13
qdev_device_help() is used from command line "-device help", or from HMP "device_add". If used from command line, print help to stdout (it is only printed on explicit demand). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-09-25monitor: print message when using 'help' with an unknown commandCollin Walling1-1/+8
When typing 'help' followed by an unknown command, QEMU will not print anything to the command line to let the user know they typed a bad command. Let's fix this by printing a message to the monitor when this happens. For example: (qemu) help xyz unknown command: 'xyz' Reported-by: Stefan Zimmermann <stzi@linux.ibm.com> Signed-off-by: Collin Walling <walling@linux.ibm.com> Message-Id: <1532115624-27568-1-git-send-email-walling@linux.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-09-24Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2018-09-01' ↵Peter Maydell1-137/+13
into staging Monitor patches for 2018-09-01 # gpg: Signature made Sat 01 Sep 2018 12:06:52 BST # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-monitor-2018-09-01: monitor: no need to save need_resume Revert "qmp: isolate responses into io thread" qmp: constify qmp_is_oob() monitor: consitify qmp_send_response() QDict argument monitor: accept input on resume monitor: simplify monitor_qmp_setup_handlers_bh Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-30monitor: no need to save need_resumeMarc-André Lureau1-9/+4
There is no need for per-command need_resume granularity, it should resume after running an non-oob command on oob-disabled monitor. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180829134043.31706-5-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-30Revert "qmp: isolate responses into io thread"Marc-André Lureau1-117/+3
This reverts commit abe3cd0ff7f774966da6842620806ab7576fe4f3. There is no need to add an additional queue to send the reply to the IOThread, because QMP response is thread safe, and chardev write path is thread safe. It will schedule the watcher in the associated IOThread. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180829134043.31706-4-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-30monitor: consitify qmp_send_response() QDict argumentMarc-André Lureau1-2/+2
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180829134043.31706-2-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-28monitor: accept input on resumeMarc-André Lureau1-0/+1
A chardev may stop trying to write if the associated can_read() callback returned 0. This happens when the monitor is suspended. The frontend is supposed to call qemu_chr_fe_accept_input() when it is ready to accept data again. An issue was observed with a spice port: pending commands may be delayed, as the chardev is not flushed. Most chardev don't use the accept_input() callback, and instead check regularly if they can write. The ones that do use it are braille, mux, msmouse, spice (abstract), spicevmc, spiceport, wctablet. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180817173752.19136-1-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-28qapi: Drop qapi_event_send_FOO()'s Error ** argumentPeter Xu1-3/+2
The generated qapi_event_send_FOO() take an Error ** argument. They can't actually fail, because all they do with the argument is passing it to functions that can't fail: the QObject output visitor, and the @qmp_emit callback, which is either monitor_qapi_event_queue() or event_test_emit(). Drop the argument, and pass &error_abort to the QObject output visitor and @qmp_emit instead. Suggested-by: Eric Blake <eblake@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180815133747.25032-4-peterx@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message rewritten, update to qapi-code-gen.txt corrected] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-28monitor: simplify monitor_qmp_setup_handlers_bhPeter Xu1-9/+3
When we reach monitor_qmp_setup_handlers_bh() we must be using the IOThread then, so no need to check against it any more. Instead, we assert. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180815133747.25032-2-peterx@redhat.com> [Insufficiently useful comment dropped] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-24json: Clean up headersMarkus Armbruster1-1/+1
The JSON parser has three public headers, json-lexer.h, json-parser.h, json-streamer.h. They all contain stuff that is of no interest outside qobject/json-*.c. Collect the public interface in include/qapi/qmp/json-parser.h, and everything else in qobject/json-parser-int.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180823164025.12553-54-armbru@redhat.com>
2018-08-24json: Pass lexical errors and limit violations to callbackMarkus Armbruster1-4/+1
The callback to consume JSON values takes QObject *json, Error *err. If both are null, the callback is supposed to make up an error by itself. This sucks. qjson.c's consume_json() neglects to do so, which makes qobject_from_json() null instead of failing. I consider that a bug. The culprit is json_message_process_token(): it passes two null pointers when it runs into a lexical error or a limit violation. Fix it to pass a proper Error object then. Update the callbacks: * monitor.c's handle_qmp_command(): the code to make up an error is now dead, drop it. * qga/main.c's process_event(): lumps the "both null" case together with the "not a JSON object" case. The former is now gone. The error message "Invalid JSON syntax" is misleading for the latter. Improve it to "Input must be a JSON object". * qobject/qjson.c's consume_json(): no update; check-qjson demonstrates qobject_from_json() now sets an error on lexical errors, but still doesn't on some other errors. * tests/libqtest.c's qmp_response(): the Error object is now reliable, so use it to improve the error message. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180823164025.12553-40-armbru@redhat.com>
2018-08-24json: Redesign the callback to consume JSON valuesMarkus Armbruster1-10/+8
The classical way to structure parser and lexer is to have the client call the parser to get an abstract syntax tree, the parser call the lexer to get the next token, and the lexer call some function to get input characters. Another way to structure them would be to have the client feed characters to the lexer, the lexer feed tokens to the parser, and the parser feed abstract syntax trees to some callback provided by the client. This way is more easily integrated into an event loop that dispatches input characters as they arrive. Our JSON parser is kind of between the two. The lexer feeds tokens to a "streamer" instead of a real parser. The streamer accumulates tokens until it got the sequence of tokens that comprise a single JSON value (it counts curly braces and square brackets to decide). It feeds those token sequences to a callback provided by the client. The callback passes each token sequence to the parser, and gets back an abstract syntax tree. I figure it was done that way to make a straightforward recursive descent parser possible. "Get next token" becomes "pop the first token off the token sequence". Drawback: we need to store a complete token sequence. Each token eats 13 + input characters + malloc overhead bytes. Observations: 1. This is not the only way to use recursive descent. If we replaced "get next token" by a coroutine yield, we could do without a streamer. 2. The lexer reports errors by passing a JSON_ERROR token to the streamer. This communicates the offending input characters and their location, but no more. 3. The streamer reports errors by passing a null token sequence to the callback. The (already poor) lexical error information is thrown away. 4. Having the callback receive a token sequence duplicates the code to convert token sequence to abstract syntax tree in every callback. 5. Known bug: the streamer silently drops incomplete token sequences. This commit rectifies 4. by lifting the call of the parser from the callbacks into the streamer. Later commits will address 3. and 5. The lifting removes a bug from qjson.c's parse_json(): it passed a pointer to a non-null Error * in certain cases, as demonstrated by check-qjson.c. json_parser_parse() is now unused. It's a stupid wrapper around json_parser_parse_err(). Drop it, and rename json_parser_parse_err() to json_parser_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180823164025.12553-35-armbru@redhat.com>
2018-08-23hmp-commands-info: add sync-profileEmilio G. Cota1-0/+11
The command introduced here is just for developers. This means that: - the info displayed and the output format could change in the future - the command is only meant to be used from HMP, not from QMP Sample output: (qemu) sync-profile sync-profile is off (qemu) info sync-profile Type Object Call site Wait Time (s) Count Average (us) ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- (qemu) sync-profile on (qemu) sync-profile sync-profile is on (qemu) info sync-profile 15 Type Object Call site Wait Time (s) Count Average (us) ---------------------------------------------------------------------------------------------- condvar 0x55a01813ced0 cpus.c:1165 91.38235 2842 32154.24 BQL mutex 0x55a0171b7140 cpus.c:1434 12.56490 5787 2171.23 BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:432 7.75846 2844 2728.01 BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:870 5.09889 2884 1767.99 BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:529 3.46140 3254 1063.74 BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:804 0.76333 8655 88.20 BQL mutex 0x55a0171b7140 cpus.c:1466 0.60893 2941 207.05 BQL mutex 0x55a0171b7140 util/main-loop.c:236 0.00894 6425 1.39 mutex [ 3] util/qemu-timer.c:520 0.00342 50611 0.07 mutex [ 2] util/qemu-timer.c:426 0.00254 31336 0.08 mutex [ 3] util/qemu-timer.c:234 0.00107 19275 0.06 mutex 0x55a0171d9960 vl.c:763 0.00043 6425 0.07 mutex 0x55a0180d1bb0 monitor.c:458 0.00015 1603 0.09 mutex 0x55a0180e4c78 chardev/char.c:109 0.00002 217 0.08 mutex 0x55a0180d1bb0 monitor.c:448 0.00001 162 0.08 ---------------------------------------------------------------------------------------------- (qemu) info sync-profile -m 15 Type Object Call site Wait Time (s) Count Average (us) ---------------------------------------------------------------------------------------------- condvar 0x55a01813ced0 cpus.c:1165 95.11196 3051 31174.03 BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:432 7.92108 3052 2595.37 BQL mutex 0x55a0171b7140 cpus.c:1434 13.38253 6210 2155.00 BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:870 5.09901 3093 1648.57 BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:529 4.21123 3468 1214.31 BQL mutex 0x55a0171b7140 cpus.c:1466 0.60895 3156 192.95 BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:804 0.76337 9282 82.24 BQL mutex 0x55a0171b7140 util/main-loop.c:236 0.00944 6889 1.37 mutex 0x55a01813ce80 tcg/tcg.c:397 0.00000 24 0.15 mutex 0x55a0180d1bb0 monitor.c:458 0.00018 1922 0.09 mutex [ 2] util/qemu-timer.c:426 0.00266 32710 0.08 mutex 0x55a0180e4c78 chardev/char.c:109 0.00002 260 0.08 mutex 0x55a0180d1bb0 monitor.c:448 0.00001 187 0.08 mutex 0x55a0171d9960 vl.c:763 0.00047 6889 0.07 mutex [ 3] util/qemu-timer.c:520 0.00362 53377 0.07 ---------------------------------------------------------------------------------------------- (qemu) info sync-profile -m -n 15 Type Object Call site Wait Time (s) Count Average (us) ---------------------------------------------------------------------------------------------- condvar 0x55a01813ced0 cpus.c:1165 101.39331 3398 29839.12 BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:432 7.92112 3399 2330.43 BQL mutex 0x55a0171b7140 cpus.c:1434 14.28280 6922 2063.39 BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:870 5.77505 3445 1676.36 BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:529 5.66139 3883 1457.99 BQL mutex 0x55a0171b7140 cpus.c:1466 0.60901 3519 173.06 BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:804 0.76351 10338 73.85 BQL mutex 0x55a0171b7140 util/main-loop.c:236 0.01032 7664 1.35 mutex 0x55a0180e4f08 util/qemu-timer.c:426 0.00041 901 0.45 mutex 0x55a01813ce80 tcg/tcg.c:397 0.00000 24 0.15 mutex 0x55a0180d1bb0 monitor.c:458 0.00022 2319 0.09 mutex 0x55a0180e4c78 chardev/char.c:109 0.00003 306 0.08 mutex 0x55a0180e4f08 util/qemu-timer.c:520 0.00068 8565 0.08 mutex 0x55a0180d1bb0 monitor.c:448 0.00002 215 0.08 mutex 0x55a0180e4f78 util/qemu-timer.c:426 0.00247 34224 0.07 ---------------------------------------------------------------------------------------------- (qemu) sync-profile reset (qemu) info sync-profile -m 2 Type Object Call site Wait Time (s) Count Average (us) -------------------------------------------------------------------------------------------- condvar 0x55a01813ced0 cpus.c:1165 2.78756 99 28157.12 BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:870 0.33054 102 3240.55 -------------------------------------------------------------------------------------------- (qemu) sync-profile off (qemu) sync-profile sync-profile is off (qemu) sync-profile reset (qemu) info sync-profile Type Object Call site Wait Time (s) Count Average (us) ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-15monitor: fix oob command leakMarc-André Lureau1-0/+2
Spotted by ASAN, during make check... Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f8e27262c48 in malloc (/lib64/libasan.so.5+0xeec48) #1 0x7f8e26a5f3c5 in g_malloc (/lib64/libglib-2.0.so.0+0x523c5) #2 0x555ab67078a8 in qstring_from_str /home/elmarco/src/qq/qobject/qstring.c:67 #3 0x555ab67071e4 in qstring_new /home/elmarco/src/qq/qobject/qstring.c:24 #4 0x555ab6713fbf in qstring_from_escaped_str /home/elmarco/src/qq/qobject/json-parser.c:144 #5 0x555ab671738c in parse_literal /home/elmarco/src/qq/qobject/json-parser.c:506 #6 0x555ab67179c3 in parse_value /home/elmarco/src/qq/qobject/json-parser.c:569 #7 0x555ab6715123 in parse_pair /home/elmarco/src/qq/qobject/json-parser.c:306 #8 0x555ab6715483 in parse_object /home/elmarco/src/qq/qobject/json-parser.c:357 #9 0x555ab671798b in parse_value /home/elmarco/src/qq/qobject/json-parser.c:561 #10 0x555ab6717a6b in json_parser_parse_err /home/elmarco/src/qq/qobject/json-parser.c:592 #11 0x555ab4fd4dcf in handle_qmp_command /home/elmarco/src/qq/monitor.c:4257 #12 0x555ab6712c4d in json_message_process_token /home/elmarco/src/qq/qobject/json-streamer.c:105 #13 0x555ab67e01e2 in json_lexer_feed_char /home/elmarco/src/qq/qobject/json-lexer.c:323 #14 0x555ab67e0af6 in json_lexer_feed /home/elmarco/src/qq/qobject/json-lexer.c:373 #15 0x555ab6713010 in json_message_parser_feed /home/elmarco/src/qq/qobject/json-streamer.c:124 #16 0x555ab4fd58ec in monitor_qmp_read /home/elmarco/src/qq/monitor.c:4337 #17 0x555ab6559df2 in qemu_chr_be_write_impl /home/elmarco/src/qq/chardev/char.c:175 #18 0x555ab6559e95 in qemu_chr_be_write /home/elmarco/src/qq/chardev/char.c:187 #19 0x555ab6560127 in fd_chr_read /home/elmarco/src/qq/chardev/char-fd.c:66 #20 0x555ab65d9c73 in qio_channel_fd_source_dispatch /home/elmarco/src/qq/io/channel-watch.c:84 #21 0x7f8e26a598ac in g_main_context_dispatch (/lib64/libglib-2.0.so.0+0x4c8ac) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180809114417.28718-4-marcandre.lureau@redhat.com> [Screwed up in commit b27314567d4] Cc: qemu-stable@nongnu.org Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-31monitor: temporary fix for dead-lock on event recursionMarc-André Lureau1-1/+43
With a Spice port chardev, it is possible to reenter monitor_qapi_event_queue() (when the client disconnects for example). This will dead-lock on monitor_lock. Instead, use some TLS variables to check for recursion and queue the events. Fixes: (gdb) bt #0 0x00007fa69e7217fd in __lll_lock_wait () at /lib64/libpthread.so.0 #1 0x00007fa69e71acf4 in pthread_mutex_lock () at /lib64/libpthread.so.0 #2 0x0000563303567619 in qemu_mutex_lock_impl (mutex=0x563303d3e220 <monitor_lock>, file=0x5633036589a8 "/home/elmarco/src/qq/monitor.c", line=645) at /home/elmarco/src/qq/util/qemu-thread-posix.c:66 #3 0x0000563302fa6c25 in monitor_qapi_event_queue (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x56330602bde0, errp=0x7ffc6ab5e728) at /home/elmarco/src/qq/monitor.c:645 #4 0x0000563303549aca in qapi_event_send_spice_disconnected (server=0x563305afd630, client=0x563305745360, errp=0x563303d8d0f0 <error_abort>) at qapi/qapi-events-ui.c:149 #5 0x00005633033e600f in channel_event (event=3, info=0x5633061b0050) at /home/elmarco/src/qq/ui/spice-core.c:235 #6 0x00007fa69f6c86bb in reds_handle_channel_event (reds=<optimized out>, event=3, info=0x5633061b0050) at reds.c:316 #7 0x00007fa69f6b193b in main_dispatcher_self_handle_channel_event (info=0x5633061b0050, event=3, self=0x563304e088c0) at main-dispatcher.c:197 #8 0x00007fa69f6b193b in main_dispatcher_channel_event (self=0x563304e088c0, event=event@entry=3, info=0x5633061b0050) at main-dispatcher.c:197 #9 0x00007fa69f6d0833 in red_stream_push_channel_event (s=s@entry=0x563305ad8f50, event=event@entry=3) at red-stream.c:414 #10 0x00007fa69f6d086b in red_stream_free (s=0x563305ad8f50) at red-stream.c:388 #11 0x00007fa69f6b7ddc in red_channel_client_finalize (object=0x563304df2360) at red-channel-client.c:347 #12 0x00007fa6a56b7fb9 in g_object_unref () at /lib64/libgobject-2.0.so.0 #13 0x00007fa69f6ba212 in red_channel_client_push (rcc=0x563304df2360) at red-channel-client.c:1341 #14 0x00007fa69f68b259 in red_char_device_send_msg_to_client (client=<optimized out>, msg=0x5633059b6310, dev=0x563304e08bc0) at char-device.c:305 #15 0x00007fa69f68b259 in red_char_device_send_msg_to_clients (msg=0x5633059b6310, dev=0x563304e08bc0) at char-device.c:305 #16 0x00007fa69f68b259 in red_char_device_read_from_device (dev=0x563304e08bc0) at char-device.c:353 #17 0x000056330317d01d in spice_chr_write (chr=0x563304cafe20, buf=0x563304cc50b0 "{\"timestamp\": {\"seconds\": 1532944763, \"microseconds\": 326636}, \"event\": \"SHUTDOWN\", \"data\": {\"guest\": false}}\r\n", len=111) at /home/elmarco/src/qq/chardev/spice.c:199 #18 0x00005633034deee7 in qemu_chr_write_buffer (s=0x563304cafe20, buf=0x563304cc50b0 "{\"timestamp\": {\"seconds\": 1532944763, \"microseconds\": 326636}, \"event\": \"SHUTDOWN\", \"data\": {\"guest\": false}}\r\n", len=111, offset=0x7ffc6ab5ea70, write_all=false) at /home/elmarco/src/qq/chardev/char.c:112 #19 0x00005633034df054 in qemu_chr_write (s=0x563304cafe20, buf=0x563304cc50b0 "{\"timestamp\": {\"seconds\": 1532944763, \"microseconds\": 326636}, \"event\": \"SHUTDOWN\", \"data\": {\"guest\": false}}\r\n", len=111, write_all=false) at /home/elmarco/src/qq/chardev/char.c:147 #20 0x00005633034e1e13 in qemu_chr_fe_write (be=0x563304dbb800, buf=0x563304cc50b0 "{\"timestamp\": {\"seconds\": 1532944763, \"microseconds\": 326636}, \"event\": \"SHUTDOWN\", \"data\": {\"guest\": false}}\r\n", len=111) at /home/elmarco/src/qq/chardev/char-fe.c:42 #21 0x0000563302fa6334 in monitor_flush_locked (mon=0x563304dbb800) at /home/elmarco/src/qq/monitor.c:425 #22 0x0000563302fa6520 in monitor_puts (mon=0x563304dbb800, str=0x563305de7e9e "") at /home/elmarco/src/qq/monitor.c:468 #23 0x0000563302fa680c in qmp_send_response (mon=0x563304dbb800, rsp=0x563304df5730) at /home/elmarco/src/qq/monitor.c:517 #24 0x0000563302fa6905 in qmp_queue_response (mon=0x563304dbb800, rsp=0x563304df5730) at /home/elmarco/src/qq/monitor.c:538 #25 0x0000563302fa6b5b in monitor_qapi_event_emit (event=QAPI_EVENT_SHUTDOWN, qdict=0x563304df5730) at /home/elmarco/src/qq/monitor.c:624 #26 0x0000563302fa6c4b in monitor_qapi_event_queue (event=QAPI_EVENT_SHUTDOWN, qdict=0x563304df5730, errp=0x7ffc6ab5ed00) at /home/elmarco/src/qq/monitor.c:649 #27 0x0000563303548cce in qapi_event_send_shutdown (guest=false, errp=0x563303d8d0f0 <error_abort>) at qapi/qapi-events-run-state.c:58 #28 0x000056330313bcd7 in main_loop_should_exit () at /home/elmarco/src/qq/vl.c:1822 #29 0x000056330313bde3 in main_loop () at /home/elmarco/src/qq/vl.c:1862 #30 0x0000563303143781 in main (argc=3, argv=0x7ffc6ab5f068, envp=0x7ffc6ab5f088) at /home/elmarco/src/qq/vl.c:4644 Note that error report is now moved to the first caller, which may receive an error for a recursed event. This is probably fine (95% of callers use &error_abort, the rest have NULL error and ignore it) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180731150144.14022-1-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [*_no_recurse renamed to *_no_reenter, local variables reordered] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-23monitor: Fix unsafe sharing of @cur_mon among threadsPeter Xu1-1/+1
@cur_mon is null unless the main thread is running monitor code, either HMP code within monitor_read(), or QMP code within monitor_qmp_dispatch(). Use of @cur_mon outside the main thread is therefore unsafe. Most of its uses are in monitor command handlers. These run in the main thread. However, there are also uses hiding elsewhere, such as in error_vprintf(), and thus error_report(), making these functions unsafe outside the main thread. No such unsafe uses are known at this time. Regardless, this is an unnecessary trap. It's an ancient trap, though. More recently, commit cf869d53172 "qmp: support out-of-band (oob) execution" spiced things up: the monitor I/O thread assigns to @cur_mon when executing commands out-of-band. Having two threads save, set and restore @cur_mon without synchronization is definitely unsafe. We can end up with @cur_mon null while the main thread runs monitor code, or non-null while it runs non-monitor code. We could fix this by making the I/O thread not mess with @cur_mon, but that would leave the trap armed and ready. Instead, make @cur_mon thread-local. It's now reliably null unless the thread is running monitor code. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> [peterx: update subject and commit message written by Markus] Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180720033451.32710-1-peterx@redhat.com>
2018-07-16monitor: Fix tracepoint crash on JSON syntax errorMarkus Armbruster1-1/+1
When tracepoint handle_qmp_command is enabled, we crash on JSON syntax errors. Broken in commit 1cc37471525. Fix by skipping the tracepoint on JSON syntax error. Before the flawed commit, we skipped it by returning early. Fixes: CID 1394216 Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180716091012.29510-1-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2018-07-11monitor: fix double-free of request errorMarc-André Lureau1-0/+1
qmp_error_response() will free the given error. Fix double-free in later qmp_request_free(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180705164201.9853-1-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Fixes: 1cc37471525d03f963bc71d724f0dc9eab888fc1 Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-05Merge remote-tracking branch ↵Peter Maydell1-295/+212
'remotes/armbru/tags/pull-monitor-2018-07-03-v2' into staging Monitor patches for 2018-07-03 # gpg: Signature made Tue 03 Jul 2018 22:20:13 BST # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-monitor-2018-07-03-v2: (32 commits) qapi: Polish command flags documentation in qapi-code-gen.txt monitor: Improve some comments qmp: Clean up capability negotiation after commit 02130314d8c qobject: Let qobject_from_jsonf() fail instead of abort qmp: Switch timestamp_put() to qdict_from_jsonf_nofail() qmp: Add some comments around null responses qmp: Simplify monitor_qmp_respond() qmp: Replace get_qmp_greeting() by qmp_greeting() qmp: Replace monitor_json_emitter{,raw}() by qmp_{queue,send}_response() qmp: Use QDict * instead of QObject * for response objects qmp: De-duplicate error response building qobject: New qdict_from_jsonf_nofail() monitor: Peel off @mon_global wrapper monitor: Rename use_io_thr to use_io_thread qmp: Don't let JSON errors jump the queue qmp: Don't let malformed in-band commands jump the queue tests/qmp-test: Demonstrate QMP errors jumping the queue qmp: Simplify code around monitor_qmp_dispatch_one() qmp: Always free QMPRequest with qmp_request_free() qmp: Revert change to handle_qmp_command tracepoint ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-03monitor: Improve some commentsMarkus Armbruster1-55/+45
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-32-armbru@redhat.com>
2018-07-03qmp: Clean up capability negotiation after commit 02130314d8cMarkus Armbruster1-51/+38
qmp_greeting() offers capabilities to the client, and qmp_qmp_capabilities() accepts or denies capabilities requested by the client. The two compute the set of available capabilities independently. Not nice. Clean this up as follows. Compute available capabilities just once in monitor_qmp_caps_reset(), and store them in Monitor member qmp.capab_offered[]. Have qmp_greeting() and qmp_qmp_capabilities() use that. Both are now oblivious of capability details. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-31-armbru@redhat.com>
2018-07-03qmp: Simplify monitor_qmp_respond()Markus Armbruster1-16/+10
monitor_qmp_respond() takes both a response object and an error object. If an error object is non-null, the response object must be null, and the response is built from the error object. Of the two callers, one always passes a null response object, and one a null error object. Move building the response object from the error object to the latter, and drop the error object parameter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-27-armbru@redhat.com>
2018-07-03qmp: Replace get_qmp_greeting() by qmp_greeting()Markus Armbruster1-6/+7
get_qmp_greeting() returns a QDict * as QObject *. It's caller converts it right back. Return QDict * instead. While there, rename to qmp_greeting(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-26-armbru@redhat.com>
2018-07-03qmp: Replace monitor_json_emitter{,raw}() by qmp_{queue,send}_response()Markus Armbruster1-11/+10
monitor_json_emitter() and monitor_json_emitter_raw() are unnecessarily general: they can send arbitrary JSON values, even though we only ever use them for QMP, which may send only JSON objects. Specialize the argument from QObject * to QDict *, and rename to qmp_queue_response(), qmp_send_response(). All callers but one lose an upcast. The lone exception gains a downcast; the next commit will get rid of it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-25-armbru@redhat.com>
generated by cgit v1.1 at 2024-12-27 05:18:14 +0000